HEAVY TRANSPORT

AXLE SPARES
HEAVY TRANSPORT

AXLE SPARES

A 3 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: QUICK REFERENCE GUIDE

TRAILER BRAKE DRUMS TRUCK BRAKE DRUMS

HEAVY TRANSPORT
PART NO. Suits Brake Size PAGE PART NO. Suits Brake Size PAGE
WT6610 ROR 311 x 190 A7 WT6643 KENWORTH 419 x 127 A9
WT6612 PROPAR 311 x 203 A7 WT6655 FREIGHTLINER 419 x 127 A9
WT6624 IMT F22MX 311 x 190 A7 WT6603 ROCKWELL 419 x 178 A10
WT6625 IMT F22 311 x 203 A7 WT6605 IMT /PROPAR/ 419 x 178 A10
ROR
WT6630 ROR 311 x 203 A7
WT6606 MACK 419 x 178 A10
WT6633 DANA 311x 190 A7
WT6611 IMT A/F22 419 x 178 A10
WT6613 YORK 335 x 210 A7
WT6614 ROCKWELL 419 x 178 A10
WT6632 YORK 335 x 210 A7
WT6609 ROR 419 x 178 A10
WT6607 ROR 350 x 200 A8
WT6645 HINO 406 x 151 A10
WT6608 ROR 350 x 200 A8
WT6646 HINO 406 x 200 A10
WT6623 IMT FE 381 x 178 A8
WT6621 NISSAN 410 x 219 A11
WT6627 ROR 381 X 219 A8
WT6644 NISSAN 410 x 219 A11
WT6628 IMT FE 381 x 178 A8
WT6647 NISSAN 410 x 160 A11
WT6634 DANA 381 x 219 A8
WT6641 VOLVO 410 x 200 A11
WT6653 BPW 360 x 200 A8
VO8412 VOLVO 410 x 160 A11
WT6604 YORK 394 x 178 A9
VO8413 VOLVO 410 x 200 A11
WT6601 PROPAR 419 x 178 A9
WT6602T COMMON 5 419 x 178 A9
SPOKE

WT6617 IMT FW 419 x 127 A9

WT6622 IMT FW 419 x 127 A9
WT6626 IMT FW 419 x 127 A9
1/064/0280/00 SAF 367 X 180 A11

TRAILER BRAKE ROTORS TRUCK BRAKE ROTORS

PART NO. Suits PAGE PART NO. Suits PAGE
WT6810 ROR A12 WT6815 DAF A12
WT6803 BPW A12 WT6807 IVECO A12
WT6809 BPW A12 WT6808 IVECO A12
WT6801 ROR A13 WT6800 MAN A13
WT6802 ROR A13 WT6804 MERCEDES A13
CT808 IMT A13 WT6806 SCANIA A13
CT826 IMT A13 WT6811 VOLVO A13
WT6812 VOLVO A14
WT6814 VOLVO A14
WT6813 VOLVO A14
WT6817 FREIGHTLINER A14

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 4

 HEAVY TRANSPORT
AXLE SPARES: BRAKE DRUMS MAINTENANCE TIPS

BASICS
• Schedule thorough regular inspections of brake systems.
HEAVY TRANSPORT

This will greatly reduce brake cost-per-kilometre

• The finished diameter of a rebored brake drum should
not exceed 3mm over the original measurement GREASE STAINED DRUMS
• Upon checking, one may find discoloured spots on the
• Check carefully for the following common problems... brake drum surface, with oil or grease splattered on the
brake assembly
• The problem may be caused by a faulty lubrication
system or improper greasing of the brake cams
CRACKED DRUMS
• Excessive heating and cooling may cause a brake drum • To correct the problem, repair the source of the oil or
to crack all the way through the entire wall grease leak, clean the entire assembly, and replace
brake linings if they are soaked with oil or grease
• Repeated cracking problems may indicate that the
drums or brake system are inadequate for the
particular application
• If the drums and brake system are correctly rated for the SCORED DRUMS
specific application, repeated cracking could indicate • This problem is indicated by a grooved appearance of the
misuse in braking application braking surface and excessive wear of the lining
• Check the brake system for balance, paying particular • If the grooving is severe, the drum can be machined
attention to the brake linings. These should have the within established tolerances
friction ratings recommended by the original equipment
manufacturer. The radius of the lining must correspond • If the scoring is not excessive and the inside diameter of
with that of the replacement drum, otherwise uneven the braking surface falls within allowable tolerances, the
wear will take place and will dramatically shorten linings may be replaced to correct the problem
lining life • Inspect the entire braking system to determine if
• Replace cracked drums immediately excessive amounts of abrasive material are entering
the braking system

HEAT CRAZING
• Heat crazing is indicated when the brake surface shows POLISHED DRUMS
fine hairline cracks. It is a normal condition of the brake • If inspection shows a mirror-like finish on the braking
drum caused by constant heating and cooling of the surface, correct the problem by removing the gloss with
braking surface eighty grit emery cloth
• Heat crazing does not impair braking performance, • If the problem consistantly recurs, check the linings for
but one should check that deep cracks have not proper friction rating. If the linings are glazed, ask the
developed. If deep cracks are present, replace the vehicle manufacturer to recommend an alternative
brake drum immediately lining material

OUT-OF-ROUND DRUMS HEAT-SPOTTED DRUMS

• This condition is signified by more wear occuring on one • Hard, slightly raised dark coloured spots on the braking
side of the brake linings and variations in drum diameter surface, together with uneven wear, are indications of
at different points on the braking surface this problem
• Within allowable tolerances, the drums can be machined • It may also be indicated by a pulsating sensation upon
to restore concentricity. Drums should not be machined applying the brake, or excessive noise on braking
to exceed a maximum rebore limit of 3mm and wear • Drums should be machined to restore their concentricity
should not exceed 3mm. Drums falling outside these by removal of the hard raised areas. If boring and
tolerances should be replaced with new brake drums grinding does not remove the spots, the drums should
be replaced
• Check brake linings for uneven wear factors. Replace if
necessary to restore maximum braking efficiency
OVERSIZED DRUMS
• Check for uneven lining wear or braking surface diameter
measurements in excess of allowable tolerances. If
oversize, the brake drum and lining should be replaced

A 5 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: HELP FORM

HEAVY TRANSPORT
For help in identifying a brake drum please provide as much information as possible using the form below:

Application location: Front Rear Trailer

Vehicle manufacturer:

Model number:

Axle manufacturer:

Axle number:

Manufacturer’s drum number:

Spigot diametre:

Bolt circle diametre (pcd):

Size and number of bolt holes:

Brake surface width:

Inside diametre:

Outside diametre:

Overall drum depth:

Any other design features?

PLEASE COMPLETE & RETURN TO YOUR LOCAL TWL BRANCH

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 6

 HEAVY TRANSPORT
AXLE SPARES: BRAKE DRUMS

BRAKE DRUMS
311MM DIAMETER BRAKE
HEAVY TRANSPORT

WT6624 IMT F22MX (606189, DT215) WT6625 IMT F22 ( 63637)

MM MM
Spigot size: 228.6 Spigot size: 177.8
Brake size: 311 x 190 Brake size: 311 x 203
Inside diameter: 311 Inside diameter: 311
Brake surface width: 270.5 Brake surface width: 214.3
Overall drum depth: 285 Overall drum depth: 232.5
PCD: 275 PCD: 209.55
Hole diameter: 25 Hole diameter: 13.5
No. Of bolt holes: 8 No. Of bolt holes: 6

WT6633 DANA DT214 WT6630 ROR 3 SPOKE (63617)

MM MM
Spigot size: 183 Spigot size: 215.9
Brake size: 311 x 190 Brake size: 413 x 203
Inside diameter: 311 Inside diameter: 311
Brake surface width: 225.4 Brake surface width: 213
Overall drum depth: 289.4 Overall drum depth: 232.5
PCD: 225 PCD: 254
Hole diameter: 25 Hole diameter: 16.5
No. Of bolt holes: 10 No. Of bolt holes: 9

BRAKE DRUMS
335MM DIAMETER BRAKE
WT6610 ROR - TM SERIES (21018963) WT6613 YORK METRIC LOW LOADER YK/12/1 19.5
MM MM
Spigot Size 183 Spigot size: 178
Brake Size 311 x 190 Brake size: 335 x 210
Inside Diameter 311 Inside diameter: 335
Brake Surface Width 200 Brake surface width: 212
Overall Drum Depth 260 Overall drum depth: 270
PCD: 225 PCD: 225
Hole Diameter 24.4 Hole diameter: 23.6
No, Of Bolt Holes 10 No. Of bolt holes: 10

WT6612 PROPAR 6 SPOKE DRUM WT6632 YORK ( 787704, DT219)

MM MM
Spigot size: 184.2 Spigot size: 178
Brake size: 311 x 203 Brake size: 335 x 210
Inside diameter: 311 Inside diameter: 335
Brake surface width: 210 Brake surface width: 246
Overall drum depth: Overall drum depth: 270
PCD: 222.25 PCD: 225
Hole diameter: 20 Hole diameter: 24.5
No. Of bolt holes: 9 No. Of bolt holes: 8

A 7 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: BRAKE DRUMS

BRAKE DRUMS BRAKE DRUMS

350MM DIAMETER BRAKE 380MM DIAMETER BRAKE

HEAVY TRANSPORT
WT6607 BMX ROR (21209701) WT6623 IMT FE (380180/8, DT217)
MM MM
Spigot size: 183 Spigot size: 228.6
Brake size: 350 x 200 Brake size: 381 x 178
Inside diameter: 350 Inside diameter: 381
Brake surface width: 214 Brake surface width: 210.5
Overall drum depth: 265 Overall drum depth: 270
PCD: 225 PCD: 275
Hole diameter: 24.5 Hole diameter: 25
No. Of bolt holes: 10 No. Of bolt holes: 8

WT6608 ROR BMX (21211966) WT6628 IMT FE (380180/10, DT221)

MM MM
Spigot Size 225.4 Spigot size: 223
Brake Size 350 x 200 Brake size: 381 x 178
Inside Diameter 350 Inside diameter: 381
Brake Surface Width 214 Brake surface width: 210.5
Overall Drum Depth 265 Overall drum depth: 270
PCD: 275 PCD: 285.75
Hole Diameter 24.5 Hole diameter: 25
No, Of Bolt Holes 8 No. Of bolt holes: 10

BRAKE DRUMS
360MM DIAMETER BRAKE
WT6653 BPW ECO (0310990220 ) WT6627 ROR TB (91725B)
MM MM
Spigot size: 230 Spigot size: 223
Brake size: 360 x 200 Brake size: 381 x 219
Inside diameter: 360 Inside diameter: 381
Brake surface width: 208 Brake surface width: 235
Overall drum depth: 260 Overall drum depth: 294.5
PCD: 274 PCD: 285.75
Hole diameter: 23 Hole diameter: 25
No. Of bolt holes: 8 No. Of bolt holes: 10

WT6634 DANA ( 3744A, 61989, DT210)

MM
Spigot size: 228.60
Brake size: 381 x 219
Inside diameter: 381
Brake surface width: 232.2
Overall drum depth: 294.5
PCD: 275
Hole diameter: 25
No. Of bolt holes: 8

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 8

 HEAVY TRANSPORT
AXLE SPARES: BRAKE DRUMS

BRAKE DRUMS
394MM DIAMETER BRAKE
HEAVY TRANSPORT

WT6604 YORK 160 SERIES ( 500761) WT6643 COMMON KENWORTH, FREIGHTLINER, MACK,
MM WESTERN STAR, STIRLING FRONT (DF103V)
Spigot size: 282.8 MM
Brake size: 394 x 178 Spigot size: 223
Inside diameter: 394 Brake size: 419 x 127
Brake surface width: 190 Inside diameter: 419
Overall drum depth: 235 Brake surface width: 148.6
PCD: 335 Overall drum depth: 238
Hole diameter: 23.6 PCD: 285.75
No. Of bolt holes: 10 Hole diameter: 25
No. Of bolt holes: 10

BRAKE DRUMS
419MM / 420MM DIAMETER BRAKE
WT6617 IMT FW22 ( 66255, 66350) WT6655 FREIGHTLINER FRONT
MM MM
Spigot size: 285.75 Spigot size: 223
Brake size: 419 x 127 Brake size: 419 x 127
Inside diameter: 419 Inside diameter: 419
Brake surface width: 154 Brake surface width: 139.7
Overall drum depth: 233 Overall drum depth: 229.7
PCD: 335 PCD: 285.75
Hole diameter: 25 Hole diameter: 25
No. Of bolt holes: 10 No. Of bolt holes: 10

WT6622 IMT FW22 ( 63447, DT234) WT6601 PROPAR SPOKE TRAILER DRUM
MM MM
Spigot size: 239.78 Spigot size: 241.3
Brake size: 419 x 127 Brake size: 178
Inside diameter: 419 Inside diameter: 419.1
Brake surface width: 138.2 Brake surface width: 193.7
Overall drum depth: 159.5 Overall drum depth: 222.3
PCD: 279.4 PCD: 285.75
Hole diameter: 19.8 Hole diameter: 21
No. Of bolt holes: 5+6 No. Of bolt holes: 5+6

WT6626 IMT FW22 ( 68985, DT287) WT6602T COMMON 5 SPOKE TRAILER

MM MM
Spigot size: 223 Spigot size: 239.78
Brake size: 419 x 127 Brake size: 419 x 178
Inside diameter: 419 Inside diameter: 419
Brake surface width: 139 Brake surface width: 193.3
Overall drum depth: 218 Overall drum depth: 213
PCD: 285.75 PCD: 279
Hole diameter: 25 Hole diameter: 19.8 x 16.7
No. Of bolt holes: 10 No. Of bolt holes: 5+6

A 9 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: BRAKE DRUMS

BRAKE DRUMS
419MM / 420MM DIAMETER BRAKE

HEAVY TRANSPORT
WT6603 ROCKWELL DRIVE 5 + 6 SPOKE 606055 WT6614 ROCKWELL DRIVE OUTBOARD MOUNT
MM MM
Spigot size: 285.75 Spigot size: 285.75
Brake size: 419 x 178 Brake size: 419 x 178
Inside diameter: 419 Inside diameter: 419
Brake surface width: 188 Brake surface width: 190
Overall drum depth: 215.9 Overall drum depth: 267
PCD: 323.85 PCD: 335
Hole diameter: 19.8 Hole diameter: 25
No. Of bolt holes: 5+6 No. Of bolt holes: 10

WT6605 COMMON IMT / PROPAR/ ROR WT6609 ROR - TE SERIES ( 21220183)

MM MM
Spigot size: 282 Spigot Size 282.6
Brake size: 419 x 178 Brake Size 419 x 178
Inside diameter: 419 Inside Diameter 419
Brake surface width: 206 Brake Surface Width 192
Overall drum depth: 248 Overall Drum Depth 238
PCD: 335 PCD: 335
Hole diameter: 25 Hole Diameter 24.5
No. Of bolt holes: 10 No, Of Bolt Holes 10

WT6606 MACK REAR ( 17QJ483 , DR188) WT6645 FS/FY HINO FRONT DRUM 11540.122,
MM 43512.4090, KAF224GD
Spigot size: 279 MM
Brake size: 419 x 177.8 Spigot size: 281
Inside diameter: 419 Brake size: 406 x 151
Brake surface width: 188 Inside diameter: 406
Overall drum depth: 215 Brake surface width: 160
PCD: 317.50 Overall drum depth: 222
Hole diameter: 16.65 PCD: 335
No. Of bolt holes: 5+6 Hole diameter:
No. Of bolt holes: 10

WT6611 IMT A/F22 (66884) WT6646 FS/FY HINO REAR BRAKE DRUM, 11540.123,
MM 43512.4100, KAF248GA
Spigot size: 223 MM
Brake size: 419 x 178 Spigot size: 282
Inside diameter: 419 Brake size: 406 x 200
Brake surface width: 199.9 Inside diameter: 406
Overall drum depth: 268.3 Brake surface width: 225
PCD: 285.75 Overall drum depth: 285
Hole diameter: 25 PCD: 335
No. Of bolt holes: 10 Hole diameter:
No. Of bolt holes: 10

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 10

 HEAVY TRANSPORT
AXLE SPARES: BRAKE DRUMS

WT6621 NISSAN CW380 OUTBOARD 43207.9017, WT6641 VOLVO REAR ( 1599011)

11540.012, KAF335GA MM
HEAVY TRANSPORT

MM Spigot size: 282

Spigot size: 281 Brake size: 410 x 200
Brake size: 410 x 219 Inside diameter: 410
Inside diameter: 410 Brake surface width: 217
Brake surface width: 232 Overall drum depth: 245
Overall drum depth: 314 PCD: 335
PCD: 335 Hole diameter: 28
Hole diameter: No. Of bolt holes: 10
No. Of bolt holes: 10

WT6644 COMMON NISSAN INBOARD REAR DRUM, VO8412 VOLVO FRONT DRUM (DR155)
43207.90202, 11540.089, KAF335GA MM
MM Spigot Size: 282
Spigot size: 280 Brake Size: 410 x 160
Brake size: 410 x 219 Inside Diameter: 410
Inside diameter: 410 Brake Surface Width: 182
Brake surface width: 230 Overall Drum Depth: 249
Overall drum depth: 260 PCD: 335
PCD: 335 Hole Diameter: 28 + 14
Hole diameter: No, Of Bolt Holes: 10 + 2
No. Of bolt holes: 10

WT6647 CWCG380/400 NISSAN FRONT VO8413 VOLVO REAR DRUM (DR156)

MM MM
Spigot size: 280 Spigot Size: 282
Brake size: 410 x 160 Brake Size: 410 x 200
Inside diameter: 410 Inside Diameter: 410
Brake surface width: 160 Brake Surface Width: 207
Overall drum depth: 190 Overall Drum Depth: 282
PCD: 335 PCD: 335
Hole diameter: 26 Hole Diameter: 28 + 14
No. Of bolt holes: 10 No, Of Bolt Holes: 10 + 2

1/064/0280/00 SAF COMMON 19.5 SKRS9037

MM
Spigot size: 230
Brake size: 367 x 180
Inside diameter: 367
Brake surface width: 210
Overall drum depth: 279
PCD: 275
Hole diameter: 23
No. Of bolt holes: 8

FULL RANGE OF SAF BRAKE DRUMS AVAILABLE.

A 11 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: HUBS & ROTORS

WT6601H PROPAR 5 SPOKE WT6803 BPW ECOMAX - SKH SERIES

(KNORR SB3745 CALIPER)

HEAVY TRANSPORT
MM
Bearing inner HM518445/10 MM
& outer: Spigot Size: 230
Seal: CR42628 Rotor Diameter: 377
Rotor Thickness: 45
Studs: WT6001
Overall Depth: 160
Nuts: WT6002 PCD: 273
Hole Diameter: M23
Bolt Holes: 8
Cross Reference: 0308834010,
WT6604HUB YORK 160 SERIES (50165) 10 STUD 0308834017
Pads to Suit: CVP036K /
MM WDP036K
Bearing outer: 33213
Bearing inner: HM218248/10 WT6809 BPW ECO PLUS (SB6000 CALIPER)
Bearing seal: WT4522
MM
PCD: 335 Spigot Size: 290
No. Of bolt holes: 10 Rotor Diameter: 377
Rotor Thickness: 45
Overall Depth: 160
PCD: 335
WT6605HUB IMT & TM ROR 420 X 180 ENGLISH& DIN
Hole Diameter: 23
FITTING WAS Q3582
Bolt Holes: 10
MM Cross Reference: 308834060
Bearing outer: 33123 Pads to Suit: CVP036K /
WDP036K
Bearing inner: HM21824810
Bearing seal: CR46303
Studs LH: WT6119
WT6815 DAF CF SERIES 65,75,85,95 (00-)
FRONT & REAR
Studs RH: WT6120
ISO: 24738/150
MM
Spigot size: N/A
PCD: 335
Rotor diameter: 432
No. Of bolt holes: 10 Rotor thickness: 45
Overall rotor depth: 45
PCD: N/A
Hole diameter: N/A
Bolt holes: N/A
Cross reference: 1387439,
14004,
1640561
Pads to suit: CVP020K

WT6810 BPW - SKH SERIES WT6807 IVECO EUROSTAR & EUROTECH ALL MODELS
(KNORR SB3745 CALIPER) (03-) (98-) FRONT
MM MM
Spigot size: 222 Spigot Size: 210
Rotor diameter: 377 Rotor Diameter: 436
Rotor thickness: 45 Rotor Thickness: 45
Overall rotor depth: 165 Overall Depth: 139
PCD: 285 PCD: 240
Hole diameter: M23 Hole Diameter: 16
Bolt holes: 10 Bolt Holes: 12
Cross reference: 0308834070, Cross Reference: 01906461,
0308834070, 1906438,
0308834077 ECD108,
Pads to suit: CVP036K / II37654
WDP036K Pads to Suit: CVP020K /
WDP020K

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 12

 HEAVY TRANSPORT
AXLE SPARES: ROTORS

WT6808 IVECO EUROSTAR & EUROTECH ALL MODELS WT6806 SCANIA 4 SERIES (96-) FRONT & REAR
(98-) FRONT WITH ABS (KNORR SB7000 CALIPER)
HEAVY TRANSPORT

MM MM
Spigot Size: 210 Spigot size: 208
Rotor Diameter: 436 Rotor diameter: 430
Rotor Thickness: 45 Rotor thickness: 45
Overall Depth: 139 Overall rotor depth: 161
PCD: 240 PCD: 237
Hole Diameter: 16 Hole diameter: M16
Bolt Holes: 12 Bolt holes: 10
Cross Reference: 01906461, Cross reference: 1402272,
1906438, 18521873,
ECD108, 83137792,
II37654 955798
Pads to Suit CVP020K / Pads to suit: CVP020 /
WDP020K WDP020K

WT6800 MAN M2000 12 SERIES (96-) FRONT WT6804 MERCEDES BENZ ACTROS 1831-3357
(KNORR CALIPER) (96-) FRONT & REAR
MM MM
Spigot size: 162 Spigot size: 211
Rotor diameter: 377 Rotor diameter: 430
Rotor thickness: 45 Rotor thickness: 45
Overall rotor depth: 128 Overall rotor depth: 132
PCD: 195 PCD: 238
Hole diameter: M14 Hole diameter: M14
Bolt holes: 10 Bolt holes: 10
Cross reference: 8150803027, Cross reference: 9424211212,
1508030057, 14213,
MAN103, 9424210912,
MBR5014 9424211112,
Pads to suit: CVP036K / 94211212,
WDP036K 955783,
MNE1065
Pads to suit: CVP024 /
WDP024K

WT6801 LM SERIES MERITOR (DX195) 99-05 WT6802 LM SERIES MERITOR (DX195) 99-05 TM
MM (DX195) 99-05
Spigot size: 222 MM
Rotor diameter: 378 Spigot size: 225
Rotor thickness: 45 Rotor diameter: 378
Overall rotor depth: 150 Rotor thickness: 45
PCD: 280 Overall rotor depth: 150
Hole diameter: M16 PCD: 275
Bolt holes: 10 Hole diameter: M24
Cross reference: 21225115, Bolt holes: 8
80176, Cross reference: 21224263,
82367472, 3159, RO1101,
RO1017 ROR101,
Pads to suit: CVP024 / MBR9014
WDP024K Pads to suit: CVP024 /
WDP024K

A 13 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: ROTORS

WT6811 VOLVO FH SERIES (00-) FRONT WT6813 VOLVO FL SERIES – 19.5” WHEELS – DUCO
MM CALIPER (OO-) FRONT

HEAVY TRANSPORT
Spigot size: 24 teeth in MM
location bore Spigot size: 106
Rotor diameter: 434 Rotor diameter: 375
Rotor thickness: 45 Rotor thickness: 45
Overall rotor depth: 45 Overall rotor depth: 130
PCD: n/a PCD: 138
Hole diameter: n/a Hole diameter: 14.5
Bolt holes: n/a Bolt holes: 14
Cross reference: 8551042, Cross reference: 3095672,
3092710, MBR9000,
VOL108, VO1067
VO1068
Pads to suit: CVP023K
Pads to suit: CVP023K

WT6812 VOLVO FH SERIES (00-) REAR WT6817 FREIGHTLINER

MM MM
Spigot size: N/A Spigot Size: 220
Rotor diameter: 377 Rotor Diameter: 430
Rotor thickness: 45 Rotor Thickness: 45
Overall rotor depth: 45 Overall Depth: 139
PCD: N/A Bolt Holes: 10
Hole diameter: N/A Cross Reference: 802081,
Bolt holes: N/A 45104V
Cross reference: 85103809, Pads to Suit: CVP094
VO1072
Pads to suit: CVP023K

WT6814 VOLVO FL SERIES - 19.5" WHEELS - DUCO CT808 IMT DISC BRAKE AXLES
CALIPER (00-) REAR MM
MM Rotor Diameter 375
Spigot size: 225
Rotor Thickness 45
Rotor diameter: 375
Rotor thickness: 45
Overall rotor depth: 150
PCD: 275
Hole diameter: 20
Bolt holes: 8
Cross reference: 3095673, CT826 IMT DISC BRAKE AXLES
68323233,
MBR9001, MM
VO1070 Rotor Diameter 330
Pads to suit: CVP023K
Rotor Thickness 45

FOR SAF ROTORS REFER TO PAGES A32 - A33

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 14

 HEAVY TRANSPORT
AXLE SPARES: BRAKE HARDWARE KITS

PART NO. WT3329

HEAVY TRANSPORT

SUITS: IMT axles

BRAKE: 420 or 380mm dia drum, Qshoes
INTERCHANGES WITH: Batco (08-108840/44), Euclid (E6999SHD),
Meritor (8000MBHD), K1007

PART NO. WT3331

SUITS: Common to many trailer and drive axles

(MOSS / IMT / DANA / MERITOR /MERITOR DRIVE
AXLE)
BRAKE: •420 & 380mm dia drum
•P shoes
INTERCHANGES WITH: Euclid (E1816 SHD), Meritor (R509001)

PART NO. WT3332

SUITS: Common to many trailer and drive axles

(MOSS / IMT / DANA / MERITOR /MERITOR DRIVE
AXLE / HENDRICKSON
BRAKE: •20 & 380mm dia drum
•Q Shoes
INTERCHANGES WITH: Batco (08-18830/34), Euclid (E-2769SHD), Meritor
Kit (8000HD)

PART NO. WT3333

SUITS: Fruehauf low loader

BRAKE: •311mm dia drum
•P shoes
INTERCHANGES WITH: Batco (08-107700), Euclid (E2286)

PART NO. WT3334

SUITS: Fruehauf XEM

BRAKE: •420mm dia drum
•Q shoes
INTERCHANGES WITH: Batco (08-109101/05), Euclid (E3710S),
Batco (08-109101/05)

A 15 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: BRAKE HARDWARE KITS

PART NO. WT3335

HEAVY TRANSPORT
SUITS: Eaton drive axle
BRAKE: •420mm dia drum
•Q shoe
INTERCHANGES WITH: Batco (08-114900), Euclid (E10244/S), OEM
(314147), Batco (08-114900)

PART NO. WT3336

SUITS: Low loader / DANA / IMT

BRAKE: •311mm dia drum
•Q shoes
INTERCHANGES WITH: Batco (08-114600), Euclid (E9283), Batco (08-
114600)

PART NO. WT3337

SUITS: Low loader / DANA / IMT

BRAKE: •311mm dia drum
•P shoes
INTERCHANGES WITH: Batco (08-1174), Euclid (E9281)

PART NO. WT3338

SUITS: OR Forged Anchor Brackets

BRAKE: •420 & 350mm dia drum
•Q shoes
INTERCHANGES WITH: Meritor (AXL126)

PART NO. WT3339

SUITS: ROR Low Loader / (Meritor UK)

BRAKE: •311mm dia drum
•Q shoes
INTERCHANGES WITH: Meritor (AXL117)

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 16

 HEAVY TRANSPORT
AXLE SPARES: BRAKE HARDWARE KITS

PART NO. WT3340

HEAVY TRANSPORT

SUITS: ROR LOW LOADER

BRAKE: •311MM DIA DRUM
•P SHOES

PART NO. WT3341

SUITS: ROR / LM Meritor UK

BRAKE: •420mm dia drum
•Q shoes
INTERCHANGES WITH: Meritor (AXL-LM4)

PART NO. WT3342

SUITS: Dana Low Loader Axle

BRAKE: • 311mm dia drum
• Q shoes
INTERCHANGES WITH: Batco (08-104900), Euclid (E10756), Batco (06-
104900) to Hendrickson ( HK49-150)

PART NO. WT3343

SUITS: Low Loader / IMT

BRAKE: •311mm dia drum
•Full enclosed P shoe
•Special 2 piece rollers
INTERCHANGES WITH: Batco (08-1074), Euclid (E2402HD)

PART NO. WT3344

SUITS: York Low Loader Axle

BRAKE: 311mm dia drum, P shoes

A 17 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: BRAKE HARDWARE KITS

PART NO. WT3345

HEAVY TRANSPORT
SUITS: York Axles
BRAKE: 335mm dia drum, P shoes

PART NO. WT3347

SUITS: ROR (Fabricated Anchor Bracket)

BRAKE: 420mm Diameter Brake
INTERCHANGES WITH: AXL125

PART NO. WT8007

SUITS: York Axle

BRAKE: 394mm dia drum, P shoes (WT5036)

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 18

 HEAVY TRANSPORT
AXLE SPARES: BRAKE HARDWARE KITS
HEAVY TRANSPORT

WT3200 WT3201 WT3301 WT3304 WT3305 WT3206 WT3207

PART NO. Description: Retainer: Dia X length:

WT3200 Standard Pin Circlip WT3205 32 X 70mm

WT3201 Groove for Roll Pin Roll pin WT3204 32 X 70mm

WT3301 Long Pin multi fit Roll pin WT3204 32 X 86mm

WT3304 Heavy duty assembly (sold as complete assembly) Bolt / nut 32 X 70/10mm

WT3305 Stepped Anchor Pin Suits WT5034

WT3206 Anchor Pin Bush - grooved suits WT3204

WT3207 Anchor Pin Bush - parallel suits standard pin

PART NO. WT3303 | ANCHOR PIN & SHOE SUPPORT KIT

SUITS: P SHOES (e.g. WT5030, WT5032 etc)

CONTENTS:

Quantity: PART NO: Description:

4 WT3301 Long Anchor Pin 3-3/8” overall length

8 WT3302 Brake shoes support washers

WT3303
8 WT3202 C-washers for Anchor Pin

4 WT3204 Roll Pin

PART NO. WT3409 | ROLLER RETAINER KIT

WT3409

A 19 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: BRAKE CALIPERS

PART NO. 3/080/0032/00 LEFT HAND

PART NO. 3/080/0032/00 RIGHT HAND

HEAVY TRANSPORT
BRAND: Wabco
MODEL: PAN 19-1
FITTED TO: SAF / GIGANT / YORK
SIZE: 19.5” Wheels & 22.5” Wheels / 370mm rotor dia.
DISC PADS: 3/057/0080/00

PART NO. PAN22-LH LEFT HAND

PART NO. PAN22-RH RIGHT HAND

BRAND: Wabco
MODEL: PAN22
FITTED TO: SAF
SIZE: 22.5” Wheels only / 420mm rotor dia.
DISC PADS: 3/057/0084/00

PART NO. DB19HD LEFT HAND/RIGHT HAND

BRAND: Haldex
MODEL: DB19HD
FITTED TO: SAF
SIZE: 370mm Rotor dia.
DISC PADS: 89795

PART NO. WTKBSB6-LH LEFT HAND

PART NO. WTKBSB6-RH RIGHT HAND RE-MAN*
BRAND: Knorr Bremse – (Axial Mount)
MODEL: SB6000 / SB3745T
FITTED TO: bpw, Mercedes-Benz
DISC PADS: CVP036K/WDP036K

PART NO. WTKBSB6RH-T LEFT HAND

PART NO. WTKBSB6LH-T RIGHT HAND

BRAND: Knorr Bremse - (Radial/Tangentical Mount)

MODEL: SB6000 / SB3745T
FITTED TO: Late Model BPW
DISC PADS: CVP092 / WDP092 (Key Type)

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 20

 HEAVY TRANSPORT
AXLE SPARES: BRAKE CALIPERS

PART NO. WTKBSB7LH-0DEG LEFT HAND

PART NO. WTKBSB7RH-0DEG RIGHT HAND RE-MAN*
HEAVY TRANSPORT

BRAND: Knorr Bremse

MODEL: SB/SN7000 - 0 Degree
FITTED TO: Scania, Daf, Foden, SAF
DISC PADS: FCV1373BFE / CVP020K / WDP020K

PART NO. WTKBSB7LH-12DEG LEFT HAND

PART NO. WTKBSB7RH-12DEG RIGHT HAND RE-MAN*
BRAND: Knorr Bremse
MODEL: SB/SN7000 - Minus 12 Degrees
FITTED TO: Mercedes-Benz, Iveco, Erf
DISC PADS: FCV1373BFE / CVP020K / WDP020K
NOTE: *** Spring Brake Mounted @ Minus 12 Degrees

PART NO. WT15224836 RIGHT HAND (STYLE 1A)

PART NO. WT15224837 LEFT HAND (STYLE 1B) RE-MAN*
BRAND: Arvin Meritor
MODEL: DX195
FITTED TO: ROR Trailer Axles
CASTINGS: C15224836, C15224837, 9307-001, 9307-002,
RDX195.51, RDX195.52
DISC PADS: FCV1314B (FCV1857BFE) / CVP024K / WDP024K

NOTE: *** 6 Bolt Mount

*** Style 1A - From the back the bracket is to the RH.
*** Style 1B - From the back the bracket is to the LH.

PART NO. WT68324644 LEFT HAND

PART NO. WT68324643 RIGHT HAND RE-MAN*
BRAND: Arvin Meritor
MODEL: Elsa 195
FITTED TO: ROR Trailer Axles
CASTINGS: 68324643, 68324644, 68033772, 68033773
DISC PADS: FCV1624BFE / CVP095K / WDP095K

NOTE: *** 4 Bolt Mount *Quality Re-Manufactured

A 21 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: CAMSHAFT BUSH KITS

PART NO. WT9001

HEAVY TRANSPORT
SUITS:
• ROR Rockwell TN
• Suits Parallel Cam (1 - 1/2 inch Camshaft)
• 1 Kit Per Axle required

PART NO. WT9002

SUITS:
• ROR Rockwell
• Suits Stepped Cam ( 1-5/8 inch Camshaft)
• 1 Kit Required Per Axle

PART NO. WT9003

SUITS:
• Rockwell Q Plus (Drive)
• Suits Parallel Cam
• 1 Kit Required Per Axle

PART NO. WT9004

SUITS:
• Rockwell Drive (P Shoes)
• Suits Parallel Cam
• 1 Kit Per Axle required

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 22

 HEAVY TRANSPORT
AXLE SPARES: CAMSHAFT BUSH KITS

PART NO. WT9005

HEAVY TRANSPORT

SUITS:
• Moss / Early Rubery Owen
• Suits Parallel Cams
• 1 Kit Required Per Axle
COMMENTS:
Yellow Bush has a higher temperature strength - should go
closest to the head of the camshaft. Bracket support plates
NOT INCLUDED in kit use WT3002 (4 per axle required).

PART NO. WT9006

SUITS:
• Propar Axles - P Shoes
• Suits Parallel Cams
• 1 Kit Required Per Axle
COMMENTS:
Bracket support plates NOT INCLUDED in kit use WT3001
(4 per axle required).

PART NO. WT9006R

SUITS:
• Propar Axles XEM Q Shoes (Spherical Bush)
• Suits Parallel Cam
• 1 Kit Required Per Axle
COMMENTS:
Bracket support plates NOT INCLUDED in kit use WT3004
(2 per axle required)

PART NO. WT9007

SUITS:
• York Axle (160 Series)
• Suits Parallel Cam
• 2 Kits Per Axle required

A 23 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: CAMSHAFT BUSH KITS

PART NO. WT9009

HEAVY TRANSPORT
SUITS:
• IMT
• Suits Parallel Cam (Bronze Bush)
• 1 Kit Required Per Axle

COMMENTS:
Bracket support plates NOT INCLUDED in kit use WT3013
(4 per axle required).

PART NO. WT9009N

SUITS:
• IMT Axles
• Suits Parallel Cam
• 1 Kit Required Per Axle

COMMENTS:
Bracket support plates NOT INCLUDED in kit use WT3013
(4 per axle required).

PART NO. WT9010

SUITS:
• Dana Axles
• Suits Parallel Cam
• 1 Kit Per Axle required

PART NO. WT9011

SUITS:
• ROR Rockwell (TN Series)
• Suits Stepped Cams
• 1 Kit Required Per Axle

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 24

 HEAVY TRANSPORT
AXLE SPARES: CAMSHAFT BUSH KITS

PART NO. WT9122

HEAVY TRANSPORT

SUITS:
• ROR - Rockwell ( TM/TE 420/350)
• Suits Stepped Cams
• 2 Kits Required Per Axle

COMMENTS:
Genuine kit part number AXL122

PART NO. WT9132

SUITS:
• ROR - Rockwell BMX - TM
• Suits Stepped Cam
• 2 Kits Required per Axle

COMMENTS:
Genuine kit part number AXL132.

A 25 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: BRAKE CAMSHAFTS

HOW TO MEASURE CAMSHAFTS

HEAVY TRANSPORT
Left Hand Right Hand

WT2006

WT2024

INGERSOLL / IMT S-CAMS

Stepped or
PART NO. Hand A B Splines
Parallel
Cam Kit Axle / Brake

WT9005 / WT9007 / WT9009 / WT9009N

WT2003 LH 519 38 10 Parallel
/ WT9132 / WT9122
419mm Brake

WT9005 / WT9007 / WT9009 / WT9009N

WT2004 RH 519 38 10 Parallel
/ WT9132 / WT9123
419 mm Brake

WT2017 LH 576 38 10 Parallel WT9009 / WT9009N 419 mm Brake

WT2018 RH 576 38 10 Parallel WT9009 / WT9009N 419 mm Brake
WT2019 LH 595 38 10 Parallel WT9009 / WT9009N 419 mm Brake
WT2020 RH 595 38 10 Parallel WT9009 / WT9009N 419 mm Brake
WT2005 LH 536 38 10 Parallel WT9009 / WT9009N 311 mm Brake
WT2006 RH 536 38 10 Parallel WT9009 / WT9009N 311 mm Brake
WT2023 LH 590 38 10 Parallel WT9009 / WT9009N 311 mm Brake
WT2024 RH 590 38 10 Parallel WT9009 / WT9009N 311 mm Brake
WT2043 LH 596 38 10 Parallel WT9009 / WT9009N 380 mm Brake
WT2044 RH 596 38 10 Parallel WT9009 / WT9009N 380 mm Brake
WT2045 LH 415 38 10 Parallel WT9009 / WT9009N 380 mm Brake
WT2046 RH 415 38 10 Parallel WT9009 / WT9009N 380 mm Brake

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 26

 HEAVY TRANSPORT
AXLE SPARES: BRAKE CAMSHAFTS
HEAVY TRANSPORT

WT2054 WT2033 WT2012

ROR / ROCKWELL / MERITOR S-CAMS

Stepped or
PART NO. Hand A B Splines
Parallel
Cam Kit Axle / Brake

WT9005 (Pre 1974) WT9122 (Fab Anchor

WT2003 LH 519 38 10 Parallel
Bkt) WT9132 (Forged Anchor Bkt)
419 mm Brake

WT9005 (Pre 1974) WT9122 (Fab Anchor

WT2004 RH 519 38 10 Parallel
Bkt) WT9132 (Forged Anchor Bkt)
419 mm Brake

WT9005 (Pre 1974) WT9122 (Fab Anchor

WT2009 RH 525 38 10 Stepped
Bkt) WT9132 (Forged Anchor Bkt)
419 mm Brake

WT9005 (Pre 1974) WT9122 (Fab Anchor

WT2010 LH 525 38 10 Stepped
Bkt) WT9132 (Forged Anchor Bkt)
419 mm Brake

WT2011 LH 518 38 10 Parallel WT9132 380 mm Brake

WT2012 RH 518 38 10 Parallel WT9132 380 mm Brake

WT2033 LH 525 41 10 Stepped WT9132 BMX

WT2034 RH 525 41 10 Stepped WT9132 BMX

WT2041 LH 610 41 10 Stepped WT9132 BMX

WT2042 RH 610 41 10 Stepped WT9132 BMX

WT2035 LH 525 10 Stepped WT9002 TM / TE/ TA

WT2036 RH 525 10 Stepped WT9002 TM / TE/ TA

WT2039 LH 525 10 Stepped WT9132 TM 310 BRAKE

WT2040 RH 525 10 Stepped WT9132 TM 310 BRAKE

WT2047 LH 587 38 10 Stepped WT9122 TM, TE,TA 420 BRAKE

WT2048 RH 587 38 10 Stepped WT9122 TM, TE,TA 420 BRAKE

WT2049 RH 525 38 10 Stepped WT3346 LM 420 BRAKE

WT2050 LH 525 38 10 Stepped WT3346 LM 420 BRAKE

WT2051 LH 594 38 28 Parallel WT9001 / WT9002 Q Plus

WT2052 RH 594 38 28 Parallel WT9001 / WT9002 Q Plus

WT2053 LH 380 38 28 Parallel WT9011 Q Plus

WT2054 RH 380 38 28 Parallel WT9011 Q Plus

WT2055 LH 519 41 28 Parallel WT9011 Q Plus

WT2056 RH 519 41 28 Parallel WT9011 Q Plus

WT2057 LH 357 38 28 Parallel

WT2058 RH 357 38 28 Parallel

WT2063 RH 610 10 Stepped WT9132 TM

WT2064 LH 610 10 Stepped WT9132 TM

A 27 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: BRAKE CAMSHAFTS

YORK S-CAMS

HEAVY TRANSPORT
PART NO. Hand A B Splines Stepped or Parallel Cam Kit Axle / Brake

WT2003 LH 519 38 10 Parallel WT9007 393 mm Brake

WT2004 RH 519 38 10 Parallel WT9007 393 mm Brake
WT2025 LH 548 38 10 Parallel WT9007 311 & 350mm Brake
WT2026 RH 548 38 10 Parallel WT9007 312 & 350mm Brake
WT2037 LH 625 38 10 Parallel WT9007 313 & 350mm Brake
WT2038 RH 625 38 10 Parallel WT9007 314 & 350mm Brake

Generic Image Only

PROPAR S-CAMS
PART NO. Hand A B Splines Stepped or Parallel Cam Kit Axle / Brake

WT2001 LH 536 40 37 Parallel WT9006 / WT9006R 420 mm Brake

WT2002 RH 536 40 37 Parallel WT9006 / WT9006R 420 mm Brake
WT2007 LH 409 40 37 Parallel WT9006 / WT9006R 420 mm Brake
WT2008 RH 409 40 37 Parallel WT9006 / WT9006R 420 mm Brake
WT2029 LH 409 38 37 Parallel WT9006 / WT9006R 311 Brake
WT2030 RH 409 38 37 Parallel WT9006 / WT9006R 311 Brake
WT2031 LH 538 40 37 Parallel WT9006 / WT9006R 311 Brake
WT2032 RH 538 40 37 Parallel WT9006 / WT9006R 311 Brake

WT2007

ROCKWELL DRIVE S-CAMS

PART NO. Hand A B Splines Stepped or Parallel Cam Kit Axle / Brake

WT2013 LH 287 38 10 Parallel WT9003 / WT9004

WT2014 RH 287 38 10 Parallel WT9003 / WT9004
WT2015 LH 217 38 10 Parallel WT9003 / WT9004
WT2016 RH 217 38 10 Parallel WT9003 / WT9004
WT2021 LH 38 28 Parallel WT9003 / WT9004
WT2022 RH 38 28 Parallel WT9003 / WT9004

WT2021 WT2013

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 28

 HEAVY TRANSPORT
AXLE SPARES: SLACK ADJUSTERS

SLACK ADJUSTER -9/16 NUT SLACK ADJUSTER -19MM NUT

HEAVY TRANSPORT

PART NO. WT5020 PART NO. WT5027

Splines 10 Splines 10

Pivot 5 ,6 ,7 Pivot 5, 6, 7

SLACK ADJUSTER -9/16 NUT SLACK ADJUSTER -19MM NUT

PART NO. WT5021 PART NO. WT5028

Splines 37 Splines 10

Pivot 5 ,6 ,7 Pivot 5.5, 6.5

SLACK ADJUSTER -CRANKED SLACK ADJUSTER -19MM NUT

PART NO. WT5025 PART NO. WT5029

Splines 10 Splines 28

Pivot 6 Pivot 5, 6 ,7

SLACK ADJUSTER -9/16 NUT SLACK ADJUSTER -19MM NUT

PART NO. WT5026 PART NO. WT5029A

Splines 10 Splines 28

Pivot 5, 6, 7, 8 Pivot 5.5, 6.5

A 29 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: HUBCAPS

PART NO. CR1600 PART NO. WT4020P

HEAVY TRANSPORT
• Plastic Oil filled hubcap to • Propar Screw on hubcap.
suit Hubodometer 6 hole Hubo type use Part No:
5.5 PCD WT4020PH

PART NO. CR1643 PART NO. 343-4009

• Plastic Oil filled hubcap 6 • Stemco Oil Filled Hubcap

hole 5.5 PCD 6 Hole 5.5PCD
• Can use Part No: KA6551
•6 Hole 4½ inch PCD use
Part No: 343-4024

PART NO. CR1743S PART NO. 359-6117

• Steel Oil Filled Hubcap 6 • Hubo Window suit 343-

hole 5.5PCD 4009

PART NO. CR450434 PART NO. 359-5995

• Replacement vent plug for • Replacement window

SKF Caps. 3½ inch KA6551
• Can use Part No. KA65W
• 2¾ inch use Part No.
359-5999

• Red Vent Plug for Stemco PART NO. 401526

Cap Part No. 359-5990
• Replacement gasket

PART NO. DG6G PART NO. 343-4095

• Steel Grease filled hubcap. • Stemco Oil Filled Front

Also available for Hubo Hubcap 6 hole 6 inch PCD
and Chromed

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 30

 HEAVY TRANSPORT
AXLE SPARES: HUBCAPS
HEAVY TRANSPORT

FULL RANGE OF SAF REPLACEMENT HUBCAPS AVAILABLE

A 31 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: SAF SPARES

NEW SAF BRAKE SERVICE KITS

HEAVY TRANSPORT
New Genuine SAF brake service kits contain all the key
parts involved in the repair and maintenance of common
SAF trailer axle ends.
The kits feature superior pricing to items purchased individually
providing a more cost-effective and hassle-free solution for SAF
trailer axle maintenance.
Kits are available for all common SAF trailer axles used in New
Zealand and are available from Transport Wholesale locations
nationwide.

AXLE SET SKRZ9019W EARLY AXLE SET SKRZ9019W NZ

PART NO. 4/079/0004/80 PART NO. 4/079/0014/80

Kit Contents: Kit Contents:

Rotor 4/079/0004/00 x2 Rotor 4/079/0014/00 x2
O-Ring 4/315/0052/00 x2 O-Ring 4/315/0052/00 x2
O-Ring 4/315/0054/00 x2 O-Ring 4/315/0054/00 x2
O-Ring 4/315/0056/00 x2 O-Ring 4/315/0056/00 x2
Bolt kit 3/434/3656/00 x2 Bolt kit 3/434/3656/00 x2
Spindle Paste 5/387/0015/00 x2 Spindle Paste 5/387/0015/00 x2
Adjuster Seal 3/434/3829/00 x2 Adjuster Seal 3/434/3829/00 x2
Brake Pads 3/057/0080/00 x1 Brake Pads 3/057/0080/00 x1

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 32

 HEAVY TRANSPORT
AXLE SPARES: SAF SPARES

SKRZ9019W NZ OVERHAUL ZI9-19W OVERHAUL

HEAVY TRANSPORT

PART NO. 4/079/0014/90 PART NO. 4/079/0016/90

Kit Contents: Kit Contents:

Rotor 4/079/0014/00 x2 Rotor 4/079/0016/00 x2
O-Ring 4/315/0052/00 x2 O-Ring 4/315/0075/00 x2
O-Ring 4/315/0054/00 x2 O-Ring 4/315/0130/99 x2
O-Ring 4/315/0056/00 x2 Bolt Kit 3/434/3663/00 x2
Bolt kit 3/434/3656/00 x2 Bolt kit 3/434/3660/00 x2
Spindle Paste 5/387/0015/00 x2 Spindle Paste 5/387/0015/00 x2
Caliper 3/080/0032/00 x1 Caliper 3/080/0071/01 x1
Caliper 3/080/0033/00 x1 Caliper 3/080/0072/01 x1

ZI9-19W RELINE 3D BUSH REPLACEMENT KIT

PART NO. 4/079/0016/80 PART NO. 4/177/3028/99

Kit Contents: Kit Contents:

Rotor 4/079/0016/00 x2 Bush 4/177/3028/00 x2
O-Ring 4/315/0075/00 x2 Pivot Bolt/Nut 3/341/1048/19 x2
O-Ring 4/315/0130/99 x2 Nylon W/Pad 4/331/5029/00 x4
Bolt Kit 3/434/3663/00 x2 Ec. Washer 102x20 1/123/0001/01 x2
Bolt kit 3/434/3660/00 x2 Thrust Washer 1/101/2001/00 x2
Spindle Paste 5/387/0015/00 x2
Pads 3/057/0080/00 x1
Caliper 3/080/0033/00 x1

A 33 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ

HEAVY TRANSPORT
AXLE SPARES: SKF BEARINGS

THE POWER OF KNOWLEDGE ENGINEERING ...

HEAVY TRANSPORT
In developing commercial vehicle components, SKF invented a sophisticated life
calculation program which predicts bearing life by factoring in the precise operating
conditions of the application. This extended life rating model has resulted in a new
ISO standard (ISO 281:1990/Amd2:2000). With this in mind, Transport Wholesale
partnering with SKF New Zealand was an easy choice! SKF is currently the largest
hub supplier to European Truck and Trailer manufacturers and has the best coverage
in the aftermarket!

With the SKF range available at Transport Wholesale branches you get:
• High load carrying capacity
• High preload capability
• Optimised internal geometry
• Enhanced roller end/flange lubrication
• Low noise and vibration
• Long service life

BEARING AND SEAL KITS

PART NO: Description:

VKBA5800 SKF Steer Axle Kit. Contains HM212049/11 + HM3782/20 + CR35066

VKBA5807 F Drive Axle Kit. Contains 594A/592A + 580Q/572Q + CR47693

VKBA5811 SKF Trailer Axle Kit. Contains HM218248/10 + HM212049/11 + CR46303

VKBA5813 SKF Trailer PROPAR Axle Kit. Contains HM518445/10 + HM518445/10 + CR42627

FREEPHONE: 0508 677 704 HEAVY TRANSPORT | A 34

 HEAVY TRANSPORT
AXLE SPARES: SFK SCOTSEAL

SKF SCOTSEAL – CLASSIC

Scotseal Classic is a unitised, one piece design three lip design.
HEAVY TRANSPORT

The seal is pressfit into the hub by using a Scotseal installation tool.

SKF SCOTSEAL – LONGLIFE

Scotseal Longlife is a unitised, one piece design with four sealing
lips. The seal is pressfit into the hub by using a Scotseal
installation tool.

SKF- SCOTSEAL – PLUSXL

Scotseal PlusXL is a unitised, one piece design with four sealing
lips. The seal is pressfit into the hub without the need for
installation tools.

• Installation tools also available

SKF - SCOTSEAL COMMONLY STOCKED PART NUMBERS

Classic Longlife Plus XL Application Vehicle/ Axle
Ford, Navistar, Rockwell, Kenworth, Peterbuilt,
35066 35058 Front Axle
Freightliner, Volvo

40136S 40129 Trailer Axle Dana, Spicer, Rockwell, Eaton Standard Forge

42623S 42361 42627 Trailer Axle Propar

42672 42673 Drive Axle Mack

43752S Trailer Axle Rockwell, Eaton

45099S 45093 Drive Axle Mack

45103 45095 Front Axle Navistar

Dana, Spicer, Rockwell, Eaton, Standard Forge

46305 46308 46300 Trailer Axle
(PRO series also use CR46303)

Ford, Navistar, Rockwell, Kenworth, Peterbuilt,

47697 47693 47692 Drive Axle
Freightliner, Volvo

A 35 | HEAVY TRANSPORT 18 BRANCHES NATIONWIDE | WWW.TWLNZ.CO.NZ