Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Certificate Block 5 Pasos

    Uploaded by

    Jonathan Espinoza Mejia
    This document certifies that a 5-step test block made of A1018 steel was inspected and qualified by Mitech Co. using instruments calibrated by SGS to standards traceable to NML/ROC and NIST/USA in compliance with ISO guidelines. The block's serial number is 130801-73 and measurements of its 5 steps were all within the specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Certificate Block 5 Pasos

    Uploaded by

    Jonathan Espinoza Mejia
    14 views1 page
    This document certifies that a 5-step test block made of A1018 steel was inspected and qualified by Mitech Co. using instruments calibrated by SGS to standards traceable to NML/ROC and NIST/USA in compliance with ISO guidelines. The block's serial number is 130801-73 and measurements of its 5 steps were all within the specified tolerances.

    Original Title

    CERTIFICATE BLOCK 5 PASOS .docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document certifies that a 5-step test block made of A1018 steel was inspected and qualified by Mitech Co. using instruments calibrated by SGS to standards traceable to NML/ROC and NIST/USA in compliance with ISO guidelines. The block's serial number is 130801-73 and measurements of its 5 steps were all within the specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    14 views1 page

    Certificate Block 5 Pasos

    Uploaded by

    Jonathan Espinoza Mejia
    This document certifies that a 5-step test block made of A1018 steel was inspected and qualified by Mitech Co. using instruments calibrated by SGS to standards traceable to NML/ROC and NIST/USA in compliance with ISO guidelines. The block's serial number is 130801-73 and measurements of its 5 steps were all within the specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    Maker Calibration

    THIS IS TO CERTIFY THAT THE 5 STEP TEST BLOCK SUPPLIED TO WHOM IT MAY CONCERN WERE INSPECTED
    AND OUALFIED BY MITECH CO, LTD. THOSE ITEMS WERE INSPECTED WITH THE INSTRUMENTS CALIBRATED
    BY SGS LTD . THE STANDARDS USED TO PERFORM THIS CALIBRATION ARE TRACEABLE TO NML/ROC AND
    NIST/USA. THE CALIBRATION SYSTEM AND RECORDSARE IN COMPLIANCE WITH ISO/IEC GUIDE 25.

    Purchase Order No. Block Material Type Of Block S/N


    1707 A1018 steel 5 step block 130801-73

    Step Thickness mm Actual Thickness mm Tolerance mm Remark


    2.50 2.52 +0.02 OK
    5.00 5.02 +0.02 OK
    7.50 7.52 +0.02 OK
    10.00 10.02 +0.02 OK
    20.00 20.00 -0.00 OK

    NOTES:

    SIGNED: …. ………………………………… POSITION TECHNICIAN

    DATE: JUL 13.2017.

    You might also like