Scribd
Upload
116 views4 pages

Summary Specification Painting For Project P3Fh - Antam (System 2 & System 3)

1. The document specifies the paint system for Project P3FH-ANTAM including primary, secondary, and finish paints. 2. The primary paints include a two-component inorganic zinc rich primer and an alkyd resin anti-corrosive primer. 3. The secondary and finish paints include single component silicone, alkyd, and epoxy coatings for temperatures up to 200°C and 100°C.

Uploaded by

arga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
116 views4 pages

Summary Specification Painting For Project P3Fh - Antam (System 2 & System 3)

1. The document specifies the paint system for Project P3FH-ANTAM including primary, secondary, and finish paints. 2. The primary paints include a two-component inorganic zinc rich primer and an alkyd resin anti-corrosive primer. 3. The secondary and finish paints include single component silicone, alkyd, and epoxy coatings for temperatures up to 200°C and 100°C.

Uploaded by

arga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

SUMMARY SPECIFICATION

PAINTING FOR PROJECT P3FH - ANTAM ( Syste

PRIMARY PAINT SECONDARY PAINT


No.
Paint Description Thk Paint Description Thk

A two component, rapid recoat, fast A single component, high temperature


curing solvent base inorganic zinc rich coating, based on a mosture curing
1 ethyl silicate primer 2 x 20µ silicone binder 1 x 20µ

RESIST 65 SOLVALIT MIDTHERM

Alkyd resin based anti-corrosive primer


Alkyd gloss enamel finish
containing zinc phosphate pigment
2 2 x 35µ 2 x 30µ

PILOT QD PRIMER JOTA TC GLOSS

A two component, rapid recoat, fast A single component, intermediate temp.


curing solvent base inorganic zinc rich finish based on temperature resistant
3 ethyl silicate primer 2 x 20µ silicon and acrylic resins 1 x 20µ

RESIST 65 SOLVALIT MIDTHERM


A two component,low VOC,high solids,
Modified epoxy barrier coat to give
long terms protection in single coat
4 2 x 50µ -
application

JOTAMASTIC 70
SUMMARY SPECIFICATION
ROJECT P3FH - ANTAM ( System 2 & System 3 )

FINISH PAINT
Remarks
Paint Description Thk Color Munsell No. RAL

A single component, high temperature


coating, based on a mosture curing
silicone binder 1 x 20µ Silver 10BG 6/1 7001 Up to 200°C

SOLVALIT MIDTHERM

Alkyd gloss enamel finish


1 x 30µ Blue Gray 7.5BG 6/1.5 7042

JOTA TC GLOSS

A single component, intermediate temp.


finish based on temperature resistant
silicon and acrylic resins 1 x 20µ Silver 10BG 6/1 7001 Up to 100°C

SOLVALIT MIDTHERM
A two component,low VOC,high solids,
Modified epoxy barrier coat to give
long terms protection in single coat
3 x 50µ Blue Gray 7.5BG 6/1.5 7042
application

FUTURA CLASSIC

You might also like