Valvosider Complete Catalogue Valves

VALVOSIDER
MANUFACTURER OF VALVES
GATE VALVES
GLOBE VALVES
CHECK VALVES
STRAINERS
CATALOGUE
R. 05/17
VS
ASME
DIN
VALVOSIDER s.r.l.
Via S. Rocco, 2 - P.O. BOX 76 - 13011 Borgosesia (VC) - Italy
Phone: +39 0163 22991 - Fax: +39 0163 21537
e-mail: [email protected] - http://www.valvosider.com
Main Location in Borgosesia
Second Location in Borgosesia

VALVOSIDER
MANUFACTURER OF VALVES 1 The Company
p. 4
2 Gate valves
p. 7
3 Globe valves
p. 19
ASME
4 Check valves
p. 37
5 Strainers
p. 53
6 Gate valves
p. 59
7 Globe valves
p. 71
DIN
8 Check valvesp. 91
9 Strainers
p.109
10 Technical data
p.115
3
BORGOSESIA AREA MAP
4
COMPANY INFORMATION & LOCATION
Valvosider was founded in 1951 as a manufacturer of industrial valves and, after more than 60
years of continuous growth, has become a valve manufacturer of international reputation.
The production encompasses a wide range of valves meeting the requirements of the chemical,
petrochemical, marine, oil (on and offshore), gas and power plant industries.
Our many years of experience in producing top quality products enable us to bring industry leading
innovations to our customers.
We are certified by the following organizations:
ISO 9001:2008 RINA / IQNET
PRESSURE EQUIPMENT DIRECTIVE (2014/68/UE) - TÜV
ATEX DIRECTIVE 2014/68/UE - VALVOSIDER
API 600-0020 / AMERICAN PETROLEUM INSTITUTE
API 6D-0166 / AMERICAN PETROLEUM INSTITUTE
API 6A-0992 / AMERICAN PETROLEUM INSTITUTE
AD 2000 MERKBLATT HP0 /A4 / EN ISO 3834-2 - TÜV
API 622 / API 624 FUGITIVE EMISSION - TÜV
ISO 15848-1 Class BH FUGITIVE EMISSION - TÜV
TA-LUFT FUGITIVE EMISSION - TÜV
VDI 2440 - TÜV
FIRE SAFE API 607/BS EN ISO 10497/BS EN ISO 6755-2 - TÜV
TR CU 010/2011 & 032/2013
ACHILLES JQS
Canadian Registration Numbers (CRN)
API 591 - TÜV
SIL IEC 61508-1÷7:2010 - TÜV
Valvosider is located in Northern Italy in the town of Borgosesia between Milan and Turin,
approximately one hour drive from either city.
The closest airport is Malpensa International Airport in Milan approximately a 45 minutes drive.
Genoa is approximately 150 kilometers and is the nearest Maritime Port.
The plant is approximately 96,000 square meters with a 37,800 square meters of covered
structure.
COMPANY STRATEGY
We will continue changing the way we do business focusing on the customer’s needs and our
company’s Vision, Mission & Values.
VISION:
Valvosider S.r.l. is a family owned company committed to provide its clients with a product which
conforms with the requirements of the contract and the client's needs at a fair cost, within the
contractual delivery time, with the highest possible safety standards, while at the same time
protecting the well-being of the natural environment and our community.
MISSION:
As an international valve manufacturer it continues providing quality valves and meeting the client’s
specified requirements. Valvosider continues to be a strong source of income for the community, a
safe environment for all employees and keeps embracing new ideas and ways of operation.
Valvosider delivers what it promises to its clients building strong relationships. Let’s keep improving
our business and ourselves for that is a the reason for living.
VALUES:
Valvosider is committed of providing our clients, employees and our community with the best
product and work environment by doing always our best. Respect, integrity, support, knowledge is
our way of life.
5
VALVOSIDER
MANUFACTURER OF VALVES ASME GATE VALVES
DESCRIPTION OF A TYPICAL GATE VALVE
HANDWHEEL NUT
HANDWHEEL
YOKE SLEEVE
YOKE NUT
GREASE NIPPLE
NUT
GLAND FLANGE
EYE BOLTS
GLAND
EYE BOLT PIN
STEM PACKING
BONNET NUT
BONNET
BONNET BOLT
BACKSEAT BUSHING
BONNET GASKET
STEM
SEAT RING
GATE (WEDGE)
BODY
6
VALVOSIDER
MANUFACTURER OF VALVES ASME GATE VALVES 2
TYPE CLASS SIZES FIG. N
GATE VALVES 150 2” - 48” 450

300 2” - 48” 451
BOLTED BONNET
600 2” - 40” 452
900 2” - 24” 453
1500 2” - 24” 454
2500 2” - 12” 455
page 8
GATE VALVES 150 2” - 40” 450EB

300 2” - 40” 451EB
CRYOGENIC
600 2” - 24” 452EB
EXTENDED
BONNET 900 2” - 24” 453EB
1500 2” - 24” 454EB
page 10
GATE VALVES 150 2” - 24” 450SO

300 2” - 24” 451SO
BELLOW
SEAL 600 2” - 24” 452SO
900 2” - 16” 453SO
1500 2” - 16” 454SO
page 12
GATE VALVES 600 2” - 24” P52

900 2” - 24” P53
PRESSURE
1500 2” - 24” P54
SEAL
2500 2” - 24” P55
page 14
GATE VALVES 150 3” - 40” T50

300 3” - 40” T51
THROUGH
600 3” - 40” T52
CONDUIT
900 3” - 24” T53
1500 3” - 24” T54
page 16
7
VALVOSIDER GATE VALVES
MANUFACTURER OF VALVES ASME 150 - 300 - 600 - 900 - 1500 - 2500
standard features
V
12
11 - Description BOLTED BONNET
10 OUTSIDE SCREW AND YOKE
RISING STEM
20
NON RISING HANDWHEEL
9
RENEWABLE SEATS
16
8 - Design API 600
15 BS 1414
H1 - OPEN
7
- Face to face
H
ASME B16.10
17
19
- Flanges ASME B16.5 FROM 2” TO 24”
6 ASME B16.47 FROM ³ 26”
2 BW TO ASME B16.25
13
14 - Testing API 598
API 6D
18
BS 6755
5
D
4 - Rating ASME B16.34

3
1 - Marking MSS-SP 25
L CE - PED
THE USE OF GEAR OPERATOR IS RECOMMENDED
STARTING FROM THE FOLLOWING SIZES/CLASSES
SIZE (inches) 16" 12" 8" 6" 6" 4" - Certificates EN 10204 – 3.1 B
ASME CLASS 150 300 600 900 1500 2500
PART NAME W45x L45x M45x B45x C45x

E45x D45x F45x H45x
1 Body WCB LCB WC6 C12 C5 CF8 CF8C CF8M CF3M
2 Bonnet WCB LCB WC6 C12 C5 CF8 CF8C CF8M CF3M
3 Seat ring surface F6A (1) F6A (1) F6A (1) F6A (1) F6A (1)
F304 (1) F321 (1) F316 (1) F316L (1)
4 Wedge seat surfaces F6A (2) F6A (2) F6A (2) F6A (2) F6A (2)
F304 (2) F321 (2) F316 (2) F316L (2)
5 Stem F6A (3) F6A (3) F6A (3) F6A (3) F6A (3)
F304 (3) F321 (3) F316 (3) F316L (3)
6 Back seat F6A (3) F6A (3) F6A (3) F6A (3) F6A (3)
F304 (3) F321 (3) F316 (3) F316L (3)
7 Gland F6A (3) F6A (3) F6A (3) F6A (3) F6A (3)
F304 (3) F321 (3) F316 (3) F316L (3)
8 Gland flange A105 F316 F316 F316 F316
F316 F316 F316 F316L
9 Yoke sleeve B148 9A (4) B148 9A (4) Nod.Iron Nod.Iron B148 9A (4) B148 9A (4) B148 9A (4) B148 9A (4)
Nod.Iron
10 Yoke nut A105 A350 LF2 A105 A105 A105
F316 F316 F316 F316
11 Handwheel Steel
12 Handwheel nut A105
13 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
14 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
15 Eye bolts B7 B7 B8 B8 B8 B8 B8 B8 B8
16 Nuts 2H 2H 2H 2H 2H G8 G8 G8 G8
17 Eye bolt pin B7 B7 B7 B7 B7 B8 B8 B8 B8
18 Gasket (5) ANSI 150: S.S. reinforced graphite - ANSI 300-600-900-1500: S.S. Spiral wound reinf. graphite/RTJ - ANSI 2500: RTJ
19 Packing Graphite rings & wiper rings (6)
20 Grease nipple A105
(1) On request: faced with Stellite - Monel - Hastelloy - other materials (4) On request: Nodular Iron - Nitronic 60
(2) On request: faced with Stellite - Monel - Hastelloy - other materials (5) On request: PTFE - other materials
(3) On request: 17 Cr - Monel - Hastelloy - other materials (6) On request: PTFE - other materials
All data, subject to technical changes, are only for information and not for official use.
VALVOSIDER s.r.l. - Via S. Rocco, 2 - P.O. BOX 76 - 13011 Borgosesia (VC) - Italy
Phone:+39016322991 - Fax: +39016321537 - www.valvosider.com - e-mail: [email protected]
8
GATE VALVES VALVOSIDER
ASME 150 - 300 - 600 - 900 - 1500 - 2500 MANUFACTURER OF VALVES
FIG. N. 450 - GATE VALVES OVAL BODY ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40” 42” 48”
L RF 178 191 203 229 254 267 292 330 356 381 406 432 457 508 610 610 660 711 711 762 787 864
L BW 216 241 282 305 381 403 419 457 502 571 610 660 711 813 914 914 965 1016
1016 1168 1397 1270
D 152 178 191 229 254 279 343 406 483 533 597 635 699 813 927 984 1060 1111
1168 1289 1346 1511
V 200 200 225 250 250 300 400 500 500 600 600 700 700 800 G.O. G.O. G.O. G.O.
G.O. G.O. G.O. G.O.
H 350 420 440 480 560 600 775 1050 1240 1300 1500 1650 1800 2200 2600 2600 2600 3000
3000 3200 3200 3500
H1 400 480 510 580 695 750 980 1300 1540 1650 1900 2100 2300 2800 3350 3400 3450 3900
3950 4200 4250 4500
FIG. N. 451 - GATE VALVES ASME CLASS 300

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40” 42” 48”
L RF/BW 216 241 282 305 381 403 419 457 502 762 838 914 991 1143 13461397 1524 1626 1727 1930 1981 2235
L RTJ 232 257 298 321 397 419 435 473 518 778 854 930 1010 1165 13711422 1552 1654 1755 -- -- --
D 165 191 210 254 279 318 381 445 521 584 648 711 775 914 10351092 1149 1207 1270 1238 1289 1467
V 200 200 225 250 300 400 500 500 600 600 700 700 800 900 G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O.
H 400 430 500 530 620 730 910 1110 1240 1400 1580 1700 1900
2150 25303000 3000 3360 3360 3890 3890 4330
H1 450 490 580 630 745 880 1110 1360 1540 1750 1980 2150 2400
2750 33503850 3900 4300 3950 4950 5110 5280
FIG. N. 452 - GATE VALVES ASME CLASS 600

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40” 42” 48”
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 1092 11941397 15491651 1778 1930 2082 2286 -- --
L RTJ 295 333 359 435 511 562 663 791 841 892 994 1095 12001407 15621664 1794 1946 2099 -- -- --
D 165 191 210 273 330 356 420 508 559 603 686 743 813 940 10731130 1194 1245 1314 1321 -- --
V 200 250 250 400 400 500 600 700 700 800 900 1000 1600 G.O. G.O. G.O. G.O. G.O. G.O. G.O. -- --
H 450 500 540 670 686 810 970 1155 1330 1480 16801826 19302160 23902880 2950 3030 3090 3620 -- --
H1 500 570 620 770 810 960 1170 1410 1630 1830 2100
2280 24502800 31373680 3803 3937 4050 4687 -- --
FIG. N. 453 - GATE VALVES ASME CLASS 900 features on request

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28”
7 TOP FLANGE TO ISO 5210
L RF/BW 368 381 457 610 737 838 965 1029 1130 1219 1321 1549 --
L RTJ 371 384 460 613 740 841 968 1038 1140 1232 1334 1568 -- 7 GEAR OPERATOR
D 216 241 292 381 470 546 610 641 705 787 857 1041 -- 7 CHAIN WHEEL OPERATOR
V 250 300 400 600 650 700 900 1000 G.O. G.O. G.O. G.O. --
7 PNEUMATIC ACTUATOR
H 450 600 670 890 1114 1255 1439 1585 1639 1835 1970 2230 --
H1 500 680 770 1050 1320 1520 1750 1950 2050 2300 2500 2850 -- 7 HYDRAULIC ACTUATOR
7 ELECTRIC ACTUATOR
FIG. N. 454 - GATE VALVES ASME CLASS 1500 7 POSITION INDICATOR
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 7 LIMIT SWITCHES
L RF/BW 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943 --
L RTJ 371 473 549 711 842 1000 1146 1276 1407 1559 1686 1972 -- 7 LOCKING / INTERLOCK SYSTEM
D 216 267 311 394 483 584 673 749 826 914 984 1168 -- 7 PTFE SOFT SEATS
V 250 400 500 600 700 900 1600 1600 G.O. G.O. G.O. G.O. -- 7 STEM PROTECTION
H 450 620 760 930 1148 1336 1454 1645 1815 1835 1970 2230 --
7 STEM EXTENSION
H1 500 700 870 1090 1360 1520 1750 1950 2050 2300 2500 2850 --
7 LANTERN RING
FIG. N. 455 - GATE VALVES ASME CLASS 2500 7 EXTENDED STUFFING BOX
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 7 LIVE LOADED PACKING
L RF/BW 451 578 673 914 1022 1270 1422 -- -- -- -- -- --
7 DRAIN PLUG
L RTJ 454 584 683 927 1038 1292 1445 -- -- -- -- -- --
D 235 305 356 483 552 673 762 -- -- -- -- -- -- 7 BY PASS
V 250 400 500 600 700 G.O. G.O. -- -- -- -- -- -- 7 BW ENDS
H 450 620 760 930 1148 1255 1439 -- -- -- -- -- --
7 DIN CONNECTIONS
H1 500 700 870 1090 1360 1520 1750 -- -- -- -- -- --
All dimensions in mm (except where differently indicated) All data, subject to technical changes, are only for information and not for official use.
9
VALVOSIDER CRYOGENIC GATE VALVES
MANUFACTURER OF VALVES ASME 150 - 300 - 600 - 900 - 1500
standard features
V - Description EXTENDED BONNET
11
BOLTED BONNET
12
OUTSIDE SCREW AND YOKE
10
RISING STEM
20
9
16
RENEWABLE SEATS
8
15
- Design API 600
7 BS 1414
17 H1 - OPEN
- Face to face ASME B16.10
W
19
H
6
21 - Flanges ASME B16.5 FROM 2” TO 24”
14 ASME B16.47 FROM ³ 26”
2 BW TO ANSI B16.25
18
13 - Testing API 598
5 API 6D
4 BS 6755
3
- Rating
D
1 ASME B16.34
- Marking MSS-SP 25
L CE - PED
SIZE (inches) 16" 12" 8" 6" 6" - Certificates EN 10204 – 3.1 B
ASME CLASS 150 300 600 900 1500
options
PART NAME E45xEB F45xEB FLEXIBLE WEDGE FLEXIBLE WEDGE
1 Body CF8 CF8M PTFE INSERT
2 Bonnet CF8 CF8M RELIEF HOLE RELIEF HOLE
3 Seat ring surface F316 (1) F316 (1)
4 Wedge seat surfaces F316 (2) F316 (2)
5 Stem F316 (3) F316 (3)
6 Back seat (integral) CF8 (2) CF8M (2)
7 Gland F316 (3) F316 (3) FLOW DIRECTION FLOW DIRECTION
8 Gland flange F316 F316
9 Yoke sleeve B148 9A (4) B148 9A (4)
10 Yoke nut F316 F316
11 Handwheel Steel Steel
12 Handwheel nut A105 A105
13 Bolts B8 B8
14 Nuts G8 G8
15 Eye bolts B8 B8
16 Nuts G8 G8
17 Eye bolt pin B8 B8
18 Gasket PTFE (5) PTFE (5)
19 Packing PTFE (6) PTFE (6)
FULLY EXTRACTABLE COLD BOX
20 Grease nipple F316 F316
21 Extension F304L F316L
(2) On request: faced with Stellite - Monel - Hastelloy - other materials (5) On request: Graphite - other materials
(3) On request: 17 Cr - Monel - Hastelloy - other materials (6) On request: Graphite - other materials
10
CRYOGENIC GATE VALVES VALVOSIDER
ASME 150 - 300 - 600 - 900 - 1500 MANUFACTURER OF VALVES
FIG. N. 450EB - CRYOGENIC GATE VALVES OVAL BODY ASME CLASS 150
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40”
L RF 178 191 203 229 254 267 292 330 356 381 406 432 457 508 610 610 660 711 711 762
L BW 216 241 282 305 381 403 419 457 502 571 610 660 711 813 914 914 965 1016 1016 1168
D 152 178 191 229 254 279 343 406 483 533 597 635 699 813 927 984 1060 1111 1168 1289
V 200 200 225 250 250 300 400 500 500 600 600 700 700 800 G.O. G.O. G.O. G.O. G.O. G.O.
W 200 200 300 300 300 300 300 300 300 300 300 300 300 300 -- -- -- -- -- --
H 550 620 730 770 860 900 1075 1390 1540 1600 1800 1950 2100 2500 -- -- -- -- -- --
H1 600 690 810 870 990 1050 1280 1650 1850 1950 2200 2550 2800 3400 -- -- -- -- -- --
FIG. N. 451EB - CRYOGENIC GATE VALVES ASME CLASS 300

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40”
L RF/BW 216 241 282 305 381 403 419 457 502 762 838 914 991 1143 1346 1397 1524 1626 1727 1930
L RTJ 232 257 298 321 397 419 435 473 518 778 854 930 1010 1165 1371 1422 1552 1654 1755 --
D 165 191 210 254 279 318 381 445 521 584 648 711 775 914 1035 1092 1149 1207 1270 1238
V 200 200 225 250 300 400 500 500 600 600 700 700 800 900 G.O. G.O. G.O. G.O. G.O. G.O.
W 200 200 300 300 300 300 300 300 300 300 300 300 300 300 -- -- -- -- -- --
H 600 630 800 830 920 1030 1210 1410 1540 1700 1880 2000 2200 2600 -- -- -- -- -- --
H1 650 700 880 930 1045 1180 1280 1660 1840 2050 2280 2150 2400 2750 -- -- -- -- -- --
FIG. N. 452EB - CRYOGENIC GATE VALVES ASME CLASS 600 features on request
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L RF/BW 292 356 432 559 660 787 838 889 991 1092 1194 1397
L RTJ 295 359 435 562 663 791 841 892 994 1095 1200 1407 7 GEAR OPERATOR
D 165 210 273 356 419 508 559 603 686 743 813 940
7 CHAIN WHEEL OPERATOR
V 200 250 400 500 600 700 700 800 900 1000 1600 G.O.
W 200 300 300 300 300 300 300 300 300 300 300 300 7 PNEUMATIC ACTUATOR
H 640 840 850 1100 1260 1455 1620 1780 1980 2130 2230 2460 7 HYDRAULIC ACTUATOR
H1 700 920 950 1250 1460 1710 1930 2130 2400 2580 2730 3100
7 ELECTRIC ACTUATOR
FIG. N. 453EB - CRYOGENIC GATE VALVES ASME CLASS 900 7 POSITION INDICATOR
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
7 LIMIT SWITCHES
L RF/BW 368 381 457 610 737 838 965 1029 1130 1219 1321 1549
L RTJ 371 384 460 613 740 841 968 1038 1140 1232 1334 1568 7 LOCKING / INTERLOCK SYSTEM
D 216 241 292 381 470 546 610 641 705 787 857 1041
7 PTFE SOFT SEATS
V 250 300 400 600 650 700 900 1000 G.O. G.O. G.O. G.O.
W 200 300 300 300 300 300 300 300 300 300 300 300 7 STEM PROTECTION
H 650 900 970 1190 1414 1555 1739 1885 1939 2135 2270 2530
7 STEM EXTENSION
H1 700 980 1070 1350 1620 1820 2050 2250 2350 2600 2800 3150
7 LANTERN RING
FIG. N. 454EB - CRYOGENIC GATE VALVES ASME CLASS 1500 7 EXTENDED STUFFING BOX
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L RF/BW 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943
7 LIVE LOADED PACKING
L RTJ 371 473 549 711 842 1000 1146 1276 1407 1559 1686 1972 7 DRAIN PLUG
D 216 267 311 394 483 584 673 749 826 914 984 1168
7 BY PASS
V 250 400 500 600 700 900 1600 1600 G.O. G.O. G.O. G.O.
W 200 300 300 300 300 300 300 300 300 300 300 300 7 BW ENDS
H 650 920 1060 1230 1448 1555 1739 1885 1939 2135 2270 2530
7 DIN CONNECTIONS
H1 700 1000 1170 1390 1660 1820 2050 2250 2350 2600 2800 3150
11
VALVOSIDER GATE VALVES BELLOW SEAL
standard features
V ? Description BELLOW SEAL
BOLTED BONNET
12
10 RISING STEM
20
9 NON RISING HANDWHEEL
24 RENEWABLE SEATS
16
8
7
15
17
19 H1 - OPEN ? Design API 600
2 BS 1414
6
18
H
14 ? Face to face ASME B16.10

13
23
22 ? Flanges ASME B16.5
21
BW TO ANSI B16.25
? Testing API 598

API 6D
13 BS 6755
14
18
5 ? Rating ASME B16.34
D
4
3
1 ? Marking MSS-SP 25
CE - PED
L
16" 12" 8" 6" 6"
? Certificates EN 10204 – 3.1 B
SIZE (inches)
ASME CLASS 150 300 600 900 1500
PART NAM E W 45xSO L45xSO M 45xSO C45xSO B45xSO E45xSO D45xSO F45xSO H45xSO
1 Body W CB LCB W C6 C5 C12 CF8 CF8C CF8M CF3M
2 Bonnet W CB LCB W C6 C5 C12 CF8 CF8C CF8M CF3M
3 Seat ring surface F6A (1) F6A (1) F6A (1) F6A (1) F6A (1) F304 (1) F321 (1) F316 (1) F316L (1)
4 W edge seat surfaces F6A (2) F6A (2) F6A (2) F6A (2) F6A (2) F304 (2) F321 (2) F316 (2) F316L (2)
5 Stem F6A (3) F6A (3) F6A (3) F6A (3) F6A (3) F304 (3) F321 (3) F316 (3) F316L (3)
6 Back seat F6A (3) F6A (3) F6A (3) F6A (3) F6A (3) F304 (3) F321 (3) F316 (3) F316L (3)
7 G land F6A (3) F6A (3) F6A (3) F6A (3) F6A (3) F304 (3) F321 (3) F316 (3) F316L (3)
8 G land flange A105 F316 F316 F316 F316 F316 F316 F316 F316L
9 Y oke sleeve B148 9A (4) B148 9A (4) Nod.Iron Nod.Iron Nod.Iron B148 9A (4) B148 9A (4) B148 9A (4) B148 9A (4)
10 Y oke nut A105 A105 A105 A105 A105 F316 F316 F316 F316L
11 Handwheel Steel
13 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
14 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
16 Nuts 2H 2H 2H 2H 2H G8 G8 G8 G8
18 G asket S.S. reinforced graphite (5)
20 G rease nipple A105
21 Bellow A182 F321
22 Extension A105 LF2 F11 F5 F9 F304L F347 F316L F316L
23 Bellow flange A182 F321
24 No rot. Device F6A F6A F6A F6A F6A F304 F321 F316 F316L
12
GATE VALVES BELLOW SEAL VALVOSIDER
FIG. N. 450SO - BELLOW GATE VALVES OVAL BODY ASME CLASS 150
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” ---
L RF 178 191 203 229 254 267 292 330 356 381 406 432 457 508 ---
L BW 216 241 282 305 381 403 419 457 502 571 610 660 711 813 ---
D 152 178 191 229 254 279 343 406 483 533 597 635 699 813 ---
V 200 200 225 250 250 300 400 500 500 600 600 700 700 800 ---
H 610 675 820 940 1160 1530 1960 2350 2600 2980 3170 3550 4050 4650 ---
H1 660 740 900 1040 1290 1680 2160 2600 2900 3350 3570 4000 4550 5250 ---
FIG. N. 451SO - BELLOW GATE VALVES ASME CLASS 300

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” ---
L RF/BW 216 241 282 305 381 403 419 457 502 762 838 914 991 1143 ---
L RTJ 232 257 298 321 397 419 435 473 518 778 854 930 1010 1165 ---
D 165 191 210 254 279 318 381 445 521 584 648 711 775 914 ---
V 200 200 225 250 300 400 500 500 600 600 700 700 800 900 ---
H 600 685 765 920 1070 1315 1700 2035 2395 2760 3135 3600 4080 4795 ---
H1 650 750 840 1020 1200 1465 1900 2285 2700 3110 4535 4050 4580 5350 ---

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” --- --- ---
L RF/BW 292 356 432 559 660 787 838 889 991 1092 1194 1397 --- --- ---
L RTJ 295 359 435 562 663 791 841 892 994 1095 1200 1407 --- --- ---
D 165 210 273 356 419 508 559 603 686 743 813 940 --- --- ---
V 200 250 400 500 600 700 900 800 900 1000 1600 G.O. --- --- ---
H 640 805 905 1360 1720 2120 2500 --- --- --- --- --- --- --- ---
H1 690 880 1010 1510 1920 2370 2800 --- --- --- --- --- --- --- ---
FIG. N. 453SO - BELLOW GATE VALVES ASME CLASS 900 features on request
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 7 TOP FLANGE TO ISO 5210
L RF/BW 368 381 457 610 737 838 965 1029 1130 7 GEAR OPERATOR
L RTJ 371 384 460 613 740 841 968 1038 1140
D 216 241 292 381 470 546 610 641 705
V 250 300 400 600 650 700 900 1000 G.O. 7 PNEUMATIC ACTUATOR
H --- --- --- --- --- --- --- --- --- 7 HYDRAULIC ACTUATOR
H1 --- --- --- --- --- --- --- --- --- 7 ELECTRIC ACTUATOR
7 POSITION INDICATOR
7 LIMIT SWITCHES
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16”
L RF/BW 368 470 546 705 832 991 1130 1257 1384 7 LOCKING / INTERLOCK SYSTEM
L RTJ 371 473 549 711 842 1000 1146 1276 1407 7 PTFE SOFT SEATS
D 216 267 311 394 483 584 673 749 826
7 STEM PROTECTION
V 250 400 500 600 700 900 1600 1600 1600
H --- --- --- --- --- --- --- --- --- 7 STEM EXTENSION
H1 --- --- --- --- --- --- --- --- --- 7 LANTERN RING
7 EXTENDED STUFFING BOX
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
13
VALVOSIDER PRESSURE SEAL GATE VALVES
MANUFACTURER OF VALVES ASME 600 - 900 - 1500 - 2500
standard features
V
12 7 Description ROUND BODY
11 PRESSURE SEAL BONNET
10 RISING STEM
21 INTEGRAL BACKSEAT
WELDED IN SEATS
13
FLEXIBLE WEDGE
14
8 7 Design API 600 STYLE A
H1 - OPEN
7 ASME B16.34
19 API 600 STYLE B on demand
25 H
15 7 Face to face ASME B16.10
23
22 7 Ends ASME B16.5
2 BW ENDS TO ASME B16.25
24
16
7 Testing API 598
API 6D
17
BS 6755
18
6 7 Rating ASME B16.34
5
4 7 Marking MSS-SP 25
3 CE - PED
1 L
STARTING FROM THE FOLLOWING SIZES/CLASSES 7 Certificates EN 10204 - 3.1 B
SIZE (inches) 8" 6" 6" 4"
ASME CLASS 600 900 1500 2500
PART NAME WP5x IP5x MP5x WCP5x FP5x

1 Body W CB W C1 W C6 W C9 CF8M
2 Bonnet W CB W C1 W C6 W C9 CF8M
3 Seat - ring A105 + HF (1) F6A + HF (1) F6A + HF (1) F6A + HF (1) F316 + HF (1)
4 Wedge seat surfaces W CB + HF (1) W C1 + HF (1) W C6 + HF (1) W C9 + HF (1) CF8M + HF (1)
5 Stem F6A (3) F6A (3) F6A (3) F6A (3) F316 (3)
6 Back seat (integral) Stellite (2)
7 Gland F6A (3) F6A (3) F6A (3) F6A (3) F316 (3)
9 Yoke sleeve B148 9A (4)
10 Yoke nut A 105 A 105 A 105 A 105 F316
11 Handwheel Steel
13 Bolts B7 B16 B16 B16 B8
14 Nuts 2H G4 G4 G4 G8
15 Retainer flange A 105 A 105 A 105 A 105 F316
16 Segmented retainer ring F6A F6A F6A F6A F316
17 Spacer ring F6A F6A F6A F6A F316
18 Gasket S.S. Reinforced Graphite (5)
19 Packing Graphite rings & wiper rings
20 Grease nipple Steel
21 Yoke W CB W C1 W C6 W C9 CF8M
22 Segmented support ring F6 F6 F6 F6 F316
23 Yoke / body bolt B7 B16 B16 B16 B8
24 Yoke / body nut 2H G4 G4 G4 G8
25 Bolts B7 B16 B16 B16 B8
(2) On request: faced with Monel - Hastelloy - other materials (5) On request: Metal
(3) On request: 17 Cr - Monel - Hastelloy - other materials
14
PRESSURE SEAL GATE VALVES VALVOSIDER
ASME 600 - 900 - 1500 - 2500 MANUFACTURER OF VALVES
FIG. N. P52 - PRESSURE SEAL GATE VALVES ASME CLASS 600

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L RF 292 356 432 559 660 787 838 889 991 1092 1194 1397
L RTJ 295 359 435 562 663 791 841 892 994 1095 1200 1407
L BW 178 254 305 457 584 711 813 889 991 1092 1194 1397
V 200 250 400 500 600 700 G.O. G.O. G.O. G.O. G.O. G.O.
H 500 550 590 840 970 1160 1300 1500 1780 2000 2150 2400
H1 550 630 690 990 1170 1410 1600 1850 2180 2450 2650 3000

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L RF 368 381 457 610 737 838 965 1029 1130 1219 1321 1549
L RTJ 371 384 460 613 740 841 968 1038 1140 1232 1334 1568
L BW 216 305 356 508 660 787 914 991 1092 1143 1245 1397
V 250 300 400 500 G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O.
H 500 550 590 840 970 1250 1350 1580 1900 2050 2200 2500
H1 550 620 690 990 1170 1500 1650 1930 2300 2600 2700 3100

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L RF 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943
L RTJ 371 473 549 711 842 1000 1146 1276 1407 1559 1686 1972
L BW 216 305 406 559 711 864 991 1067 1194 1346 1473 1943
V 250 400 600 G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O.
H 500 550 590 840 970 1250 1350 1780 2000 2200 2400 2600
H1 550 630 690 990 1170 1500 1700 2130 2400 2650 2900 3200

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
L RF 451 578 673 914 1022 1270 1422 - - - - -
L RTJ 454 584 683 927 1038 1292 1445 - - - - -
L BW 279 368 457 610 762 914 1041 1118 1245 1397 1524 1676
V 300 500 700 G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O.
H 500 550 600 860 1000 1330 1480 1860 2090 2350 2650 2800
H1 550 630 690 1010 1200 1580 1780 2210 2490 2800 3150 3400
features on request
7 TOP FLANGE TO ISO 5210 7 TWO PIECE BODY GUIDED WEDGE
7 GEAR OPERATOR 7 STEM PROTECTION
7 CHAIN WHEEL OPERATOR 7 STEM EXTENSION
7 PNEUMATIC OR HYDRAULIC ACTUATOR 7 LANTERN RING
7 ELECTRIC ACTUATOR 7 EXTENDED STUFFING BOX
7 POSITION INDICATOR 7 LIVE LOADED PACKING
7 LIMIT SWITCHES 7 DRAIN PLUG
7 LOCKING / INTERLOCK SYSTEM 7 BY PASS
7 PTFE SOFT SEATS 7 FLANGED ENDS
7 PARALLEL WEDGE 7 DIN CONNECTIONS
15
VALVOSIDER GATE VALVES - THROUGH CONDUIT
standard features
22
12 7 Description ROUND OR FLAT BODY
11 BOLTED BONNET
V OUTSIDE SCREW AND YOKE
9 RISING STEM
20 RENEWABLE SOFT SEATS
PARALLEL SLAB GATE
22
15 7 Design API 6 D
16 ASME B16.34
8 ASME B31.3
7 B 7 Face to face API 6D
6
17 7 Flanges ASME B16.5 FROM 2” TO 24”
ASME B16.47 FROM á 26”
19
BW ENDS TO ASME B16.25
2
18 7 Testing API 598
14 API 6D
DN
BS 6755
13
3
7 Marking API 6D
4 MSS-SP 25
1 CE - PED
L
21 THE USE OF GEAR OPERATOR IS RECOMMENDED
SIZE (inches) 16" 12" 8" 6" 6"
7 Certificates EN 10204 - 3.1 B
ASME CLASS 150 300 600 900 1500
seat detail
PART NAME WT5x LCT5x
1 Body A216 W CB A352 LCC
2 Bonnet A216 W CB A352 LCC
3 Seat ring surface A105 (1) A350 LF2 (1)
4 Gate seat surfaces A516 Gr70(2) A537 CL1 (2)
5 Stem AISI 410 (3) AISI 410 (3) GATE
6 Stuffing box A105 (3) A350 LF2 (3) EMERGENCY
SEALANT
7 Gland A105 (3) A350 LF2 (3) INJECTION SEAT
RING
8 Gland flange A105 A350 LF2
9 Yoke sleeve B148 9A (4) B148 9A (4)
10 Yoke nut A105 A105
13 Bolts B7 L7
14 Nuts 2H G4
SPRING
15 Eye bolts B7 L7
16 Nuts 2H G4 SEALING GUIDE
17 O rings BUNA BUNA / VITON RINGS
18 Gasket BUNA (5) BUNA / VITON (5)
VALVE SEAT INSERT
19 Packing VITON (6) VITON (6)
BODY
20 Grease nipple A105 A105
21 Plug A105 A350 LF2
22 Stem protection A105 A105
16
GATE VALVES - THROUGH CONDUIT VALVOSIDER
FIG. N. T50 - THROUGH CONDUIT GATE VALVES OVAL BODY ASME CLASS 150
SIZE 3" 4” 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 26” 28” 30” 32” 34” 36” 40” 42” 48”
L RF 203 229 267 292 330 356 381 406 432 457 508 508 559 610 650 711 762 800 914 -- --
L BW 282 305 403 419 457 502 572 610 660 711 762 813 864 914 914 965 1016 1016 1118 -- --
DN 76 102 152 203 254 305 337 387 439 489 540 591 635 686 737 782 831 876 927 -- --
V 300 300 300 450 600 600 600 600 600 800 G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O. -- --
A 215 270 345 433 520 584 630 722 785 860 974 1050 1160 1210 1295 1360 1480 1540 1700 -- --
B 505 530 665 820 975 1100 1190 1345 1480 1610 1800 1880 2110 2190 2330 2530 2660 2800 3160 -- --
FIG. N. T51 - THROUGH CONDUIT GATE VALVES ASME CLASS 300

SIZE 3" 4” 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 26” 28” 30” 32” 34” 36” 40” 42” 48”
L RF/BW 282 305 403 419 457 502 762 838 914 991 1092 1143 1245 1346 1397 1524 1626 1727 1930 -- --
L RTJ 298 321 419 435 473 518 778 854 930 1010 1114 1165 1270 1372 1422 1552 1654 1755 -- -- --
DN 76 102 152 203 254 305 337 389 439 489 540 591 635 686 737 782 831 876 978 -- --
A 260 299 355 430 507 580 661 747 817 897 982 1037 1142 1252 1335 1395 1490 1570 1700 -- --
B 490 533 655 920 980 1110 1200 1360 1480 1650 1810 1930 2160 2230 2400 2570 2710 2820 3200 -- --
FIG. N. T52 - THROUGH CONDUIT GATE VALVES ASME CLASS 600

SIZE 3" 4” 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 26” 28” 30” 32” 34” 36” 40” 42” 48”
L RF/BW 356 432 559 660 787 838 889 991 1092 1194 1295 1397 1448 1549 1651 1778 1930 2083 2286 -- --
L RTJ 359 435 562 663 791 841 892 994 1095 1200 1305 1407 1461 1562 1664 1794 1946 2099 -- -- --
DN 76 102 152 203 254 305 337 389 439 489 540 591 635 686 737 782 831 876 978 -- --
A 212 307 405 435 510 590 630 725 810 930 995 1085 1170 1280 1350 1400 1490 1580 1710 -- --
B 485 530 690 860 980 1160 1200 1375 1500 1700 1900 2100 2200 2300 2400 2650 2750 2900 3200 -- --
FIG. N. T53 - THROUGH CONDUIT GATE VALVES ASME CLASS 900 features on request
SIZE 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 26” 7 TOP FLANGE TO ISO 5210
L RF/BW 381 457 610 737 838 965 1029 1130 1219 1321 -- 1549 -- 7 GEAR OPERATOR
L RTJ 384 460 613 740 841 968 1038 1140 1232 1334 -- 1568 -- 7 CHAIN WHEEL OPERATOR
DN 76 102 152 203 254 305 337 389 439 489 540 591 -- 7 PNEUMATIC ACTUATOR
V 300 300 300 300 600 600 G.O. G.O. G.O. G.O. G.O. G.O. --
7 HYDRAULIC ACTUATOR
A 207 252 337 422 514 590 637 727 917 987 -- 1212 --
B 515 541 660 850 998 1200 1300 1400 1600 1800 -- 2100 -- 7 ELECTRIC ACTUATOR
FIG. N. T54 - THROUGH CONDUIT GATE VALVES ASME CLASS 1500 7 LIMIT SWITCHES
SIZE 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 22” 24” 26” 7 LOCKING / INTERLOCK SYSTEM
L RF/BW 470 546 705 832 991 1130 1257 1384 1537 1664 -- 1943 -- 7 PTFE SOFT SEATS
L RTJ 500 549 711 841 1000 1146 1276 1407 1559 1686 -- 1972 --
7 STEM PROTECTION
DN 76 102 152 203 254 305 337 389 439 489 540 591 --
V 300 300 300 300 600 600 G.O. G.O. G.O. G.O. G.O. G.O. -- 7 STEM EXTENSION
A 254 271 357 437 520 532 661 747 817 897 -- 1037 -- 7 SECONDARY SEAL
B 588 661 715 860 1010 1200 1400 1500 1600 1800 -- 2200 -- 7 LANTERN RING
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
17
VALVOSIDER
MANUFACTURER OF VALVES ASME GLOBE VALVES
DESCRIPTION OF A TYPICAL GLOBE VALVE
HANDWHEEL NUT
WASHER
HANDWHEEL
YOKE SLEEVE
STEM
EYE BOLT
NUT
GLAND FLANGE
GLAND
EYE BOLT PIN
STEM PACKING
BONNET NUT
BONNET
BONNET BOLT
BONNET GASKET
BACKSEAT BUSHING
DISC NUT
SEAT RING
DISC
BODY
18
VALVOSIDER
MANUFACTURER OF VALVES ASME GLOBE VALVES 3
TYPE CLASS SIZES FIG. N. TYPE CLASS SIZES FIG. N.
GLOBE VALVES 150 2” - 16” 460Y GLOBE VALVES 150 2” - 16” 460
‘ Y ‘ TYPE BOLTED BONNET
300 2” - 16” 461Y 300 2” - 16” 461
600 2” - 16” 462Y 600 2” - 16” 462
900 2” - 12” 463Y 900 2” - 12” 463
1500 2” - 12” 464Y 1500 2” - 12” 464
page 22 page 20
GLOBE VALVES 150 2” - 16” 460A GLOBE VALVES 150 2” - 16” 460EB
ANGLE 90° CRYOGENIC
300 2” - 16” 461A 300 2” - 16” 461EB
600 2” - 16” 462A 600 2” - 16” 462EB
900 2” - 12” 463A 900 2” - 12” 463EB
1500 2” - 12” 464A 1500 2” - 12” 464EB
page 24 page 26
GLOBE VALVES 150 2” - 16” 460YSO GLOBE VALVES 150 2” - 16” 460SO
BELLOW SEAL BELLOW SEAL
‘ Y ‘ TYPE 300 2” - 16” 461YSO 300 2” - 16” 461SO
600 2” - 16” 462YSO 600 2” - 16” 462SO
900 2” - 12” 463YSO 900 2” - 12” 463SO
1500 2” - 12” 464YSO 1500 2” - 12” 464SO

page 30 page 28
GLOBE VALVES 600 2” - 16” P82 GLOBE VALVES 600 2” - 16” P62
PRESSURE SEAL PRESSURE SEAL
‘ Y ‘ TYPE 900 2” - 16” P83 900 2” - 16” P63
1500 2” - 12” P84 1500 2” - 12” P64
2500 2” - 12” P85 2500 2” - 12” P65
page 34 page 32
19
VALVOSIDER GLOBE VALVES
standard features
V
13 ? Description BOLTED BONNET
12
RISING STEM
11
RISING HANDWHEEL
9
aaa
SWIVEL PLUG DISC
5 aaa
aaa
aaa
aaa
aaa
aaa
aaa
aaa RENEWABLE SEATS
16
17 ? Design BS 1873
8 ASME B16.34
H1 - OPEN
7 WALL THICKNESS TO API 600
H
18
15
? Flanges ASME B16.5
2
14
19
? Testing API 598
6
API 6D
D
10 BS 6755
4
1
L ? Marking MSS-SP 25
Maximum pressure under the disc CE - PED
DN 3" 4" 5" 6" 8" 10" 12" 14" 16"
Δ p bar 85 60 35 21 14 9 6 5 4 ? Certificates EN 10204 – 3.1 B
If higher, valve to be mounted with gear operator or with pressure
above the disc and fitted with external or internal bypass.
PART NAM E W46x L46x M 46x C46x B46x E46x D46x F46x H46x
4 Disc seat surface F6A (2) F6A (2) F6A (2) F6A (2) F6A (2) F304 (2) F321 (2) F316 (2) F316L (2)
6 Back seat F6A F6A F6A F6A F6A F304 F321 F316 F316L
7 Gland F6A F6A F6A F6A F6A F304 F321 F316 F316L
8 Gland flange A105 F316 F316 F316 F316 F316 F316 F316 F316L
9 Yoke sleeve B148 9A (4) B148 9A (4) Nod.Iron Nod.Iron Nod.Iron B148 9A (4) B148 9A (4) B148 9A (4) B148 9A (4)
10 Disc nut F6A F6A F6A F6A F6A F304 F321 F316 F316L
11 Handwheel Steel
12 Plate A105
14 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
15 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
17 Nuts 2H 2H 2H 2H 2H G8 G8 G8 G8
19 Gasket S.S spiral wound reinf. graphite / RTJ (5)
20
GLOBE VALVES VALVOSIDER
FIG. N. 460 - GLOBE VALVES ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 -- -- -- --
L RTJ 216 219 254 305 368 419 508 635 711 800 927 -- -- -- --
D 152 178 191 229 254 279 343 406 483 533 597
V 200 200 225 250 300 300 500 * 700 * 700 * 800 * 1000 * -- -- -- --
H 320 350 380 430 480 560 680 750 860 910 1240 -- -- -- --
H1 335 370 404 460 518 605 740 825 950 1025 1375 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 -- -- -- --
L RTJ 282 308 333 371 416 460 575 638 727 854 879 -- -- -- --
D 165 191 210 254 279 318 381 445 521 584 648 -- -- -- --
V * * * * * * -- -- -- --
H 390 400 410 440 570 680 800 850 1010 1150 1380 -- -- -- --
H1 405 420 434 470 608 725 860 925 1100 1255 1515 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 -- -- -- --
L RTJ 295 333 359 435 511 562 663 790 841 892 994 -- -- -- --
D 165 191 210 273 330 356 419 508 559 603 686 -- -- -- --
V 4 * * 7 * 1000 * 1000* 1000 * 1000 * * -- -- -- --
H 350 515 545 600 686 780 840 1235 1311 1430 1670 -- -- -- --
H1 365 535 569 630 724 825 900 1310 1401 1552 1805 -- -- -- --
FIG. N. 463 - GLOBE VALVES ASME CLASS 900 features on request

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 7 TOP FLANGE TO ISO 5210
L RTJ 371 422 384 460 562 613 740 842 968 7 CHAIN WHEEL OPERATOR
D 216 244 241 292 349 381 470 546 610
V 400 400 500* 600* 700* 1000
700* 1000
900* 1000* 1000*
H 575 690 590 720 870 973 1140 1500 1680 7 HYDRAULIC ACTUATOR
H1 590 710 614 750 908 1018 1200 1575 1770 7 ELECTRIC ACTUATOR
FIG. N. 464 - GLOBE VALVES ASME CLASS 1500 7 LIMIT SWITCHES
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 7 LOCKING / INTERLOCK SYSTEM
L RF/BW 368 419 470 546 673 705 832 991 1130 7 DISC WITH PTFE INSERT
L RTJ 371 422 473 549 676 711 842 1000 1146 7 PARABOLIC DISC
D 216 244 267 311 375 394 483 584 673
7 STOP CHECK DISC
V 400* 400* 500* 700* 700* 900* 1000* 1000* 1000*
H 575 690 770 840 902 973 1043 1670 1750 7 STEM PROTECTION
H1 590 710 794 870 940 1018 1103 1745 1860 7 STEM EXTENSION
* Gear operator recommended 7 LANTERN RING
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
21
GLOBE VALVES - ‘Y’ TYPE
VALVOSIDER
standard features
? Description BOLTED BONNET
13 V RISING STEM
12 RISING HANDWHEEL
9 SWIVEL PLUG DISC
17 RENEWABLE SEATS
aa
aaa
aa
8 aaa
aaa
aaa
aa
aaa
aa
? Design BS 1873
H1 - OPEN
16
18 ASME B16.34
H
20
? Face to face ASME B16.10
2
14
15
19
6 ? Testing
D
API 598
5
API 6D
10 BS 6755
4
3 L ? Rating ASME B16.34
1
? Marking MSS-SP 25
DN 3" 4" 5" 6" 8" 10" 12" 14" 16"
Δ p bar 85 60 35 21 14 9 6 5 4
PART NAM E W46xY L46xY M 46xY C46xY B46xY E46xY D46xY F46xY H46xY
6 Back seat F6A F6A F6A F6A F6A F304 F321 F316 F316
7 Gland F6A F6A F6A F6A F6A F304 F321 F316 F316
8 Gland flange A105 F316 F316 F316 F316 F316 F316 F316 F316
11 Handwheel Steel
12 Plate A105
13 Handwheel nut A105 B8
14 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
15 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
17 Nuts 2H 2H 2H 2H 2H G8 G8 G8 G8
19 Gasket (5) S.S. spiral wound reinf. graphite / RTJ (5)
20 Packing (6 ) Graphite rings & wiper rings (6)
22
GLOBE VALVES - ’Y’ TYPE
ASME 150 - 300 - 600 - 900 - 1500
VALVOSIDER
FIG. N. 460Y - GLOBE VALVES - 'Y' TYPE ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 -- -- -- --
L RTJ 216 219 254 305 368 419 508 635 711 800 927 -- -- -- --
D 152 178 191 229 254 279 343 406 483 533 597 -- -- -- --
V 200 200 225 250 300 300 500 * 700 * 700 * 800 * 1000 * -- -- -- --
H 320 350 380 440 480 560 680 750 860 930 1250 -- -- -- --
H1 380 430 470 550 615 720 890 1010 1170 1040 1380 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 -- -- -- --
L RTJ 282 308 333 371 416 460 575 638 727 854 879 -- -- -- --
D 165 191 210 254 279 318 381 445 521 584 648 -- -- -- --
V * * * * * * -- -- -- --
H 390 400 410 430 570 680 800 850 1010 1150 1390 -- -- -- --
H1 410 420 435 520 615 735 860 930 1110 1270 1512 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 -- -- -- --
L RTJ 295 333 359 435 511 562 663 790 841 892 994 -- -- -- --
D 165 191 210 273 330 356 419 508 559 603 686 -- -- -- --
V 4 * * 7 * 1000 * 1000* 1000 * 1000 * * -- -- -- --
H 350 515 545 600 686 780 840 1235 1311 1430 1660 -- -- -- --
H1 370 535 570 630 726 830 910 1315 1411 1550 1800 -- -- -- --
FIG. N. 463Y - GLOBE VALVES - 'Y' TYPE ASME CLASS 900 features on request
D 216 244 241 292 349 381 470 546 610
V 400 400 500* 600* 700* 1000* 1000* 1000* 1000*
H 575 690 590 720 870 973 1140 1500 1680 7 HYDRAULIC ACTUATOR
H1 605 730 634 780 928 1045 1230 1615 1810 7 ELECTRIC ACTUATOR
FIG. N. 464Y - GLOBE VALVES - 'Y' TYPE ASME CLASS 1500 7 LIMIT SWITCHES
D 216 244 267 311 375 394 483 584 673
7 STOP CHECK DISC
V 400* 400* 500* 700* 700* 900* 1000* 1000* 1000*
H1 615 740 826 915 980 1080 1190 1760 1855 7 STEM EXTENSION
* Gear operator recommended 7 LANTERN RING
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
23
GLOBE VALVES - ANGLE TYPE
VALVOSIDER
standard features
V ? Description BOLTED BONNET
13 RISING STEM
12
aa
aa
aa
aa
aa
aa
aa
RISING HANDWHEEL
11 SWIVEL PLUG DISC
9 RENEWABLE SEATS
17
H1 - OPEN
8
? Design BS 1873
16
H
7 ASME B16.34
2
14
15
D
5
10 ? Testing API 598
3 API 6D
L
4
1 BS 6755
? Rating ASME B16.34

D
L
? Marking MSS-SP 25
DN 3" 4" 5" 6" 8" 10" 12" 14" 16"
Δ p bar 85 60 35 21 14 9 6 5 4
PART NAM E W46xA L46xA M 46xA C46xA B46xA E46xA D46xA F46xA H46xA
7 Gland F6A F6A F6A F6A F6A F304 F321 F316 F316L
8 Gland flange A105 F316 F316 F316 F316 F316 F316 F316 F316L
11 Handwheel Steel
12 Plate A105
14 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
15 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
17 Nuts 2H 2H 2H 2H 2H G8 G8 G8 G8
19 Gasket S.S. spiral wound reinf. graphite / RTJ (5)
24
GLOBE VALVES - ANGLE TYPE
ASME 150 - 300 - 600 - 900 - 1500
VALVOSIDER
FIG. N. 460A - GLOBE VALVES - ANGLE TYPE ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 102 108 121 146 178 203 248 311 349 394 457 -- -- -- --
L RTJ 114 121 133 159 191 216 260 324 362 406 470 -- -- -- --
D 152 178 191 229 254 279 343 406 483 533 597 -- -- -- --
V 200 200 225 250 300 300 500 * 700 * 700 * 800 * 1000 * -- -- -- --
H 384 420 456 516 576 672 816 900 1032 1092 1488 -- -- -- --
H1 399 440 480 546 614 717 876 975 1122 1197 1608 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 133 146 159 178 200 222 279 311 356 (419) (432) -- -- -- --
L RTJ 149 162 174 194 216 238 287 327 371 (427) (440) -- -- -- --
D 165 191 210 254 279 318 381 445 521 584 648 -- -- -- --
V * * * * * * -- -- -- --
H 468 480 492 528 684 816 960 1020 1212 1380 1656 -- -- -- --
H1 483 500 516 558 722 861 1020 1095 1302 1485 1776 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 146 165 178 216 254 279 330 394 419 (444) (496) -- -- -- --
L RTJ 149 168 181 219 257 282 333 397 422 (496) (497) -- -- -- --
D 165 191 210 273 330 356 419 508 559 603 686 -- -- -- --
V 4 * * 7 * 1000 * 1000* 1000 * 1000 * * -- -- -- --
H 420 618 654 720 823 936 1008 1482 1573 1716 2004 -- -- -- --
H1 435 638 678 750 861 981 1068 1557 1663 1821 2124 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” features on request
L RF/BW 184 210 191 229 279 305 368 419 483 7 TOP FLANGE TO ISO 5210
L RTJ 187 213 194 232 282 308 371 422 486 7 GEAR OPERATOR
D 216 244 241 292 349 381 470 546 610 7 CHAIN WHEEL OPERATOR
V 400 400 500* 600* 700* 1000* 1000* 1000* 1000* 7 PNEUMATIC ACTUATOR
H 690 828 708 864 1044 1168 1368 1800 2016
H1 705 848 732 894 1082 1213 1428 1875 2106
7 ELECTRIC ACTUATOR
FIG. N. 464A - GLOBE VALVES - ANGLE TYPE ASME CLASS 1500 7 LIMIT SWITCHES
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12”
L RF/BW 216 254 305 406 483 559 711 864 991 7 LOCKING / INTERLOCK SYSTEM
L RTJ 219 257 308 409 486 565 721 873 1006 7 DISC WITH PTFE INSERT
D 216 244 267 311 375 394 483 584 673 7 PARABOLIC DISC
V 400* 400* 500* 700* 700* 900* 1000* 1000* 1000* 7 STOP CHECK DISC
H1 705 848 948 1038 1120 1213 1312 2079 2190 7 STEM EXTENSION
Gear operator recommended
* 7 LANTERN RING
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
25
VALVOSIDER CRYOGENIC GLOBE VALVES
ASME 150 - 300 - 600 - 900 - 1500
V
standard features
11 EXTENDED BONNET
aa
aa
aa
9
aa
aa
RISING STEM
17 RISING HANDWHEEL
8
SWIVEL PLUG DISC
RENEWABLE SEATS
16
H1 - OPEN
7 ? Design BS 1873
18 ASME B16.34
H
20
W

21
? Ends ASME B16.5
5
15
14 ? Testing API 598
19 API 6D
10 BS 6755
D
4
3
L
1
Maximum pressure under the disc
? Marking MSS-SP 25
DN 3" 4" 5" 6" 8" 10" 12" 14" 16" CE - PED
Δ p bar 85 60 35 21 14 9 6 5 4
If higher, valve to be mounted with gear operator or with pressure ? Certificates EN 10204 – 3.1 B
PART NAME E46xEB F46xEB

options
1 Body CF8 CF8M
2 Bonnet CF8 CF8M
3 Seat ring surface F316 (1) F316 (1)
4 Disc seat surface F316 (2) F316 (2)
5 Stem F316 (3) F316 (3)
6 Back seat (integral) CF8 CF8M
7 Gland F316 F316
8 Gland flange F316 F316
9 Yoke sleeve B148 9A (4) B148 9A (4)
10 Disc nut F316 F316
12 Plate A105 A105
14 Bolts B8 B8
15 Nuts G8 G8
16 Eye bolts B8 B8
17 Nuts G8 G8
18 Eye bolt pin B8 B8
20 Packing PTFE (6) PTFE (6) FULLY EXTRACTABLE COLD BOX
21 Extension F316L F316L
26
GLOBE VALVES - CRYOGENIC
ASME 150 - 300 - 600 - 900 - 1500
VALVOSIDER
FIG. N. 460EB - CRYOGENIC GLOBE VALVES ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 -- -- -- --
L RTJ 216 219 254 305 368 419 508 635 711 800 927 -- -- -- --
D 152 178 191 229 254 279 343 406 483 533 597 -- -- -- --
V 200 200 225 250 300 300 500 * 700 * 700 * 800 * 1000 * -- -- -- --
W 200 200 300 300 300 300 300 300 300 300 300 -- -- -- --
H 520 550 680 740 780 860 980 1050 1160 1240 1320 -- -- -- --
H1 535 570 704 770 818 905 1040 1125 1250 1360 1490 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 -- -- -- --
L RTJ 282 308 333 371 416 460 575 638 727 854 879 -- -- -- --
D 165 191 210 254 279 318 381 445 521 584 648 -- -- -- --
V * * * * * * -- -- -- --
W 200 200 300 300 300 300 300 300 300 300 300 -- -- -- --
H 590 600 710 730 870 980 1100 1150 1310 1450 1530 -- -- -- --
H1 605 620 734 760 908 1025 1160 1225 1400 1555 1660 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 -- -- -- --
L RTJ 295 333 359 435 511 562 663 790 841 892 994 -- -- -- --
D 165 191 210 273 330 356 419 508 559 603 686 -- -- -- --
V 4 * * 7 * 1000 * 1000* 1000 * 1000 * * -- -- -- --
W 200 200 300 300 300 300 300 300 300 300 300 -- -- -- --
H 550 715 845 900 986 1080 1140 1535 1611 1700 1820 -- -- -- --
H1 565 735 869 930 1024 1125 1200 1610 1701 1800 1930 -- -- -- --
FIG. N. 463EB - CRYOGENIC GLOBE VALVES ASME CLASS 900 features on request
L RF/BW 368 419 381 457 559 610 737 838 965
7 GEAR OPERATOR
L RTJ 371 422 384 460 562 613 740 842 968
D 216 244 241 292 349 381 470 546 610
V 400 400 500* 600* 700* 1000* 1000* 1000* 1000*
W 200 200 300 300 300 300 300 300 300
H 775 890 890 1020 1170 1273 1440 1800 1980 7 ELECTRIC ACTUATOR
H1 790 910 914 1050 1208 1318 1500 1875 2070 7 POSITION INDICATOR
7 LIMIT SWITCHES
7 LOCKING / INTERLOCK SYSTEM
FIG. N. 464EB - CRYOGENIC GLOBE VALVES ASME CLASS 1500 7 DISC WITH PTFE INSERT
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12”
7 PARABOLIC DISC
L RF/BW 368 419 470 546 673 705 832 991 1130
7 STOP CHECK DISC
L RTJ 371 422 473 549 676 711 842 1000 1146
D 216 244 267 311 375 394 483 584 673 7 STEM PROTECTION
V 400* 400* 500* 700* 700* 900* 1000* 1000* 1000* 7 STEM EXTENSION
W 200 200 300 300 300 300 300 300 300 7 LANTERN RING
H 775 890 1070 1140 1202 1273 1343 1970 2050 7 EXTENDED STUFFING BOX
H1 790 910 1094 1170 1240 1318 1403 2045 2160 7 LIVE LOADED PACKING
Gear operator recommended 7 DRAIN PLUG
*
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
27
GLOBE VALVES - BELLOW SEAL
VALVOSIDER
standard features
V
10 RISING STEM
23 RENEWABLE SEATS
22
16 ? Design BS 1873
8 ASME B16.34
H1 - OPEN
15
H
20
19
18
? Testing API 598
14
API 6D
13
D
BS 6755
5
21
4
3
1
CE - PED
DN 3" 4" 5" 6" 8" 10" 12" 14" 16"
PAR T NAM E W 46xS O L46xS O M 46xS O C 46xS O B46xS O E 46xS O D46xS O F46xS O H46xS O
1 Body W CB LC B W C6 C5 C 12 CF8 C F8C C F8M C F3M
2 Bonnet W CB LC B W C6 C5 C 12 CF8 C F8C C F8M C F3M
3 S e a t rin g s u rfa c e F 6 A (1 ) F6A (1 ) F 6 A (1 ) F6A (1 ) F6A (1 ) F304 (1 ) F 3 2 1 (1 ) F 3 1 6 (1 ) F316L (1 )
4 D is c s e a t s u rfa c e F6A (2 ) F6A (2 ) F6A (2 ) F6A (2 ) F6A (2 ) F304 (2 ) F321 (2 ) F316 (2 ) F316L (2 )
5 S te m F6A (3 ) F6A (3 ) F6A (3 ) F6A (3 ) F6A (3 ) F304 (3 ) F321 (3 ) F316 (3 ) F316L (3 )
7 G la n d F6A F6A F6A F6A F6A F304 F321 F316 F316L
8 G la n d fla n g e A 105 F316 F316 F316 F316 F316 F316 F316 F316L
9 Y o k e s le e v e B 148 9A (4 ) B 148 9A (4 ) N od .Iron N od .Iron N od .Iron B 148 9A (4 ) B 148 9A (4 ) B 148 9A (4 ) B 148 9A (4 )
10 Y oke nut F6A F6A F6A F6A F6A F304 F321 F316 F316L
11 Handw heel Steel
12 Handw heel nut A105
13 B o lts B7 L7 B 16 B 16 B 16 B8 B8 B8 B8
14 N u ts 2H G4 G4 G4 G4 G8 G8 G8 G8
15 E y e b o lts B7 B7 B8 B8 B8 B8 B8 B8 B8
16 N u ts 2H 2H 2H 2H 2H G8 G8 G8 G8
17 E y e b o lt p in B7 B7 B7 B7 B7 B8 B8 B8 B8
18 B e llo w fla n g e A182 F321
19 G asket S.S. spiral wound reinf. graphite / RTJ (5)
20 P a c k in g Graphite rings & wiper rings (6)
21 B e llo w A182 F321
22 N o ro t. D e v ic e F6A F6A F6A F6A F6A F304 F321 F316 F316L
23 G re a s e n ip p le Steel
28
GLOBE VALVES - BELLOW SEAL
ASME 150 - 300 - 600 - 900 - 1500
VALVOSIDER
FIG. N. 460SO - GLOBE VALVES BELLOW SEAL ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 -- -- -- --
L RTJ 216 219 254 305 368 419 508 635 711 800 927 -- -- -- --
D 152 178 191 229 254 279 343 406 483 533 597 -- -- -- --
V 200 200 225 250 300 300 500 * 700 * 700 * 800 * 1000 * -- -- -- --
H 340 370 400 440 500 580 700 800 900 970 1270 -- -- -- --
H1 355 390 424 470 538 625 760 875 990 1090 1410 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 -- -- -- --
L RTJ 282 308 333 371 416 460 575 638 727 854 879 -- -- -- --
D 165 191 210 254 279 318 381 445 521 584 648 -- -- -- --
V * * * * * * -- -- -- --
H 410 420 430 480 590 700 820 900 1050 1200 1440 -- -- -- --
H1 425 440 454 504 628 745 880 975 1140 1320 1800 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 -- -- -- --
L RTJ 295 333 359 435 511 562 663 790 841 892 994 -- -- -- --
D 165 191 210 273 330 356 419 508 559 603 686 -- -- -- --
V 4 * * 7 * 1000 * 1000* 1000 * 1000 * * -- -- -- --
H 370 525 565 620 700 800 860 1280 1350 1490 1720 -- -- -- --
H1 385 545 589 650 738 845 920 1355 1440 1630 2100 -- -- -- --
FIG. N. 463SO - GLOBE VALVES BELLOW SEAL ASME CLASS 900 features on request
D 216 244 241 292 349 381 470 546 610 7 PNEUMATIC ACTUATOR
V 400 400 500* 600* 700* 1000* 1000* 1000* 1000*
H 590 710 610 750 890 1000 1170 1540 1720
7 ELECTRIC ACTUATOR
H1 605 730 634 780 928 1045 1230 1615 1810
FIG. N. 464SO - GLOBE VALVES BELLOW SEAL ASME CLASS 1500 7 LIMIT SWITCHES
D 216 244 267 311 375 394 483 584 673 7 STOP CHECK DISC
V 400* 400* 500* 700* 700* 900* 1000* 1000* 1000*
7 STEM PROTECTION
H 590 710 790 860 930 1000 1100 1720 1810
7 STEM EXTENSION
H1 605 730 814 890 968 1045 1160 1795 1950
Gear operator recommended 7 LANTERN RING
* 7 EXTENDED STUFFING BOX
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
29
VALVOSIDER GLOBE VALVES - BELLOW SEAL ‘Y’ TYPE
MANUFACTURER OF VALVES ANSI 150 - 300 - 600 - 900 - 1500
standard features
12
10 V OUTSIDE SCREW AND YOKE
9 RISING STEM
22 RENEWABLE SEATS
16
8 ? Design BS 1873
7 ASME B16.34
H1 - OPEN
17
? Face to face
H
2 ASME B16.10
14
18
6 ? Testing API 598
D
20 API 6D
21 BS 6755
5
L
3
CE - PED
DN 3" 4" 5" 6" 8" 10" 12" 14" 16"
PAR T NAM E W 46xY S O L46xY S O M 46xY S O C 46xY S O B46xY S O E 46xY S O D46xY S O F46xY S O H46xY S O
1 Body W CB LC B W C6 C5 C 12 CF8 C F8C C F8M C F3M
2 Bonnet W CB LC B W C6 C5 C 12 CF8 C F8C C F8M C F3M
3 S e a t rin g s u rfa c e F 6 A (1 ) F6A (1 ) F 6 A (1 ) F6A (1 ) F6A (1 ) F304 (1 ) F 3 2 1 (1 ) F 3 1 6 (1 ) F316L (1 )
4 D is c s e a t s u rfa c e F6A (2 ) F6A (2 ) F6A (2 ) F6A (2 ) F6A (2 ) F304 (2 ) F321 (2 ) F316 (2 ) F316L (2 )
5 S te m F6A (3 ) F6A (3 ) F6A (3 ) F6A (3 ) F6A (3 ) F304 (3 ) F321 (3 ) F316 (3 ) F316L (3 )
7 G la n d F6A F6A F6A F6A F6A F304 F321 F316 F316L
8 G la n d fla n g e A 105 F316 F316 F316 F316 F316 F316 F316 F316L
9 Y o k e s le e v e B 148 9A (4 ) B 148 9A (4 ) N od .Iron N od .Iron N od .Iron B 148 9A (4 ) B 148 9A (4 ) B 148 9A (4 ) B 148 9A (4 )
10 Y oke nut F6A F6A F6A F6A F6A F304 F321 F316 F316L
11 Handw heel Steel
12 Handw heel nut A105
13 B o lts B7 L7 B 16 B 16 B 16 B8 B8 B8 B8
14 N u ts 2H G4 G4 G4 G4 G8 G8 G8 G8
15 E y e b o lts B7 B7 B8 B8 B8 B8 B8 B8 B8
16 N u ts 2H 2H 2H 2H 2H G8 G8 G8 G8
17 E y e b o lt p in B7 B7 B7 B7 B7 B8 B8 B8 B8
18 B e llo w fla n g e A182 F321
19 G asket S.S. spiral wound reinf. graphite / RTJ (5)
20 P a c k in g Graphite rings & wiper rings (6)
21 B e llo w A182 F321
22 N o ro t. D e v ic e F6A F6A F6A F6A F6A F304 F321 F316 F316L
23 G re a s e n ip p le Steel
30
GLOBE VALVES - BELLOW SEAL ‘Y’ TYPE
ANSI 150 - 300 - 600 - 900 - 1500
VALVOSIDER
FIG. N. 460YSO - GLOBE V. BELLOW SEAL Y TYPE ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 -- -- -- --
L RTJ 216 219 254 305 368 419 508 635 711 800 927 -- -- -- --
D 152 178 191 229 254 279 343 406 483 533 597 -- -- -- --
V 200 200 225 250 300 300 500 * 700 * 700 * 800 * 1000 * -- -- -- --
H 320 350 380 440 480 560 680 750 860 930 1250 -- -- -- --
H1 380 430 470 550 615 720 890 1010 1170 1040 1380 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 -- -- -- --
L RTJ 282 308 333 371 416 460 575 638 727 854 879 -- -- -- --
D 165 191 210 254 279 318 381 445 521 584 648 -- -- -- --
V * * * * * * -- -- -- --
H 390 400 410 430 570 680 800 850 1010 1150 1390 -- -- -- --
H1 410 420 435 520 615 735 860 930 1110 1270 1512 -- -- -- --

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 -- -- -- --
L RTJ 295 333 359 435 511 562 663 790 841 892 994 -- -- -- --
D 165 191 210 273 330 356 419 508 559 603 686 -- -- -- --
V 4 * * 7 * 1000 * 1000* 1000 * 1000 * * -- -- -- --
H 350 515 545 600 686 780 840 1235 1311 1430 1660 -- -- -- --
H1 370 535 570 630 726 830 910 1315 1411 1550 1800 -- -- -- --
FIG. N. 463YSO - GLOBE V. BELLOW SEAL Y TYPE ASME CLASS 900 features on request
D 216 244 241 292 349 381 470 546 610 7 PNEUMATIC ACTUATOR
V 400 400 500* 600* 700* 1000* 1000* 1000* 1000*
H 575 690 590 720 870 973 1140 1500 1680
7 ELECTRIC ACTUATOR
H1 605 730 634 780 928 1045 1230 1615 1810
FIG. N. 464YSO - GLOBE V. BELLOW SEAL Y TYPE ASME CLASS 1500 7 LIMIT SWITCHES
D 216 244 267 311 375 394 483 584 673 7 STOP CHECK DISC
V 400* 400* 500* 700* 700* 900* 1000* 1000* 1000*
7 STEM PROTECTION
H 575 690 770 840 902 973 1043 1670 1750
7 STEM EXTENSION
H1 615 740 826 915 980 1080 1190 1760 1855
Gear operator recommended 7 LANTERN RING
*
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 DIN CONNECTIONS
31
VALVOSIDER GLOBE VALVES - PRESSURE SEAL
standard features
12
11 7 Description PRESSURE SEAL BONNET
V
10
RISING STEM
20
14 INTEGRAL SEAT
25 LOOSED DISC
8
7 Design
H1 - OPEN
7 BS 1873
19
ASME B16.34
H
26
2
22
23 7 Flanges ASME B16.5 FOR 2” TO 24”
16
18
6 API 6D
5 BS 6755
4
1 L
7 Marking MSS-SP 25
DN 3" 4" 5" 6" 8" 10" 12" 14" 16"
Δ p bar 85 60 35 21 14 9 6 5 4
If higher, valve to be mounted with gear operator or with pressure 7 Certificates EN 10204 - 3.1 B
PART NAM E WP6x IP6x M P6x WCP6x FP6x

3 Seat (integral) Stellite (2)
4 Disc seat surface W CB + HF (1) W C1 + HF (1) W C6 + HF (1) W C9 + HF (1) CF8M + HF (1)
5 Stem F6A (3) F6A (3) F6A (3) F6A (3) F316 (3)
7 Gland F6A F6A F6A F6A F316
10 Yoke nut A 105 A 105 A 105 A 105 F316
11 Handwheel Steel
13 Bolts B7 B16 B16 B16 B8
15 Retaining ring A105 F6A F6A F6A F316
16 Segmental retaining ring F6A F6A F6A F6A F316
18 Gasket S.S. reinforced graphite (5)
22 Segmental ring F6A F6A F6A F6A F316
25 No rotation device 2H G4 G4 G4 G8
26 Bolts B7 B16 B16 B16 B8
32
GLOBE VALVES - PRESSURE SEAL
ASME 600 - 900 - 1500 - 2500
VALVOSIDER
FIG. N. P62 - GLOBE VALVES PRESSURE SEAL ASME CLASS 600

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF 292 356 432 559 660 787 838 889 991 -- -- -- --
L RTJ 295 359 435 562 663 790 841 892 994 -- -- -- --
L BW 292 356 432 559 660 787 838 889 991 -- -- -- --
V 200 250 300 G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- --
H 500 550 590 840 970 1160 1300 1480 1680 -- -- -- --
H1 540 600 670 930 1120 1350 1525 1750 1980 -- -- -- --

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF 368 381 457 610 737 838 965 1029 1130 -- -- -- --
L RTJ 371 384 460 613 740 842 968 1038 1140 -- -- -- --
L BW 368 381 457 610 737 838 965 1029 1130 -- -- -- --
V 250 300 G.O. G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- --
H 500 550 590 840 970 1160 1300 1585 1639 -- -- -- --
H1 540 600 670 930 1120 1350 1525 1850 1940 -- -- -- --

SIZE 2" 3” 4” 6” 8” 10” 12” -- -- -- -- -- --
L RF 368 470 546 705 832 991 1130 -- -- -- -- -- --
L RTJ 371 473 549 711 842 1000 1146 -- -- -- -- -- --
L BW 368 470 546 705 832 991 1130 -- -- -- -- -- --
V 250 G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- -- -- --
H 500 550 590 840 970 1250 1400 -- -- -- -- -- --
H1 540 600 670 930 1120 1350 1525 -- -- -- -- -- --

SIZE 2" 3” 4” 6” 8” 10” 12” -- -- -- -- -- --
L RF 451 578 673 914 1022 1270 1422 -- -- -- -- -- --
L RTJ 454 584 683 927 1038 1292 1445 -- -- -- -- -- --
L BW 451 578 673 914 1022 1270 1422 -- -- -- -- -- --
V G.O. G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- -- -- --
H 500 550 600 860 1000 1330 1700 -- -- -- -- -- --
H1 540 600 680 950 1150 1430 1825 -- -- -- -- -- --
features on request
7 TOP FLANGE TO ISO 5210 7 STEM PROTECTION
7 GEAR OPERATOR 7 STEM EXTENSION
7 CHAIN WHEEL OPERATOR 7 LANTERN RING
7 PNEUMATIC OR HYDRAULIC ACTUATOR 7 EXTENDED STUFFING BOX
7 ELECTRIC ACTUATOR 7 LIVE LOADED PACKING
7 POSITION INDICATOR 7 DRAIN PLUG
7 LIMIT SWITCHES 7 BY PASS
7 LOCKING / INTERLOCK SYSTEM 7 FLANGED ENDS
7 PTFE SOFT SEATS 7 DIN CONNECTIONS
33
VALVOSIDER GLOBE VALVES PRESSURE SEAL - Y TYPE
standard features
11 7 Description PRESSURE SEAL BONNET
12
9
10
RISING STEM
21 V INTEGRAL BACKSEAT
25 INTEGRAL SEAT
14 LOOSED DISC
8
13 7 Design BS 1873
7
H1 - OPEN
2 ASME B16.34
H
19
15
22 7 Flanges ASME B16.5 FOR 2” TO 24”
23
16
18 API 6D
6 BS 6755
5
3
1 L
7 Marking MSS-SP 25
DN 3" 4" 5" 6" 8" 10" 12" 14" 16"
Δ p bar 85 60 35 21 14 9 6 5 4
If higher, valve to be mounted with gear operator or with pressure 7 Certificates EN 10204 - 3.1 B
PART NAM E WP8x IP8x M P8x WCP8x FP8x

4 Disc seat surface W CB + HF (1) W C1 + HF (1) W C6 + HF (1) W C9 + HF (1) CF8M + HF (1)
5 Stem F6A (3) F6A (3) F6A (3) F6A (3) F316 (3)
7 Gland F6A F6A F6A F6A F316
10 Yoke nut A 105 A 105 A 105 A 105 F316
11 Handwheel Steel
13 Bolts B7 B16 B16 B16 B8
22 Segmental ring F6A F6A F6A F6A F316
25 No rotation device 2H G4 G4 G4 G8
26 Bolts B7 B16 B16 B16 B8
34
GLOBE VALVES PRESSURE SEAL - Y TYPE
ASME 600 - 900 - 1500 - 2500
VALVOSIDER
FIG. N. P82 - GLOBE VALVES PRESSURE SEAL - Y TYPE - ASME CLASS 600
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF 292 356 432 559 660 787 838 889 991 -- -- -- --
L RTJ 295 359 435 562 663 790 841 892 994 -- -- -- --
L BW 292 356 432 559 660 787 838 889 991 -- -- -- --
V 200 250 300 G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- --
H 500 550 590 840 970 1080 1200 1360 1540 -- -- -- --
H1 540 600 670 930 1120 1270 1425 1620 1840 -- -- -- --
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” -- -- -- --
L RF 368 381 457 610 737 838 965 1029 1130 -- -- -- --
L RTJ 371 384 460 613 740 842 968 1038 1140 -- -- -- --
L BW 368 381 457 610 737 838 965 1029 1130 -- -- -- --
V 250 300 G.O. G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- --
H 500 550 640 900 960 1080 1200 1380 1585 -- -- -- --
H1 540 600 715 995 1110 1380 1425 1643 1885 -- -- -- --
SIZE 2" 3” 4” 6” 8” 10” 12” -- -- -- -- -- --
L RF 368 470 546 705 832 991 1130 -- -- -- -- -- --
L RTJ 371 473 549 711 842 1000 1146 -- -- -- -- -- --
L BW 368 470 546 705 832 991 1130 -- -- -- -- -- --
V 250 G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- -- -- --
H 520 550 640 900 1165 1210 1575 -- -- -- -- -- --
H1 560 600 715 995 1315 1400 1800 -- -- -- -- -- --
FIG. N. P85 - PRESSURE SEAL GLOBE VALVES - Y TYPE - ASME CLASS 2500
SIZE 2" 3” 4” 6” 8” 10” 12” -- -- -- -- -- --
L RF 451 578 673 914 1022 1270 1422 -- -- -- -- -- --
L RTJ 454 584 683 927 1038 1292 1445 -- -- -- -- -- --
L BW 451 578 673 914 1022 1270 1422 -- -- -- -- -- --
V G.O. G.O. G.O. G.O. G.O. G.O. G.O. -- -- -- -- -- --
H 550 550 670 1145 1235 1435 1610 -- -- -- -- -- --
H1 590 600 750 1240 1385 1625 1835 -- -- -- -- -- --
features on request
7 TOP FLANGE TO ISO 5210 7 STEM PROTECTION
7 GEAR OPERATOR 7 STEM EXTENSION
7 CHAIN WHEEL OPERATOR 7 LANTERN RING
7 PNEUMATIC OR HYDRAULIC ACTUATOR 7 EXTENDED STUFFING BOX
7 LIMIT SWITCHES 7 BY PASS
7 LOCKING / INTERLOCK SYSTEM 7 FLANGED ENDS
7 PTFE SOFT SEATS 7 DIN CONNECTIONS
35
VALVOSIDER ASME CHECK VALVES
DESCRIPTION OF A TYPICAL SWING CHECK VALVE
COVER
GASKET
BOLT
NUT
HINGE PIN A A
PLUG
HINGE
WASHER
PIN
NUT
DISC
SEAT RING
BODY
DISK NUT SEC. A-A
HINGE
HINGE PIN
PLUG
36
VALVOSIDER ASME CHECK VALVES
MANUFACTURER OF VALVES 4
TYPE CLASS SIZES FIG. N.
SWING CHECK 150 2” - 48” 470
VALVES 300 2” - 48” 471
600 2” - 40” 472
REGULAR TYPE
900 2” - 24” 473
OR
FULL OPENING 1500 2” - 24” 474
2500 2” - 12” 475
page 38
PISTON CHECK 150 2” - 16” 460PC

VALVES 300 2” - 16” 461PC
600 2” - 12” 462PC
900 2” - 12” 463PC
1500 2” - 12” 464PC
page 40
PISTON CHECK 150 2” - 24” 490PC

VALVES 300 2” - 24” 491PC
600 2” - 24” 492PC
‘ Y ‘ TYPE
900 2” - 16” 493PC
1500 2” - 16” 494PC
2500 2” - 12” 495PC
page 42
SWING CHECK 600 2” - 24” P72

VALVES 900 2” - 24” P73
1500 2” - 24” P74
PRESSURE SEAL
2500 2” - 12” P75
page 44
LIFT CHECK 600 2” - 16” P62PC

VALVES 900 2” - 16” P63PC
PRESSURE SEAL 1500 2” - 12” P64PC
‘STRAIGHT’
2500 2” - 12” P65PC
page 46
LIFT CHECK 600 2” - 16” P82PC

VALVES 900 2” - 16” P83PC
PRESSURE SEAL 1500 2” - 12” P84PC
‘Y’ PATTERN
2500 2” - 12” P85PC
page 48
TILTING DISC 600 2” - 24” P72T

CHECK VALVES 900 2” - 24” P73T
PRESSURE SEAL 1500 2” - 24” P74T
page 50 2500 2” - 12” P75T
37
VALVOSIDER SWING CHECK VALVES
standard features
2 ? Description REGULAR TYPE OR
13 FULL OPENING
BOLTED COVER
11
LAPPED DISC AND SEAT
H
6 A A RENEWABLE SEAT
7 ? Design BS 1868
5 API 6D
ASME B16.34
D
8
9
? Flanges ASME B16.5 FOR 2” TO 24”
4 ASME B16.47 FOR ? 26”
1 L
? Testing API 598
API 6D
BS 6755
9
SEC. A-A
6 CE - PED
7
PART NAME W47x L47x M47x C47x B47x E47x D47x F47x H47x
2 Cover W CB LCB W C6 C5 C12 CF8 CF8C CF8M CF3M
5 Hinge A105 (3) LF2 (3) F316 (3) F316 (3) F316 (3) F304 (3) F321 (3) F316 (3) F316L (3)
6 Hinge pin F6A F6A F6A F6A F6A F316L F321 F316 F316L
7 Plug A105 F316 F316 F316 F316 F316 F316 F316 F316L
8 Washer A105 F316 F316 F316 F316 F316 F316 F316 F316
9 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
10 Pin F316
11 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8

12 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
13 Gasket ANSI 150-300-600-900-1500: S.S. spiral wound reinf. graphite / RTJ - ANSI 2500: RTJ (4)
(2) On request: faced with Stellite - Monel - Hastelloy - other materials
38
SWING CHECK VALVES
ASME 150 - 300 - 600 - 900 - 1500 - 2500
VALVOSIDER
FIG. N. 470 - SWING CHECK VALVES ANSI 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40” 42” 48”
L RF/BW 203 216 241 292 330 356 495 622 699 787 864 978 978 1295 1448 1524 --- --- 1956 --- --- ---
L RTJ 216 229 254 305 343 368 508 635 711 800 876 991 991 1308 --- --- --- --- --- --- --- ---
D 152 178 191 229 254 279 343 406 483 533 597 635 699 813 927 984 1060 1111 1168 1289 1346 1511
H 150 180 195 220 230 270 330 350 400 440 490 550 620 740 800 840 900 960 1040 1150 1280 1350

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40” 42” 48”
L RF/BW 267 292 318 356 400 445 533 622 711 838 864 978 1016 1346 1499 1594 --- --- 2083 --- --- ---
L RTJ 282 308 333 371 416 460 549 638 727 854 879 994 1035 1369 1524 1619 --- --- 2111 --- --- ---
D 165 191 210 254 279 318 381 445 521 584 648 711 775 914 1035 1092 1149 1207 1270 1238 1289 1467
H 150 180 200 225 270 300 355 390 445 495 530 610 660 750 --- --- --- --- --- --- --- ---

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 30” 32” 34” 36” 40” 42” 48”
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 1092 1194 1397 1549 1651 --- --- 2083 --- --- ---
L RTJ 295 333 359 435 511 562 663 790 841 892 994 1095 1200 1407 1560 1664 --- --- 2099 --- --- ---
D 165 191 210 273 330 356 419 508 559 603 686 743 813 940 1073 1130 1194 1245 1315 1321 --- ---
H 194 211 230 292 306 368 408 468 516 564 666 740 838 --- --- --- --- --- --- --- --- ---
FIG. N. 473 - SWING CHECK VALVES ANSI 900 features on request

SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28”
7 DISC WITH PTFE OR RUBBER
L RF/BW 368 381 457 610 737 838 965 1029 1130 1219 1321 1549 ---
L RTJ 371 384 460 613 740 842 968 1038 1140 1232 1334 1568 --- 7 LEVER AND WEIGHT
D 216 241 292 381 470 546 610 641 705 787 857 1041 ---
H 263 265 326 352 409 536 600 700 762 822 885 1000 --- 7 SHOCK ABSORBER
7 LOCKING DEVICE
7 INTEGRAL SEAT
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28”
L RF/BW 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943 --- 7 DRAIN PLUG
L RTJ 371 473 549 711 842 1000 1146 1276 1407 1559 1686 1972 ---
D 216 267 311 394 483 584 673 749 826 914 984 1168 --- 7 BY PASS
H 263 304 423 506 716 762 818 --- --- --- --- --- ---
7 BW ENDS
7 RTJ FLANGES
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 7 DIN CONNECTIONS
L RF/BW 451 578 673 914 1022 1270 1422 --- --- --- --- --- ---
L RTJ 454 584 683 927 1038 1292 1445 --- --- --- --- --- ---
D 235 305 356 483 552 673 762 --- --- --- --- --- ---
H --- --- --- --- --- --- --- --- --- --- --- --- ---
39
VALVOSIDER PISTON CHECK VALVES
standard features
? Description BOLTED COVER
RETURN SPRING
WALL THICKNESS TO API 600
RENEWABLE SEAT
? Design BS 1873
2
API 600
8 ASME B16.34
6
H
7
D
3
? Testing API 598
1
API 6D
BS 6755

L
? Marking MSS-SP 25
CE - PED
PART NAME W46xPC L46xPC M46xPC C46xPC B46xPC E46xPC D46xPC F46xPC H46xPC
5 Spring F316
6 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
7 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8

(3) On request: PTFE - other materials
40
PISTON CHECK VALVES
ASME 150 - 300 - 600 - 900 - 1500
VALVOSIDER
FIG. N. 460PC - PISTON CHECK VALVES ASME CLASS 150

SIZE 2" 2 3 4 5 6 8 10 12 14 16 --- --- --- ---
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 --- --- --- ---
L RTJ 216 219 254 305 368 419 508 635 711 800 927 --- --- --- ---
D 152 178 191 229 254 279 343 406 483 533 597 --- --- --- ---
H 155 180 185 195 215 250 295 330 380 420 500 --- --- --- ---
FIG. N. 461PC - PISTON CHECK VALVES ASME CLASS 300

SIZE 2" 2 3 4 5 6 8 10 12 14 16 --- --- --- ---
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 --- --- --- ---
L RTJ 282 308 333 371 416 460 575 638 727 854 879 --- --- --- ---
D 165 191 210 254 279 318 381 445 521 584 648 --- --- --- ---
H 155 180 195 220 255 285 335 350 430 495 500 --- --- --- ---
FIG. N. 462PC - PISTON CHECK VALVES ASME CL. 600

features on request
SIZE 2" 2 3 4 5 6 8 10 12
7 DISC WITH PTFE OR RUBBER
L RF/BW 292 330 356 432 508 559 660 787 838
L RTJ 295 333 359 435 511 562 663 790 841 7 INTEGRAL SEAT
D 165 191 210 273 330 356 419 508 559
H 155 180 195 220 306 320 380 480 505 7 DRAIN PLUG
7 BY PASS
FIG. N. 463PC - PISTON CHECK VALVES ASME CL. 900 7 BW ENDS
SIZE 2" 2 3 4 5 6 8 10 12
L RF/BW 368 419 381 457 559 610 737 838 965 7 RTJ FLANGES
L RTJ 371 422 384 460 562 613 740 842 968
7 DIN CONNECTIONS
D 216 244 241 292 349 381 470 546 610
H 220 230 240 280 330 365 409 536 600
FIG. N. 464PC - PISTON CHECK VALVES ASME CL.1500

SIZE 2" 2 3 4 5 6 8 10 12
L RF/BW 368 419 470 546 673 705 832 991 1130
L RTJ 371 422 473 549 676 711 842 1000 1146
D 216 244 267 311 375 394 483 584 673
H 220 230 280 325 400 430 716 762 818
41
VALVOSIDER PISTON CHECK VALVES - ‘Y’ TYPE
standard features
RETURN SPRING
WALL THICKNESS TO API 600
RENEWABLE SEAT
? Design BS 1873
2
API 600
5 ASME B16.34
7
H
8
3
4
D
1
? Testing API 598
API 6D
BS 6755

L
? Marking MSS-SP 25
CE - PED
PART NAME W49xPC L49xPC M49xPC C49xPC B49xPC E49xPC D49xPC F49xPC H49xPC
5 Spring F316
6 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
7 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8

42
PISTON CHECK VALVES - ‘ Y ‘ TYPE VALVOSIDER
FIG. N. 490PC - PISTON CHECK VALVES 'Y' TYPE ASME CLASS 150
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18" 20" 24" ---
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 978 978 1295 ---
L RTJ 216 219 254 305 368 419 508 635 711 800 927 991 991 1308 ---
D 152 178 191 229 254 279 343 406 483 533 597 635 699 813 ---
H 146 185 195 235 301 366 530 530 665 --- --- --- --- --- ---
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18" 20" 24" ---
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 978 1016 1346 ---
L RTJ 282 308 333 371 416 460 575 638 727 854 879 994 1035 1368 ---
D 165 191 210 254 279 318 381 445 521 584 648 711 775 914 ---
H 145 190 223 235 300 330 365 570 740 --- --- --- --- --- ---
SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18" 20" 24" ---
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 1092 1194 1397 ---
L RTJ 295 333 359 435 511 562 663 790 841 892 994 1095 1200 1407 ---
D 165 191 210 273 330 356 419 508 559 603 686 743 813 940 ---
H 185 210 230 290 370 425 470 --- --- --- --- --- --- --- ---
FIG. N. 493PC - PISTON CHECK V. 'Y' TYPE ASME CL.900 features on request
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 7 DISC WITH PTFE OR RUBBER
L RF/BW 368 381 457 610 737 838 965 1029 1130
L RTJ 371 384 460 613 740 842 968 1038 1140 7 INTEGRAL SEAT
D 216 241 292 381 470 546 610 641 705
7 DRAIN PLUG
H --- --- --- --- --- --- --- --- ---
7 BY PASS
FIG. N. 494PC - PISTON CHECK V. 'Y' TYPE ASME CL.1500 7 BW ENDS
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16”
L RF/BW 368 470 546 705 832 991 1130 1257 1384 7 RTJ FLANGES
L RTJ 371 473 549 711 842 1000 1146 1276 1407
7 DIN CONNECTIONS
D 216 267 311 394 483 584 673 749 826
H --- --- --- --- --- --- --- --- ---
FIG. N. 495PC - PISTON CHECK V. 'Y' TYPE ASME CL.2500

SIZE 2" 3” 4” 6” 8” 10” 12” --- ---
L RF/BW 451 578 673 914 1022 1270 1422 --- ---
L RTJ 454 584 683 927 1038 1292 1445 --- ---
D 235 305 356 483 552 673 762 --- ---
H --- --- --- --- --- --- --- --- ---
43
VALVOSIDER SWING CHECK VALVES - PRESSURE SEAL
standard features
? Description PRESSURE SEAL BONNET
FULL BORE
WELDED IN SEATS
15
11 ? Design BS 1868
12 API 6D
13
2
? Flanges
H
ASME B16.5
6
7
5 ? Testing API 598
8 API 6D
10 BS 6755
9
4
3
1 CE - PED
PART NAME WP7x IP7x MP7x WCP7x FP7x

2 Cover W CB W C1 W C6 W C9 CF8M
4 Disc - seat A105 + HF (2) F6A + HF (2) F6A + HF (2) F6A + HF (2) F316 + HF (2)
5 Hinge W CB W C1 W C6 W C9 CF8M
6 Hinge pin F6A F6A F6A F6A F316
7 Plug (externally) A105 F316 F316 F316 F316
8 Washer A105 F316 F316 F316 F316
9 Nut 2H G4 G4 G4 G8
10 Pin F316 F316 F316 F316 F316
15 Bolt B7 B16 B16 B16 B8

(3) On request: Soft iron - Stainless steel
44
SWING CHECK VALVES - PRESSURE SEAL
ASME 600 - 900 - 1500 - 2500
VALVOSIDER
FIG. N. P72 - SWING CHECK VALVES PRESSURE SEAL ASME CLASS 600
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18" 20" 24" --- --- ---
L RF/BW 292 356 432 559 660 787 838 889 991 1092 1194 1397 --- --- ---
L RTJ 295 359 435 562 663 790 841 892 994 1095 1200 1407 --- --- ---
H 180 215 275 350 390 450 500 555 630 710 800 1000 --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18" 20" 24" --- --- ---
L RF/BW 368 381 457 610 737 838 965 1029 1130 1219 1321 1549 --- --- ---
L RTJ 371 384 460 613 740 842 968 1038 1140 1232 1334 1568 --- --- ---
H 245 250 310 390 510 580 620 680 740 800 850 1100 --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18" 20" 24" --- --- ---
L RF/BW 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943 --- --- ---
L RTJ 371 473 549 711 842 1000 1146 1276 1407 1559 1686 1972 --- --- ---
H 245 290 350 420 630 690 750 800 980 1100 1300 1550 --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” --- --- --- --- --- --- --- ---
L RF/BW 451 578 673 914 1022 1270 1422 --- --- --- --- --- --- --- ---
L RTJ 454 584 683 927 1038 1292 1445 --- --- --- --- --- --- --- ---
H 245 300 380 430 650 720 780 --- --- --- --- --- --- --- ---
features on request
7 DISC WITH PTFE OR RUBBER 7 DRAIN PLUG
7 LEVER AND WEIGHT 7 BY PASS
7 SHOCK ABSORBER 7 FLANGED ENDS
7 LOCKING DEVICE 7 RTJ FLANGES
7 INTEGRAL SEAT 7 DIN CONNECTIONS
45
VALVOSIDER LIFT CHECK VALVES - PRESSURE SEAL
MANUFACTURER OF VALVES STRAIGHT TYPE - ASME 600 - 900 - 1500 - 2500
standard features
INTEGRAL SEAT
9
? Design BS 1873
5 API 6D
6
H
8
2
10
4 ? Testing API 598
3 API 6D
1 BS 6755

L
? Marking MSS-SP 25
CE - PED
PART NAME WP6xPC IP6xPC MP6xPC WCP6xPC FP6xPC
1 Body WCB WC1 WC6 WC9 CF8M
2 Cover WCB WC1 WC6 WC9 CF8M
4 Disc - seat A105 + HF (2) F6A + HF (2) F6A + HF (2) F6A + HF (2) A182 F316 + HF (2)
9 Bolt B7 B16 B16 B16 B8
10 Spring F316
(1) On request: faced with Monel - Hastelloy - other materials

46
LIFT CHECK VALVES - PRESSURE SEAL VALVOSIDER
STRAIGHT TYPE - ASME 600 - 900 - 1500 - 2500 MANUFACTURER OF VALVES
FIG. N. P62PC - LIFT CHECK VALVES PRESSURE SEAL STRAIGHT TYPE - ASME CLASS 600
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” --- --- --- --- --- ---
L RF/BW 292 356 432 559 660 787 838 889 991 --- --- --- --- --- ---
L RTJ 295 359 435 562 663 790 841 892 994 --- --- --- --- --- ---
H 230 280 330 450 520 600 700 800 900 --- --- --- --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” --- --- --- --- --- ---
L RF/BW 368 381 457 610 737 838 965 1029 1130 --- --- --- --- --- ---
L RTJ 371 384 460 613 740 842 968 1038 1140 --- --- --- --- --- ---
H 270 300 390 430 520 600 700 800 900 --- --- --- --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” --- --- --- --- --- --- --- ---
L RF/BW 368 470 546 705 832 991 1130 --- --- --- --- --- --- --- ---
L RTJ 371 473 549 711 842 1000 1146 --- --- --- --- --- --- --- ---
H 270 310 400 440 530 620 720 --- --- --- --- --- --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” --- --- --- --- --- --- --- ---
L RF/BW 451 578 673 914 1022 1270 1422 --- --- --- --- --- --- --- ---
L RTJ 454 584 683 927 1038 1292 1445 --- --- --- --- --- --- --- ---
H 270 310 400 440 530 620 720 --- --- --- --- --- --- --- ---
features on request
7 DISC WITH PTFE OR RUBBER 7 BY PASS
7 INTEGRAL SEAT 7 FLANGED ENDS
7 RENEWABLE SEAT 7 RTJ FLANGES
7 DRAIN PLUG 7 DIN CONNECTIONS
47
MANUFACTURER OF VALVES ‘ Y ’ TYPE - ASME 600 - 900 - 1500 - 2500
standard features
INTEGRAL SEAT
9 ? Design BS 1873
5 API 6D
6
7
H
8
10
4 ? Testing API 598
3 API 6D
BS 6755
1

L
? Marking MSS-SP 25
CE - PED
PART NAME WP8xPC IP8xPC MP8xPC WCP8xPC FP8xPC
1 Body WCB WC1 WC6 WC9 CF8M
2 Cover WCB WC1 WC6 WC9 CF8M
4 Disc - seat A105 + HF (2) F6A + HF (2) F6A + HF (2) F6A + HF (2) A182 F316 + HF (2)
9 Bolt B7 B16 B16 B16 B8
10 Spring F316

48
‘ Y ‘ TYPE - ASME 600 - 900 - 1500 - 2500 MANUFACTURER OF VALVES
FIG. N. P82PC - LIFT CHECK VALVES PRESSURE SEAL - 'Y' TYPE - ASME CLASS 600
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” --- --- --- --- --- ---
L RF/BW 292 356 432 559 660 787 838 889 991 --- --- --- --- --- ---
L RTJ 295 359 435 562 663 790 841 892 994 --- --- --- --- --- ---
H 253 308 363 495 572 660 770 880 990 --- --- --- --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” --- --- --- --- --- ---
L RF/BW 368 381 457 610 737 838 965 1029 1130 --- --- --- --- --- ---
L RTJ 371 384 460 613 740 842 968 1038 1140 --- --- --- --- --- ---
H 297 330 429 473 572 660 770 880 990 --- --- --- --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” --- --- --- --- --- --- --- ---
L RF/BW 368 470 546 705 832 991 1130 --- --- --- --- --- --- --- ---
L RTJ 371 473 549 711 842 1000 1146 --- --- --- --- --- --- --- ---
H 297 341 440 484 583 682 792 --- --- --- --- --- --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” --- --- --- --- --- --- --- ---
L RF/BW 451 578 673 914 1022 1270 1422 --- --- --- --- --- --- --- ---
L RTJ 454 584 683 927 1038 1292 1445 --- --- --- --- --- --- --- ---
H 297 341 440 484 583 682 792 --- --- --- --- --- --- --- ---
features on request
7 DISC WITH PTFE OR RUBBER 7 BY PASS
7 INTEGRAL SEAT 7 FLANGED ENDS
7 RENEWABLE SEAT 7 RTJ FLANGES
7 DRAIN PLUG 7 DIN CONNECTIONS
49
VALVOSIDER TILTING DISC CHECK VALVES
MANUFACTURER OF VALVES PRESSURE SEAL - ASME 600 - 900 - 1500 - 2500
standard features
11 ? Description PRESSURE SEAL BONNET
7 LAPPED DISC AND SEAT
INTEGRAL SEAT
8
H
9
10 ? Design BS 1873
2 API 6D
5
4
3
? Testing API 598

6 API 6D
BS 6755
? Marking MSS-SP 25
CE - PED

L
PART NAME WP7xT IP7xT MP7xT WCP7xT FP7xT
2 Cover W CB W C1 W C6 W C9 CF8M
4 Disc - seat A105 + HF (2) F6A + HF (2) F6A + HF (2) F6A + HF (2) F316 + HF (2)
5 Pin F6A F6A F6A F6A F316
6 Plug (externally) A105 F6A F6A F6A F316
7 Retaining ring A105 F316 F316 F316 F316
11 Bolt B7 B16 B16 B16 B8

50
TILTING DISC CHECK VALVES
PRESSURE SEAL - ASME 600 - 900 - 1500 - 2500
VALVOSIDER
FIG. N. P72T - TILTING DISC CHECK VALVES PRESSURE SEAL ASME CLASS 600
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18" 20" 24" --- --- ---
L RF 292 356 432 559 660 787 838 889 991 1092 1194 1397 --- --- ---
L RTJ 295 359 435 562 663 790 841 892 994 1095 1200 1407 --- --- ---
L BW 178 254 305 457 584 711 813 889 991 1092 1194 1397 --- --- ---
H 180 215 275 350 390 450 500 555 630 710 800 1000 --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18" 20" 24" --- --- ---
L RF 368 381 457 610 737 838 965 1029 1130 1219 1321 1549 --- --- ---
L RTJ 371 384 460 613 740 842 968 1038 1140 1232 1334 1568 --- --- ---
L BW 216 305 356 508 660 787 914 991 1092 1143 1245 1397 --- --- ---
H 245 250 310 390 510 580 620 680 740 800 850 1100 --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18" 20" 24" --- --- ---
L RF 368 470 546 705 832 991 1130 1257 1384 1537 1664 1943 --- --- ---
L RTJ 371 473 549 711 842 1000 1146 1276 1407 1559 1686 1972 --- --- ---
L BW 216 305 406 559 711 864 991 1067 1194 1346 1473 1943 --- --- ---
H 245 290 350 420 630 690 750 800 980 1100 1300 1550 --- --- ---
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 18" 20" 24" --- --- ---
L RF 451 578 673 914 1022 1270 1422 --- --- --- --- --- --- --- ---
L RTJ 454 584 683 927 1038 1292 1445 --- --- --- --- --- --- --- ---
L BW 279 368 457 610 762 914 1041 --- --- --- --- --- --- --- ---
H 245 300 380 430 650 720 780 --- --- --- --- --- --- --- ---
features on request
7 DISC WITH PTFE OR RUBBER 7 DRAIN PLUG
7 LEVER AND WEIGHT 7 BY PASS
7 SHOCK ABSORBER 7 FLANGED ENDS
7 INTEGRAL SEAT 7 DIN CONNECTIONS
51
VALVOSIDER
MANUFACTURER OF VALVES ASME STRAINERS
DESCRIPTION OF A TYPICAL STRAINER ‘Y’ TYPE
BODY
SCREEN
GASKET
BOLT
NUT
COVER
52
VALVOSIDER ASME STRAINERS
STRAINERS 150 2” - 24” 490

300 2” - 24” 491
‘ Y ‘ TYPE
600 2” - 24” 492
900 2” - 16” 493
1500 2” - 16” 494
2500 2” - 12” 495
page 54
STRAINERS 150 2” - 16” 490BK

300 2” - 16” 491BK
BASKET TYPE
600 2” - 16” 492BK
900 2” - 12” 493BK
1500 2” - 12” 494BK
2500 2” - 8” 495BK
page 56
53
VALVOSIDER STRAINERS - ‘ Y ‘ TYPE
standard features

REPLACEABLE SCREEN
L
? Design BS 1873
API 600
ASME B16.34
D
H1 - OPEN
1
H
3
BW TO ASME B16.25
6
4
? Testing API 598
5
2
API 6D
BS 6755
? Marking MSS-SP 25
CE - PED
PART NAME W49x L49x M49x C49x B49x E49x D49x F49x H49x
3 Screen F304 (1) F304 (1) F304 (1) F304 (1) F304 (1) F304 (1) F321 (1) F316 (1) F316L (1)
4 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
5 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
6 Gasket ANSI 150 - 300 - 600 - 900 - 1500 : S.S. spiral wound reinf. Graphite / RTJ - ANSI 2500 : RTJ (2)
(1) On request: other materials

54
STRAINERS - ‘ Y ‘ TYPE VALVOSIDER
FIG. N. 490 - STRAINERS - Y TYPE - ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18" 20" 24" ---
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 978 978 1295 ---
L RTJ 216 219 254 305 368 419 508 635 711 800 927 991 991 1308 ---
D 152 178 191 229 254 279 343 406 483 533 597 635 699 813 ---
H 146 185 195 235 301 366 530 530 665 --- --- --- --- --- ---
H1 222 274 285 350 440 537 733 733 880 --- --- --- --- --- ---

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18" 20" 24" ---
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 978 1016 1346 ---
L RTJ 282 308 333 371 416 460 575 638 727 854 879 994 1035 1368 ---
D 165 191 210 254 279 318 381 445 521 584 648 711 775 914 ---
H 145 190 223 235 300 330 365 570 740 --- --- --- --- --- ---
H1 228 290 328 362 450 489 555 892 1040 --- --- --- --- --- ---

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” 18" 20" 24" ---
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 1092 1194 1397 ---
L RTJ 295 333 359 435 511 562 663 790 841 892 994 1095 1200 1407 ---
D 165 191 210 273 330 356 419 508 559 603 686 743 813 940 ---
H 185 210 230 290 370 425 470 --- --- --- --- --- --- --- ---
H1 267 305 335 427 540 602 680 --- --- --- --- --- --- --- ---

features on request
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16”
L RF/BW 368 381 457 610 737 838 965 1029 1130 7 SCREEN IN SPECIAL MATERIAL
L RTJ 371 384 460 613 740 842 968 1038 1140
D 216 241 292 381 467 546 610 641 705 7 DISCHARGE VALVE
H 320 340 370 455 --- --- --- --- ---
H1 690 510 550 675 --- --- --- --- --- 7 DRAIN PLUG
7 BW ENDS
SIZE 2" 3” 4” 6” 8” 10” 12” 14” 16” 7 RTJ FLANGES
L RF/BW 368 470 546 705 832 991 1130 1257 1384
L RTJ 371 473 549 711 842 1000 1146 1276 1407 7 DIN CONNECTIONS
D 216 267 311 394 483 584 673 749 826
H --- --- --- --- --- --- --- --- ---
H1 --- --- --- --- --- --- --- --- ---

SIZE 2" 3” 4” 6” 8” 10” 12” --- ---
L RF/BW 451 578 673 914 1022 1270 1422 --- ---
L RTJ 454 584 683 927 1038 1292 1445 --- ---
D 235 305 356 483 552 673 762 --- ---
H --- --- --- --- --- --- --- --- ---
H1 --- --- --- --- --- --- --- --- ---
55
VALVOSIDER STRAINERS - BASKET TYPE
standard features
L ? Description BOLTED COVER

REPLACEABLE SCREEN
? Design BS 1873
API 600
D
ASME B16.34

1
H ? Flanges ASME B16.5
3
BW TO ASME B16.25
6
H1 - OPEN
2
? Testing API 598
5 API 6D
4 BS 6755
? Marking MSS-SP 25
CE - PED
PART NAME W49xBK L49xBK M49xBK C49xBK B49xBK E49xBK D49xBK F49xBK H49xBK
3 Screen F304 (1) F304 (1) F304 (1) F304 (1) F304 (1) F304 (1) F321 (1) F316 (1) F316L (1)
4 Bolts B7 L7 B16 B16 B16 B8 B8 B8 B8
5 Nuts 2H G4 G4 G4 G4 G8 G8 G8 G8
6 Gasket ANSI 150 - 300 - 600 - 900 - 1500 : S.S. spiral wound reinf. Graphite / RTJ - ANSI 2500 : RTJ (2)
(1) On request: other materials

56
STRAINERS - BASKET TYPE
ASME 150 - 300 - 600 - 900 - 1500 - 2500
VALVOSIDER
FIG. N. 490BK - STRAINERS BASKET TYPE - ASME CLASS 150

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” --- --- --- ---
L RF/BW 203 216 241 292 356 406 495 622 699 787 914 --- --- --- ---
L RTJ 216 219 254 305 368 419 508 635 711 800 927 --- --- --- ---
D 152 178 191 229 254 279 343 406 483 533 597 --- --- --- ---
H 146 185 195 235 301 366 530 530 665 --- --- --- --- --- ---
H1 222 274 285 350 440 537 733 733 880 --- --- --- --- --- ---

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” --- --- --- ---
L RF/BW 267 292 318 356 400 445 559 622 711 838 864 --- --- --- ---
L RTJ 282 308 333 371 416 460 575 638 727 854 879 --- --- --- ---
D 165 191 210 254 279 318 381 445 521 584 648 --- --- --- ---
H 145 190 223 235 300 330 365 570 740 --- --- --- --- --- ---
H1 228 290 328 362 450 489 555 892 1040 --- --- --- --- --- ---

SIZE 2" 2½” 3” 4” 5” 6” 8” 10” 12” 14” 16” --- --- --- ---
L RF/BW 292 330 356 432 508 559 660 787 838 889 991 --- --- --- ---
L RTJ 295 333 359 435 511 562 663 790 841 892 994 --- --- --- ---
D 165 191 210 273 330 356 419 508 559 603 686 --- --- --- ---
H 185 210 230 290 370 425 470 --- --- --- --- --- --- --- ---
H1 267 305 335 427 540 602 680 --- --- --- --- --- --- --- ---

features on request
SIZE 2" 3” 4” 6” 8” 10” 12” --- ---
L RF/BW 368 381 457 610 737 838 965 --- --- 7 SCREEN IN SPECIAL MATERIAL
L RTJ 371 384 460 613 740 842 968 --- ---
D 216 241 292 381 467 546 610 --- --- 7 DISCHARGE VALVE
H --- --- --- --- --- --- --- --- ---
H1 --- --- --- --- --- --- --- --- --- 7 DRAIN PLUG
7 BW ENDS
SIZE 2" 3” 4” 6” 8” 10” 12” --- --- 7 RTJ FLANGES
L RF/BW 368 470 546 705 832 991 1130 --- ---
L RTJ 371 473 549 711 842 1000 1146 --- --- 7 DIN CONNECTIONS
D 216 267 311 394 483 584 673 --- ---
H --- --- --- --- --- --- --- --- ---
H1 --- --- --- --- --- --- --- --- ---

SIZE 2" 3” 4” 6” 8” --- --- --- ---
L RF/BW 451 578 673 914 1022 --- --- --- ---
L RTJ 454 584 683 927 1038 --- --- --- ---
D 235 305 356 483 552 --- --- --- ---
H --- --- --- --- --- --- --- --- ---
H1 --- --- --- --- --- --- --- --- ---
57
VALVOSIDER
MANUFACTURER OF VALVES DIN GATE VALVES
DESCRIPTION OF A TYPICAL GATE VALVE - BELLOW SEAL
HANDWHEEL
HANDWHEEL NUT
YOKE NUT
GREASE NIPPLE
YOKE SLEEVE
NO ROT. DEVICE
NUTS
GLAND FLANGE
GLAND
EYE BOLTS
EYE BOLT PIN
PACKING
BONNET
BACK SEAT
GASKET
NUTS
BOLTS
BELLOW FLANGE
EXTENSION
BELLOW
BOLTS
NUTS
GASKET
STEM
WEDGE
SEAT RING
BODY
58
VALVOSIDER DIN GATE VALVES
TYPE CLASS SIZES FIG. N
GATE VALVES PN 16 - F4 50 - 900 1180

BOLTED BONNET PN 16 - F5 50 - 1400 1190
OVAL TYPE
page 60
GATE VALVES PN 16 50 - 1400 1200

BOLTED BONNET PN 25 50 - 1400 1210
ROUND TYPE
PN 40 50 - 1000 1220
PN 63 50 - 600 1230
PN 100 50 - 600 1240
PN 160 50 - 400 1250
page 62
GATE VALVES PN 16 50 - 600 1200EB

CRYOGENIC PN 25 50 - 600 1210EB
EXTENDED
BONNET PN 40 50 - 600 1220EB
PN 63 50 - 600 1230EB
PN 100 50 - 600 1240EB
page 64
GATE VALVES PN 16 50 - 600 1200SO

BELLOW SEAL PN 25 50 - 600 1210SO
PN 40 50 - 600 1220SO
PN 63 50 - 600 1230SO
PN 100 50 - 600 1240SO
page 66
GATE VALVES PN 100 50 - 600 P24

PRESSURE SEAL PN 160 50 - 600 P25
PN 250 50 - 600 P26
PN 320 50 - 600 P27
PN 420 50 - 600 P28
page 68
59
VALVOSIDER
GATE VALVES OVAL BODY
DIN PN 16 - F4 - DIN PN 16 - F5
V V
11 11
12 12
10 10
20 20
9 9
16 16
8 8
H1 - OPEN
H1 - OPEN
15 15
7 7
H
H
17 17
19 19
6 6
2 2
13 13
14 14
18 18
D
D
5 5
4 4
3 3
1 1
L L
FIG. 1180 - DIN PN 16: Face to Face F4 FIG. 1190 - DIN PN 16: Face to Face F5
PART NAME A1180 - A1190 C1180 - C1190 FH1180 - FH1190 FK1180 - FK1190
1 Body 1.0619 1.7365 1.4552 1.4581
2 Bonnet 1.0619 1.7365 1.4552 1.4581
3 Seat ring surface X20Cr13 (1) X20Cr13 + HF (1) X6CrNiTi18-10 (1) X5CrNiMo17-12-2 (1)
4 Wedge seat surfaces X20Cr13 (2) X20Cr13 + HF (2) X6CrNiTi18-10 (2) X5CrNiMo17-12-2 (2)
5 Stem X20Cr13 (3) X20Cr13 (3) X6CrNiTi18-10 (3) X5CrNiMo17-12-2 (3)
6 Back seat X20Cr13 (3) X20Cr13 (3) X6CrNiTi18-10 (3) X5CrNiMo17-12-2 (3)
7 Gland X20Cr13 (3) X20Cr13 (3) X6CrNiTi18-10 (3) X5CrNiMo17-12-2 (3)
8 Gland flange 1.0460 X5CrNiMo17-12-2 X6CrNiTi18-10 X5CrNiMo17-12-2
9 Yoke sleeve MS58 (4) MS58 (4) MS58 (4) MS58 (4)
10 Yoke nut 1.0460 1.0460 X6CrNiTi18-10 X5CrNiMo17-12-2
11 Handwheel (*) Steel
12 Handwheel nut 1.0460 1.0460 X6CrNiTi18-10 X5CrNiMo17-12-2
13 Bolts CK35 21CrMoV57 A2-70 A2-70
14 Nuts C35 24CrMo5 A2-70 A2-70
15 Eye bolts CK35 24CrMo5 A2-70 A2-70
16 Nuts C35 24CrMo5 A2-70 A2-70
17 Eye bolt pin CK35 24CrMo5 A2-70 A2-70
(1) On request: faced with Stellite - Monel - Hastelloy - other materials (4) On request: GGG50 - Nitronic 60
(*) Gear operator recommended from DN 500.
60
GATE VALVES OVAL BODY
DIN PN 16 - F4 - DIN PN 16 - F5
VALVOSIDER
FIG. N. 1180 - GATE VALVES OVAL BODY DIN PN 16 - Face to Face F4

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 -- -- -- --
L RF/BW 150 170 180 190 200 210 230 250 270 290 310 350 390 430 470 510 -- -- -- --
D 165 185 200 220 250 285 340 405 460 520 580 715 840 910 1025 1125 -- -- -- --
V 200 200 225 250 280 300 400 500 500 600 600 600 600 1000 1200 1200 -- -- -- --
H 350 420 500 520 610 700 900 1050 1200 1400 1580 1900 2300 2600 3200 4400 -- -- -- --
H1 415 495 580 620 720 840 1100 1300 1540 1750 1980 2450 3000 3500 4100 5500 -- -- -- --
FIG. N. 1190 - GATE VALVES OVAL BODY DIN PN 16 - Face to Face F5

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 270 280 300 325 350 400 450 500 550 600 650 700 800 900 1000 1100 1200 1400 1600
D 165 185 200 220 250 285 340 405 460 520 580 640 715 840 910 1025 1125 1255 1485 1685
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 1000 1200 1200 1200 1400 1400
H 350 430 500 520 610 700 900 1050 1200 1400 1580 1750 1900 2300 2600 3200 4400 4700 5200 6200
H1 415 495 580 620 720 840 1100 1300 1540 1750 1980 2200 2450 3000 3500 4100 5500 5900 6600 7900
standard features features on request

? Description OVAL BODY 7 TOP FLANGE TO ISO 5210
BOLTED BONNET
7 GEAR OPERATOR
RISING STEM 7 CHAIN WHEEL OPERATOR
NON RISING HANDWHEEL 7 PNEUMATIC ACTUATOR
FLEXIBLE WEDGE
RENEWABLE SEATS 7 HYDRAULIC ACTUATOR
7 ELECTRIC ACTUATOR
? Design DIN 3352
DIN 3840
7 LIMIT SWITCHES
? Face to face DIN 3202
? Flanges DIN 2501 7 PTFE SOFT SEATS
DIN 2543 7 STEM PROTECTION
DIN 2526 FORM E
BW TO DIN 3239 7 STEM EXTENSION
7 LANTERN RING
? Testing DIN 3352 Part 1
DIN 3230 Part 3
? Rating DIN 2401
7 DRAIN PLUG
? Marking EN 19 7 BY PASS
CE - PED 7 BW ENDS
? Certificates EN 10204 – 3.1 B 7 ANSI CONNECTIONS

61
VALVOSIDER GATE VALVES ROUND BODY
MANUFACTURER OF VALVES DIN PN 16 - 25 - 40 - 63 - 100 - 160
standard features
12
V ? Description ROUND BODY
BOLTED BONNET
11
10 RISING STEM
9 FLEXIBLE WEDGE
16
RENEWABLE SEATS
8
? Design DIN 3352
15 DIN 3840
H1 - OPEN
7
17 H ? Face to face DIN 3202
19
? Flanges DIN 2501
6
DIN 2547
2 DIN 2526 FORM E
13 BW TO DIN 3239
14
18 ? Testing DIN 3352 Part 1
DIN 3230 Part 3
5
D
4
? Rating DIN 2401
3
1 ? Marking EN 19
L CE - PED
STARTING FROM THE FOLLOWING DN/PN
DN
PN
500
16
400
25
300
40
200
63
200
100
150
160
PART NAME A12xx C12xx FH12xx FK12xx

1 Body 1.0619 1.7365 1.4552 1.4581
2 Bonnet 1.0619 1.7365 1.4552 1.4581
9 Yoke sleeve MS58 (4) MS58 (4) MS58 (4) MS58 (4)
11 Handwheel Steel
14 Nuts C35 24CrMo5 A2-70 A2-70
16 Nuts C35 24CrMo5 A2-70 A2-70
18 Gasket S.S. Reinforced graphite (5)
62
GATE VALVES ROUND BODY VALVOSIDER
DIN PN 16 - 25 - 40 - 63 - 100 - 160 MANUFACTURER OF VALVES
FIG. N. 1200 - GATE VALVES DIN PN 16 - Face to Face F5

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 270 280 300 325 350 400 450 500 550 600 650 700 800 900 1000 1100 1200 1400 1600
D 165 185 200 220 250 285 340 405 460 520 580 640 715 840 910 1025 1125 1255 1485 1685
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 1000 1200 1200 1200 1400 1400
H 400 420 500 520 610 620 780 1050 1200 1400 1580 1750 1900 2300 2600 3200 4400 4700 5200 6200
H1 470 495 580 620 720 760 980 1300 1540 1750 1980 2200 2450 3000 3500 4100 5500 5900 6600 7900

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 270 280 300 325 350 400 450 500 550 600 650 700 800 900 1000 1100 1200 1400 1600
D 165 185 200 235 270 300 360 425 485 555 620 670 730 845 960 1085 1185 1320 1530 1755
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 1000 1200 1200 1200 1400 1400
H 400 430 500 520 610 700 900 1050 1200 1400 1580 1750 1900 2300 2600 3200 4400 4700 5200 6200
H1 470 495 580 620 720 840 1100 1300 1540 1750 1980 2200 2450 3000 3500 4100 5500 5900 6600 7900

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 -- --
L RF/BW 250 290 310 350 400 450 550 650 750 850 950 1050 1150 1350 1550 1750 1950 2150 -- --
D 165 185 200 235 270 300 375 450 515 580 660 685 755 890 995 1140 1250 1360 -- --
V 200 200 225 250 300 400 500 500 600 700 700 800 1000 1200 1200 1400 1400 1400 -- --
H 400 430 500 520 610 700 900 1050 1200 1400 1580 1750 1900 2300 2600 3200 4400 4700 -- --
H1 470 495 580 620 720 840 1100 1300 1540 1750 1980 2200 2450 3000 3500 4100 5500 5900 -- --
FIG. N. 1230 - GATE VALVES DIN PN 63 - Face to Face F7 features on request

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 7 TOP FLANGE TO ISO 5210
L RF/BW 250 290 310 350 400 450 550 650 750 850 950 1150 1350 7 GEAR OPERATOR
D 180 205 215 250 295 345 415 470 530 600 670 800 930
V 200 250 250 400 400 500 600 700 700 800 1000 1000 1200 7 CHAIN WHEEL OPERATOR
H 450 500 540 670 685 810 970 1155 1330 1500 1680 2100 2400 7 PNEUMATIC ACTUATOR
H1 500 570 620 780 810 980 1180 1420 1660 1880 2100 2650 3100
7 ELECTRIC ACTUATOR
SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600
L RF/BW 250 290 310 350 400 450 550 650 750 850 950 1150 1350 7 LIMIT SWITCHES
D 195 220 230 265 315 355 430 505 585 655 715 870 990 7 LOCKING / INTERLOCK
V 200 250 250 400 400 500 600 700 700 800 1000 1000 1200
H 450 500 540 670 685 810 970 1155 1330 1500 1680 2100 2400 7 PTFE SOFT SEATS
H1 500 570 620 780 810 980 1180 1420 1660 1880 2100 2650 3100 7 STEM PROTECTION
7 STEM EXTENSION
FIG. N. 1250 - GATE VALVES DIN PN 160 - Face to Face F8 7 LANTERN RING
SIZE DN 50 65 80 100 125 150 200 250 300 350 400 -- --
L RF/BW 300 360 390 450 525 600 750 900 1050 1200 1350 -- --
D 195 220 230 265 315 355 430 505 585 655 715 -- -- 7 LIVE LOADED PACKING
V 200 250 250 400 400 500 600 700 700 800 1000 -- -- 7 DRAIN PLUG
H 450 500 540 670 685 810 970 1155 1330 1500 1680 -- --
H1 500 570 620 780 810 980 1180 1420 1660 1880 2100 -- -- 7 BY PASS
7 BW ENDS
7 ANSI CONNECTIONS
63
VALVOSIDER
CRYOGENIC GATE VALVES
DIN PN 16 - 25 - 40 - 63 - 100
standard features
V ? Description EXTENDED BONNET
11
BOLTED BONNET
12
10
RISING STEM
20
9
RENEWABLE SEATS
16
8
? Design DIN 3352
15
DIN 3840
7
17 H1 - OPEN
W
19
H
6
? Flanges DIN 2501
21
14
DIN 2547
2
DIN 2526 FORM E
18 BW TO DIN 3239
13
4 DIN 3230 Part 3
3
? Rating DIN 2401
D
? Marking EN 19
L
CE - PED
DN 500 400 300 200 200 ? Certificates EN 10204 – 3.1 B
PN 16 25 40 63 100
PART NAME FH12xxEB FK12xxEB options

FLEXIBLE WEDGE FLEXIBLE WEDGE
1 Body 1.4552 1.4581 PTFE INSERT
2 Bonnet 1.4552 1.4581 RELIEF HOLE RELIEF HOLE
3 Seat ring surface X6CrNiTi18-10 (1) X5CrNiMo17-12-2 (1)
4 Wedge seat surfaces X6CrNiTi18-10 (2) X5CrNiMo17-12-2 (2)
5 Stem X6CrNiTi18-10 (3) X5CrNiMo17-12-2 (3)
6 Back seat (integral) 1.4552 1.4581
7 Gland X6CrNiTi18-10 (3) X5CrNiMo17-12-2 (3) FLOW DIRECTION FLOW DIRECTION
8 Gland flange X6CrNiTi18-10 X5CrNiMo17-12-2
9 Yoke sleeve MS58 (4) MS58 (4)
10 Yoke nut X6CrNiTi18-10 X5CrNiMo17-12-2
12 Handwheel nut X6CrNiTi18-10 X5CrNiMo17-12-2
13 Bolts A2-70 A2-70
14 Nuts A2-70 A2-70
15 Eye bolts A2-70 A2-70
16 Nuts A2-70 A2-70
17 Eye bolt pin A2-70 A2-70
19 Packing PTFE (6) PTFE (6)
20 Grease nipple 1.4404 1.4404 FULLY EXTRACTABLE COLD BOX
21 Extension X2CrNi19-11 X2CrNiMo17-12-2
64
CRYOGENIC GATE VALVES VALVOSIDER
DIN PN 16 - 25 - 40 - 63 - 100 MANUFACTURER OF VALVES
FIG. N. 1200EB - CRYOGENIC GATE VALVES DIN PN 16 - F5

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 270 280 300 325 350 400 450 500 550 600 650 700 800 -- -- -- -- -- --
D 165 185 200 220 250 285 340 405 460 520 580 640 715 840 -- -- -- -- -- --
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 -- -- -- -- -- --
W 200 200 300 300 300 300 300 300 300 300 300 300 300 300 -- -- -- -- -- --
H 600 630 800 820 910 920 1080 1350 1500 1700 1880 2050 2200 2600 -- -- -- -- -- --
H1 650 695 880 920 1020 1060 1280 1600 1840 2050 2280 2500 2750 3300 -- -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 270 280 300 325 350 400 450 500 550 600 650 700 800 -- -- -- -- -- --
D 165 185 200 235 270 300 360 425 485 555 620 670 730 845 -- -- -- -- -- --
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 -- -- -- -- -- --
W 200 200 300 300 300 300 300 300 300 300 300 300 300 300 -- -- -- -- -- --
H 600 630 800 820 910 1000 1200 1350 1500 1700 1880 2050 2200 2600 -- -- -- -- -- --
H1 650 695 880 920 1020 1140 1400 1600 1840 2050 2280 2500 2750 3300 -- -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 290 310 350 400 450 550 650 750 850 950 1050 1150 1350 -- -- -- -- -- --
D 165 185 200 235 270 300 375 450 515 580 660 685 755 890 -- -- -- -- -- --
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 -- -- -- -- -- --
W 200 200 300 300 300 300 300 300 300 300 300 300 300 300 -- -- -- -- -- --
H 600 630 800 820 910 1000 1200 1350 1500 1700 1880 2050 2200 2600 -- -- -- -- -- --
H1 650 695 880 920 1020 1140 1400 1600 1840 2050 2280 2500 2750 3300 -- -- -- -- -- --
FIG. N. 1230EB - CRYOGENIC GATE VALVES DIN PN 63 - F7 features on request

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600
D 180 205 215 250 295 345 415 470 530 600 670 800 930 7 CHAIN WHEEL OPERATOR
V 200 250 250 400 400 500 600 700 700 800 1000 1000 1200
W 200 200 300 300 300 300 300 300 300 300 300 300 300
H 650 700 840 970 985 1110 1270 1455 1630 1800 1980 2400 2700 7 HYDRAULIC ACTUATOR
H1 700 770 920 1080 1110 1280 1480 1720 1960 2180 2400 2950 3400 7 ELECTRIC ACTUATOR
7 LIMIT SWITCHES
SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600
L RF/BW 250 290 310 350 400 450 550 650 750 850 950 1150 1350
D 195 220 230 265 315 355 430 505 585 655 715 870 990 7 PTFE SOFT SEATS
V 200 250 250 400 400 500 600 700 700 800 1000 1000 1200 7 STEM PROTECTION
W 200 200 300 300 300 300 300 300 300 300 300 300 300
7 STEM EXTENSION
H 650 700 840 970 985 1110 1270 1455 1630 1800 1980 2400 2700
H1 700 770 920 1080 1110 1280 1480 1720 1960 2180 2400 2950 3400 7 LANTERN RING
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 ANSI CONNECTIONS
65
VALVOSIDER GATE VALVES - BELLOW SEAL
MANUFACTURER OF VALVES DIN PN 16 - 25 - 40 - 63 - 100
standard features
V
? Description EXTENDED BODY
12 BOLTED BONNET
10
20 RISING STEM
24
16 RENEWABLE SEATS
8 BELLOW SEAL
7
15
17 ? Design DIN 3352
19 H1 - OPEN
DIN 3840
2
6
18 ? Face to face DIN 3202
H
14
13
23 ? Flanges DIN 2501
22
21 DIN 2547
DIN 2526 FORM E
BW TO DIN 3239

13 DIN 3230 Part 3
14
18
5 ? Rating DIN 2401
D
4
3
1 ? Marking EN 19
CE - PED
L
PN 16 25 40 63 100
PART NAM E A12xxSO C12xxSO FH12xxSO FK12xxSO

1 Body 1.0619 1.7365 1.4552 1.4581
2 Bonnet 1.0619 1.7365 1.4552 1.4581
9 Yoke sleeve MS58 (4)
11 Handwheel Steel
14 Nuts C35 24CrMo5 A2-70 A2-70
16 Nuts C35 24CrMo5 A2-70 A2-70
21 Bellow X6CrNiTi18-10 X6CrNiTi18-10 X6CrNiTi18-10 X6CrNiTi18-10
22 Extension 1.0460 1.7363 X6CrNiNb18-10 X2CrNiMo17-12-2
23 Bellow flange X6CrNiTi18-10
24 No rot. Device X20Cr13 X20Cr13 X6CrNiTi18-10 X5CrNiMo17-12-2
66
GATE VALVES - BELLOW SEAL VALVOSIDER
FIG. N. 1200SO - BELLOW GATE VALVES DIN PN 16 - F5

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 270 280 300 325 350 400 450 500 550 600 650 700 800 -- -- -- -- -- --
D 165 185 200 220 250 285 340 405 460 520 580 640 715 840 -- -- -- -- -- --
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 -- -- -- -- -- --
H 610 675 820 940 1160 1530 1960 2530 2600 2980 3170 2550 4050 4650 -- -- -- -- -- --
H1 660 740 900 1040 1290 1680 2160 2600 2900 3350 3570 4000 4550 5250 -- -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 270 280 300 325 350 400 450 500 550 600 650 700 800 -- -- -- -- -- --
D 165 185 200 235 270 300 360 425 485 555 620 670 730 845 -- -- -- -- -- --
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 -- -- -- -- -- --
H 610 675 820 940 1160 1530 1960 2530 2600 2980 3170 2550 4050 4650 -- -- -- -- -- --
H1 660 740 900 1040 1290 1680 2160 2600 2900 3350 3570 4000 4550 5250 -- -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400
L RF/BW 250 290 310 350 400 450 550 650 750 850 950 1050 1150 1350 -- -- -- -- -- --
D 165 185 200 235 270 300 375 450 515 580 660 685 755 890 -- -- -- -- -- --
V 200 200 225 250 280 300 400 500 500 600 600 600 600 600 -- -- -- -- -- --
H 600 685 765 920 1070 1315 1700 2035 2395 2760 3135 3600 4080 4795 -- -- -- -- -- --
H1 650 750 840 1020 1200 1465 1900 2285 2700 3110 4535 4050 4580 5350 -- -- -- -- -- --
FIG. N. 1230SO - BELLOW GATE VALVES DIN PN 63 - F7 features on request

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 7 TOP FLANGE TO ISO 5210
D 180 205 215 250 295 345 415 470 530 600 670 800 930 7 CHAIN WHEEL OPERATOR
V 200 250 250 400 400 500 600 700 700 800 1000 1000 1200
H 650 685 805 905 1070 1360 1720 2120 2500 -- -- -- --
H1 700 750 880 1010 1200 1510 1920 2370 2800 -- -- -- --
7 ELECTRIC ACTUATOR
FIG. N. 1240SO - BELLOW GATE VALVES DIN PN 100 - F7 7 LIMIT SWITCHES
SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600
L RF/BW 250 290 310 350 400 450 550 650 750 850 950 1150 1350
D 195 220 230 265 315 355 430 505 585 655 715 870 990 7 PTFE SOFT SEATS
V 200 250 250 400 400 500 600 700 700 800 1000 1000 1200 7 STEM PROTECTION
H 650 685 805 905 1070 1360 1720 2120 2500 -- -- -- -- 7 STEM EXTENSION
H1 700 750 880 1010 1200 1510 1920 2370 2800 -- -- -- --
7 LANTERN RING
7 DRAIN PLUG
7 BY PASS
7 BW ENDS
7 ANSI CONNECTIONS
67
VALVOSIDER
PRESSURE SEAL GATE VALVES
DIN PN 100 - 160 - 250 - 320 - 420
standard features
12
V ? Description ROUND BODY
11 PRESSURE SEAL BONNET
10 RISING STEM
13 WELDED IN SEATS
14
FLEXIBLE WEDGE
8
? Design DIN 3352
H1 - OPEN
7
DIN 3840
19
25
? Face to face
H
DIN 3202
15
23
? Flanges DIN 2501
22 DIN 2547
2 DIN 2526 FORM E
24 BW TO DIN 3239
16
18 DIN 3230 Part 3
6
5 ? Rating DIN 2401
4
3 ? Marking EN 19
L
1 CE - PED
PN 100 160 250 320 420
PART NAME AP2x IP2x MP2x WCP2x FKP2x

1 Body 1.0619 1.5419 1.7357 1.7379 1.4581
2 Bonnet 1.0619 1.5419 1.7357 1.7379 1.4581
3 Ring - seat surface 1.0160 + HF (1) 1.0160 + HF (1) 1.0460 + HF (1) 1.0160 + HF (1) 1.4401 + HF(1)
4 Wedge - seat surfaces 1.0619 + HF (1) 1.5419 + HF (1) 1.7357 + HF (1) 1.7380 + HF (1) 1.4581 + HF (1)
5 Stem X20Cr13 (3) X20Cr13 (3) X20Cr13 (3) X20Cr13 (3) 1.4401 (3)
7 Gland X20Cr13 (3) X20Cr13 (3) X20Cr13 (3) X20Cr13 (3) 1.4401 (3)
8 Gland flange 1.0460 1.4401 1.4401 1.4401 1.4401
9 Yoke sleeve GGG50 (4)
10 Yoke nut 1.0460 1.0460 1.0460 1.0460 1.4401
11 Handwheel Steel
12 Handwheel nut 1.0460’
13 Bolts CK35 21CrMoV57 21CrMoV57 21CrMoV57 A2-70
14 Nuts C35 24CrMo5 24CrMo5 24CrMo5 A2-70
15 Retainer flange 1.0160 1.0160 1.0460 1.0160 1.4401
16 Retainer ring X20Cr13 X20Cr13 X20Cr13 X20Cr13 1.4401
17 Spacer ring X20Cr13 X20Cr13 X20Cr13 X20Cr13 1.4401
18 Gasket S. S. reinforced graphite (5)
21 Yoke 1.0619 1.5419 1.7357 1.7380 1.4581
22 Segmented support ring X20Cr13 X20Cr13 X20Cr13 X20Cr13 1.4401
23 Yoke / body bolt CK35 21CrMoV57 21CrMoV57 21CrMoV57 A2-70
24 Yoke / body nut C35 24CrMo5 24CrMo5 24CrMo5 A2-70
25 Bolt CK35 21CrMoV57 21CrMoV57 21CrMoV57 A2-70
(1) On request: faced with Stellite - Monel - Hastelloy - other materials (4) On request: Other materials
68
PRESSURE SEAL GATE VALVES VALVOSIDER
FIG. P24 - PRESSURE SEAL GATE VALVES DIN PN 100 - F8

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
V 200 200 250 300 400 400 500 G .O . G .O . G .O . G .O . G .O . --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 560 670 700 720 1010 1040 1240 1610 1820 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
V 200 200 250 300 400 400 500 G .O . G .O . G .O . G .O . G .O . --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 560 670 700 720 1010 1040 1240 1610 1820 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
V 200 200 250 300 400 400 500 G .O . G .O . G .O . G .O . G .O . --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 560 670 700 720 1010 1040 1240 1610 1820 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
V 200 200 250 300 400 400 500 G .O . G .O . G .O . G .O . G .O . --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 560 670 700 720 1010 1040 1240 1610 1820 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
V 200 200 250 300 400 400 500 G .O . G .O . G .O . G .O . G .O . --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 560 670 700 720 1010 1040 1240 1610 1820 -- -- -- --
features on request
7 TOP FLANGE TO ISO 5210 7 TWO PIECE BODY GUIDED WEDGE
7 GEAR OPERATOR 7 STEM PROTECTION
7 CHAIN WHEEL OPERATOR 7 STEM EXTENSION
7 PNEUMATIC OR HYDRAULIC ACTUATOR 7 LANTERN RING
7 ELECTRIC ACTUATOR 7 EXTENDED STUFFING BOX
7 POSITION INDICATOR 7 LIVE LOADED PACKING
7 LIMIT SWITCHES 7 DRAIN PLUG
7 LOCKING / INTERLOCK SYSTEM 7 BY PASS
7 PTFE SOFT SEATS 7 FLANGED ENDS
7 PARALLEL WEDGE 7 ANSI CONNECTIONS
69
VALVOSIDER
MANUFACTURER OF VALVES DIN GLOBE VALVES
DESCRIPTION OF A TYPICAL GLOBE VALVE - BELLOW SEAL
HANDWHEEL NUT
HANDWHEEL
YOKE NUT
YOKE SLEEVE
GREASE NIPPLE
STEM
NO ROT. DEVICE
NUTS
EYE BOLTS
GLAND
EYE BOLT PIN
NUTS
BONNET
PACKING
BOLTS
GASKET
BELLOW FLANGE
BACK SEAT
BELLOW
DISC
SEAT RING
BODY
70
VALVOSIDER
MANUFACTURER OF VALVES DIN GLOBE VALVES 7
TYPE CLASS SIZES FIG. N. TYPE CLASS SIZES FIG. N.
GLOBE VALVES PN16/25 15 - 600 1800 GLOBE VALVES PN16 15 - 600 1401
BELLOW SEAL BOLTED BONNET
PN 25/40 15 - 600 1670 PN 25/40 15 - 600 1430
PN 63 15 - 600 1560SO PN 63 15 - 600 1560
PN 100 15 - 300 1570SO PN 100 15 - 300 1570
PN 160 15 - 300 1580

page 78 page 72
GLOBE VALVES 90° ANGLE PN16 15 - 600 1810 GLOBE VALVES 90° ANGLE PN16 15 - 600 1410
PN 25/40 15 - 600 1680 PN 25/40 15 - 600 1440
PN 63 15 - 600 1560ASO PN 63 15 - 600 1560A
PN 100 15 - 300 1570ASO PN 100 15 - 300 1570A
page 80 page 74
GLOBE VALVES Y TYPE PN 40 50 - 600 1432SO GLOBE VALVES Y TYPE PN16 15 - 600 1403
PN 63 50 - 600 1560YSO PN 25/40 15 - 600 1432
PN 100 50 - 300 1570YSO PN 63 15 - 600 1560Y
PN 100 15 - 300 1570Y
page 82 page 76
GLOBE VALVES Y TYPE PN 100 50 - 600 P182 GLOBE VALVES PN 100 50 - 600 P162
PN 160 50 - 600 P183 PN 160 50 - 600 P163
PN 250 50 - 600 P184 PN 250 50 - 600 P164
PN 320 50 - 600 P185 PN 320 50 - 600 P165
PN 420 50 - 600 P186 page 86

PN 420 50 - 600 P166
page 88
GLOBE VALVES PN 25/40 15 - 600 1430EB
CRYOGENIC
PN 63 15 - 600 1560EB
PN 100 15 - 300 1570EB
page 84
71
VALVOSIDER GLOBE VALVES BOLTED BONNET
standard features
V

10 RISING STEM
9 RISING HANDWHEEL
8 LOOSE DISC
5
H1 - OPEN
14 DIN 3840
7
H
13
2 DIN 2547
12 DIN 2526 FORM E
17 BW TO DIN 3239
6
D

3 DIN 3230 Part 3
1
? Rating DIN 2401
L
? Marking EN 19
DN 80 100 125 150 200 250 300 350 400 450 500 600 CE - PED
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
If higher, valve to be mounted with gear operator or with pressure above
the disc and fitted with external or internal bypass. ? Certificates EN 10204 – 3.1 B
PART NAME G1401 - (CAST IRON) A1430-A1560 A1570-A1580 FK1430-FK1560-FK1570-FK1580

1 Body EN-GJL 250 1.0619 (A) 1.4581
2 Bonnet EN-GJL 250 1.0619 (B) 1.4581
3 Seat surface X20Cr13 (1) X20Cr13 (1) overlay X5CrNiMo17-12-2 (1)
4 Disc seat surface X20Cr13 (1) X20Cr13 (1) X5CrNiMo17-12-2 (1)
5 Stem X20Cr13 (2) X20Cr13 (2) X5CrNiMo17-12-2 (2)
6 Back seat (integral) EN-GJL 250 1.0619 (B) 1.4581
7 Gland 1.0460 1.0460 X5CrNiMo17-12-2
8 Yoke sleeve N/A MS58 (3) MS58 (3)
9 Handwheel Steel Steel Steel
10 Plate 1.0460 1.0460 1.0460
11 Handwheel nut 1.0460 1.0460 X5CrNiMo17-12-2
12 Bolts CK35 CK35 A2-70
13 Nuts C35 C35 A2-70
14 Eye bolts CK35 CK35 A2-70
15 Nuts C35 C35 A2-70
16 Eye bolt pin CK35 CK35 A2-70
17 Gasket S. S. reinforced graphite (4) S. S. reinforced graphite (4) S. S. reinforced graphite (4)
18 Packing Graphite rings & wiper rings (4) Graphite rings & wiper rings (4) Graphite rings & wiper rings (4)
(1) On request: faced with Stellite - Monel - Hastelloy - other materials (A) For PN < 40 and DN < 50 = 1.0460
(2) On request: 17 Cr - Monel - Hastelloy - other materials For PN > 63 and DN < 25 = 1.0460
(3) On request: GGG50 (B) For PN < 40 and DN < 80 = 1.0460
(4) On request: PTFE - other materials For PN > 63 and DN < 40 = 1.0460
72
GLOBE VALVES - BOLTED BONNET
DIN PN 16 - 25 - 40 - 63 - 100 - 160
VALVOSIDER
FIG. 1401 - GLOBE VALVES BOLTED BONNET DIN PN 16 - CAST IRON - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
V 100 100 125 125 150 150 200 200 225 225 300 300 400 500 500 600 600 700 700 800
H 160 165 190 200 225 260 280 320 375 415 460 550 570 750 900 1040 1290 1400 1600
H1 164 170 197 208 235 273 297 340 400 447 498 594 620 813 975 1128 1390 1513 1725
FIG.1430 - GLOBE VALVES BOLTED BONNET DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
V 100 100 125 125 150 200 200
200 200
200 250
225 250
225 500
500 500
500 600
600 600
600 700
700 700
700 700
700 700
700 700
700 800
800
H 160 165 190 200 225 260 280 320 375 415 460 550 570 750 900 1040 1290 1400 1600 --
H1 164 170 197 208 235 273 297 340 400 447 498 594 620 813 975 1128 1390 1513 1725 --
FIG. 1560 - GLOBE VALVES BOLTED BONNET DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 1400 1600 --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
V 200 200 200 225 225 250 300 400 400 500 600 600 600 700 700 800 800 1000 1200 --
H 250 310 310 330 350 380 410 460 490 550 610 700 750 800 930 -- -- -- -- --
H1 254 315 317 338 360 393 427 480 515 582 648 744 800 863 1005 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 200 200 200 225 225 250 300 400 400 500 700 700 700 700 700 -- -- -- -- --
H 250 310 310 330 350 400 480 510 580 600 630 720 780 830 970 -- -- -- -- --
H1 254 315 317 338 360 413 497 530 605 632 668 764 830 893 1045 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 200 200 200 250 250 250 400 500 600 600 700 700 700 700 800 -- -- -- -- --
H 250 310 310 355 355 400 -- -- -- -- -- -- -- -- -- -- -- -- -- --
H1 254 315 317 363 365 413 -- -- -- -- -- -- -- -- -- -- -- -- -- --
features on request
7 TOP FLANGE TO ISO 5210 7 PTFE SOFT SEATS
7 GEAR OPERATOR 7 STEM PROTECTION / EXTENSION
7 CHAIN WHEEL OPERATOR 7 REGULATING DISC
7 PNEUMATIC ACTUATOR 7 DOUBLE STAGE DISC
7 HYDRAULIC ACTUATOR 7 STOP CHECK DISC
7 LIMIT SWITCHES 7 BW ENDS
7 LOCKING / INTERLOCK SYSTEM 7 ANSI CONNECTIONS
73
VALVOSIDER GLOBE VALVES 90° ANGLE
V standard features

11 RISING STEM
10 RISING HANDWHEEL
9
LOOSE DISC
8
H1 - OPEN
15
7 ? Design DIN 3352
H
14 DIN 3840
16
12
2
18
? Flanges DIN 2501
17 DIN 2547
6 DIN 2526 FORM E
D
5 BW TO DIN 3239
4
3
L
1
DIN 3230 Part 3
D ? Rating DIN 2401

L
? Marking EN 19
DN 80 100 125 150 200 250 300 350 400 450 500 600 CE - PED
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
PART NAME G1410 - (CAST IRON) A1440 - A1560A - A1570A FK1440 - FK1560A - FK1570A
1 Body EN-GJL 250 1.0619 (A) 1.4581
2 Bonnet EN-GJL 250 1.0619 (B) 1.4581
7 Gland 1.0460 1.0460 X5CrNiMo17-12-2
10 Plate 1.0460 1.0460 1.0460
13 Nuts C35 C35 A2-70
15 Nuts C35 C35 A2-70
74
GLOBE VALVES - 90° ANGLE
DIN PN 16 - 25 - 40 - 63 - 100
VALVOSIDER
FIG. 1410 - GLOBE VALVES - 90° ANGLE - DIN PN 16 - CAST IRON - F32
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375 425 475 500 575 675
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
V 100 100 125 125 150 150 200 200 225 225 300 300 400 500 500 600 600 700 700 800
H 160 165 190 200 225 260 280 320 375 415 460 550 570 750 900 1040 1290 1400 1600
H1 164 170 197 208 235 273 297 340 400 447 498 594 620 813 975 1128 1390 1513 1725
FIG. 1440 - GLOBE VALVES - 90° ANGLE - DIN PN 25 / 40 - F32

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375 425 475 500 575 675
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
V 100 100 125 125 150 200 200 200 250 250 500 500 600 600 700 700 700 700 700 800
H 160 165 190 200 225 260 280 320 375 415 460 550 570 750 900 1040 1290 1400 1600 --
H1 164 170 197 208 235 273 297 340 400 447 498 594 620 813 975 1128 1390 1513 1725 --
FIG. 1560A - GLOBE VALVES - 90° ANGLE - DIN PN 63 - F33

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 105 105 115 130 130 150 170 190 215 250 275 300 325 390 450 515 575 700 -- --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
V 200 200 200 220 220 250 225 400 400 500 600 600 600 700 700 800 800 1000 1200 --
H 250 310 310 330 350 380 410 460 490 550 610 700 750 800 930 -- -- -- -- --
H1 254 315 317 338 360 393 427 480 515 582 648 744 800 863 1005 -- -- -- -- --
FIG. 1570A - GLOBE VALVES - 90° ANGLE - DIN PN100 - F33

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 105 105 115 130 130 150 170 190 215 250 275 300 325 390 450 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 200 200 200 225 225 250 300 400 400 500 700 700 700 700 700 -- -- -- -- --
H 250 310 310 330 350 400 480 510 580 600 630 720 780 830 970 -- -- -- -- --
H1 254 315 317 338 360 413 497 530 605 632 668 764 830 893 1045 -- -- -- -- --
features on request
75
VALVOSIDER GLOBE VALVES ‘Y’ TYPE
standard features
11 V
10 RISING STEM
8 RISING HANDWHEEL
LOOSE DISC
15
14
? Design DIN 3352
7
H1 - OPEN
DIN 3840
16
H
2
17 DIN 2547
DIN 2526 FORM E
18
BW TO DIN 3239
6
D

4 DIN 3230 Part 3
3
1 ? Rating DIN 2401
L
? Marking EN 19
DN 80 100 125 150 200 250 300 350 400 450 500 600
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
? Certificates
the disc and fitted with external or internal bypass. EN 10204 – 3.1 B
PART NAME G1403 - (CAST IRON) A1432 - A1560Y - A1570Y FK1432 - FK1560Y - FK1570Y
1 Body EN-GJL 250 1.0619 (A) 1.4581
2 Bonnet EN-GJL 250 1.0619 (B) 1.4581
7 Gland 1.0460 1.0460 X5CrNiMo17-12-2
10 Plate 1.0460 1.0460 1.0460
13 Nuts C35 C35 A2-70
15 Nuts C35 C35 A2-70
76
GLOBE VALVES - ‘Y’ TYPE
DIN PN 16 - 25 - 40 - 63 - 100
VALVOSIDER
FIG. 1403 - GLOBE VALVES - Y TYPE - DIN PN 16 - CAST IRON - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
V 100 100 125 125 150 150 200 200 225 225 300 300 400 500 500 600 600 700 700 800
H 180 190 210 250 290 340 380 450 500 570 650 770 840 950 1100 1250 1500 1650 1850
H1 184 195 217 258 300 353 397 470 525 602 688 814 890 1013 1175 1338 1600 1763 1975
FIG. 1432 - GLOBE VALVES - Y TYPE - DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
V 100 100 125 125 150 200 200 200 250 250 500 500 600 600 700 700 700 700 700 800
H 180 190 210 250 290 340 380 450 500 570 650 770 840 950 1100 1250 1500 1650 1850 --
H1 184 195 217 258 300 353 397 470 525 602 688 814 890 1013 1175 1338 1600 1763 1975 --
FIG. 1560Y - GLOBE VALVES - Y TYPE - DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 1400 1600 --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
V 200 200 200 220 220 250 225 400 400 500 600 600 600 700 700 800 800 1000 1200 --
H 272 338 332 385 422 468 520 603 628 721 819 942 1047 1020 1150 -- -- -- -- --
H1 276 343 339 393 432 481 537 623 653 753 857 986 1097 1083 1225 -- -- -- -- --
FIG. 1570Y - GLOBE VALVES - Y TYPE - DIN PN 100 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 200 200 200 225 225 250 300 400 400 500 700 700 700 700 700 -- -- -- -- --
H 275 341 335 391 430 497 601 668 732 789 860 987 1107 1072 1212 -- -- -- -- --
H1 279 346 342 399 440 510 618 688 757 821 898 1031 1157 1135 1287 -- -- -- -- --
features on request
77
VALVOSIDER GLOBE VALVES - BELLOW SEAL
standard features
12
V
9 RISING STEM
5
8
15 DIN 3840
H1 - OPEN
7
H
14
20 DIN 2547
13 DIN 2526 FORM E
19 BW TO DIN 3239
D
18
21 DIN 3230 Part 3
4
3
L ? Rating DIN 2401
1
? Marking EN 19
DN 80 100 125 150 200 250 300 350 400 450 500 600
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
? Certificates
PART NAM E S1800 - (NODULAR IRON) A1670 - A1560SO - A1570SO FK1670 - FK1560SO - FK1570SO
1 Body EN-G JS-400-18-LT 1.0619 (A) 1.4581
2 Bonnet EN-G JS-400-18-LT 1.0619 (B) 1.4581
3 Seat surface X20Cr13 (1) X20Cr13 (1) overlay 1.4581 (1)
6 Back seat (integral) EN-G JS-400-18-LT 1.0619 (B) 1.4581
7 G land 1.0460 1.0460 X5CrNiMo17-12-2
8 No rot. Device X20Cr13 X20Cr13 X5CrNiMo17-12-2
9 Y oke sleeve N/A MS58 (3) MS58 (3)
10 Y oke nut 1.0460 1.0460 X5CrNiMo17-12-2
14 Nuts C35 C35 A2-70
16 Nuts C35 C35 A2-70
18 Bellow flange X6CrNiT i18-10 X6CrNiT i18-10 X6CrNiT i18-10
19 G asket S. S. reinforced graphite (4) S. S. reinforced graphite (4) S. S. reinforced graphite (4)
20 Packing G raphite rings & wiper rings (4) G raphite rings & wiper rings (4) G raphite rings & wiper rings (4)
21 Bellow X6CrNiT i18-10 X6CrNiT i18-10 X6CrNiT i18-10
22 G rease nipple Steel Steel Steel
78
GLOBE VALVES BELLOW SEAL VALVOSIDER
FIG. 1800 - GLOBE VALVES BELLOW SEAL - DIN PN 16 / 25 - NODULAR IRON - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
V 100 100 125 125 150 150 200 200 225 225 300 300 400 500 500 600 600 700 700 800
H 180 190 210 250 290 340 380 450 500 570 650 770 840 950 1100 1250 1500 1650 1850 --
H1 184 195 217 258 300 353 397 470 525 602 688 814 890 1013 1175 1338 1600 1763 1975 --
FIG. 1670 - GLOBE VALVES BELLOW SEAL - DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
V 100 100 125 125 150 200 200 200 250 250 500 500 600 600 700 700 700 700 700 800
H 210 220 220 220 240 270 310 350 400 460 510 600 630 810 950 1100 1350 1460 1660 --
H1 214 225 227 228 250 283 327 370 425 492 548 594 680 813 925 1088 1300 1513 1725 --
FIG. 1560SO - GLOBE VALVES BELLOW SEAL - DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 1400 1600 --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
V 200 200 200 220 220 250 225 400 400 500 600 600 600 700 700 800 800 1000 1200 --
H 300 360 360 380 400 430 460 510 540 610 670 760 810 860 990 -- -- -- -- --
H1 304 365 367 388 410 443 477 530 565 642 708 804 860 923 1065 -- -- -- -- --
FIG. 1570SO - GLOBE VALVES BELLOW SEAL - DIN PN 100 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 200 200 200 225 225 250 300 400 400 500 700 700 700 700 700 -- -- -- -- --
H 300 360 360 380 400 450 530 560 630 660 690 780 840 890 1030 -- -- -- -- --
H1 304 365 367 388 410 463 547 580 655 692 728 824 890 953 1105 -- -- -- -- --
features on request
79
VALVOSIDER GLOBE VALVES - BELLOW SEAL 90° ANGLE
standard features
V
10
RISING STEM
9
22
5
8
H1 - OPEN
? Design DIN 3352
16
DIN 3840
H
15
7
17
14
13 DIN 2547
DIN 2526 FORM E
D
19
20 BW TO DIN 3239
18
? Testing
L
6 DIN 3352 Part 1

21 DIN 3230 Part 3
4
3 D ? Rating DIN 2401
1 L
? Marking EN 19
DN 80 100 125 150 200 250 300 350 400 450 500 600
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
PART NAM E S1810 - (NODULAR IRON) A1680-A1560ASO-A1570ASO FK1680-FK1560ASO-FK1570ASO

1 Body EN-G JS-400-18-LT 1.0619 (A) 1.4581
2 Bonnet EN-G JS-400-18-LT 1.0619 (B) 1.4581
6 Back seat (integral) EN-G JS-400-18-LT 1.0619 (B) 1.4581
7 G land 1.0460 1.0460 X5CrNiMo17-12-2
8 No rot. Device X20Cr13 X20Cr13 X5CrNiMo17-12-2
9 Y oke sleeve N/A MS58 (3) MS58 (3)
10 Y oke nut 1.0460 1.0460 X5CrNiMo17-12-2
14 Nuts C35 C35 A2-70
16 Nuts C35 C35 A2-70
18 Bellow flange X6CrNiT i18-10 X6CrNiT i18-10 X6CrNiT i18-10
19 G asket S. S. reinforced graphite (4) S. S. reinforced graphite (4) S. S. reinforced graphite (4)
20 Packing G raphite rings & wiper rings (4) G raphite rings & wiper rings (4) G raphite rings & wiper rings (4)
21 Bellow X6CrNiT i18-10 X6CrNiT i18-10 X6CrNiT i18-10
22 G rease nipple Steel Steel Steel
80
GLOBE VALVES BELLOW SEAL - 90° ANGLE
DIN PN 16 - 25 - 40 - 63 - 100 VALVOSIDER
FIG. 1810 - GLOBE VALVES BELLOW SEAL - 90° ANGLE - DIN PN 16 / 25 - NODULAR IRON - F32
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375 425 475 500 575 675
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
V 100 100 125 125 150 150 200 200 225 225 300 300 400 500 500 600 600 700 700 800
H 180 190 210 250 290 340 380 450 500 570 650 770 840 950 1100 1250 1500 1650 1850 --
H1 184 195 217 258 300 353 397 470 525 602 688 814 890 1013 1175 1338 1600 1763 1975 --
FIG. 1680 - GLOBE VALVES BELLOW SEAL - 90° ANGLE - DIN PN 25 / 40 - F32
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375 425 475 500 575 675
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
V 100 100 125 125 150 200 200 200 250 250 500 500 600 600 700 700 700 700 700 800
H 210 220 220 220 240 270 310 350 400 460 510 600 630 810 950 1100 1350 1460 1660 --
H1 214 225 227 228 250 283 327 370 425 492 548 594 680 813 925 1088 1300 1513 1725 --
FIG. 1560ASO - GLOBE VALVES BELLOW SEAL - 90° ANGLE - DIN PN 63 - F33
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 105 105 115 130 130 150 170 190 215 250 275 300 325 390 450 515 575 700 -- --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
V 200 200 200 220 220 250 225 400 400 500 600 600 600 700 700 800 800 1000 1200 --
H 300 360 360 380 400 430 460 510 540 610 670 760 810 860 990 -- -- -- -- --
H1 304 365 367 388 410 443 477 530 565 642 708 804 860 923 1065 -- -- -- -- --
FIG. 1570ASO - GLOBE VALVES BELLOW SEAL - 90° ANGLE - DIN PN 100 - F33
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 105 105 115 130 130 150 170 190 215 250 275 300 325 390 450 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 200 200 200 225 225 250 300 400 400 500 700 700 700 700 700 -- -- -- -- --
H 300 360 360 380 400 450 530 560 630 660 690 780 840 890 1030 -- -- -- -- --
H1 304 365 367 388 410 463 547 580 655 692 728 824 890 953 1105 -- -- -- -- --
features on request
81
VALVOSIDER GLOBE VALVES BELLOW SEAL ‘Y’ TYPE
MANUFACTURER OF VALVES DIN PN 25 - 40 - 63 - 100
standard features

12
11
10
RISING STEM
22
5
8 DIN 3840
H1 - OPEN
7
15
H
14
17
13 DIN 2547
18 DIN 2526 FORM E
18 BW TO DIN 3239
D
20
6
21
4
DIN 3230 Part 3
3 L
1 ? Rating DIN 2401
? Marking EN 19
DN 80 100 125 150 200 250 300 350 400 450 500 600
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
? Certificates
PART NAM E A1432SO - A1560Y SO - A1570Y SO FK1432SO - FK1560Y SO - FK1570Y SO

1 Body 1.0619 (A) 1.4581
2 Bonnet 1.0619 (B) 1.4581
3 Seat surface X20Cr13 (1) X5CrNiMo17-12-2 (1)
4 Disc seat surface X20Cr13 (1) X5CrNiMo17-12-2 (1)
5 Stem X20Cr13 (2) X5CrNiMo17-12-2 (2)
6 Back seat (integral) 1.0619 (B) 1.4581
7 G land 1.0460 X5CrNiMo17-12-2
8 No rot. Device X20Cr13 X5CrNiMo17-12-2
9 Y oke sleeve MS58 (3) MS58 (3)
10 Y oke nut 1.0460 X5CrNiMo17-12-2
12 Handwheel nut 1.0460 X5CrNiMo17-12-2
13 Bolts CK35 A2-70
14 Nuts C35 A2-70
15 Eye bolts CK35 A2-70
16 Nuts C35 A2-70
17 Eye bolt pin CK35 A2-70
18 Bellow flange X6CrNiT i18-10 X6CrNiT i18-10
19 G asket S. S. reinforced graphite (4) S. S. reinforced graphite (4)
20 Packing G raphite rings & wiper rings (4) G raphite rings & wiper rings (4)
21 Bellow X6CrNiT i18-10 X6CrNiT i18-10
22 G rease nipple Steel Steel
82
GLOBE VALVES BELLOW SEAL - ‘Y’ TYPE
DIN PN 25 - 40 - 63 - 100 VALVOSIDER
FIG. 1432SO - GLOBE VALVES BELLOW SEAL - Y TYPE - DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
V 100 100 125 125 150 200 200 200 250 250 500 500 600 600 700 700 700 700 700 800
H 230 240 260 300 340 390 430 500 550 630 710 830 900 1010 1160 1310 1560 1710 1910 --
H1 234 245 267 308 350 403 447 520 575 662 748 874 950 1073 1235 1398 1660 1823 2035 --
FIG. 1560YSO - GLOBE VALVES BELLOW SEAL - Y TYPE - DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 1400 1600 --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
V 200 200 200 220 220 250 225 400 400 500 600 600 600 700 700 800 800 1000 1200 --
H 322 388 382 435 472 518 570 653 678 781 879 1002 1107 1080 1210 -- -- -- -- --
H1 326 393 389 443 482 531 587 673 703 813 917 1046 1157 1143 1285 -- -- -- -- --
FIG. 1570YSO - GLOBE VALVES BELLOW SEAL - Y TYPE - DIN PN 100 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 150 150 150 200 200 200 225 250 300 400 500 500 600 700 700 -- -- -- -- --
H 325 391 385 441 480 547 651 718 782 849 920 1047 1167 1132 1272 -- -- -- -- --
H1 329 396 392 449 490 560 668 738 807 881 958 1091 1217 1195 1347 -- -- -- -- --
features on request
83
VALVOSIDER GLOBE VALVES - CRYOGENIC
MANUFACTURER OF VALVES DIN PN 25 - 40 - 63 - 100
V standard features
11 EXTENDED BONNET
9 RISING STEM
8 RISING HANDWHEEL
15 LOOSING DISC
14
? Design DIN 3352
H1 - OPEN
7
DIN 3840
16
? Face to face
H
2 DIN 3202
18
W

19 DIN 2547
5 DIN 2526 FORM E
13 BW TO DIN 3239
12
17
DIN 3230 Part 3
4
D
3 ? Rating DIN 2401

1
L
? Marking EN 19
CE - PED
DN 80 100 125 150 200 250 300 350 400 450 500 600
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8
2,2
the disc and fitted with external or internal bypass.
FH1430EB - FH1560EB - FH1570EB

options
PART NAME
1 Body 1.4552
2 Bonnet 1.4552
3 Seat (integral) 1.4552 (1)
4 Disc X5CrNiMo17-12-2 (1)
5 Stem X5CrNiMo17-12-2 (2)
6 Back seat (integral) 1.4552
7 Gland X5CrNiMo17-12-2
8 Yoke sleeve MS58 (3)
9 Handwheel Steel
10 Plate 1.0460
11 Handwheel nut X5CrNiMo17-12-2
12 Bolts A2-70
13 Nuts A2-70
14 Eye bolts A2-70
15 Nuts A2-70
16 Eye bolt pin A2-70
17 Gasket S. S. reinforced graphite (4)
Graphite rings & wiper rings (4) FULLY EXTRACTABLE COLD BOX
18 Packing
19 Extension X2CrNiMo17-12-2
(1) On request: faced with Stellite - Monel - Hastelloy - other materials (3) On request: GGG50
84
GLOBE VALVES - CRYOGENIC VALVOSIDER
DIN PN 25 - 40 - 63 - 100 MANUFACTURER OF VALVES
FIG. 1430EB - CRYOGENIC GLOBE VALVES - DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
V 100 100 125 125 150 200 200 200 250 250 500 500 600 600 700 700 700 700 700 800
W 200 200 200 200 200 200 200 300 300 300 300 300 300 300 300 300 300 300 300 300
H 565 570 595 605 630 665 685 825 880 920 1070 1160 1180 1360 1510 1650 1900 2010 2210 2750
H1 569 575 602 613 640 678 702 845 905 952 1108 1204 1230 1423 1585 1738 2000 2123 2335 --
FIG. 1560EB - CRYOGENIC GLOBE VALVES - DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 1400 1600 --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
V 200 200 200 220 220 250 225 400 400 500 600 600 600 700 700 800 800 1000 1200 --
W 200 200 200 200 200 200 200 300 300 300 300 300 300 300 300 300 300 300 300 --
H 655 715 715 735 755 785 815 965 995 1055 1220 1310 1360 1410 1540 -- -- -- -- --
H1 659 720 722 743 765 798 832 985 1020 1087 1258 1354 1410 1473 1615 -- -- -- -- --
FIG. 1570EB - CRYOGENIC GLOBE VALVES - DIN PN 100 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
V 200 200 200 225 225 250 300 400 400 500 700 700 700 700 700 -- -- -- -- --
W 200 200 200 200 200 200 200 300 300 300 300 300 300 300 300 -- -- -- -- --
H 655 715 715 735 755 805 885 1015 1085 1105 1240 1330 1390 1440 1580 -- -- -- -- --
H1 659 720 722 743 765 818 902 1035 1110 1137 1278 1374 1440 1503 1655 -- -- -- -- --
features on request
85
VALVOSIDER PRESSURE SEAL GLOBE VALVES
standard features
12
9
10
RISING STEM
20
21
14 WELDED IN SEATS
25 LOOSED DISC
8
? Design
H1 - OPEN
7 DIN 3352
19 DIN 3840
H
26
15
23
DIN 2547
24
DIN 2526 FORM E
16
17
BW TO DIN 3239
18
5 DIN 3230 Part 3
4
3 ? Rating DIN 2401
1 L
? Marking EN 19
CE - PED
DN 80 100 125 150 200 250 300 350 400 450 500 600
? Certificates
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
If higher, valve to be mounted with gear operator or with pressure above EN 10204 – 3.1 B
PAR T NAM E AP16x M P16x W C P16x

1 Body 1 .0 6 1 9 1 .7 3 5 7 1 .7 3 8 0
2 Bonnet 1 .0 6 1 9 1 .7 3 5 7 1 .7 3 8 0
3 R in g - s e a t s u r fa c e 1 .0 4 6 0 - H F (1 ) 1 .0 4 6 0 + H F (1 ) 1 .0 4 6 0 + H F (1 )
4 D is c - s e a t s u r fa c e 1 .0 6 1 9 - H F ( 1 ) 1 .7 3 5 7 + H F ( 1 ) 1 .7 3 8 0 + H F ( 1 )
5 S te m X 2 0 C r1 3 ( 3 ) X 2 0 C r1 3 ( 3 ) X 2 0 C r1 3 ( 3 )
6 B a c k s e a t (in te g r a l) O verlay S tellite ( 2 ) O verlay S tellite ( 2 ) O verlay S tellite ( 2 )
7 G la n d X 2 0 C r1 3 X 2 0 C r1 3 X 2 0 C r1 3
8 G la n d fla n g e 1 .0 4 6 0 X 2 0 C r1 3 X 2 0 C r1 3
9 Y o k e s le e v e G G G 5 0 (4 ) G G G 5 0 (4 ) G G G 5 0 (4 )
10 Y oke nut 1 .0 4 6 0 1 .0 4 6 0 1 .0 4 6 0
11 Handw heel S teel S teel S teel
12 Handw heel nut 1 .0 4 6 0 1 .0 4 6 0 1 .0 4 6 0
13 B o lts C K 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
14 N u ts C 35 2 4 C rM o5 2 4 C rM o5
15 R e ta in e r fla n g e 1 .0 4 6 0 1 .0 4 6 0 1 .0 4 6 0
16 R e ta in e r r in g X 2 0 C r1 3 X 2 0 C r1 3 X 2 0 C r1 3
17 S p a c e r r in g X 2 0 C r1 3 X 2 0 C r1 3 X 2 0 C r1 3
18 G asket S . S . rein f orc ed g rap h ite (4 ) S . S . rein f orc ed g rap h ite (4 ) S . S . rein f orc ed g rap h ite (4 )
19 P a c k in g G rap h ite rin g s an d w ip er rin g s G rap h ite rin g s an d w ip er rin g s G rap h ite rin g s an d w ip er rin g s
20 G r e a s e n ip p le S teel S teel S teel
21 Y oke 1 .0 6 1 9 1 .7 3 5 7 1 .7 3 8 0
22 S u p p o r t r in g 1 .0 4 6 0 X 2 0 C r1 3 X 2 0 C r1 3
23 Y o k e / b o d y b o lt C K 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
24 Y oke / body nut C 35 2 4 C rM o5 2 4 C rM o5
25 N o r o ta tio n d e v ic e C 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
26 B o lt C K 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
86
PRESSURE SEAL GLOBE VALVES VALVOSIDER
FIG. P162 - PRESSURE SEAL GLOBE VALVES DIN PN 100 - F8

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
V 200 200 250 300 400 G.O. G.O. G.O. G.O. G.O. G.O. G.O. --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
V 300 400 400 G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O. G.O. --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --
features on request
7 LIMIT SWITCHES 7 FLANGED ENDS
87
VALVOSIDER PRESSURE SEAL GLOBE VALVES - ‘Y’ TYPE
standard features
11
10 RISING STEM
21 V INTEGRAL BACKSEAT
25 WELDED IN SEATS
14 LOOSED DISC
8
13
? Design DIN 3352
7
H1 - OPEN
2
DIN 3840
H
19
15
24 DIN 2547
23 DIN 2526 FORM E
16 BW TO DIN 3239
17
6 DIN 3230 Part 3
5
4
3
? Rating DIN 2401
1 L
? Marking EN 19
CE - PED
DN 80 100 125 150 200 250 300 350 400 450 500 600
Δ p bar 85 60 35 21 14 9 6 5 4 3 2,8 2,2
If higher, valve to be mounted with gear operator or with pressure above ? Certificates EN 10204 – 3.1 B
PAR T NAM E AP18x W P18x W C P18x

1 Body 1 .0 6 1 9 1 .7 3 5 7 1 .7 3 8 0
2 Bonnet 1 .0 6 1 9 1 .7 3 5 7 1 .7 3 8 0
3 R in g - s e a t s u r fa c e 1 .0 4 6 0 - H F (1 ) 1 .0 4 6 0 + H F (1 ) 1 .0 4 6 0 + H F (1 )
4 D is c - s e a t s u r fa c e 1 .0 6 1 9 - H F ( 1 ) 1 .7 3 5 7 + H F ( 1 ) 1 .7 3 8 0 + H F ( 1 )
5 S te m X 2 0 C r1 3 ( 3 ) X 2 0 C r1 3 ( 3 ) X 2 0 C r1 3 ( 3 )
6 B a c k s e a t (in te g r a l) O verlay S tellite ( 2 ) O verlay S tellite ( 2 ) O verlay S tellite ( 2 )
7 G la n d X 2 0 C r1 3 X 2 0 C r1 3 X 2 0 C r1 3
8 G la n d fla n g e 1 .0 4 6 0 X 2 0 C r1 3 X 2 0 C r1 3
9 Y o k e s le e v e G G G 5 0 (4 ) G G G 5 0 (4 ) G G G 5 0 (4 )
10 Y oke nut 1 .0 4 6 0 1 .0 4 6 0 1 .0 4 6 0
11 Handw heel S teel S teel S teel
12 Handw heel nut 1 .0 4 6 0 1 .0 4 6 0 1 .0 4 6 0
13 B o lts C K 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
14 N u ts C 35 2 4 C rM o5 2 4 C rM o5
15 R e ta in e r fla n g e 1 .0 4 6 0 1 .0 4 6 0 1 .0 4 6 0
16 R e ta in e r r in g X 2 0 C r1 3 X 2 0 C r1 3 X 2 0 C r1 3
17 S p a c e r r in g X 2 0 C r1 3 X 2 0 C r1 3 X 2 0 C r1 3
18 G asket S . S . rein f orc ed g rap h ite (4 ) S . S . rein f orc ed g rap h ite (4 ) S . S . rein f orc ed g rap h ite (4 )
19 P a c k in g G rap h ite rin g s an d w ip er rin g s G rap h ite rin g s an d w ip er rin g s G rap h ite rin g s an d w ip er rin g s
20 G r e a s e n ip p le S teel S teel S teel
21 Y oke 1 .0 6 1 9 1 .7 3 5 7 1 .7 3 8 0
22 S u p p o r t r in g 1 .0 4 6 0 1 .0 4 6 0 1 .0 4 6 0
23 Y o k e / b o d y b o lt C K 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
24 Y oke / body nut C 35 2 4 C rM o5 2 4 C rM o5
25 N o r o ta tio n d e v ic e C 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
26 B o lt C K 35 2 1 C rM oV 5 7 2 1 C rM oV 5 7
88
PRESSURE SEAL GLOBE VALVES - ‘Y’ TYPE
VALVOSIDER
FIG. P182 - PRESSURE SEAL GLOBE VALVES - Y TYPE - DIN PN 100 - F8

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 500 590 590 600 860 860 1000 1330 1480 -- -- -- --
H1 513 607 610 625 892 898 1050 1393 1555 -- -- -- --
features on request
7 LIMIT SWITCHES 7 FLANGED ENDS
89
VALVOSIDER
MANUFACTURER OF VALVES DIN CHECK VALVES
DESCRIPTION OF A TYPICAL SWING CHECK VALVE - PRESSURE SEAL
BOLT
RETAINER FLANGE
SEGMENTED RETAINER RING
SPACER RING
GASKET
COVER
BODY
BOLT
RETAINER FLANGE
SEGMENTED RETAINER RING
SPACER RING
GASKET
COVER
HINGE PIN
PLUG
HINGE
PLATE
PIN
NUT
DISC
SEAT RING
BODY
90
VALVOSIDER
MANUFACTURER OF VALVES DIN CHECK VALVES 8
TYPE CLASS SIZE FIG. N. TYPE CLASS SIZE FIG. N.
PISTON PN16 15 - 600 1405 SWING PN16 - F6 50 - 1000 1311

CHECK VALVES PN 25/40 15 - 600 1434 CHECK VALVES PN16 - F1 50 - 1000 1312
Y TYPE
PN 63 15 - 600 1560YR PN 25 50 - 1000 1313
PN 100 15 - 300 1570YR PN 40 50 - 1000 1314
PN 63 50 - 600 1315
PN 100 50 - 600 1316
page 96 page 92 PN 160 50 - 600 1317
PISTON PN16 15 - 600 1411 PISTON PN16 15 - 600 1402

CHECK VALVES CHECK VALVES
PN 25/40 15 - 600 1441 PN 25/40 15 - 600 1431
90° ANGLE
PN 63 15 - 600 1560AR PN 63 15 - 600 1560R
PN 100 15 - 300 1570AR PN 100 15 - 300 1570R
PN 160 15 - 300 1580R

page 98 page 94
TILTING DISC PN 100 50 - 600 P172T SWING PN 100 50 - 600 P172

PN 160 50 - 600 P173T PN 160 50 - 600 P173
PN 250 50 - 400 P174T PN 250 50 - 400 P174
PN 320 50 - 400 P175T PN 320 50 - 400 P175
PN 420 50 - 400 P176T PN 420 50 - 400 P176

page 102 page 100
LIFT PN 100 50 - 600 P182PC LIFT PN 100 50 - 600 P162PC

PN 160 50 - 600 P183PC PN 160 50 - 600 P163PC
Y TYPE PN 250 50 - 400 P184PC STRAIGHT PN 250 50 - 400 P164PC
PN 320 50 - 400 P185PC PN 320 50 - 400 P165PC
PN 420 50 - 400 P186PC PN 420 50 - 400 P166PC
page 106 page 104
91
VALVOSIDER SWING CHECK VALVES
standard features
? Description FULL OPENING

BOLTED COVER
2 RENEWABLE SEAT
13
12 DIN 3840
H
6
7
D
8 DIN 2547
10 DIN 2526 FORM E
9
BW TO DIN 3239

3 DIN 3230 Part 3
1 L
? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAME A13xx C13xx FH13xx FK13xx

1 Body 1.0619 1.7363 1.4552 1.4581
2 Cover 1.0619 1.7363 1.4552 1.4581
3 Seat ring surface X20Cr13 (1) X20Cr13 (1) X6CrNiTi18-10 (1) X5CrNiMo17-12-2 (1)
4 Disc seat surface X20Cr13 (2) X20Cr13 (2) X6CrNiTi18-10 (2) X5CrNiMo17-12-2 (2)
5 Hinge 1.0619 (3) X5CrNiMo17-12-2 (3) X6CrNiTi18-10 (3) GX5CrNiMoNb19-11-2 (3)
6 Inge pin X20Cr13 X20Cr13 X6CrNiTi18-10 X5CrNiMo17-12-2
7 Plug 1.0460 X5CrNiMo17-12-2 X5CrNiMo17-12-2 X5CrNiMo17-12-2
8 Plate 1.0460 X5CrNiMo17-12-2 X5CrNiMo17-12-2 X5CrNiMo17-12-2
9 Nut C35 24CrMo5 A2-70 A2-70
10 Pin X5CrNiMo17-12-2 X5CrNiMo17-12-2 X5CrNiMo17-12-2 X5CrNiMo17-12-2
12 Nut C35 24CrMo5 A2-70 A2-70
13 Gasket S.S. spiral wound reinforced graphite (4)
92
SWING CHECK VALVES VALVOSIDER
FIG. 1311 - SWING CHECK VALVES DIN PN 16 - F6

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L RF/BW 200 240 260 300 350 400 500 600 700 800 900 1100 1300 1500 1700 1900 2100
D 165 185 200 220 250 285 340 405 460 520 580 715 840 910 1025 1125 1255
H 150 180 200 225 270 300 355 390 445 495 530 620 730 -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L RF/BW 230 290 310 350 400 480 600 730 850 980 1100 1250 1450 1650 1850 2050 2250
D 165 185 200 220 250 285 340 405 460 520 580 715 840 910 1025 1125 1255
H 150 180 200 225 270 300 355 390 445 495 530 620 730 -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L RF/BW 230 290 310 350 400 480 600 730 850 980 1100 1250 1450 1650 1850 2050 2250
D 165 185 200 235 270 300 360 425 485 555 620 730 845 960 1085 1185 1320
H 165 180 200 235 270 300 360 425 485 495 530 740 -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L RF/BW 230 290 310 350 400 480 600 730 850 980 1100 1250 1450 1650 1850 2050 2250
D 165 185 200 235 270 300 375 450 515 580 660 775 890 995 1140 1250 1360
H 150 180 200 225 270 300 355 390 445 495 530 740 -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L RF/BW 300 340 380 430 500 550 650 775 900 1025 1150 1400 1600 -- -- -- --
D 180 205 215 250 295 345 415 470 530 600 670 800 930 -- -- -- --
H 195 210 230 290 305 370 410 470 520 -- -- -- -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L RF/BW 300 340 380 430 500 550 650 775 900 1025 1150 1400 1600 -- -- -- --
D 195 220 230 265 315 355 430 505 585 655 715 870 990 -- -- -- --
H 195 210 230 290 305 370 410 470 520 -- -- -- -- -- -- -- --

SIZE DN 50 65 80 100 125 150 200 250 300 350 400 500 600 700 800 900 1000
L RF/BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 -- -- -- -- --
D 195 220 230 265 315 355 430 515 585 -- -- -- -- -- -- -- --
H 195 210 230 290 305 370 410 -- -- -- -- -- -- -- -- -- --
features on request
7 DISK WITH PTFE OR RUBBER 7 BY-PASS
7 LEVER AND WEIGHT 7 DRAIN PLUG
7 SHOCK ABSORBER 7 BW ENDS
7 INTEGRAL SEAT 7 ANSI CONNECTIONS
93
VALVOSIDER PISTON CHECK VALVES
standard features

RETURN SPRING
? Design DIN 3352

DIN 3840
6
H
5
8 DIN 2547
D
DIN 2526 FORM E

4
BW TO DIN 3239
3
DIN 3230 Part 3
L
? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAM E G1402 - (CAST IRON) A1431 A1560R A1570R A1580R FK1431 FK1560R FK1570R FK1580R
1 Body EN-GJL-250 1.0619 (A) 1.4581

2 Cover EN-GJL-250 1.0619 (B) 1.4581
3 Seat ring surface N/A X20Cr13 (1) X5CrNiMo17-12-2 (1)
5 Spring X5CrNiMo17-12-2 X5CrNiMo17-12-2 X5CrNiMo17-12-2

7 Nuts C35 C35 A2-70
(2) On request: faced with Stellite - Monel - Hastelloy - other materials For PN > 63 and DN < 25 = 1.0460
(3) On request: PTFE - other materials (B) For PN < 40 and DN < 80 = 1.0460
For PN > 63 and DN < 40 = 1.0460
94
PISTON CHECK VALVES VALVOSIDER
FIG. 1402 - PISTON CHECK VALVES DIN PN 16 - CAST IRON - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
H 70 80 85 100 110 115 130 145 165 185 205 235 250 300 360 410 460 520 570 --
FIG.1431 - PISTON CHECK VALVES DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
H 65 75 85 100 110 125 145 160 190 220 250 295 320 385 450 510 585 610 670 --
FIG. 1560R - PISTON CHECK VALVES DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 1400 1600 --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
H 105 120 120 135 150 160 180 200 230 280 310 340 390 430 500 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
H 105 120 120 135 150 170 200 220 250 300 350 380 410 480 570 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 390 430 515 585 -- -- -- -- --
H 110 125 125 140 155 180 220 240 270 320 370 400 430 500 600 -- -- -- -- --
features on request
7 DISC WITH PTFE OR RUBBER 7 BW ENDS
7 INTEGRAL SEAT 7 RTJ FLANGES
7 BY-PASS 7 ANSI CONNECTIONS
7 DRAIN PLUG
95
VALVOSIDER PISTON CHECK VALVES - ‘Y’ TYPE
standard features

RETURN SPRING
6 ? Design DIN 3352

2 DIN 3840
5
H
7
DIN 2547
4
DIN 2526 FORM E
D
3 BW TO DIN 3239
1
DIN 3230 Part 3
L
? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAM E G1405 - (CAST IRON) A1434 A1560YR A1570YR FK1434 FK1560YR FK1570YR
1 Body EN-GJL-250 1.0619 (A) 1.4581
2 Cover EN-GJL-250 1.0619 (B) 1.4581

7 Nuts C35 C35 A2-70
For PN > 63 and DN < 40 = 1.0460
96
PISTON CHECK VALVES - ‘Y’ TYPE VALVOSIDER
FIG. 1405 - PISTON CHECK VALVES - 'Y' TYPE - DIN PN 16 - CAST IRON - F1
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
H 70 80 85 100 110 115 130 145 165 185 205 235 250 300 360 410 460 520 570 --
FIG.1434 - PISTON CHECK VALVES - 'Y' TYPE - DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
H 65 75 85 100 110 125 145 160 190 220 250 295 320 385 450 510 585 610 670 --
FIG. 1560YR - PISTON CHECK VALVES - 'Y' TYPE - DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 1400 1600 --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 930 --
H 105 120 120 135 150 160 180 200 230 280 310 340 390 430 500 -- -- -- -- --
FIG. 1570YR - PISTON CHECK VALVES - 'Y' TYPE - DIN PN 100 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
H 105 120 120 135 150 170 200 220 250 300 350 380 410 480 570 -- -- -- -- --
features on request
7 DRAIN PLUG
97
VALVOSIDER PISTON CHECK VALVES - 90° ANGLE
standard features

RETURN SPRING
6 ? Design DIN 3352

2 DIN 3840
H
5
8
D ? Flanges DIN 2501
4
DIN 2547
3 DIN 2526 FORM E
1 BW TO DIN 3239
L

DIN 3230 Part 3
D ? Rating DIN 2401

L
? Marking EN 19
CE - PED
PART NAM E G1411 - (CAST IRON) A1441 A1560AR A1570AR FK1441 FK1560AR FK1570AR
1 Body EN-GJL-250 1.0619 (A) 1.4581
2 Cover EN-GJL-250 1.0619 (B) 1.4581

7 Nuts C35 C35 A2-70
For PN > 63 and DN < 40 = 1.0460
98
PISTON CHECK VALVES - 90° ANGLE VALVOSIDER
FIG. 1411 - PISTON CHECK VALVES - 90° ANGLE - DIN PN 16 - CAST IRON - F32
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375 425 475 500 575 675
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
H 70 80 85 100 110 115 130 145 165 185 205 235 250 300 360 410 460 520 570 --
FIG.1441 - PISTON CHECK VALVES - 90° ANGLE - DIN PN 25 / 40 - F32

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375 425 475 500 575 675
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
H 70 80 85 100 110 125 145 160 190 220 250 295 320 385 450 510 585 610 670 --
FIG. 1560AR - PISTON CHECK VALVES - 90° ANGLE - DIN PN 63 - F33

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 500 600 --
L RF/BW 105 105 115 130 130 150 170 190 215 250 275 300 325 390 450 515 575 700 -- --
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 800 -- --
H 105 120 120 135 150 160 180 200 230 280 310 340 390 430 500 -- -- -- -- --
FIG. 1570AR - PISTON CHECK VALVES - 90° ANGLE - DIN PN 100 - F33
SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 -- -- -- -- --
L RF/BW 105 105 115 130 130 150 170 190 215 250 275 300 325 390 450 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
H 105 120 120 135 150 170 200 220 250 300 350 380 410 480 570 -- -- -- -- --
features on request
7 DRAIN PLUG
99
VALVOSIDER SWING CHECK VALVES - PRESSURE SEAL
DIN PN 100 - 160 - 250 - 320 - 420
standard features
? Description PRESSURE SEAL COVER

FULL OPENING
15
WELDED IN SEATS
11
12
14
DIN 3840
2
H
6
5 DIN 2547
8
DIN 2526 FORM E
BW TO DIN 3239
10
4 DIN 3230 Part 3
3
L
1 ? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAM E AP17x FKP17x

1 Body 1.0619 1.4581
2 Cover 1.0619 1.4581
3 Ring - seat surface 1.0460 + HF (1) X2CrNiMo17-12-2 + HF (1)
4 Disc - seat surfaces 1.0619 + HF (2) 1.4581 + HF (2)
5 Hinge 1.0619 1.4581
6 Hinge pin X20Cr13 X5CrNiMo17-12-2
7 Plug (externally) 1.0460 X5CrNiMo17-12-2
8 Plate 1.0460 X5CrNiMo17-12-2
9 Nut C35 A2-70
10 Pin X5CrNiMo17-12-2 X5CrNiMo17-12-2
11 Retainer flange 1.0460 1.4401
12 Segmented retainer ring X20Cr13 1.4401
13 Spacer ring X20Cr13 1.4401
14 Gasket S. S. reinforced graphite (3) S. S. reinforced graphite (3)
15 Bolt CK35 A2-70

100
SWING CHECK VALVES - PRESSURE SEAL VALVOSIDER
FIG. P172 - PRESSURE SEAL SWING CHECK VALVES DIN PN 100 - F2

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
L RF 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
H 180 205 215 275 300 350 390 450 500 555 630 800 1000

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
L RF 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 245 260 250 310 340 390 510 580 620 680 740 850 --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 245 270 290 350 380 420 630 690 750 800 980 -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 245 280 300 380 405 430 650 720 780 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 245 280 300 380 405 430 650 720 780 -- -- -- --
features on request
7 DISC WITH PTFE OR RUBBER 7 FLANGED ENDS
7 DRAIN PLUG
101
VALVOSIDER TILTING DISC CHECK VALVES
MANUFACTURER OF VALVES PRESSURE SEAL DIN PN 100 - 160 - 250 - 320 - 420
standard features
11
7
8
H
WELDED IN SEATS
9
10
? Design DIN 3352
2
DIN 3840
5
3
1
? Flanges DIN 2501
DIN 2547
DIN 2526 FORM E
6 BW TO DIN 3239

DIN 3230 Part 3
? Rating DIN 2401
? Marking EN 19
CE - PED
L
PART NAM E AP17xT FKP 17xT

1 Body 1.0619 1.4581
2 Cover 1.0619 1.4581
5 Pin X5CrNiMo17-12-2 X5CrNiMo17-12-2
6 Plug (externally) 1.0460 X5CrNiMo17-12-2
11 Bolt CK35 A2-70

102
TILTING DISC CHECK VALVES VALVOSIDER
PRESSURE SEAL DIN PN 100 - 160 - 250 - 320 - 420 MANUFACTURER OF VALVES
FIG. P172T - PRESSURE SEAL TILTING DISC CHECK VALVES DIN PN 100 - F2
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
L RF 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
H 180 205 215 275 300 350 390 450 500 555 630 800 1000
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
L RF 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 245 260 250 310 340 390 510 580 620 680 740 850 --
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 245 270 290 350 380 420 630 690 750 800 980 -- --
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 245 280 300 380 405 430 650 720 780 840 1010 -- --
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 245 280 300 380 405 430 650 720 780 840 1010 -- --
features on request
7 DRAIN PLUG
103
MANUFACTURER OF VALVES STRAIGHT TYPE - DIN PN 100 - 160 - 250 - 320 - 420
standard features

WELDED IN SEATS
9
5
? Design DIN 3352
DIN 3840
6
H
8
2
? Flanges DIN 2501
10
DIN 2547
4
DIN 2526 FORM E
3 BW TO DIN 3239
1
DIN 3230 Part 3
L
? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAM E AP16xPC FKP16xPC

1 Body 1.0619 1.4581
2 Cover 1.0619 1.4581
9 Bolt CK35 A2-70
10 Spring X5CrNiMo17-12-2 X5CrNiMo17-12-2

104
STRAIGHT TYPE - DIN PN 100 - 160 - 250 - 320 - 420 MANUFACTURER OF VALVES
FIG. P162PC - PRESSURE SEAL LIFT CHECK VALVES DIN PN 100 - F2

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
L RF 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
H 230 260 280 330 360 450 520 600 700 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
L RF 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 270 285 300 390 410 430 520 60 700 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 270 290 310 400 420 440 530 620 720 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 270 290 310 400 420 440 530 620 720 -- -- -- --

SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 270 290 310 400 420 440 530 620 720 -- -- -- --
features on request
7 DRAIN PLUG
105
MANUFACTURER OF VALVES ‘Y’ TYPE - DIN PN 100 - 160 - 250 - 320 - 420
standard features

WELDED IN SEATS
9
5 ? Design DIN 3352
DIN 3840
6
H
8
2
? Flanges DIN 2501
10
DIN 2547
4
DIN 2526 FORM E
3 BW TO DIN 3239
1
DIN 3230 Part 3
L
? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAM E AP18xPC FKP18xPC

1 Body 1.0619 1.4581
2 Cover 1.0619 1.4581
9 Bolt CK35 A2-70
10 Spring X5CrNiMo17-12-2 X5CrNiMo17-12-2

106
‘Y’ TYPE - DIN PN 100 - 160 - 250 - 320 - 420 MANUFACTURER OF VALVES
FIG. P182PC - PRESSURE SEAL LIFT CHECK VALVES - 'Y' TYPE - DIN PN 100 - F2
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
L RF 300 340 380 430 500 550 650 775 900 1025 1150 1275 1600
H 230 260 280 330 360 450 520 600 700 -- -- -- --
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
L RF 300 360 390 450 525 600 750 900 1050 1200 1350 1650 --
H 270 285 300 390 410 430 520 60 700 -- -- -- --
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 270 290 310 400 420 440 530 620 720 -- -- -- --
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 270 290 310 400 420 440 530 620 720 -- -- -- --
SIZE 50 65 80 100 125 150 200 250 300 350 400 500 600
L BW 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
L RF 350 425 470 550 650 750 950 1150 1350 1550 1750 -- --
H 270 290 310 400 420 440 530 620 720 -- -- -- --
features on request
7 DRAIN PLUG
107
VALVOSIDER
MANUFACTURER OF VALVES DIN STRAINERS
DESCRIPTION OF A TYPICAL STRAINER BASKET TYPE
BODY
SCREEN
GASKET
BOLT
NUT
COVER
108
VALVOSIDER DIN STRAINERS
STRAINERS PN16 15 - 600 1404

PN 25/40 15 - 600 1433
‘ Y ‘ TYPE
PN 63 15 - 600 1560YS
PN 100 15 - 300 1570YS
PN 160 15 - 300 1580YS
page 110
STRAINERS PN16 15 - 600 1401BS

PN 25/40 15 - 600 1430BS
BASKET TYPE
PN 63 15 - 600 1560BS
PN 100 15 - 300 1570BS
PN 160 15 - 300 1580BS
page 112
109
VALVOSIDER STRAINERS - ‘Y’ TYPE
standard features

L REPLACEABLE SCREEN
? Design DIN 3352

DIN 3840
D
H1 - OPEN
DIN 2547
H
3
6 DIN 2526 FORM E
4 BW TO DIN 3239
2
DIN 3230 Part 3
? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAME G1404 - (CAST IRON) A1433 A1560YS A1570YS A1580YS FK1433 FK1560YS FK1570YS FK1580YS
1 Body EN-GJL-250 1.0619 (A) 1.4581
2 Cover EN-GJL-250 1.0619 (B) 1.4581
3 Screen X5CrNi18-10 (1) X5CrNi18-10 (1) X2CrNiMo17-12-2 (1)
5 Nuts C35 C35 A2-70
(1) On request: other materials (A) For PN < 40 and DN < 25 = 1.0460
(B) For PN < 40 and DN < 80 = 1.0460
For PN > 63 and DN < 40 = 1.0460
110
STRAINERS - ‘Y’ TYPE VALVOSIDER
FIG. 1404 - STRAINERS - 'Y' TYPE DIN PN 16 - CAST IRON - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
H 70 80 85 100 110 115 130 145 165 185 205 235 250 300 360 410 460 520 570 --
H1 130 144 155 172 200 220 265 290 340 390 440 505 520 680 845 870 1000 -- -- --
FIG.1433 - STRAINERS - 'Y' TYPE DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
H 70 80 85 100 110 125 145 160 190 220 250 295 320 385 450 510 585 610 670 --
H1 130 144 155 172 200 230 280 305 365 425 485 565 590 765 935 970 1125 -- -- --
FIG. 1560YS - STRAINERS - 'Y' TYPE DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 -- 1400 1600
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 -- 800 930
H 105 120 120 135 150 160 180 200 230 280 310 340 390 430 500 -- -- -- -- --
H1 165 184 190 207 240 265 315 345 405 485 545 610 660 810 985 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
H 105 120 120 135 150 170 200 220 250 300 350 380 410 480 570 -- -- -- -- --
H1 165 184 190 207 240 275 335 365 425 505 585 650 680 860 1055 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 390 430 515 585 -- -- -- -- --
H 110 125 125 140 155 180 220 240 270 320 370 400 430 500 600 -- -- -- -- --
H1 170 189 195 212 245 285 355 385 445 525 605 670 700 880 1085 -- -- -- -- --
features on request
7 SCREEN IN SPECIAL MATERIALS 7 BW ENDS
7 DISCHARGE VALVE 7 ANSI CONNECTIONS
7 DRAIN PLUG
111
VALVOSIDER STRAINERS - BASKET TYPE
standard features

REPLACEABLE SCREEN
? Design DIN 3352

DIN 3840
D
3 DIN 2547
6 DIN 2526 FORM E
H
4 BW TO DIN 3239
2
H1 - OPEN

DIN 3230 Part 3
? Rating DIN 2401
? Marking EN 19
CE - PED
PART NAME FIG. 1401 - (CAST IRON) A1430BS A1560BS A1570BS A1580BS FK1430BS FK1560BS FK1570BS FK1580BS
1 Body EN-GJL-250 1.0619 (A) 1.4581
2 Cover EN-GJL-250 1.0619 (B) 1.4581
3 Screen X5CrNi18-10 (1) X5CrNi18-10 (1) X2CrNiMo17-12-2 (1)
5 Nuts C35 C35 A2-70
(1) On request: other materials (A) For PN < 40 and DN < 25 = 1.0460
(B) For PN < 40 and DN < 80 = 1.0460
For PN > 63 and DN < 40 = 1.0460
112
STRAINERS - BASKET TYPE VALVOSIDER
FIG. 1401BS - STRAINERS - BASKET TYPE DIN PN 16 - CAST IRON - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460 520 580 640 715 840
H 70 80 85 100 110 115 130 145 165 185 205 235 250 300 360 410 460 520 570 --
H1 130 144 155 172 200 220 265 290 340 390 440 505 520 680 845 870 1000 520 570 --
FIG.1430BS - STRAINERS - BASKET TYPE DIN PN 25 / 40 - F1

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850 980 1100 1200 1250 1450
D - PN25 95 105 115 140 150 165 185 200 235 270 300 330 360 425 485 555 620 670 730 845
D - PN40 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515 580 660 685 755 890
H 70 80 85 100 110 125 145 160 190 220 250 295 320 385 450 510 585 610 670 --
H1 130 144 155 172 200 230 280 305 365 425 485 565 590 765 935 970 1125 610 670 --
FIG. 1560BS - STRAINERS - BASKET TYPE DIN PN 63 - F2

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 1025 1150 -- 1400 1600
D 105 130 140 155 170 180 205 215 250 295 345 375 415 470 530 600 670 -- 800 930
H 105 120 120 135 150 160 180 200 230 280 310 340 390 430 500 -- -- -- -- --
H1 165 184 190 207 240 265 315 345 405 485 545 610 660 810 985 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 385 430 505 585 -- -- -- -- --
H 105 120 120 135 150 170 200 220 250 300 350 380 410 480 570 -- -- -- -- --
H1 165 184 190 207 240 275 335 365 425 505 585 650 680 860 1055 -- -- -- -- --

SIZE DN 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 400 450 500 600
L RF/BW 210 230 230 260 260 300 340 380 430 500 550 600 650 775 900 -- -- -- -- --
D 105 130 140 155 170 195 220 230 265 315 355 390 430 515 585 -- -- -- -- --
H 110 125 125 140 155 180 220 240 270 320 370 400 430 500 600 -- -- -- -- --
H1 170 189 195 212 245 285 355 385 445 525 605 670 700 880 1085 -- -- -- -- --
features on request
7 SCREEN IN SPECIAL MATERIALS 7 BW ENDS
7 DISCHARGE VALVE 7 ANSI CONNECTIONS
7 DRAIN PLUG
113
VALVOSIDER
MANUFACTURER OF VALVES VALVOSIDER
DESIGN AND MANUFACTURE OF VALVES your partner in valves
114
VALVOSIDER
MANUFACTURER OF VALVES 1 Special Executions
page 116
2 Dimensions
page 119
ASME 3 Materials & Trim

page 124
4 Ratings
page 125
5 Dimensions
page 128
6 Materials
DIN page 132
7 Materials comparison
page 133
8 Ratings
page 134
9 Flow data
page 135
10 Tables
page 136
115
VALVOSIDER
SPECIAL EXECUTIONS
A B
A B
1 ISO top flange 2 Bevel gearing 3 Bevel gearing with 4 Chain wheel
horizontal handwheel
5 Pneumatic actuator 6 Electric actuator 7 Position indicator 8 Position indicator
9 Position indicator for

globe valve 10 Position indicator with
limit switches 11 Position indicator with
stem protection 12 Position indicator with
limit switches
Floor stand with

13 Extension stem 14 Floor stand 15 universal joint 16 Travel limit
116
SPECIAL EXECUTIONS VALVOSIDER
17 Locking device with 18 Locking system 19 Stem protection 20 Stem protection for
padlock and chain globe valve
21 Lantern ring 22 Lantern ring with double Spring loaded on 24 Spring loaded on
23 stuffing box
ball grease injector eye bolts
25 Solid wedge 26 Flexible wedge 27 Split wedge 28 Parallel disk
29 Welded seat ring 30 Soft seal on seat ring 31 Soft seal on wedge 32 Stop check
117
VALVOSIDER
SPECIAL EXECUTIONS
Flow Flow
Double stage Parabolic / regulating

33 Stop check with spring 34 Guided disk 35 36
opening disk disk
37 Soft seated disk 38 Swing check valve with

outside lever and weight
39 Swing check valve with
shoock absorber
40 Soft seated disk for
check valve
41 Swing check valve with 42 Strainer Y type with 43 Strainer Y type with 44 Body / bonnet seal weld
lifting eyebolt drain plug flange connection
A B
G
45 Pressure seal 46 By pass (front view) 47 By pass ( top view ) 48 Flanges connection
construction
118
FLANGES DIMENSIONS - ASME B16.5 VALVOSIDER
SIZES ½” ÷ 24” - CLASSES 150 ÷ 2500 MANUFACTURER OF VALVES
CLASS 600 & OVER DN = Nominal pipe size (inches)

CLASS 150 & 300 D = Outside diameter of flange
f
f b* = Thickness of flange min.
C = Diameter of hub
h = Height of raised face
b
b
N = Number of bolt holes

f = Diameter of bolt holes
C C
h
h
A = Diameter of bolt circle
RJ = Groove number
A A
D D * raised face included for ANSI Class 150-300
raised face not included for ANSI Class 600-900-1500-2500
CLASS DN D b C h N f A RJ CLASS DN D b C h N f A RJ
150 1/2" 89 11,1 34,9 1,60 4 15 60,3 -- 150 6" 279 25,4 216 1,6 8 22 241 43
300 1/2" 95 14,3 34,9 1,60 4 15 66,7 11 300 6" 318 36,5 216 1,6 12 22 270 45
600 1/2" 95 14,3 34,9 6,35 4 15 66,7 11 600 6" 356 47,6 216 6,35 12 30 292 45
900-1500 1/2" 121 22,2 34,9 6,35 4 22 82,5 12 900 6" 381 55,6 216 6,35 12 32 318 45
150 3/4" 98,4 12,7 42,9 1,60 4 15 69,8 1500 6" 394 82,6 216 6,35 12 39 318 46
300 3/4" 118 15,9 42,9 1,60 4 18 82,5 13 2500 6" 483 108 216 6,35 8 54 368 47
600 3/4" 118 15,9 42,9 6,35 4 18 82,5 13 150 8" 343 28,6 270 1,6 8 22 298 48
900-1500 3/4" 130 25,4 42,9 6,35 4 22 88,9 14 300 8" 381 41,3 270 1,6 12 26 330 49
150 1" 108 14,3 50,8 1,60 4 15 79,4 15 600 8" 419 55,6 270 6,35 12 32 349 49
300 1" 124 17,5 50,8 1,60 4 19 88,9 16 900 8" 470 63,5 270 6,35 12 39 394 49
600 1" 124 17,5 50,8 6,35 4 19 88,9 16 1500 8" 483 92,1 270 6,35 12 45 394 50
900-1500 1" 149 28,6 50,8 6,35 4 25 102 16 2500 8" 552 127 270 6,35 12 54 438 51
150 1"1/4 118 15,9 63,5 1,60 4 15 88,9 17 150 10" 406 30,2 324 1,6 12 25 362 52
300 1"1/4 133 19 63,5 1,60 4 18 98,4 18 300 10" 445 47,6 324 1,6 16 28,6 387 53
600 1"1/4 133 20,6 63,5 6,35 4 18 98,4 18 600 10" 508 63,5 324 6,35 16 36 432 53
900-1500 1"1/4 159 28,6 63,5 6,35 4 26 111 18 900 10" 546 69,8 324 6,35 16 38,1 470 53
150 1"1/2 127 17,5 73 1,60 4 15 98,4 19 1500 10" 584 108 324 6,35 12 52 483 54
300 1"1/2 156 20,6 73 1,60 4 22 114 20 2500 10" 673 165 324 6,35 12 67 540 55
600 1"1/2 156 22,2 73 6,35 4 22 114 20 150 12" 483 31,7 381 1,6 12 26 432 56
900-1500 1"1/2 178 31,8 73 6,35 4 30 124 20 300 12" 521 50,8 381 1,6 16 32 451 57
150 2" 152 19 92,1 1,60 4 19 121 22 600 12" 559 66,7 381 6,35 20 36 490 57
300 2" 165 22,2 92,1 1,60 8 18 127 23 900 12" 610 79,4 381 6,35 20 39 533 57
600 2" 165 25,4 92,1 6,35 8 18 127 23 1500 12" 673 124 381 6,35 16 55 572 58
900-1500 2" 216 38,1 92,1 6,35 8 26 165 24 2500 12" 762 184 381 6,35 12 73 619 60
2500 2" 235 50,8 92,1 6,35 8 29 171 26 150 14" 533 34,9 413 1,6 12 29 476 59
150 2"1/2 178 22,2 105 1,60 4 19 140 25 300 14" 584 54 413 1,6 20 32 514 61
300 2"1/2 191 25,4 105 1,60 8 22 149 26 600 14" 603 69,8 413 6,35 20 39 527 61
600 2"1/2 191 28,6 105 6,35 8 22 149 26 900 14" 641 85,7 413 6,35 20 42 559 62
900-1500 2"1/2 245 41,3 105 6,35 8 30 191 27 1500 14" 749 133 413 6,35 16 60 635 63
2500 2"1/2 267 57,2 105 6,35 8 32 197 28 150 16" 597 36,5 470 1,6 16 28 540 64
150 3" 191 23,8 127 1,60 4 19 152 29 300 16" 648 57,2 470 1,6 20 36 572 65
300 3" 210 28,6 127 1,60 8 22 168 31 600 16" 686 76,2 470 6,35 20 42 603 65
600 3" 210 31,8 127 6,35 8 22 168 31 900 16" 705 88,9 470 6,35 20 45 616 66
900 3" 241 38,1 127 6,35 8 25 191 31 1500 16" 826 146 470 6,35 16 65 705 67
1500 3" 267 47,6 127 6,35 8 32 203 35 150 18" 635 39,7 533 1,6 16 32 578 68
2500 3" 305 66,7 127 6,35 8 34,9 229 32 300 18" 711 60,3 533 1,6 24 36 629 69
150 4" 229 23,8 157 1,60 8 19 191 36 600 18" 743 82,6 533 6,35 20 45 654 69
300 4" 254 31,7 157 1,60 8 22 200 37 900 18" 787 102 533 6,35 20 52 686 70
600 4" 273 38,1 157 6,35 8 26 216 37 1500 18" 914 162 533 6,35 16 75 775 71
900 4" 292 44,45 157 6,35 8 32 235 37 150 20" 699 42,9 584 1,6 20 32 635 72
1500 4" 311 54 157 6,35 8 35 241 39 300 20" 775 63,5 584 1,6 24 36 686 73
2500 4" 356 76,2 157 6,35 8 41 273 38 600 20" 813 88,9 584 6,35 24 45 724 73
150 5" 254 23,8 186 1,60 8 22 216 40 900 20" 857 108 584 6,35 20 55 749 74
300 5" 279 34,9 186 1,60 8 22 235 41 1500 20" 984 178 584 6,35 16 80 832 75
600 5" 330 44,4 186 6,35 8 28 267 41 150 24" 813 47,6 692 1,6 20 36 749 76
900 5" 349 50,8 186 6,35 8 36 279 41 300 24" 914 69,8 692 1,6 24 42 813 77
1500 5" 375 73 186 6,35 8 42 292 44 600 24" 940 102 692 6,35 24 52 838 77
2500 5" 416 92,1 186 6,35 8 48 324 42 900 24" 1041 140 692 6,35 20 65 902 78
1500 24" 1168 203 692 6,35 16 93 991 79
119
VALVOSIDER LARGE DIAMETER STEEL FLANGES - SERIES A
MANUFACTURER OF VALVES ASME B16.47 - MSS SP-44 SIZES 26”÷ 48” - CLASSES 150 ÷ 900
CLASS 600 & OVER DN = Nominal pipe size (inches)

CLASS 150 & 300 D = Outside diameter of flange
f
f b* = Thickness of flange min.
C = Diameter of hub
h = Height of raised face
b
b

f = Diameter of bolt holes
C C
h
h
RJ = Groove number
A A
D D * raised face included for ANSI Class 150-300
raised face not included for ANSI Class 600-900
CLASS DN D b C h N f A RJ CLASS DN D b C h N f A RJ
150 26" 870 68,3 749 1,6 24 35 806 150 38" 1238 87,4 1073 1,6 32 41 1149
300 26" 972 79,2 749 1,6 28 44 876 93 300 38" 1168 108,0 1029 1,6 32 41 1092
600 26" 1016 108,0 749 6,3 28 51 914 93 600 38" 1270 152,4 1054 6,3 28 60 1162
900 26" 1086 139,7 953 6,3 20 73 953 100 900 38" 1461 190,5 1289 6,3 20 92 1289
150 28" 927 71,4 800 1,6 28 35 864 150 40" 1289 90,4 1124 1,6 36 41 1200
300 28" 1035 85,9 800 1,6 28 44 940 94 300 40" 1238 114,3 1086 1,6 32 44 1156
600 28" 1073 111,3 800 6,3 28 54 965 94 600 40" 1321 158,8 1111 6,3 32 60 1213
900 28" 1168 142,7 1022 6,3 20 79 1022 101 900 40" 1511 196,9 1340 6,3 24 92 1340
150 30" 984 74,7 857 1,6 28 35 914 150 42" 1346 96,8 1194 1,6 36 41 1257
300 30" 1092 91,9 857 1,6 28 48 997 95 300 42" 1289 119,1 1137 1,6 32 44 1207
600 30" 1130 114,3 857 6,3 28 54 1022 95 600 42" 1403 168,1 1168 6,3 28 67 1283
900 30" 1232 149,4 1086 6,3 20 79 1086 102 900 42" 1562 206,2 1391 6,3 24 92 1391
150 32" 1060 81,0 914 1,6 28 41 978 150 44" 1403 101,6 1245 1,6 40 41 1314
300 32" 1149 98,6 914 1,6 28 51 1054 96 300 44" 1353 124,0 1194 1,6 32 48 1264
600 32" 1194 117,3 914 6,3 28 60 1080 96 600 44" 1454 173,0 1226 6,3 32 67 1334
900 32" 1314 158,8 1156 6,3 20 86 1156 103 900 44" 1648 214,4 1464 6,3 24 99 1464
150 34" 1111 82,6 965 1,6 32 41 1029 150 46" 1454 103,1 1295 1,6 40 41 1365
300 34" 1207 101,6 965 1,6 28 51 1105 97 300 46" 1416 128,5 1245 1,6 28 51 1321
600 34" 1245 120,7 965 6,3 28 60 1130 97 600 46" 1511 179,3 1276 6,3 32 67 1391
900 34" 1397 165,1 1226 6,3 20 92 1226 104 900 46" 1734 225,6 1537 6,3 24 105 1537
150 36" 1168 90,4 1022 1,6 32 41 1086 150 48" 1511 108,0 1359 1,6 44 41 1422
300 36" 1270 104,6 1022 1,6 32 54 1168 98 300 48" 1467 133,4 1302 1,6 32 51 1372
600 36" 1314 124,0 1022 6,3 28 67 1194 98 600 48" 1594 189,0 1334 6,3 32 73 1461
900 36" 1461 171,5 1289 6,3 20 92 1289 105 900 48" 1784 233,4 1588 6,3 24 105 1588
FLANGES FACING FINISH

NOMINAL ROUGHNESS GRADES (Ra) FOR ASME B16.5
ROUGHNESS COMPARISON SPECIMENS - ASME B46.1 TONGUE AND GROOVE - SMALL MALE AND FEMALE
µm µin. The gasket contact surface shall not exceed
125 microinches ( 3,2 micrometers) roughness.
0.006 0.25 RING JOINT
0.0125 0.5 The side wall surface of gasket groove shall not exceed
0.025 1 63 microinches ( 1,6 micrometers) roughness.
0.05 2 OTHER FLANGE FACINGS
Either a serrated concentric or serrated spiral finish having
0.1 4 a resultant surface finish from 125 microinches to 250 microinches
0.2 8 ( 3,2 to 6,3 micrometers) average roughness.
0.4 16
0.8 32 MSS SP-6 - steel
1.6 63 FLAT OR 1/6” (1.6 mm) RAISED FACE AND 1/4” (6.4 mm) RAISED
AND LARGE MALE & FEMALE
3.2 125 Serrated: spiral or concentric, 45 to 55 per inch (18 to 21 per cm).
6.3 250 Surface finish shall have a 125 to 250 microinches (3.2 to
12.5 500 6.3 micrometers) Ra.
25 1,000 SMALL MALE & FEMALE, LARGE & SMALL TONGUE & GROOVE
50 2,000 Serrated (as above) or non-serrated:
125 microinches ( 3,2 micrometers) Ra max.
100 4,000 RING JOINT
200 8,000 Non-serrated: 63 microinches (1.6 micrometers) Ra max.
400 16,000 according to ASME B46.1.
The finish of contact faces of pipe flanges and connecting end flanges of fittings shall be judged by visual comparison with Ra standards.
120
END FLANGE FACINGS - ASME B16.5 VALVOSIDER
SM SF LM LF
SMALL MALE SMALL FEMALE LARGE MALE LARGE FEMALE
W
R
S
L
h(f) h(f)
h(m) h(f) h(m) h(f)
ST SG LT LG
SMALL TONGUE SMALL GROOVE LARGE TONGUE LARGE GROOVE
W
U
R
K
Z
T
L
h(m) h(f) h(m) h(f)
h(m) h(f) h(m) h(f)
F A C E T O F A C E D IM E N S IO N S - A S M E B 1 6 .1 0
CLASS RF M ALE FEM ALE
150 / 300 SEE CATALO G UE RF + 13 m m RF + 10 m m
600 / 900 / 1500 SEE CATALO G UE RF RF - 3 mm
DIMENSIONS OF FACING (mm)
OUTSIDE
INT. INT. RAISED FACE
OUTSIDE DIAMETER OUTSIDE DIAMETER DIAMETER OF
DIAM. DIAM. HEIGHT
RAISED PORTION
Raised Large and
Small
face, Large Large and small male Large
Nominal lapped, Small Large and 150 and Depth of Female
Small female Small Small small and Female
pipe size large male male small 300 Lbs. groove or and
tongue and large female groove groove tongue and Groov
(inches) ** tongue Class female Groove
and large groove ** 400/2500 (min.)
(min.)
tongue Lbs. Class
R S T U W X Y Z h h(m) h(f) K L
1"1/2 73,1 44,4 63,5 53,8 74,6 45,9 65 52,3 1,6 6,35 4,8 73 84,1
2" 91,8 57,1 82,5 73,1 93,7 58,7 84,1 71,4 1,6 6,35 4,8 92 103,1
2"1/2 104,6 68,3 95,2 85,8 106,4 69,8 96,8 84,1 1,6 6,35 4,8 105 115,8
3" 127,0 84,1 117,3 107,9 128,5 85,8 119,1 106,4 1,6 6,35 4,8 127 138,2
4" 157,2 109,5 144,5 131,8 158,7 111,2 146,0 130,0 1,6 6,35 4,8 157 168,1
5" 185,7 136,6 173,0 160,3 187,4 138,1 174,7 158,7 1,6 6,35 4,8 186 196,8
6" 215,9 162,0 203,2 190,5 217,5 163,5 204,7 188,9 1,6 6,35 4,8 216 227,0
8" 269,7 212,8 254,0 238,2 271,5 214,3 255,5 236,5 1,6 6,35 4,8 270 281,0
10" 323,8 266,7 304,8 285,7 325,4 268,2 306,3 284,2 1,6 6,35 4,8 324 335,0
12" 381,0 317,5 361,9 342,9 382,5 319,0 363,5 341,3 1,6 6,35 4,8 381 392,1
14" 412,7 349,2 393,7 374,6 414,3 350,8 395,3 373,1 1,6 6,35 4,8 413 423,9
16" 469,9 400,0 447,5 425,4 471,4 401,6 449,3 423,9 1,6 6,35 4,8 470 481,0
18" 533,4 450,8 511,0 488,9 535,0 452,4 512,8 487,4 1,6 6,35 4,8 533 544,5
20" 584,2 501,6 558,8 533,4 585,7 503,2 560,3 531,8 1,6 6,35 4,8 584 595,3
24" 692,1 603,2 666,7 641,3 693,7 604,8 668,8 639,8 1,6 6,35 4,8 692 703,3
** Large male and female faces and large tongue and groove are not applicable to Class 150 because of potential dimensional conflict.
121
VALVOSIDER BUTT WELDING ENDS - ASME B16.25
MANUFACTURER OF VALVES SOCKET WELDING ENDS - ASME B16.11
BUTT WELDING ENDS - ASME B16.25

t = pipe thickness
45° max 37,5° +2,5°
45° max 1.5 t min A = O.D. nominal of
component at the
1.5 t min 10° ±1 welding end
30° max 30° max
B = I.D. at the welding end
(Nom. O.D. of pipe - 2t)
1.6 ±0.8 19±2
1.6 ±0.8
A A
30° max 1.5 t
(13 min) B 30° max 1.5 t B
(13 min)
2 t min
2 t min
37.5°+2.5°
WELD BEVEL FOR WALL THICKNESS NOT OVER 22mm WELD BEVEL FOR WALL THICKNESS OVER 22mm
Fig. 2b - ASME B16.25 Fig. 3b - ASME B16.25
Nom . A W a ll th ic k n e s s o f p ip e
DN
p ip e
(in c h e s ) (1 ) s c h . 2 0 s c h . 3 0 s c h . S td . s c h . 4 0 s c h . 6 0 s c h . xs s c h . 8 0 s c h . 1 0 0s c h . 1 2 0s c h . 1 4 0s c h . 1 6 0 s c h . xxs
O .D .
1 " 1 /2 4 8 .3 n .a . 3 .6 8 3 .6 8 5 .0 8 5 .0 8 7 .1 4 1 0 .1 6
2" 6 0 .3 n .a . 3 .9 1 3 .9 1 5 .5 4 5 .5 4 8 .7 4 1 1 .0 7
2 " 1 /2 7 3 .0 75 5 .1 6 5 .1 6 7 .0 1 7 .0 1 9 .5 2 1 4 .0 2
3" 8 8 .9 91 5 .4 9 5 .4 9 7 .6 2 7 .6 2 1 1 .1 3 1 5 .2 4
4" 1 1 4 .3 117 6 .0 2 6 .0 2 8 .5 6 8 .5 6 1 1 .1 3 1 3 .4 9 1 7 .1 2
5" 1 4 1 .3 144 6 .5 5 6 .5 5 9 .5 2 9 .5 2 1 2 .7 0 1 5 .8 8 1 9 .0 5
6" 1 6 8 .3 172 7 .1 1 7 .1 1 1 0 .9 7 1 0 .9 7 1 4 .2 7 1 8 .2 6 2 1 .9 5
8" 2 1 9 .1 223 6 .3 5 7 .0 4 8 .1 8 8 .1 8 1 0 .3 1 1 2 .7 0 1 2 .7 0 1 5 .0 9 1 8 .2 6 2 0 .6 2 2 3 .0 1 2 2 .2 2
10" 2 7 3 .0 278 6 .3 5 7 .8 0 9 .2 7 9 .2 7 1 2 .7 0 1 2 .7 0 1 5 .0 9 1 8 .2 6 2 1 .4 4 2 5 .4 0 2 8 .5 8 2 5 .4 0
12" 3 2 3 .8 329 6 .3 5 8 .3 8 9 .5 2 1 0 .3 1 1 4 .2 7 1 2 .7 0 1 7 .4 8 2 1 .4 4 2 5 .4 0 2 8 .5 7 3 3 .3 2
14" 3 5 5 .6 362 7 .9 2 9 .5 2 9 .5 2 1 1 .1 2 1 5 .0 9 1 2 .7 0 1 9 .0 5 2 3 .8 3 2 7 .7 6 3 1 .7 5 3 5 .7 1
16" 4 0 6 .4 413 7 .9 2 9 .5 2 9 .5 2 1 2 .7 0 1 6 .6 6 1 2 .7 0 2 1 .4 4 2 6 .1 9 3 0 .9 4 3 6 .5 2 4 0 .4 6
18" 4 5 7 .2 464 7 .9 2 1 1 .1 3 9 .5 2 1 4 .2 7 1 9 .0 5 1 2 .7 0 2 3 .8 3 2 9 .3 6 3 4 .9 2 3 9 .6 7 4 5 .2 4
20" 5 0 8 .0 516 9 .5 2 1 2 .7 0 9 .5 2 1 5 .0 6 2 0 .6 2 1 2 .7 0 2 6 .1 9 3 2 .5 4 3 8 .1 0 4 4 .4 5 4 9 .9 9
24" 6 0 9 .6 619 9 .5 2 1 4 .2 7 9 .5 2 1 7 .4 5 2 4 .5 9 1 2 .7 0 3 0 .9 4 3 8 .8 9 4 6 .0 2 5 2 .3 7 5 9 .5 1
(1 ) T h e d ia m e te rs lis te d a re n o t re q u ire m e n ts
SOCKET WELDING ENDS - ASME B16.11 (not for auxiliary connections - see ASME B16.34)
Class 3000 Class 6000 Class 9000
Nominal B J Sch. 80 Sch. 160 Wall Des. XXS
DN
pipe size mm mm C D C D C D
mm
(inches) (min.) (min.) mm mm mm mm mm mm
(min.) (min.) (min.) (min.) (min.) (min.)
6 1/8" 10,8 9,5 3,18 6,1 3,43 3,2 -- --
C
8 1/4" 14,2 9,5 3,30 8,5 4,01 5,6 -- --
10 3/8" 17,6 9,5 3,50 11,8 4,37 8,4 -- --
D B 15 1/2" 21,8 9,5 4,09 15,0 5,18 11,0 5,94 5,6
20 3/4" 27,2 12,5 4,27 20,2 6,04 14,8 6,93 10,3
25 1" 33,9 12,5 4,98 25,9 6,93 19,9 7,95 14,4
32 1" 1/4 42,7 12,5 5,28 34,3 9,93 28,7 7,95 22,0
J 40 1" 1/2 48,8 12,5 5,54 40,1 7,80 33,2 8,91 27,2
50 2" 61,2 16,0 6,04 51,7 9,50 42,1 10,89 37,4
65 2" 1/2 73,9 16,0 7,67 61,2 -- -- -- --
80 3" 89,8 16,0 8,30 76,4 -- -- -- --
100 4" 115,2 16,0 9,35 100,7 -- -- -- --
122
AUXILIARY CONNECTIONS - ASME B16.34 VALVOSIDER
NPT - THREADS - ASME B1.20.1 MANUFACTURER OF VALVES
AUXILIARY CONNECTION - TAPS - DRAINS - BY PASSES

K (on same
side as
E & F)
I H
J F(A) F A A B
A B
E(B) G D E B C G D
C G D
A B E&F A B
C D D C D
A&B G E G F
E G F
GATE VALVE GLOBE VALVE CHECK VALVE
AUXILIARY CONNECTIONS - BYPASS AND DRAIN CONNECTIONS

J
A
T B
0.06 in
min.
BOSSES THREAD LENGHT SOCKET WELDING BUTT WELDING
Size of Valve 2” to 4” 5” to 8” 10” to 24”

Size of Connections ½” 3/4” 1”
Length of Thread T 14 14 18
Min.Diam. of Socket A 22 27 34
Min.Depth. of Socket B 5 6.5 6.5
Diameter of Boss J 38 44 54
Size of Tapping ½” 3/4” 1”
NPT THREAD STANDARDS - ASME B1.20.1

L4 WRENCH PITCH
LENGTH OF MAKEUP OVERALL DIAM. AT
NOMINAL OUTSIDE PITCH
L2 THREADS HANDTIGHT EFFECTIVE LENGTH LENGTH BEGINNING
PIPE SIZE DIAMETER OF
L3 PER INCH ENGAGEMENT THREAD FOR EXTERNAL OF
L1 Vanish threads (INCH) OF PIPE THREAD
(EXTERNAL) INTERNAL THREAD EXTERNAL
p due to chamfer THREAD THREAD
on die
DN D (n) P L1 L2 L3 L4 E0
1/8 10,29 27 0,940 4,572 6,703 2,822 9,967 9,233
1/4 13,72 18 1,412 5,080 10,206 4,234 15,103 12,126
3/8 17,14 18 1,412 6,096 10,358 4,234 15,255 15,545
1/2 21,34 14 1,814 8,128 13,556 5,443 19,850 19,263

D
E0
3/4 26,67 14 1,814 8,611 13,861 5,443 20,155 24,58

p = Pitch 1 33,40 11,5 2,210 10,160 17,343 6,627 25,006 30,825
E1
Depth of thread = 0.80p

30 ° 30° 1 1/4 42,16 11,5 2,210 10,668 17,953 6,627 25,616 39,55
°
90
E0 = D - (0.050d + 1.1)p
1 1/2 48,26 11,5 2,210 10,668 18,377 6,627 26,040 45,621
E1 = E0 + 0.0625L1
L2 = (0.80D + 6.8)p 2 60,32 11,5 2,210 11,074 19,215 6,627 26,878 57,633
123
VALVOSIDER
ASTM MATERIALS SPECIFICATIONS
ASTM chemical composition % mechanical properties

Mpa % %
Number Grade C Mn P S Si Cr Mo Ni others
R S Ap. C
A 216 WCB max. 0,30 max. 1,00 max. 0,04 max. 0,045 max. 0,60 -- -- -- -- 485 250 22 35
A 352 LCB max. 0,30 max. 1,00 max. 0,04 max. 0,045 max. 0,60 -- -- -- -- 450 240 24 35
A 352 LC 2 max. 0,25 0,50 - 0,80 max. 0,04 max. 0,045 max. 0,60 -- -- 2,00 - 3,00 -- 485 275 24 35
A 352 LC 3 max. 0,15 0,50 - 0,80 max. 0,04 max. 0,045 max. 0,60 -- -- 3,00 - 4,00 -- 485 275 24 35
A 217 WC 1 max. 0,25 0,50 - 0,80 max. 0,04 max. 0,045 max. 0,60 -- 0,45 - 0,65 -- -- 450 240 24 35
A 217 WC 5 max. 0,20 0,40 - 0,70 max. 0,04 max. 0,045 max. 0,60 0,50 - 0,90 0,90 - 1,20 0,60 - 1,00 -- 485 275 20 35
A 217 WC 6 max. 0,20 0,50 - 0,80 max. 0,04 max. 0,045 max. 0,60 1,00 - 1,50 0,45 - 0,65 -- -- 485 275 20 35
A 217 WC 9 max. 0,18 0,40 - 0,70 max. 0,04 max. 0,045 max. 0,60 2,00 - 2,75 0,90 - 1,20 -- -- 485 275 20 35
CASTINGS
A 217 C5 max. 0,20 0,40 - 0,70 max. 0,04 max. 0,045 max. 0,75 4,00 - 6,50 0,45 - 0,65 -- -- 620 415 18 35
A 217 C 12 max. 0,20 0,35 - 0,65 max. 0,04 max. 0,045 max. 1,00 8,00 - 10,00 0,90 - 1,20 -- -- 620 515 18 35
A 217 CA 15 max. 0,15 max. 1,00 max. 0,04 max. 0,04 max. 1,50 11,50 - 14,00 max. 0,50 max. 1,00 -- 620 450 18 30
A 351 CF 3 max. 0,03 max. 1,50 max. 0,04 max. 0,04 max. 2,00 17,00 - 21,00 max. 0,50 8,00 - 12,00 -- 485 205 35 --
A 351 CF 8 max. 0,08 max. 1,50 max. 0,04 max. 0,04 max. 2,00 18,00 - 21,00 max. 0,50 8,00 - 11,00 -- 485 205 35 --
A 351 CF 8 C max. 0,08 max. 1,50 max. 0,04 max. 0,04 max. 2,00 18,00 - 21,00 -- 9,00 - 12,00 [
Cb min. 8xC
max. 1,00 485 205 30 --
A 351 CF 3 M max. 0,03 max. 1,50 max. 0,04 max. 0,04 max. 1,50 17,00 - 21,00 2,00 - 3,00 9,00 - 13,00 -- 485 205 30 --
A 351 CF 8 M max. 0,08 max. 1,50 max. 0,04 max. 0,04 max. 1,50 18,00 - 21,00 2,00 - 3,00 9,00 - 12,00 -- 485 205 30 --
A 351 CG 8M max. 0,08 max. 1,50 max. 0,04 max. 0,04 max. 1,50 18,00 - 21,00 3,00 - 4,00 9,00 - 13,00 -- 515 240 25 --
A 351 CK3MCuN max. 0,025 max. 1,20 max. 0,045 max. 0,01 max. 1,00 19,50 - 20,50 6,00 - 7,00 17,50 - 19,50 Cu 0.5 - 1.00 550 260 35 --
N 0.18-0.24
A 351 CN7M max. 0,07 max. 1,50 max. 0,04 max. 0,04 max. 1,50 19,00 - 22,00 2,00 - 3,00 27,50 - 30,50 Cu 3,0 - 4,0 425 170 35 --
A 890 4A max. 0,03 max. 1,50 max. 0,04 max. 0,02 max. 1,0 21,00 - 23,50 2,50 - 3,50 4,50 - 6,50 Cu max 1.00 620 415 25 --
N 0.10-0.30
A 890 5A max. 0,03 max. 1,50 max. 0,04 max. 0,04 max. 1,0 24,00 - 26,00 4,00 - 5,00 6,00 - 8,00 N 0.10-0.30 690 515 18 --
Cu&W 0.5-1.0
A 890 6A max. 0,03 max. 1,00 max. 0,03 max. 0,025 max. 1,0 24,00 - 26,00 3,00 - 4,00 6,50 - 8,50 N 0.20-0.30 700 450 25 --
A 105 II max. 0,35 max. 0,90 max. 0,05 max. 0,05 max. 0,35 -- -- -- -- 485 250 22 30
A 181 CL 60 max. 0,35 max. 0,90 max. 0,05 max. 0,05 max. 0,35 -- -- -- -- 415 205 22 35
A 181 CL 70 max. 0,35 max. 0,90 max. 0,05 max. 0,05 max. 0,35 -- -- -- -- 485 250 18 24
A 350 LF 2 max. 0,35 0,60 - 1,35 max. 0,35 max. 0,04 0,15 - 0,30 max. 0,30 max. 0,12 max. 0,40 Cu max 0,40 485 250 22 30
A 350 LF 3 max. 0,20 max. 0,90 max. 0,035 max. 0,04 0,20 - 0,35 -- -- 3,30 - 3,70 -- 485 260 22 35
A 182 F1 max. 0,28 0,60 - 0,90 max. 0,045 max. 0,045 0,15 - 0,35 -- 0,44 - 0,65 -- -- 485 275 20 30
A 182 F5 max. 0,15 0,30 - 0,60 max. 0,03 max. 0,03 max. 0,50 4,00 - 6,00 0,44 - 0,65 max. 0,50 -- 485 275 20 35
A 182 F 6a CL.2 max. 0,12 max. 1,00 max. 0,04 max. 0,03 max. 1,00 11,50 - 13,50 -- max. 0,50 -- 585 380 18 35
FORGINGS
A 182 F9 max. 0,15 0,30 - 0,60 max. 0,03 max. 0,03 0,50 - 1,00 8,00 - 10,00 0,90 - 1,10 -- -- 585 380 20 40
A 182 F 10 0,01 - 0,20 0,50 - 0,80 max. 0,03 max. 0,03 1,00 - 1,40 7,00 - 9,00 -- 19,00 - 22,00 -- 550 205 30 50
A 182 F 11 CL.2 0,05 - 0,15 0,30 - 0,60 max. 0,03 max. 0,03 0,50 - 1,00 1,00 - 1,50 0,44 - 0,65 -- -- 485 275 20 30
A 182 F 12 CL.2 0,10 - 0,20 0,30 - 0,80 max. 0,04 max. 0,04 0,10 - 0,60 0,80 - 1,25 0,44 - 0,65 -- -- 485 275 20 30
A 182 F 20 max. 0,07 max. 2,00 max. 0,045 max. 0,035 max. 1,00 19,00 - 21,00 2,00 - 3,00 32,00 - 38,00 550 240 30 50
A 182 F 22 0,05 - 0,15 0,30 - 0,60 max. 0,04 max. 0,04 max. 0,50 2,00 - 2,50 0,87 - 1,13 -- -- 415 205 20 35
A 182 F 44 max. 0,02 max. 1,00 max. 0,03 max. 0,01 max. 0,80 19,5 - 20,5 6,0 6,5 17,5 - 18,5 Cu 0.50-1.00 650 300 35 50
N 0.18-0.22
A 182 F 51 max. 0,03 max. 2,00 max. 0,03 max. 0,02 max. 1,00 21,0 - 23,0 2,5 3,5 4,5 - 6,5 N [ min 0.08
max 0.20 620 450 25 45
Cu max 0.50
A 182 F 53 max. 0,03 max. 1,20 max. 0,035 max. 0,02 max. 0,80 24,0 - 26,0 3,0 5,0 6,0 - 8,0 N 0.24-0.32 750 515 15 ..
A 182 F 304 max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 18,00 - 20,00 -- 8,00 - 11,00 -- 515 205 30 50
A 182 F 310 max. 0,15 max. 2,00 max. 0,045 max. 0,03 max. 1,00 24,00 - 26,00 -- 19,00 - 22,00 -- 515 205 30 50
A 182 F 316 max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 16,00 - 18,00 2,00 - 3,00 10,00 - 14,00 -- 515 205 30 50
A 182 F 316L max. 0,035 max. 2,00 max. 0,045 max. 0,03 max. 1,00 16,00 - 18,00 2,00 - 3,00 10,00 - 15,00 -- 485 170 30 50
A 182 F 321 max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 min. 17,00 -- min. 5xC
9,00 - 12,00 Ti [ max. 515 205 30 50
0,70
A 182 F 347 max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 17,00 - 20,00 -- min. 10xC
9,00 - 13,00 Cb [ max. 515 205 30 50
1,00
AISI 431 max. 0,20 max. 1,00 max. 0,04 max. 0,03 max. 1,00 15,00 - 17,00 -- 1,25 - 2,50 -- -- -- -- --
17.4 PH ® max. 0,07 max. 1,00 max. 0,04 max. 0,03 max. 1,00 15,00 - 17,50 max. 0,50 3,00 - 5,00 Cbmin.8xC/max.1
Cu 0.5 - 1.0 860 725 16 50
A 193 B7 0,37 - 0,49 0,65 - 1,10 max. 0,035 max. 0,04 0,15 - 0,35 0,75 - 1,20 0,15 - 0,25 -- -- 860 720 16 50
A 193 B 16 0,36 - 0,47 0,45 - 0,70 max. 0,035 max. 0,04 0,15 - 0,35 0,80 - 1,15 0,50 - 0,65 -- Va 0,25-0,35 860 725 18 50
A 193 B8 -- --
BOLTINGS
max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 18,00 - 20,00 8,00 - 10,50 * * * *
A 193 B 8M max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 16,00 - 18,00 2,00 - 3,00 10,00 - 14,00 -- * * * *
A 320 B8 max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 18,00- 20,00 -- 8,00 - 10,50 -- * * * *
A 320 L7 0,38 - 0,48 0,75 - 1,00 max. 0,035 max. 0,04 0,15 - 0,35 0,80 - 1,10 0,15 - 0,25 -- -- 860 725 16 50
A 194 2H min. 0,40 max. 1,00 max. 0,04 max. 0,05 max. 0,4 -- -- -- -- -- -- -- --
A 194 3 max. 0,10 max. 1,00 max. 0,04 max. 0,03 max. 1,00 4,00 - 6,00 0,40 - 0,65 -- -- -- -- -- --
A 194 4 0,40 - 0,50 0,70 - 0,90 max. 0,035 max. 0,04 0,15 - 0,35 -- 0,20 - 0,30 -- -- -- -- -- --
A 194 8 max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 18,00 - 20,00 -- 8,00 - 10,50 -- -- -- -- --
A 194 8M max. 0,08 max. 2,00 max. 0,045 max. 0,03 max. 1,00 16,00 - 18,00 2,00 - 3,00 10,00 - 14,00 -- -- -- -- --
124
TRIM MATERIALS
API STANDARD 600
VALVOSIDER
MATERIAL TYPE
DISC / WEDGE SEAT RING STEM SM ALL SERVICE
API 600 SEAT SURFACES SURFACES HINGE PIN BACK SEAT INTERNAL
TRIM No. (1) (1) (2) PARTS
General erosive or non-corrosive service
1 13Cr 13Cr 13Cr 13Cr 13Cr
between -100 °C and 400 °C
For m oderate pressure in non-erosive,
2 18Cr - 8Ni 18Cr - 8Ni 18Cr - 8Ni 18Cr - 8Ni 18Cr - 8Ni
corrosive service between -265 °C and 320
For m oderate pressure in corrosive or non
4 Hard 13Cr Hard 13Cr 13Cr 13Cr 13Cr As trim No. 1 but for m edium pressure
High pressure sligthly erosive and
5 HF HF 13Cr 13Cr 13Cr
5A HF (A) HF (A) 13Cr 13Cr 13Cr As trim No. 5 where Co is not allowed
6 13Cr NiCu alloy 13Cr 13Cr 13Cr As trim No. 1
7 13Cr Hard 13Cr 13Cr 13Cr 13Cr As trim No. 1 for m oderate pressure
8 13Cr HF 13Cr 13Cr 13Cr As trim No. 5 for m oderate pressure
8A 13Cr HF (A) 13Cr 13Cr 13Cr As trim No. 5A for m oderate pressure
Very corrosive fluids, erosive-corrosive
9 NiCu alloy NiCu alloy NiCu alloy NiCu alloy NiCu alloy
service between -240 °C and 480 °C
10 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo As trim No. 2
11 NiCu alloy HF NiCu alloy NiCu alloy NiCu alloy As trim No. 9 but for m edium pressure
12 18Cr - 8Ni - Mo HF 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo As trim No. 10 but for m edium pressure
Very corrosive service, for m oderate
pressure between -45 °C and 320 °C
14 19Cr - 29Ni HF 19Cr - 29Ni 19Cr - 29Ni 19Cr - 29Ni As trim No. 13 but for m edium pressure
15 HF HF 18Cr - 8Ni 18Cr - 8Ni 18Cr - 8Ni As trim No. 2
16 HF HF 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo 18Cr - 8Ni - Mo As trim No. 10
NOTES:
1) The base materials of disc, wedge and seat ring shall be, at least, equal in corrosion resistance
to that of the body material. (Acc. to API Standard 600)
2) Stem shall be wrought material.
Cr = chromium; Ni = nickel; Co = cobalt; Mo = molybdenum. Ni-Cu alloy = Monel
HF = Hard Facing using CoCr (commercial name Stellite ) welding wire or electrode AWS a 5.13 “E-Co-Cr-A” hb >= 350; thickness 1.6 mm
NiCr welding alloy. The suffix A applies to NiCr (5A..8A..)
CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES OF OTHER MATERIALS

ASTM chemical composition % mechanical properties
Mpa %
designation Ni Cu Fe Mo Mn C Cr Si S Ti W Co Al
R S Ap.
Hastelloy B ® 61 -- 5 28 -- 0,05 1 -- -- -- -- 2,5 -- 588-902 343-392 15 - 50
Hastelloy C ® 54 -- 6 16 -- 0,08 15,1 -- -- -- 4 2,5 -- 549-892 353-471 10 - 49
Monel 8 400 ® 63 - 68 remaining 3,0 -- 0,5 - 1,5 0,12 -- 3,5 - 4,0 0,05 -- -- -- -- 618-696 -- --
Monel K 500 ® 63 - 70 27 - 33 2,0 -- 1,5 0,25 -- 1,0 0,01 -- -- -- 2,0 - 4,0 892-1049 559-755 30 - 20
Stellite N. 6 ® -- -- -- -- 0,25 1,40 29 1,20 -- -- 8 60 -- -- -- --
Inconel 625 ® min. 58 -- max. 5,0 8.0 - 10.0 max. 0,5 max. 0,1 22.0 - 23.0 max. 0,5 max. 0,015 max. 0,4 max. 1.0 max. 0,4 896 483 50
125
VALVOSIDER PRESSURE-TEMPERATURE RATINGS
MANUFACTURER OF VALVES ASME B16.34
WCB(a) WCC(a) LCB(b) WC1(h) WC4(j) WC6(m) WC9(m) C5 C12 CF3(e) CF8M(g) CF8C(g)
MATERIALS LCC(b) LC1(b) WC5 CF8(g) CF3M(f)
LC2(b)
LC3(b)
TEMPERATURE
CLASS Working pressure (bars)
°C
- 29 to 38 19,6 20,0 18,4 18,4 20,0 20,0 20,0 20,0 20,0 19,0 19,0 19,0
50 19,2 19,2 18,1 18,3 19,3 19,2 19,2 19,2 19,2 18,4 18,4 18,5
100 17,7 17,7 17,3 17,7 17,7 17,7 17,7 17,7 17,7 15,7 16,2 16,7
150 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 15,8 13,9 14,8 15,5
200 14,0 14,0 14,0 14,0 14,0 14,0 14,0 14,0 14,0 12,6 13,7 14,0
250 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 12,1 11,7 12,1 12,1
300 10,2 10,2 10,2 10,2 10,2 10,2 10,2 10,2 10,1 10,2 10,2 10,2
350 8,4 8,4 8,4 8,4 8,4 8,4 8,4 8,4 8,4 8,4 8,4 8,4
400 6,5 6,5 6,5 6,5 6,5 6,5 6,5 6,5 6,5
150 425 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6 5,6
450 4,7 4,7 4,7 4,7 4,7 4,7 4,7 4,7 4,7
(PN 20) 500 2,8 2,8 2,8 2,8 2,8 2,8 2,8 2,8 2,8
525 1,9 1,9 1,9 1,9 1,9 1,9 1,9 1,9 1,9
540
600
650
700
750
800
SHELL TEST 29,4 30,0 27,6 27,6 30,0 30,0 30,0 30,0 30,0 28,5 28,5 28,5
SEAT TEST 21,6 22,0 20,2 20,2 22,0 22,0 22,0 22,0 22,0 20,9 20,9 20,9
- 29 to 38 51,1 51,7 47,9 47,9 51,7 51,7 51,7 51,7 51,7 49,6 49,6 49,6
50 50,1 51,7 47,3 47,6 51,7 51,1 51,2 51,7 51,7 47,8 48,1 48.4
100 46,4 51,5 45,1 46,6 51,5 48,8 49,0 51,5 51,5 40,9 42,2 43,5
150 45,2 50,2 44,0 45,0 50,2 46,4 46,6 50,2 50,2 36,3 38,5 40,5
200 43,8 48,8 42,7 44,2 48,8 45,5 44,8 48,8 48,8 32,8 35,7 38,4
250 41,7 46,3 40,6 43,1 46,3 44,5 44,2 46,3 46,3 30,5 33,4 36,2
300 38,7 42,4 37,7 42,0 42,4 42,4 42,4 42,4 42,4 29,1 31,6 34,4
350 37,0 40,2 36,0 40,2 40,2 40,2 40,2 40,2 40,2 28,1 30,4 32,9
400 34,5 34,5 36,6 36,6 36,6 36,6 36,6 36,6 27,7 29,1 31,8
300 425 28,8 28,8 35,1 35,1 35,1 35,1 34,5 35,1 27,2 28,7 31,5
450 20,0 20,0 33,8 33,8 33,8 33,8 30,9 33,8 26,9 28,1 30,8
(PN 50) 500 8,8 8,8 24,1 27,1 27,8 27,8 20,3 27,5 26,1 26,8 27,8
525 5,2 5,2 15,0 18,8 23,0 21,9 15,4 22,6 23,9 26,3 25,8
540 10,7 13,9 12,8 16,4 11,7 17,0 21,8 25,0 25,0
600 5,9 7,6 6,5 7,2 16,7 21,4 21,4
650 3,0 3,5 10,5 14,1 11,6
700 6,0 9,9 6,7
750 3,7 5,9 4,0
800 2,1 3,5 2,6
SHELL TEST 76,7 77,6 71,9 71,9 77,6 77,6 77,6 77,6 77,6 74,4 74,4 74,4
SEAT TEST 56,2 56,9 52,7 52,7 56,9 56,9 56,9 56,9 56,9 54,6 54,6 54,6
- 29 to 38 102,1 103,4 95,7 95,8 103,4 103,4 103,4 103,4 103,4 99,2 99,3 99,3
50 100,2 103,4 94,6 95,3 103,4 102,3 102,4 103,4 103,4 95,7 96,3 96,8
100 92,8 103,1 90,2 93,2 103,1 97,5 98,1 103,1 103,1 81,8 84,4 86,9
150 90,5 100,4 87,9 89,8 100,4 92,7 93,3 100,4 100,4 72,7 77,0 81,0
200 87,6 97,6 85,4 88,4 97,6 91,0 89,7 97,6 97,6 65,5 71,3 76,8
250 83,4 92,7 81,2 86,2 92,7 88,9 88,4 92,7 92,7 61,1 66,8 72,4
300 77,5 84,9 75,4 84,1 84,9 84,9 84,9 84,9 84,9 58,1 63,3 68,9
350 73,9 80,5 71,9 80,5 80,5 80,5 80,5 80,5 80,5 56,1 60,8 65,8
400 69,0 69,0 73,2 73,2 73,2 73,2 73,2 73,2 54,9 58,2 63,5
600 425 57,5 57,5 70,2 70,2 70,2 70,2 69,0 70,2 54,3 57,3 62,9
450 40,1 40,1 67,6 67,6 67,6 67,6 61,8 67,6 53,7 56,2 61,5
(PN 100) 500 17,6 17,6 48,1 54,1 55,6 55,6 40,5 55,0 52,1 53,7 55,6
525 10,4 10,4 30,1 37,6 40,5 43,8 30,8 45,2 47,8 52,6 51,6
540 6,5 6,5 21,4 27,9 25,5 32,7 23,4 34,0 43,6 49,9 49,9
600 11,8 15,3 13,1 14,4 33,4 42,9 42,9
650 4,6 7,3 6,0 7,0 21,0 28,2 23,2
700 12,0 19,9 13,5
750 7,3 11,0 8,0
800 4,1 7,0 5,2
SHELL TEST 153,2 155,1 143,6 143,7 155,1 155,1 155,1 155,1 155,1 148,8 149,0 149,0
SEAT TEST 112,3 113,7 105,3 105,4 113,7 113,7 113,7 113,7 113,7 109,1 109,2 109,2
NOTES
(a) Permissible, but not recommended for prolonged usage above 427 °C (800 °F) (f) Not to be used over 454 °C (850 °F)
(b) Not to be used over 343 °C (650 °F) (g) At temperature over 538 °C (1000 °F), use only when carbon content is 0,04 or higher
(c) Permissible, but not recommended for prolonged usage above 454 °C (850 °F) (h) Permissible, but not recommended for prolonged usage above 468 °C (875 °F)
(d) Permissible, but not recommended for prolonged usage above 593 °C (1100 °F) (j) Not be used over 538 °C (1000 °F)
(e) Not to be used over 427 °C (800 °F) (m)Not be used over 593 °C (1100 °F)
126
PRESSURE-TEMPERATURE RATINGS VALVOSIDER
ASME B16.34 MANUFACTURER OF VALVES
WCB(a) WCC(a) LCB(b) WC1(h) WC4(j) WC6(m) WC9(m) C5 C12 CF3(e) CF8M(g) CF8C(g)
LCC(b) LC1(b) WC5 CF8(g) CF3M(f)
MATERIALS
LC2(b)
LC3(b)
TEMPERATURE
CLASS Working pressure (bars)
°C
- 29 to 38 153,2 155,2 143,6 143,6 155,2 155,1 155,1 155,2 155,2 148,9 148,9 148,9
50 150,2 155,2 141,9 142,9 155,2 153,4 153,6 155,2 155,2 143,5 144,4 144,4
100 139,1 154,6 135,3 139,8 154,6 146,3 147,1 154,6 154,6 122,6 126,6 130,4
150 135,7 150,6 131,9 134,9 150,6 139,1 139,9 150,6 150,6 109,0 115,5 121,5
200 131,5 146,4 128,0 132,6 146,4 136,4 134,5 146,4 146,4 98,3 107,0 115,3
250 125,2 139,0 121,8 129,2 139,0 133,4 132,7 139,0 139,0 91,6 100,2 108,6
300 116,2 127,3 113,1 126,1 127,3 127,3 127,3 127,3 127,3 87,2 94,9 103,3
350 110,9 120,7 107,9 120,7 120,7 120,7 120,7 120,7 120,7 84,2 91,3 98,7
400 103,5 103,5 109,8 109,8 109,8 109,8 109,8 109,8 82,4 87,3 95,3
900 425 86,3 86,3 105,3 105,3 105,3 105,3 103,5 105,3 81,5 86,0 94,4
450 60,1 60,1 101,4 101,4 101,4 101,4 92,7 101,4 80,6 84,2 92,3
(PN 150) 500 26,4 26,4 72,2 81,2 83,4 83,4 60,8 82,5 78,2 80,5 83,4
525 15,5 15,5 45,1 56,4 60,8 65,8 46,3 67,8 71,6 78,9 77,4
540 9,8 9,8 32,1 41,8 38,3 49,1 35 50,9 65,4 74,9 74,9
600 17,6 22,9 19,6 21,5 50,1 64,3 64,3
650 7,0 11,0 9,0 10,4 31,6 42,4 34,7
700 17,9 29,8 20,2
750 11,0 17,6 12,1
800 6,2 10,5 7,5
SHELL TEST 229,8 232,8 215,4 215,4 232,8 232,7 232,7 232,8 232,8 223,4 223,4 223,4
SEAT TEST 168,5 170,7 158,0 158,0 170,7 170,6 170,6 170,7 170,7 163,8 163,8 163,8
- 29 to 38 255,3 258,6 239,4 239,4 258,6 258,6 258,6 258,6 258,6 248,1 248,1 248,2
50 250,4 258,6 236,5 238,2 258,6 255,7 256 258,6 258,6 239,2 240,6 241,9
100 231,9 257,7 225,5 233,0 257,7 243,8 242,2 257,7 257,7 204,4 211,0 217,3
150 226,1 251,0 219,8 224,8 251,0 231,9 233,2 251,0 251,0 181,7 192,5 202,5
200 219,1 243,9 213,4 221,0 243,9 227,4 224,2 243,9 243,9 163,8 178,4 192,1
250 208,6 231,7 202,9 215,4 231,7 222,3 221,1 231,7 231,7 152,7 166,9 181,0
300 193,7 212,1 188,5 210,1 212,1 212,1 212,1 212,1 212,1 145,3 158,1 172,2
350 184,8 201,2 179,8 201,1 201,2 201,2 201,2 201,2 201,2 140,3 152,1 164,5
400 172,5 172,5 182,9 182,9 182,9 182,9 182,9 182,9 137,3 145,6 158,8
1500 425 143,8 100,2 175,5 175,5 175,5 175,5 172,5 175,5 135,8 143,3 157,3
450 100,2 100,2 169,0 169,0 169,0 169,0 154,5 169,9 134,3 140,4 153,8
(PN 250) 500 44,0 44,0 120,3 135,3 139,0 139,0 101,3 137,5 130,3 134,1 139,0
525 16,3 25,9 75,2 94,0 101,3 109,6 77,1 113 119,4 131,5 129,0
540 16,3 16,3 53,5 69,7 63,8 81,8 58,4 84,9 109,1 124,8 124,8
600 29,4 38,2 32,6 35,9 83,6 107,2 107,2
650 11,6 18,3 15,0 17,4 52,6 70,6 57,9
700 29,9 49,7 33,7
750 18,3 29,4 20,1
800 10,3 17,5 13,1
SHELL TEST 383,0 387,9 359,1 359,1 387,9 387,9 387,9 387,9 387,9 372,2 372,2 372,3
SEAT TEST 280,8 284,5 263,3 263,3 284,5 284,5 284,5 284,5 284,5 272,9 272,9 273,0
- 29 to 38 425,5 431,0 398,9 399,0 431,0 431,0 431,0 431,0 431,0 413,5 413,6 413,6
50 417,3 431,0 393,7 397,1 431,0 426,2 426,7 430,9 430,9 398,6 401,0 403,2
100 386,5 429,5 388,3 429,5 429,5 406,4 109,7 429,5 429,5 340,7 351,7 362,2
150 376,9 419,3 366,3 374,6 418,3 386,4 388,6 418,3 418,3 302,8 320,9 337,5
200 365,2 406,6 355,6 368,3 406,6 379,0 373,7 406,6 406,6 273,0 297,3 320,2
250 347,7 386,1 338,2 359,0 386,1 370,6 368,5 386,1 386,1 254,5 278,2 301,7
300 322,8 353,5 314,2 350,2 353,5 353,5 353,5 353,5 353,5 242,1 263,6 287,0
350 308,0 335,3 299,7 335,2 335,3 335,3 335,3 335,3 335,3 233,8 253,8 274,2
400 287,5 287,5 304,9 304,9 304,9 304,9 304,9 304,9 228,9 242,6 264,7
2500 425 239,6 239,6 292,5 292,5 292,5 292,5 287,5 292,5 226,4 238,9 262,2
450 166,9 166,9 281,7 281,7 281,7 281,7 257,6 281,7 223,9 234,0 256,3
(PN 420) 500 73,3 73,3 200,6 225,4 231,6 231,6 168,9 229,1 217,2 223,6 231,6
525 43,2 43,2 125,4 156,6 168,9 182,7 128,5 188,3 199,0 214,9 214,9
540 27,2 27,2 89,2 116,1 106,4 136,4 97,3 141,5 181,8 208,0 208,0
600 49,0 63,6 54,4 59,8 139,3 178,6 178,6
650 19,3 30,4 25,1 29,0 87,6 117,1 96,5
700 49,8 82,9 56,1
750 30,4 49,0 33,5
800 17,1 29,2 21,9
SHELL TEST 638,3 646,5 598,4 398,5 646,5 646,5 646,5 646,5 646,5 620,3 620,4 620,4
SEAT TEST 468,1 474,1 438,8 438,1 474,1 474,1 474,1 474,1 474,1 454,9 455,0 455,0
NOTES
(a) Permissible, but not recommended for prolonged usage above 427 °C (800 °F) (f) Not to be used over 454 °C (850 °F)
(b) Not to be used over 343 °C (650 °F) (g) At temperature over 538 °C (1000 °F), use only when carbon content is 0,04 or higher
(c) Permissible, but not recommended for prolonged usage above 454 °C (850 °F) (h) Permissible, but not recommended for prolonged usage above 468 °C (875 °F)
(d) Permissible, but not recommended for prolonged usage above 593 °C (1100 °F) (j) Not be used over 538 °C (1000 °F)
(e) Not to be used over 427 °C (800 °F) (m)Not be used over 593 °C (1100 °F)
127
VALVOSIDER DIN FLANGES DIMENSIONS
MANUFACTURER OF VALVES DN 10 ÷ DN 300
f
DN = Nominal pipe size
D = Outside diameter of flange
b
b = Thickness of flange min.
C = Diameter of hub
C h = Height of raised face
h
A f = Diameter of bolt holes
D
PN DN D b C h N° f A PN DN D b C h N° f A
6 10 75 12 35 2 4 11 50 6 100 210 16 148 3 4 18 170
10-16 10 90 14 40 2 4 14 60 10-16 100 220 20 158 3 8 18 180
25-40 10 90 16 40 2 4 14 60 25-40 100 235 24 162 3 8 22 190
64-100 10 100 20 40 2 4 14 70 64 100 250 30 162 3 8 26 200
160 10 100 20 40 2 4 15 70 160 100 265 40 162 3 8 30 210
250 10 125 24 40 2 4 18 85 250 100 300 54 162 3 8 34 235
6 15 80 12 40 2 4 11 55 100 125 265 36 162 3 8 30 210
10-16 15 95 14 45 2 4 14 65 6 125 240 18 178 3 8 18 200
25-40 15 95 16 45 2 4 14 65 10-16 125 250 22 188 3 8 18 210
64-100 15 105 20 45 2 4 14 75 25-40 125 270 26 188 3 8 26 220
160 15 105 20 45 2 4 15 75 64 125 295 34 188 3 8 30 240
250 15 130 26 45 2 4 18,5 90 100 125 315 40 188 3 8 33 250
6 20 90 14 50 2 4 11 65 160 125 315 44 188 3 8 33 250
10-16 20 105 16 58 2 4 14 75 250 125 340 60 188 3 12 41 275
25-40 20 105 18 58 2 4 14 75 6 150 265 18 202 3 8 18 225
64-100 20 130 24 58 2 4 18 90 10-16 150 285 22 212 3 8 22 240
6 25 100 14 60 2 4 11 75 25-40 150 300 28 218 3 8 26 250
10-16 25 115 16 68 2 4 14 85 64 150 345 36 218 3 8 33 280
25-40 25 115 18 68 2 4 14 85 100 150 355 44 218 3 12 33 290
64-100 25 140 24 68 2 4 18 100 160 150 355 50 218 3 12 33 290
160 25 140 24 68 2 4 18 100 250 150 390 68 218 3 12 48 320
250 25 150 28 68 2 4 19 105 6 175 295 20 232 3 8 18 255
6 32 120 14 70 2 4 14 90 10-16 175 315 24 242 3 8 22 270
10-16 32 140 16 78 2 4 18 100 25 175 330 28 248 3 12 26 280
25-40 32 140 18 78 2 4 18 100 40 175 350 32 260 3 12 30 295
64-100 32 155 24 78 2 4 22 110 64 175 375 40 260 3 12 33 310
6 40 130 14 80 3 4 14 100 100 175 385 48 260 3 12 33 320
10-16 40 150 16 88 3 4 18 110 160 175 390 54 260 3 12 36 320
25-40 40 150 18 88 3 4 18 110 250 175 430 74 260 3 12 50 355
64-100 40 170 26 85 3 4 22 125 6 200 320 20 258 3 8 18 280
160 40 170 28 88 3 4 22 125 10 200 340 24 268 3 8 22 295
250 40 185 34 88 3 4 25 135 16 200 340 24 268 3 12 22 295
6 50 140 14 90 3 4 14 110 25 200 360 30 278 3 12 26 310
10-16 50 165 18 102 3 4 18 125 40 200 375 34 285 3 12 30 320
25-40 50 165 20 102 3 4 18 125 64 200 415 42 285 3 12 36 345
64 50 180 26 102 3 4 22 135 100 200 430 52 285 3 12 36 360
100 50 195 28 102 3 4 26 145 160 200 430 60 285 3 12 36 360
160 50 195 30 102 3 4 26 145 250 200 485 82 285 3 12 57 400
250 50 200 38 102 3 5 26 150 6 250 375 22 312 3 12 18 335
6 65 160 14 110 3 4 14 130 10 250 395 26 320 3 12 22 350
10-16 65 185 18 122 3 4 18 145 16 250 405 26 320 3 12 26 355
25-40 65 185 22 122 3 8 18 145 25 250 425 32 335 3 12 30 370
64 65 205 26 120 3 8 22 160 40 250 450 38 345 3 12 33 385
100 65 220 30 120 3 8 26 170 64 250 470 46 345 3 12 36 400
160 65 220 34 122 3 8 26 180 100 250 505 60 345 3 12 39 430
250 65 230 42 122 3 8 30 180 160 250 515 68 345 3 12 42 430
6 80 190 16 128 3 4 18 150 250 250 585 100 345 3 16 72 490
10 80 200 20 138 3 8 18 160 6 300 440 22 365 4 12 22 395
16 80 200 20 138 3 8 18 160 10 300 445 26 370 4 12 22 400
25-40 80 200 24 138 3 8 18 160 16 300 460 28 378 4 12 26 410
64 80 215 28 138 3 8 22 170 25 300 485 34 390 4 16 30 430
100 80 230 32 138 3 8 24 180 40 300 515 42 410 4 16 33 450
160 80 230 36 138 3 8 40 180 64 300 530 52 410 4 16 36 460
250 80 255 46 138 3 8 31 200 100 300 585 68 410 4 16 42 500
160 300 585 78 410 4 16 42 500
250 300 690 120 410 4 16 90 590
128
DIN FLANGES DIMENSIONS VALVOSIDER
DN 350 ÷ DN 1200 MANUFACTURER OF VALVES
f
DN = Nominal pipe size
D = Outside diameter of flange
b = Thickness of flange min.
b
C = Diameter of hub
C h = Height of raised face
h
A f = Diameter of bolt holes
D
PN DN D b C h N° f A PN DN D b C h N° f A
6 350 490 22 415 4 12 22 445 6 700 860 24 775 5 24 25 810
10 350 505 26 430 4 16 22 460 10 700 895 30 800 5 24 30 840
16 350 520 30 438 4 16 26 470 16 700 910 42 795 5 24 36 840
25 350 555 38 450 4 16 33 490 25 700 960 50 820 5 24 42 875
40 350 580 46 465 4 16 36 510 40 700 995 64 840 5 24 48 900
64 350 600 56 465 4 16 39 525 64 700 1045 84 840 5 24 56 935
100 350 655 74 465 4 16 48 560 100 700 1145 120 840 5 24 70 1020
6 400 540 22 465 4 16 22 495 6 800 975 24 880 5 24 30 920
10 400 565 26 482 4 16 26 515 10 800 1015 32 905 5 24 33 950
16 400 580 32 490 4 16 30 525 16 800 1025 42 900 5 24 39 950
25 400 620 40 505 4 16 36 550 25 800 1085 64 930 5 24 48 990
40 400 660 50 535 4 16 39 585 40 800 1165 72 960 5 24 62 1050
64 400 670 60 535 4 16 42 585 64 800 1165 92 960 5 24 62 1050
100 400 715 78 535 4 16 48 620 100 800 n .a n .a n .a n .a n .a n .a n .a
6 450 595 22 520 4 16 22 550 6 900 1075 26 980 5 24 30 1020
10 450 615 26 532 4 20 26 565 10 900 1115 34 1005 5 28 33 1050
16 450 640 32 550 4 20 30 585 16 900 1125 44 1000 5 28 39 1050
25 450 670 40 555 4 20 36 600 25 900 1185 68 1030 5 28 48 1090
40 450 685 50 560 4 20 39 610 40 900 1250 78 1070 5 28 56 1140
64 450 715 64 560 4 20 42 630 64 900 1285 98 1070 5 28 62 1170
100 450 770 86 560 4 20 48 675 100 900 n .a n .a n .a n .a n .a n .a n .a
6 500 645 24 570 4 20 22 600 6 1000 1175 26 1080 5 28 30 1120
10 500 670 28 585 4 20 26 620 10 1000 1230 34 1110 5 28 36 1160
16 500 715 36 610 4 20 33 650 16 1000 1255 46 1115 5 28 42 1170
25 500 730 44 615 4 20 36 660 25 1000 1320 62 1140 5 28 56 1210
40 500 755 52 615 4 20 42 670 40 1000 1360 80 1180 5 28 56 1250
64 500 800 68 615 4 20 48 705 64 1000 1415 108 1180 5 28 70 1290
100 500 870 94 615 4 20 56 760 100 1000 n .a n .a n .a n .a n .a n .a n .a
6 600 755 24 670 5 20 26 705 6 1200 1405 28 1295 5 32 33 1340
10 600 780 28 685 5 20 30 725 10 1200 1455 38 1330 5 32 39 1380
16 600 840 40 725 5 20 36 770 16 1200 1485 52 1330 5 32 48 1390
25 600 845 46 720 5 20 39 770 25 1200 1530 70 1350 5 32 56 1420
40 600 890 54 735 5 20 48 795 40 1200 1575 88 1380 5 32 62 1460
64 600 930 76 735 5 20 56 820 64 1200 1665 126 1380 5 32 78 1530
100 600 990 104 735 5 20 62 875 100 1200 n .a n .a n .a n .a n .a n .a n .a
FLANGES - TYPES OF CONTACT SURFACES - DIN 2526
FLANGES WITH RAISED FACE FLANGES WITHOUT RAISED FACE
NOMINAL ROUGHNESS GRADES (Ra)

Type A - Contact face without stipulation Rz (µm)
Ra (µm)
Type B - Contact face Rz = 160, turned (not finer than 40 micron) 1 .6 16

3 .2 25
6 .3 40
Type C - Raised face Rz = 160 (not finer than 40 micron), turned 12 .5 100
25 160
Type D - Raised face Rz = 40, turned ROUGHNESS PROFILE
Rz Ra
Type E - Raised face Rz = 16, turned
MIDDLE LINE
129
VALVOSIDER
FLANGES FACINGS - DIN 2526
b b
d1
d3
d2
d4
d1
d3
d2
g
g
TYPE F - TYPE N - TYPE V 14 - TYPE R 14 -

Tongue according Groove according Male-faced Female-facing
to DIN 2512 to DIN 2512 according according
b g b to DIN 2514 to DIN 2514
g g1
d
20
d1
d2
°
g
TYPE V 13 - TYPE R 13 -
Male-faced Female-facing
according according b
b g b to DIN 2513
to DIN 2513 TYPE M - Bevel for diaphragm
TYPE L - Recess for lenticular seal seal welding according to
according to DIN 2696 DIN 2695
DIMENSIONS OF FACING
DIN 2513 DIN 2512 DIN 2514 LENTICULAR SEAL
DIN 2696
DN PN 6 PN 10 PN 6 PN 10 DN PN 10 40 PN 64 : 250 DN
g g
d1 d2 d1 d2 d1 d2 d3 d4 d1 d2 d3 d4 d1 d2 d3 g g1 r d
10 30 31 34 35 4 30 31 22 21 34 35 24 23 4 10 - - - - - - 18 10
15 35 36 39 40 4 35 36 27 26 39 40 29 28 4 15 - - - - - - 24 15
20 42 43 50 51 4 42 43 32 31 50 51 36 35 4 20 35 36 51 4 2 2,5 30 20
25 49 50 57 58 4 49 50 39 38 57 58 43 42 4 25 42 43 58 4 2 2,5 35 25
32 61 62 65 66 4 61 62 49 48 65 66 51 50 4 32 50 51 66 4 2 2,5 43 32
40 68 69 75 76 4 68 69 56 55 75 76 61 60 4 40 60 61 76 4 2 2,5 51 40
50 81 82 87 88 4 81 82 69 68 87 88 73 72 4 50 72 73 88 4 2 2,5 63 50
65 101 102 109 110 4 101 102 89 88 109 110 95 94 4 65 94 95 110 4 2 2,5 85 65
80 117 118 120 121 4 117 118 103 102 120 121 106 105 4 80 105 106 121 4 2 2,5 97 80
100 137 138 149 150 4,5 137 138 123 122 149 150 129 128 4,5 100 128 129 150 4,5 2,5 3 124 100
125 165 166 175 176 4,5 165 166 149 148 175 176 155 154 4,5 125 154 155 176 4,5 2,5 3 153 125
150 192 193 203 204 4,5 192 193 176 175 203 204 183 182 4,5 150 182 183 204 4,5 2,5 3 181 150
175 222 223 233 234 4,5 222 223 206 205 233 234 213 212 4,5 175 212 213 234 4,5 2,5 3 218 175
200 249 250 259 260 4,5 249 250 231 230 259 260 239 238 4,5 200 238 239 260 4,5 2,5 3 243 200
250 304 305 312 313 4,5 304 305 286 285 312 313 292 291 4,5 250 291 292 313 4,5 2,5 3 298 250
300 354 355 363 364 4,5 354 355 336 335 363 364 343 342 4,5 300 342 343 364 4,5 2,5 3 345 300
350 401 402 421 422 5 401 402 381 380 421 422 395 394 5 350 394 395 422 5 3 3,5 394 350
400 451 452 473 474 5 451 452 431 430 473 474 447 446 5 400 446 447 474 5 3 3,5 445 400
450 505 506 523 524 5 505 506 481 480 523 524 497 496 5 450 496 497 524 5 3 3,5 450
500 555 556 575 576 5 555 556 531 530 575 576 549 548 5 500 548 549 576 5 3 3,5 500
600 655 656 675 676 5 655 656 631 630 675 676 649 648 5 600 648 649 676 5 3 3,5 600
700 760 761 777 778 5 760 761 736 735 777 778 751 750 5 700 750 751 778 5 3 3,5 700
800 865 866 882 883 5 865 866 841 840 882 883 856 855 5 800 855 856 883 5 3 3,5 800
900 965 966 987 988 5 965 966 941 940 987 988 961 960 5 900 960 961 988 5 3 3,5 900
1000 1062 1063 1091 1092 6 1062 1063 1036 1035 1091 1092 1061 1060 6 1000 1060 1061 1092 6 3 4 1000
130
VALVE WELDING ENDS - DIN 3239 VALVOSIDER
Part 1 - Butt ends | Part 2 - Socket ends MANUFACTURER OF VALVES
N o m in a l B u tt W e ld in g e n d s fo r p ip e s o f WELDING
s iz e s e r ie s 1 s e r ie s 2 s e r ie s 3 s e r ie s 4 s e r ie s 5 s e r ie s 6 * ) s e r ie s 7 s e r ie s 8
DN (u p to P N 4 0 ) (P N 6 3 ) (P N 1 0 0 ) (P N 1 6 0 ) (P N 2 5 0 ) (P N 3 2 0 ) (P N 4 0 0 ) (P N 6 3 0 ) SOCKET CONNECTIONS
d1 20 U se 20 20 24
d2 U s e s e r ie s 4 18 s e r ie s 6 18 18 22
10 d3 w e ld in g e n d s 1 7 ,2 w e ld in g 1 7 ,2 1 7 ,2 2 1 ,3
dp 13 ends 12 10 1 1 ,5
s 2 ,0 2 ,6 3 ,6 5 ,0
d1 24 24 24 31 37
d2 U s e s e r ie s 4 22 22 22 28 34
15 d3 w e ld in g e n d s 2 1 ,3 2 1 ,3 2 1 ,3 2 6 ,9 3 3 ,7
dp 17 16 15 17 1 8 ,5
s 2 ,0 2 ,6 3 ,2 5 ,0 8 ,0
d1 31 -- -- -- -- -- -- -- DIN 3239 - Part 2
d2 28 -- -- -- -- -- -- --
20 d3 2 6 ,9 -- -- -- -- -- -- --
dp 22 -- -- -- -- -- -- --
s 2 ,3 -- -- -- -- -- -- --
d1 37 37 39 39 48 54
d2 U s e s e r ie s 3 34 34 35 35 44 49 permissible deviation
25 d3 w e ld in g e n d s 3 3 ,7 3 3 ,7 3 3 ,7 3 3 ,7 4 2 ,4 4 8 ,3
dp 2 8 ,5 27 2 0 ,5 24 29 25 20° from end face
s 2 ,6 3 ,2 3 ,6 5 ,0 7 ,1 1 2 ,5
d1 54 54 54 54 67 67
d2 U s e s e r ie s 3 49 49 49 49 61 77
40 d3 w e ld in g e n d s 4 8 ,3 4 8 ,3 4 8 ,3 4 8 ,3 6 0 ,3 7 6 ,1
dp 43 41 3 8 ,5 36 40 4 3 ,5
s 2 ,6 3 ,6 5 ,0 6 ,3 1 1 ,0 1 7 ,5
d1 67 67 67 83 83 96
d2 U s e s e r ie s 3 61 61 61 77 77 90
50 d3 w e ld in g e n d s 6 0 ,3 6 0 ,3 6 0 ,3 7 6 ,1 7 6 ,1 8 8 ,9 d1
dp 54 5 2 ,5 45 5 9 ,5 4 9 ,5 5 1 ,5 da
s 3 ,2 4 ,0 8 ,0 8 ,8 1 4 ,2 2 0 ,0
d1 83 83 83 96 121 --
d2 U s e s e r ie s 3 77 77 77 90 115 --
65 d3 w e ld in g e n d s 7 6 ,1 7 6 ,1 7 6 ,1 8 8 ,9 1 1 4 ,3 -- t
dp 69 85 5 9 ,5 68 81 --
s 3 ,6 5 ,6 8 ,8 1 1 ,0 1 7 ,5 --
d1 96 96 121 121 121 --
d2 U s e s e r ie s 3 90 90 115 115 115 --
80 d3 w e ld in g e n d s 8 8 ,9 8 8 ,9 1 1 4 ,3 1 1 4 ,3 1 1 4 ,3 --
dp 81 7 6 ,5 93 8 7 ,5 81 --
s 4 ,0 6 ,3 1 1 ,0 1 4 ,2 1 7 ,5 --
d1 121 121
d2 U s e s e r ie s 3 115 115 da = min. socket ext. diameter
100 d3 w e ld in g e n d s 1 1 4 ,3 1 1 4 ,3
dp 104 9 6 ,5
s 5 ,0 8 ,0 d1 = socket bore diameter
d1 147 147 147
d2 U s e s e r ie s 2 141 141 141 t = depth of socket
125 d3 w e ld in g e n d s 1 3 9 ,7 1 3 9 ,7 1 3 9 ,7
dp 1 3 0 ,5 127 1 2 0 ,5 DIN 3239 - Part 1
s 4 ,5 6 ,3 1 0 ,0
d1 176 176 176
150
d2
d3
U s e s e r ie s 2
w e ld in g e n d s
170
1 6 8 ,3
170
1 6 8 ,3
170
1 6 8 ,3
Type 1
Associated outside
dp 1 5 6 ,5 154 1 4 4 ,5
diameter of pipe
Nominal
s 5 ,6 7 ,1 1 2 ,5
width
d1 228 228 228

d2 U s e s e r ie s 2 222 222 222 da min.
200 d3 w e ld in g e n d s 2 1 9 ,1 2 1 9 ,1 2 1 9 ,1 di t
dp 2 0 4 ,5 1 9 9 ,5 169
30° max
Series
s 7 ,1 10 1 6 ,0
d1 282 282 282
d2 276 276 276
250 d3 273 273 273 S DN 4 5 6
dp 2 5 6 ,5 255 2 4 8 ,5 20° max
s 8 ,0 8 ,8 1 2 ,5 6 17 17 17 11 10,2 10
d1 331 331 331
d3 2)
d2 325 325 325 8 21 21 22 14 13,5 10

300 d3 3 2 3 ,9 3 2 3 ,9 3 2 3 ,9
dp 3 0 6 ,5 301 2 9 5 ,5 d1 d2 dp 10 24 24 26 18 17,2 10
s 8 ,0 1 1 ,0 1 4 ,2 1)
d1 365 365 365
15 29 32 34 22 21,3 10
350
d2 359 359 359 S = wall thickness 20 35 38 41 27,5 26,9 13
d3 3 5 5 ,6 3 5 5 ,6 3 5 5 ,6 d2 = pipe external diameter
dp 3 3 6 ,5 330 324 25 42 46 50 34,5 33,7 13
s 8 ,8 1 2 ,5 1 6 ,0 dp = d2 - 2S (pipe int. diameter)
d1 417 417 32 52 55 59 43 42,4 13
d2 411 411 1) d1 is the maximum permissible major diameter,
400 d3 4 0 6 ,4 4 0 6 ,4 40 57 62 68 49 48,3 13
generally applicable for steel castings or malleable
dp 383 377 50 71 75 83 61,5 60,3 16
s 11 1 4 ,2 cast iron components suitable for welding.
d1 518 2) d3 is the major diameter of the associated series 1 65 90 100 110 77 76,1 16
d2 512 steel pipe as specified in ISO 4200 - 1985.
500 d3 508 80 100 120 130 90 88,9 16
dp 478 *) Welding neck flanges are not suitable for use with
s 1 4 ,2 piping systems rated for PN 320 and PN 630. 100 135 150 165 115,5 114,3 20
131
VALVOSIDER
EN 10213-2 - MATERIALS SPECIFICATIONS
Designation Chemical composition (cast analysis) (% min.)

Name Number C Si max Mn P max S max Cr Mo Ni others
GP240GH 1.0619 0,18 to 0,23 0,60 0,50 to 1,20 0,030 0,020 1) -- -- -- --
G20Mo5 1.5419 0,18 to 0,23 0,60 0,50 to 1,00 0,025 0,020 1) -- 0,40 to 0,60 -- --
G17CrMo5-5 1.7357 0,15 to 0,20 0,60 0,50 to 1,00 0,020 0,020 1) 1,00 to 1,50 0,45 to 0,65 -- --
G17CrMo9-10 1.7379 0,13 to 0,20 0,60 0,50 to 0,90 0,020 0,020 1) 2,00 to 2,50 0,90 to 1,20 -- --
GX15CrMo5 1.7365 0,12 to 0,19 0,80 0,50 to 0,80 0,025 0,025 4,00 to 6,00 0,45 to 0,65 -- --
G20Mn5 1.6220 0,17 to 0,23 0,60 1,00 to 1,60 0,020 0,020 1) -- -- 0,80 max --
G9Ni10 1.5636 0,06 to 0,12 0,60 0,50 to 0,80 0,020 0,015 -- -- 2,00 to 3,00 --
G9Ni14 1.5638 0,06 to 0,12 0,60 0,50 to 0,80 0,020 0,015 -- -- 3,00 to 4,00 --
GX5CrNi19-10 2) 1.4308 2) 0,07 max 1,50 1,50 0,040 0,030 18,00 to 20,00 -- 8,00 to 11,00 --
GX5CrNiNb19-11 2) 1.4552 2) 0,07 max 1,50 1,50 0,040 0,030 18,00 to 20,00 -- 9,00 to 12,00 Nb: 8 x C, max: 1,00
GX5CrNiMo19-11-2 2) 1.4408 2) 0,07 max 1,50 1,50 0,040 0,030 18,00 to 20,00 2,00 to 2,50 9,00 to 12,00 --
GX5CrNiMoNb19-11-2 2) 1.4581 2) 0,07 max 1,50 1,50 0,040 0,030 18,00 to 20,00 2,00 to 2,50 9,00 to 12,00 Nb: 8 x C, max: 1,00
GX2CrNiMoN22-5-3 1.4470 0,03 max 1,00 2,00 0,035 0,025 21,00 to 23,00 2,50 to 3,50 4,50 to 6,50 N: 0,12 to 0,20
1) For castings of ruling thickness <28 mm, % 0,030 S is permitted
2) It should be pointed out that the suggested chemical composition ranges of these alloyed corrosion resistant steel grades are rather large. According to the final
destination (high temperature/low temperature, etc…) it may be advisable for the founder to aim for narrower ranges for different elements in order to achieve the most
suitable structures.
MECHANICAL PROPERTIES
Designation Heat treatment °C Test at room temperature Test at elevated temperature
Impact
Normalizing Tempering Tensile test test Tensile test
Name Number Symbol 2) (+ N) or (+T) Rp0,2 Rm A KV Rp0,2 Mpa *) min at °C
Quenching Mpa *) Mpa *) % J
100° 200° 300° 350° 400° 450° 500° 550°
(+ Q) 1) min min min.
GP240GH 1.0619 + N 900 to 980 -- 240 420 to 600 22 27 210 175 145 135 130 125 -- --
+ QT 890 to 980 600 to 700 240 420 to 600 22 40 210 175 145 135 130 125 -- --
G20Mo5 1.5419 + QT 920 to 980 650 to 730 245 440 to 590 22 27 -- 190 165 155 150 145 135 --
G17CrMo5-5 1.7357 + QT 920 to 960 680 to 730 315 490 to 690 20 27 -- 250 230 215 200 190 175 160
G17CrMo9-10 1.7379 + QT 930 to 970 680 to 740 400 590 to 740 18 40 355 345 330 315 305 280 240
GX15CrMo5 1.7365 + QT 930 to 990 680 to 730 420 630 to 760 16 27 -- 390 380 -- 370 -- 305 250
1) +Q means quenching media: air or liquid. +T = tempering. +N = normalizing
2) If there are alternative specifications for heat treatment, the requested alternative shall be indicated on the order, e.g.: GP240GH +QT1 or 1.0619 +QT1
*) 1 Mpa = 1N/mm 2
Designation Heat treatment °C Test at room temperature Impact test

Tensile strength
Name Number Symbol 1) Quenching Tempering Rp0,2 Rm A KV At

Mpa *) Mpa *) % J °C
min min min.
G20Mn5 1.6220 + N 900 to 980 -- 300 480 to 620 20 27 -30
+ QT 900 to 940 610 to 660 300 500 to 650 22 27 -40
G9Ni10 1.5636 + QT 830 to 890 600 to 650 280 480 to 630 24 27 -70
G9Ni14 1.5638 + QT 820 to 900 590 to 650 360 500 to 650 20 27 -90
1) +Q: quenching in water. +T = tempering. +N = normalizing.
*) 1 Mpa = 1 N/mm 2
Designation Heat treatment Test at room temperature Test at elevated temperature

+ AT 1)
Tensile test Impact test Tensile test
Name Number °C Rp1,0 5) Rm A KV °C 8) Rp1,0 5) Mpa *) min. at °C
Mpa *) Mpa *) % J
100° 200° 300° 350° 400° 500° 550°
min min min.
GX5CrNi19-10 1.4308 1050 to 1150 200 440 to 640 30 60 7) RT 7) 160 125 110 -- -- --
GX5CrNiNb19-11 1.4552 1050 to 1150 200 440 to 640 25 40 RT 165 145 130 -- 120 110 100
GX5CrNiMo19-11-2 1.4408 1080 to 1150 210 440 to 640 30 60 7) RT 7) 170 135 115 -- 105 -- --
GX5CrNiMoNb19-11-2 1.4581 1080 to 1150 210 440 to 640 25 40 RT 185 160 145 -- 130 120 115
GX2CrNiMoN22-5-3 1.4470 1120 to 1150 2) 3) 420 6) 600 to 800 20 30 RT 330 6) 280 6) 4) -- -- -- --
1) The heat treatment for all the steel grades is +AT +QW (solution annealing + water quenching).
2) After solution annealing at high temperature, castings may be cooled down to 1040 °C to 1010 °C prior to water quenching in order to improve corrosion resistance and
prevent cracks in complex shapes.
3) As far as steel castings for pressure vessel are concerned the austenitic-ferritic steel are not considered in their age hardened condition.
4) For similar reasons as those concerning note 3) the austenitic-ferritic steel have not to be used for temperatures higher then 250 °C in pressure vessel applications.
5) Rp0,2 may be estimated by lowering Rp1,0 by 25 Mpa.
6) Rp0,2
7) For use at low temperature impact properties may be agreed and the following applies: Steel number 1.4308 KV J min. 60 at -196 °C.
8) RT = Room temperature. *) 1 Mpa = 1 N/mm 2
132
MATERIALS VALVOSIDER
EQUIVALENCE AND COMPARISON MANUFACTURER OF VALVES
MATERIALS EQUIVALENCE
ASTM EN 10213 EN No. UNS JIS TRADE MARK
A48-40B EN-GJL-250 0.6025
EN-GJS-400-18 0.7043
A216 WCB GP240GH 1.0619 J03002 SCPH2
A352 LCB G20Mn5 1.6220 J03003 SCPL1
A352 LC2
A352 LC3 G9Ni14 1.5638 J31550 SCPL31
A217 WC1 G20Mo5 1.5419 J12524 SCPH11
A217 WC6 G17CrMo5-5 1.7357 J12072 SCPH21
A217 WC9 GS12CrMo9-10 1.7379 J21890 SCPH32-CF
A217 C5 GX15CrMo5 1.7365 (1.7363) J42045 SCPH61
A217 C12 (GX12CrMo10-1) (1.7389) J82090
A351 CF3 X2CrNi19-11 1.4306 J92500 SCS19
A351 CF3M X2CrNiMo17-12-2 1.4409 J92800 SCS16
A351 CF8 GX5CrNiMo19-10 1.4308 J92600 SCS13
A351 CF8C GX5CrNiNb19-11 1.4552 J92710
A351 CF8M GX5CrNiMo19-11-2 1.4408 J92900 SCS14
A351 CF8MC GX5CrNiMoNb19-11-2 1.4581
A351 CG8M
GX2CrNiMoN22-5-3 1.4470
A351 CK3MCuN
A351 CN7M N08007 SCS23
A494 N-12MV N10001 HASTELLOY B ®
A494 CW-12MW N10002 HASTELLOY C ®
A494 M35-1 N04400 MONEL 400 ®
A494 CW-6MC N06625 INCONEL 625 ®
N08825 INCOLOY 825 ®
S31803 SAF 2205 ®
S31254 254 SMO ®
S32550 FERRALIUM 255 ®
MATERIALS COMPARISON
CASTINGS FORGINGS
ASTM EN 10213 EN No. ASTM EN 10213 EN No.
A216 WCB GP240GH (GS-C 25N) 1.0619 A105 (C22.8) 1.0460
A352 LCB G20Mn5 1.6220 A350 LF2 1.0437
A352 LC2
A352 LC3 G9Ni14 1.5638 A350 LF3 1.5637
A217 WC1 G20Mo5 1.5419 A182 F1 1.5415
A217 WC6 G17CrMo5-5 1.7357 A182 F11 14CrMo4-5 1.7335
A217 WC9 GS12CrMo9-10 1.7379 A182 F22 1.7380
A217 C5 GX15CrMo5 1.7365 (1.7363) A182 F5 1.7362
A217 CA15 A182 F6 (X20Cr13) 1.4021
A217 C12 (GX12CrMo10-1) (1.7389) A182 F9 (15CrMo12.1) 1.4920
A351 CF3 GX2CrNi19-11 1.4309 A182 F304L X2CrNi19-11 1.4306
A351 CF3M GX2CrNiMo19-11-2 1.4409 A182 F316L X2CrNiMo17-12-2 1.4404
A351 CF8 GX5CrN19-10 1.4308 A182 F304 X5CrNi18-10 1.4301
A351 CF8C GX5CrNiNb19-11 1.4552 A182 F321 X6CrNiTi18-10 1.4541
A351 CF8C GX5CrNiNb19-11 1.4552 A182 F347 X6CrNiNb18-10 1.4550
A351 CF8M GX5CrNiMo19-11-2 1.4408 A182 F316 X5CrNiMo17-12-2 1.4401
A351 CF8MC GX5CrNiMoNb19-11-2 1.4581 A182 F348 X6CrNiMoNb17-12-2 1.4580
A351 CG8M A182 F317
A351 CK3MCuN A182 F44
A351 CN7M A182 F20
B O L T S - A S M E M A T E R IA L S B O L T S - D IN M A T E R IA L S
BOLTS NUTS M A T E R IA L S BOLTS NUTS
B7 A S T M A 193 B7 2H A S T M A 194 G r.2 H Y C 35 1 .0 5 0 1 C 35 C 35
B 16 A S T M A 193 B 16 G r.4 A S T M A 194 G r.4 YK C K 35 1 .1 1 8 1 C K 35 C 35
L7 A S T M A 320 L7 G r.4 A S T M A 194 G r.4 G 2 4 C rM o 5 1 .7 2 5 8 2 4 C rM o 5 C K 35
B 8M A S T M A 193 B 8M G r.8 M A S T M A 193 G r.8 M GA 2 1 C rM o V 5 7 1 .7 7 0 9 2 1 C rM o V 5 7 2 4 C rM o 5
B8 A S T M A 193 B 8 C L. 1 G r.8 A A S T M A 194 G r.8 A
320 B 8 A S T M A 320 B 8 C L .1 G r.8 A A S T M A 194 G r.8 A A 2 -7 0 A 2 -7 0 A 2 -7 0
307 B A S T M A 307 G r.B A 4 -7 0 A 4 -7 0 A 4 -7 0
B8 A S T M A 193 B 8 C L. 1 2H A S T M A 1 9 4 G r.2 H
All data, subject to technicals changes, are only for information and not for official use.
133
VALVOSIDER
PRESSURE RATINGS TO EN 1092-1
RATING FOR GROUP 3E0 MATERIALS - GP240GH - 1.0619 RATING FOR GROUP 4E0 MATERIALS - G20Mo5 - 1.5419
TEMP. GAUGE WORKING PRESSURE IN BAR TEMP. GAUGE WORKING PRESSURE IN BAR
°C PN 16 PN 25 PN 40 PN 63 PN 100 °C PN 16 PN 25 PN 40 PN 63 PN 100
RT 16,0 25,0 40,0 63,0 100,0 RT 16,0 25,0 40,0 63,0 100,0
100 14,8 23,2 37,1 58,5 92,8 100 16,0 25,0 40,0 63,0 100,0
150 14,0 22,0 35,2 55,5 88,0 150 16,0 25,0 40,0 63,0 100,0
200 13,3 20,8 33,3 52,5 83,3 200 16,0 25,0 40,0 63,0 100,0
250 12,1 19,0 30,4 48,0 76,1 250 15,6 24,4 39,0 61,5 97,6
300 11,0 17,2 27,6 43,5 69,0 300 13,7 21,4 34,2 54,0 85,7
350 10,2 16,0 25,7 40,5 64,2 350 12,9 20,2 32,3 51,0 80,9
400 9,5 14,8 23,8 37,5 59,5 400 11,9 18,6 29,9 47,1 74,7
450 450 11,0 17,2 27,6 43,5 69,0
460 460 10,2 16,0 25,6 40,3 64,0
470 470 9,4 14,7 23,6 37,2 59,1
480 480 8,6 13,5 21,6 34,1 54,2
490 490 7,8 12,3 19,7 31,0 49,2
500 500
RATING FOR GROUP 5E0 MATERIALS - G17CrMo5-5 - 1.7357 RATING FOR GROUP 6E1 MATERIALS - GX15CrMo5 - 1.7365
RT 16,0 25,0 40,0 63,0 100,0 RT 16,0 25,0 40,0 63,0 100,0
100 16,0 25,0 40,0 63,0 100,0 100 16,0 25,0 40,0 63,0 100,0
150 16,0 25,0 40,0 63,0 100,0 150 16,0 25,0 40,0 63,0 100,0
200 16,0 25,0 40,0 63,0 100,0 200 16,0 25,0 40,0 63,0 100,0
250 16,0 25,0 40,0 63,0 100,0 250 16,0 25,0 40,0 63,0 100,0
300 16,0 25,0 40,0 63,0 100,0 300 16,0 25,0 40,0 63,0 100,0
350 15,2 23,8 38,0 60,0 95,2 350 16,0 25,0 40,0 63,0 100,0
400 14,4 22,5 36,0 56,7 90,0 400 16,0 25,0 40,0 63,0 100,0
450 13,4 21,0 33,7 53,1 84,2 450 16,0 25,0 40,0 63,0 100,0
460 12,8 20,0 32,0 50,5 80,2 460
470 12,1 19,0 30,4 47,9 76,1 470
480 11,5 18,0 28,8 45,4 72,0 480
490 10,8 17,0 27,2 42,8 68,0 490
500 500
RATING FOR GROUP 12E0 MATERIALS - GX5CrNiNb 19-11 - 1.4552 RATING FOR GROUP 15E0 MATERIALS - GX5CrNiMoNb 19-11-2 - 1.4581
RT 16,0 25,0 40,0 63,0 100,0 RT 16,0 25,0 40,0 63,0 100,0
100 15,8 24,7 39,6 62,4 99,0 100 16,0 25,0 40,0 63,0 100,0
150 14,9 23,3 37,3 58,8 93,3 150 15,6 24,5 39,2 61,8 98,0
200 14,1 22,1 35,4 55,8 88,5 200 14,9 23,3 37,3 58,8 93,3
250 13,4 21,0 33,7 53,1 84,2 250 14,1 22,1 35,4 55,8 88,5
300 12,7 19,8 31,8 50,1 79,5 300 13,3 20,8 33,3 52,5 83,3
350 12,2 19,1 30,6 48,3 76,6 350 12,8 20,1 32,1 50,7 80,4
400 11,8 18,5 29,7 46,8 74,2 400 12,4 19,5 31,2 49,2 78,0
450 11,6 18,1 29,0 45,7 72,6 450 12,2 19,1 30,6 48,3 76,6
500 11,3 17,7 28,3 44,7 70,9 500 12,0 18,8 30,0 47,4 75,2
550 550 11,9 18,6 29,9 47,1 74,7
560 560 11,8 18,5 29,6 46,6 74,0
134
FLOW DATA VALVOSIDER
FLOW COEFFIECIENT, K V
may be defined as the rate of flow of water in cubic metres per hour, that will generate a pressure drop of one bar across
the valve.
FLOW COEFFIECIENT, C V
may be defined as the rate of flow of water in US gallons per minute, at 60 °F (15,6 °C), that will generate a pressure
drop of one pound-force per square inch across the valve.
BASIC FORMULAS
Liquid flow:
where
2
Q G æ Q ö Q = flow rate in cubic metres per hour;
Kv = ; DP = G ç ÷ G = specific gravity of liquid (water = 1);
( DP) è KV ø DP = pressure drop across valve in bar.
where
2
Q G æ Q ö Q = flow rate in US gal/min;
Cv = ; DP = G ç ÷ G = specific gravity of liquid (water = 1);
( DP) è CV ø DP = pressure drop across valve in lbf/in 2
Gases flow :
where
P1 = inlet pressure (PSIA);
æ ö SG = specific gravity of gas at standard conditions (air = 1);
2
ç W G ÷ T = absolute temperature of gas (-460 °F)
DP = P1 - P - 2 SGT ç
1
÷ WG = Volumetric flow of gas
K V
ç 1360 ÷
è 0.86 ø
Steam flow:
2
where
ææ ö ö W = pound per hour of Steam;
çç1 + 0.0007 TS ÷ ÷ TS = degree of superheat (°F);
DP = P1 - P12 - çç ÷ ·W÷ P1 = inlet pressure
çç 2.1 K V
÷ ÷ DP = pressure drop across valve in lbf/in 2
èè 0.86 ø ø
Each type and size of valve has a particular flow coefficient and the general formulas indicate how a knowledge of this can
be used to establish the pressure drop across a valve for a given flow rate or, alternatively, to determinate the flow rate
through a valve which will generate a given pressure drop.
Flow coefficient values are determined by testing and may not be valid for all conditions of flow.
CAST STEEL VALVES - FLOW COEFFICIENT KV (m3/h) (CV(US gal/minute) = KV/0.86)

Type C la s s N o m in a l d im e n s io n
2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
150 204 510 893 2074 3808 6035 8840 12325 16320 20825 23290 37060
300 204 510 893 2074 3808 6035 8840 11339 15014 19159 21427 34095
G ATE 600 204 510 893 2074 3808 6035 10880 13065 17145 22330 27319 39704
VALVES 900 188 469 821 1908 3504 5552 10010 12019 15773 20543 25134 36527
1500 173 432 756 1755 3223 5108 9209 11058 14511 18900 23123 33605
2500 159 432 756 1755 3223 5108 9209 11058 -- -- -- --
150 38 102 174 400 740 1190 1700 2380 3188 4080 5015 7225
300 38 102 174 400 740 1190 1700 2380 3188 3754 4614 6647
G LO BE 600 35 86 149 352 633 985 1415 2190 2268 -- -- --
VALVES 900 32 79 137 324 582 906 1302 2015 2087 -- -- --
1500 30 73 126 298 536 834 1198 1853 1920 -- -- --
2500 27 67 116 275 493 768 1102 1705 1766 -- -- --
150 80 204 349 799 1479 2380 3400 4760 6375 8160 9350 14875
300 77 198 338 775 1435 2309 3298 4617 6184 7915 9070 14429
S W IN G
600 73 188 321 736 1363 2193 3133 4386 5874 7519 8616 13707
CHECK
900 70 179 305 700 1295 2083 2977 4167 5580 7143 8186 --
V A L V E S F .B .
1500 66 170 290 665 1231 1979 2828 3958 5301 6786 7777 --
2500 63 162 275 632 1170 1880 2687 3760 5036 6447 7388 --
150 56 127 200 494 675 944 1378 1916 2874 4311 6467 9700
300 56 127 200 494 675 944 1378 1916 2874 4311 6467 9700
600 49 111 176 434 594 830 1213 1686 2529 3794 5691 8536
S T R A IN E R S
900 48 109 172 426 582 814 1188 1652 2479 3718 5577 8365
1500 47 107 169 417 570 797 1165 1619 2429 3643 5466 8198
2500 46 105 165 409 559 781 1141 1587 2380 3571 5356 8034
135
VALVOSIDER
CONVERSION TABLES
Multiply by to obtain Multiply by to obtain

mil 25,4 µ (micron) ft/s (foot per second) 3,281 m/s (metre per second)
in (inch) 25,4 mm m/min (metre per minute) 60 m/s (metre per second)
Length ft (foot) 0,3048 m Velocity ft/min (foot per minute) 196,85 m/s (metre per second)
yd (yard) 0,9144 m mile/h (mile per hour) 1,6093 km/h (kilometre per hour)
miles (nautical) 1,853 km m/s (metre per second) 3,6 km/h (kilometre per hour)
miles (statute) 1,609 km Dynamic g/ (cm s) (Poise) 0,1 Pa s = kg / (m s)
2
sq.in. (square inch) 6,4516 cm viscosity centipoise 0,001 Pa s
2
Area sq.ft. (square foot) 0,0929 cm lb/ (ft s) 1,48819 Pa s
2 2 2
sq.yd. (square yard) 0,8361 cm Kinematic cm (Stokes) 0,0001 m /s
3 2
cu.in (cubic inch) 16,387 cm viscosity centistokes 0,000001 m /s
3 2 2
cu.ft. (cubic foot) 28,317 dm ft / s 0,09290 m /s
3
UK gal (UK gallon) 4,5461 dm N m (newton metre) 0,001 kN m (kilonewton metre)
3
US gal (US gallon) 3,7854 dm Moment kN m 101,972 kgf m (kilogram-force metre)
3
Volume bushel 35,24 dm of kgf m 86,8 lbf in (Pound-force inch)
US gal (US gallon) 42 Us barrel force lbf ft (Pound-force foot) 12 lbf in (Pound-force inch)
UK pint 1,76 l (litre) lbf ft (Pound-force foot) 1,356 N m (newton metre)
3
l (litre) 1000 cm Mass per kg/m 0,672 lb/ft
3
l (litre) 1 dm unit length lb/ft 1,488 kg/m
2 2
m3 (cubic metre) 1000 l (litre) Mass per kg/m 0,2048 lb/ft
2 2
grains 0,0648 g unit area lb/ft 4,882 kg/m
2
lb (pound) 0,4536 kg Thermal W/(m °C) 6,934 Btu in/(ft h °F)
2
Mass oz (ounce) 28,3495 g conductivity Btu in/ft °F 0,1442 W/(m °C)
ton (UK ton) 1016,05 kg Btu (British Thermal Unit) 1055 J (Joule)
sh ton (US ton) 907,2 kg Entalpy Btu 0,252 kcal = Cal
t (tonne) 1000 kg J 0,73560 ft lb
2
kgf/cm = ate 0,980556 bar kWh 3600 kJ
2
Pressure Pa (Pascal) = N/m 0,00001 bar Power Btu 0,252 kcal = Cal
and MPa (Megapascal) 10 bar kcal 4186,8 J
Stress mm H2O 9,80665 Pa kj/kg 0,239 kcal/kg
Torr (mm Hg) 133,322 Pa Energy kW 1,34102 hp
psi (lbs per square inch) 0,068941 bar hp 746 watt
2 3 3
UK tonf/in 15,44 Mpa Calorific MJ/m 26,84 Btu/ft
3 3 3 3
lb/in 27,680 g/cm value Btu/ft 0,03726 MJ/m
3 3 3 3
lb/ft 0,01602 g/cm (volume basis) Btu/ft 37,26 kJ7m
3 3
Density g/cm 1000 litre - g/dm N (Newton) 0,102 kgf = kp (unità in disuso)
3 3
kg/m 0,752 ton/yd Force lbf (pound-force) 4,4483 N
3
ton/yd 13,319 lb/Ukgal kgf = kp 2,205 lbf
to obtain by Divide to obtain by Divide
To add to obtain
psig (psi at gauge) 14.70 psia (psi absolute)
bar (at gauge) 1,01325 bar absolute
°C (degrees Celsius) 273,15 K (degees Kelvin)
°F (degrees Fahrenheit) 459,4 °R (degrees Rankine)
to obtain subtract To
136
TEMPERATURE CONVERSION VALVOSIDER
FAHRENHEIT AND CENTIGRADE MANUFACTURER OF VALVES
(a) (a) (a) (a) (a)

°C °C °F °C °C °F °C °C °F °C °C °F °C °C °F
°F °F °F °F °F
-17,2 1 33,8 16,1 61 141,8 149 300 572 482 900 1652
-16,7 2 35,6 16,7 62 143,6 154 310 590 488 910 1670
-16,1 3 37,4 17,2 63 145,4 160 320 608 493 920 1688
-15,6 4 39,2 17,8 64 147,2 166 330 626 499 930 1706
-15,0 5 41,0 18,3 65 149,0 171 340 644 504 940 1724
-14,4 6 42,8 18,9 66 150,8 177 350 662 510 950 1742
-13,9 7 44,6 19,4 67 152,6 182 360 680 516 960 1760
-13,3 8 46,4 20,0 68 154,4 188 370 698 521 970 1778
-12,8 9 48,2 20,6 69 156,2 193 380 716 527 980 1796
-12,2 10 50,0 21,1 70 158,0 199 390 734 532 990 1814
-11,7 11 51,8 21,7 71 159,8 204 400 752 538 1000 1832
-273 -459,4 -11,1 12 53,6 22,2 72 161,6 210 410 770 549 1020 1868
-268 -450 -10,6 13 55,4 22,8 73 163,4 216 420 788 560 1040 1904
-262 -440 -10,0 14 57,2 23,3 74 165,2 221 430 806 571 1060 1940
-257 -430 -9,4 15 59,0 23,9 75 167,0 227 440 824 582 1080 1976
-251 -420 -8,9 16 60,8 24,4 76 168,8 232 450 842 593 1100 2012
-246 -410 -8,3 17 62,6 25,0 77 170,6 238 460 860 604 1120 2048
-240 -400 -7,8 18 64,4 25,6 78 172,4 243 470 878 616 1140 2084
-234 -390 -7,2 19 66,2 26,1 79 174,2 249 480 896 627 1160 2120
-229 -380 -6,7 20 68,0 26,7 80 176,0 254 490 914 638 1180 2156
-223 -370 -6,1 21 69,8 27,2 81 177,8 260 500 932 649 1200 2192
-218 -360 -5,6 22 71,6 27,8 82 179,6 266 510 950 660 1220 2228
-212 -350 -5,0 23 73,4 28,3 83 181,4 271 520 968 671 1240 2264
-207 -340 -4,4 24 75,2 28,9 84 183,2 277 530 986 682 1260 2300
-201 -330 -3,9 25 77,0 29,4 85 185,0 282 540 1004 693 1280 2336
-196 -320 -3,3 26 78,8 30,0 86 186,8 288 550 1022 704 1300 2372
-190 -310 -2,8 27 80,6 30,6 87 188,6 293 560 1040 732 1350 2462
-184 -300 -2,2 28 82,4 31,1 88 190,4 299 570 1058 760 1400 2552
-179 -290 -1,7 29 84,2 31,7 89 192,2 304 580 1076 788 1450 2642
-173 -280 -1,1 30 86,0 32,2 90 194,0 310 590 1094 816 1500 2732
-169 -273 -459,4 -0,6 31 87,8 32,8 91 195,8 316 600 1112 843 1550 2822
-168 -270 -454 0,0 32 89,6 33,3 92 197,6 321 610 1130 871 1600 2912
-162 -260 -436 0,6 33 91,4 33,9 93 199,4 327 620 1148 899 1650 3002
-157 -250 -418 1,1 34 93,2 34,4 94 201,2 332 630 1166 927 1700 3092
-151 -240 -400 1,7 35 95,0 35,0 95 203,0 338 640 1184 954 1750 3182
-146 -230 -382 2,2 36 96,8 35,6 96 204,8 343 650 1202 982 1800 3272
-140 -220 -364 2,8 37 98,6 36,1 97 206,6 349 660 1220 1010 1850 3362
-134 -210 -346 3,3 38 100,4 36,7 98 208,4 354 670 1238 1038 1900 3452
-129 -200 -328 3,9 39 102,2 37,2 99 210,2 360 680 1256 1066 1950 3542
-123 -190 -310 4,4 40 104,0 37,8 100 212,0 366 690 1274 1093 2000 3632
-118 -180 -292 5,0 41 105,8 43 110 230 371 700 1292 1121 2050 3722
-112 -170 -274 5,6 42 107,6 49 120 248 377 710 1310 1149 2100 3812
-107 -160 -256 6,1 43 109,4 54 130 266 382 720 1328 1177 2150 3902
-101 -150 -238 6,7 44 111,2 60 140 284 388 730 1346 1204 2200 3992
-96 -140 -220 7,2 45 113,0 66 150 302 393 740 1364 1232 2250 4082
-90 -130 -202 7,8 46 114,8 71 160 320 399 750 1382 1260 2300 4172
-84 -120 -184 8,3 47 116,6 77 170 338 404 760 1400 1288 2350 4262
-79 -110 -166 8,9 48 118,4 82 180 356 410 770 1418 1316 2400 4352
-73 -100 -148 9,4 49 120,2 88 190 374 416 780 1436 1343 2450 4442
-68 -90 -130 10,0 50 122,0 93 200 392 421 790 1454 1371 2500 4532
-62 -80 -112 10,6 51 123,8 99 210 410 427 800 1472 1399 2550 4622
-57 -70 -94 11,1 52 125,6 100 212 414 432 810 1490 1427 2600 4712
-51 -60 -76 11,7 53 127,4 104 220 428 438 820 1508 1454 2650 4802
-46 -50 -58 12,2 54 129,2 110 230 446 443 830 1526 1482 2700 4892
-40 -40 -40 12,8 55 131,0 116 240 464 449 840 1544 1510 2750 4982
-34 -30 -22 13,3 56 132,8 121 250 482 454 850 1562 1538 2800 5072
-29 -20 -4 13,9 57 134,6 127 260 500 460 860 1580 1566 2850 5162
-28 -18 0 14,4 58 136,4 132 270 518 466 870 1598 1593 2900 5252
-23 -10 14 15,0 59 138,2 138 280 536 471 880 1616 1621 2950 5342
-18 0 32 15,6 60 140,0 143 290 554 477 890 1634 1649 3000 5432
The central column (a) represent the know temperature in °C or in °F.
The equivalent temperature in °F or in °C is then read from the column to the right or the left.
General Formula °C = (°F - 32) x 5/9
°F = (°C x 9/5) + 32
All data, subject to technicals changes, are only for information and not for official use.
137
VALVOSIDER LINEAR CONVERSION
MANUFACTURER OF VALVES FROM inches TO mm (1 inch = 25,4 mm)
INCHES 0 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16
0 0,00 1,59 3,18 4,76 6,35 7,94 9,53 11,11 12,70 14,29 15,88 17,46 19,05 20,64 22,23 23,81
1 25,40 26,99 28,58 30,16 31,75 33,34 34,93 36,51 38,10 39,69 41,28 42,86 44,45 46,04 47,63 49,21
2 50,80 52,39 53,98 55,56 57,15 58,74 60,33 61,91 63,50 65,09 66,68 68,26 69,85 71,44 73,03 74,61
3 76,20 77,79 79,38 80,96 82,55 84,14 85,73 87,31 88,90 90,49 92,08 93,66 95,25 96,84 98,43 100,01
4 101,60 103,19 104,78 106,36 107,95 109,54 111,13 112,71 114,30 115,89 117,48 119,06 120,65 122,24 123,83 125,41
5 127,00 128,59 130,18 131,76 133,35 134,94 136,53 138,11 139,70 141,29 142,88 144,46 146,05 147,64 149,23 150,81
6 152,40 153,99 155,58 157,16 158,75 160,34 161,93 163,51 165,10 166,69 168,28 169,86 171,45 173,04 174,63 176,21
7 177,80 179,39 180,98 182,56 184,15 185,74 187,33 188,91 190,50 192,09 193,68 195,26 196,85 198,44 200,03 201,61
8 203,20 204,79 206,38 207,96 209,55 211,14 212,73 214,31 215,90 217,49 219,08 220,66 222,25 223,84 225,43 227,01
9 228,60 230,19 231,78 233,36 234,95 236,54 238,13 239,71 241,30 242,89 244,48 246,06 247,65 249,24 250,83 252,41
10 254,00 255,59 257,18 258,76 260,35 261,94 263,53 265,11 266,70 268,29 269,88 271,46 273,05 274,64 276,23 277,81
11 279,40 280,99 282,58 284,16 285,75 287,34 288,93 290,51 292,10 293,69 295,28 296,86 298,45 300,04 301,63 303,21
12 304,80 306,39 307,98 309,56 311,15 312,74 314,33 315,91 317,50 319,09 320,68 322,26 323,85 325,44 327,03 328,61
13 330,20 331,79 333,38 334,96 336,55 338,14 339,73 341,31 342,90 344,49 346,08 347,66 349,25 350,84 352,43 354,01
14 355,60 357,19 358,78 360,36 361,95 363,54 365,13 366,71 368,30 369,89 371,48 373,06 374,65 376,24 377,83 379,41
15 381,00 382,59 384,18 385,76 387,35 388,94 390,53 392,11 393,70 395,29 396,88 398,46 400,05 401,64 403,23 404,81
16 406,40 407,99 409,58 411,16 412,75 414,34 415,93 417,51 419,10 420,69 422,28 423,86 425,45 427,04 428,63 430,21
17 431,80 433,39 434,98 436,56 438,15 439,74 441,33 442,91 444,50 446,09 447,68 449,26 450,85 452,44 454,03 455,61
18 457,20 458,79 460,38 461,96 463,55 465,14 466,73 468,31 469,90 471,49 473,08 474,66 476,25 477,84 479,43 481,01
19 482,60 484,19 485,78 487,36 488,95 490,54 492,13 493,71 495,30 496,89 498,48 500,06 501,65 503,24 504,83 506,41
20 508,00 509,59 511,18 512,76 514,35 515,94 517,53 519,11 520,70 522,29 523,88 525,46 527,05 528,64 530,23 531,81
21 533,40 534,99 536,58 538,16 539,75 541,34 542,93 544,51 546,10 547,69 549,28 550,86 552,45 554,04 555,63 557,21
22 558,80 560,39 561,98 563,56 565,15 566,74 568,33 569,91 571,50 573,09 574,68 576,26 577,85 579,44 581,03 582,61
23 584,20 585,79 587,38 588,96 590,55 592,14 593,73 595,31 596,90 598,49 600,08 601,66 603,25 604,84 606,43 608,01
24 609,60 611,19 612,78 614,36 615,95 617,54 619,13 620,71 622,30 623,89 625,48 627,06 628,65 630,24 631,83 633,41
25 635,00 636,59 638,18 639,76 641,35 642,94 644,53 646,11 647,70 649,29 650,88 652,46 654,05 655,64 657,23 658,81
26 660,40 661,99 663,58 665,16 666,75 668,34 669,93 671,51 673,10 674,69 676,28 677,86 679,45 681,04 682,63 684,21
27 685,80 687,39 688,98 690,56 692,15 693,74 695,33 696,91 698,50 700,09 701,68 703,26 704,85 706,44 708,03 709,61
28 711,20 712,79 714,38 715,96 717,55 719,14 720,73 722,31 723,90 725,49 727,08 728,66 730,25 731,84 733,43 735,01
29 736,60 738,19 739,78 741,36 742,95 744,54 746,13 747,71 749,30 750,89 752,48 754,06 755,65 757,24 758,83 760,41
30 762,00 763,59 765,18 766,76 768,35 769,94 771,53 773,11 774,70 776,29 777,88 779,46 781,05 782,64 784,23 785,81
31 787,40 788,99 790,58 792,16 793,75 795,34 796,93 798,51 800,10 801,69 803,28 804,86 806,45 808,04 809,63 811,21
32 812,80 814,39 815,98 817,56 819,15 820,74 822,33 823,91 825,50 827,09 828,68 830,26 831,85 833,44 835,03 836,61
33 838,20 839,79 841,38 842,96 844,55 846,14 847,73 849,31 850,90 852,49 854,08 855,66 857,25 858,84 860,43 862,01
34 863,60 865,19 866,78 868,36 869,95 871,54 873,13 874,71 876,30 877,89 879,48 881,06 882,65 884,24 885,83 887,41
35 889,00 890,59 892,18 893,76 895,35 896,94 898,53 900,11 901,70 903,29 904,88 906,46 908,05 909,64 911,23 912,81
36 914,40 915,99 917,58 919,16 920,75 922,34 923,93 925,51 927,10 928,69 930,28 931,86 933,45 935,04 936,63 938,21
37 939,80 941,39 942,98 944,56 946,15 947,74 949,33 950,91 952,50 954,09 955,68 957,26 958,85 960,44 962,03 963,61
38 965,20 966,79 968,38 969,96 971,55 973,14 974,73 976,31 977,90 979,49 981,08 982,66 984,25 985,84 987,43 989,01
39 990,60 992,19 993,78 995,36 996,95 998,54 1000,13 1001,71 1003,30 1004,89 1006,48 1008,06 1009,65 1011,24 1012,83 1014,41
40 1016,00 1017,59 1019,18 1020,76 1022,35 1023,94 1025,53 1027,11 1028,70 1030,29 1031,88 1033,46 1035,05 1036,64 1038,23 1039,81
41 1041,40 1042,99 1044,58 1046,16 1047,75 1049,34 1050,93 1052,51 1054,10 1055,69 1057,28 1058,86 1060,45 1062,04 1063,63 1065,21
42 1066,80 1068,39 1069,98 1071,56 1073,15 1074,74 1076,33 1077,91 1079,50 1081,09 1082,68 1084,26 1085,85 1087,44 1089,03 1090,61
43 1092,20 1093,79 1095,38 1096,96 1098,55 1100,14 1101,73 1103,31 1104,90 1106,49 1108,08 1109,66 1111,25 1112,84 1114,43 1116,01
44 1117,60 1119,19 1120,78 1122,36 1123,95 1125,54 1127,13 1128,71 1130,30 1131,89 1133,48 1135,06 1136,65 1138,24 1139,83 1141,41
45 1143,00 1144,59 1146,18 1147,76 1149,35 1150,94 1152,53 1154,11 1155,70 1157,29 1158,88 1160,46 1162,05 1163,64 1165,23 1166,81
46 1168,40 1169,99 1171,58 1173,16 1174,75 1176,34 1177,93 1179,51 1181,10 1182,69 1184,28 1185,86 1187,45 1189,04 1190,63 1192,21
47 1193,80 1195,39 1196,98 1198,56 1200,15 1201,74 1203,33 1204,91 1206,50 1208,09 1209,68 1211,26 1212,85 1214,44 1216,03 1217,61
48 1219,20 1220,79 1222,38 1223,96 1225,55 1227,14 1228,73 1230,31 1231,90 1233,49 1235,08 1236,66 1238,25 1239,84 1241,43 1243,01
49 1244,60 1246,19 1247,78 1249,36 1250,95 1252,54 1254,13 1255,71 1257,30 1258,89 1260,48 1262,06 1263,65 1265,24 1266,83 1268,41
50 1270,00 1271,59 1273,18 1274,76 1276,35 1277,94 1279,53 1281,11 1282,70 1284,29 1285,88 1287,46 1289,05 1290,64 1292,23 1293,81
138
TERMS AND CONDITIONS
Quotes are made without any obligation. An order is considered accepted when our order
acknowledgement is received.
Orders are non-cancellable unless approved by management and cancellation charges
may apply.
Prices are quoted “ex works” Borgosesia. All transportation charges, insurance, customs
charges, special packing, any other fees will be the customer’s (buyer’s) responsibility, as
well as any delays on delivery of goods.
Valvosider will not be responsible for any interruption or setback on delivery or delays in
completing the contract due to strikes, work stoppages, fires, floods, accidents, inability to
obtain materials, fuel, transportation or any other causes beyond our control. Penalty will
not apply if not written in the contract.
All complaints and claims about shortages, corrections and/or reductions should be made
within 30 days after receipt of goods. Damages and/or loss of goods in transit will be the
sole responsibility of the carrier and all claims should be filed directly with them.
All amount of invoice due to Valvosider must be paid without rebate, deductions or set-off
of any kind. The customer (buyer) should never have the right to suspend his obligation.
The customer (buyer) will have an interest bearing debt equal to the statutory rate of
interest in Italy at the time of all or any unpaid portion on the last day of the payment term.
Valvosider reserves the right to change or modify the design and construction of any
product without incurring any obligation to supply, substitute or modify goods previously
sold.
Before shipment all goods are carefully tested. Valvosider guarantees its products against
any defective material and workmanship for a period of up to one year from shipping date
as long as goods are used for its intended and recommended purpose. Valvosider’s
obligation under warranty is limited to repair of the product or replacement of any part or
parts having defects in material or workmanship. The customer (buyer) shall permit
Valvosider to inspect the product to determine if indeed is warranty work.
Valvosider is not responsible to damages done to the product during repairs and/or
replacement, said obligations and remedies to be sole warranty given hereunder. No
warranty will apply to any product which has been modified, altered or changed in design
or function after leaving the Valvosider factory.
Catalog pictures are only shown as a reference of the different products made by
Valvosider. The actual product may vary in its design as changes are made for
improvement to the product.
In case of controversy only the judicial authorities of Vercelli, Italy law court are competent.
139
VALVOSIDER s.r.l.
Via S. Rocco, 2 - P.O. BOX 76 - 13011 Borgosesia (VC) - Italy
Phone: +39 0163 22991 - Fax: +39 0163 21537
e-mail: [email protected] - http://www.valvosider.com

Valvosider Complete Catalogue Valves

Uploaded by

Copyright:

Available Formats

Valvosider Complete Catalogue Valves

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Valvosider Complete Catalogue Valves

Uploaded by

Copyright:

Available Formats

VALVOSIDER

Second Location in Borgosesia

DESCRIPTION OF A TYPICAL GATE VALVE

EYE BOLT PIN

GATE VALVES 150 2” - 48” 450

GATE VALVES 150 2” - 40” 450EB

GATE VALVES 150 2” - 24” 450SO

GATE VALVES 600 2” - 24” P52

GATE VALVES 150 3” - 40” T50

4 - Rating ASME B16.34

PART NAME W45x L45x M45x B45x C45x

FIG. N. 450 - GATE VALVES OVAL BODY ASME CLASS 150

FIG. N. 451 - GATE VALVES ASME CLASS 300

FIG. N. 452 - GATE VALVES ASME CLASS 600

FIG. N. 453 - GATE VALVES ASME CLASS 900 features on request

FIG. N. 451EB - CRYOGENIC GATE VALVES ASME CLASS 300

14 ? Face to face ASME B16.10

? Testing API 598

FIG. N. 451SO - BELLOW GATE VALVES ASME CLASS 300

FIG. N. 452SO - BELLOW GATE VALVES ASME CLASS 600

PART NAME WP5x IP5x MP5x WCP5x FP5x

FIG. N. P52 - PRESSURE SEAL GATE VALVES ASME CLASS 600

FIG. N. P53 - PRESSURE SEAL GATE VALVES ASME CLASS 900

FIG. N. P54 - PRESSURE SEAL GATE VALVES ASME CLASS 1500

FIG. N. P55 - PRESSURE SEAL GATE VALVES ASME CLASS 2500

FIG. N. T51 - THROUGH CONDUIT GATE VALVES ASME CLASS 300

FIG. N. T52 - THROUGH CONDUIT GATE VALVES ASME CLASS 600

DESCRIPTION OF A TYPICAL GLOBE VALVE

600 2” - 16” 462Y 600 2” - 16” 462

900 2” - 12” 463Y 900 2” - 12” 463

1500 2” - 12” 464Y 1500 2” - 12” 464

600 2” - 16” 462A 600 2” - 16” 462EB

900 2” - 12” 463A 900 2” - 12” 463EB

1500 2” - 12” 464A 1500 2” - 12” 464EB

600 2” - 16” 462YSO 600 2” - 16” 462SO

900 2” - 12” 463YSO 900 2” - 12” 463SO

1500 2” - 12” 464YSO 1500 2” - 12” 464SO

1500 2” - 12” P84 1500 2” - 12” P64

2500 2” - 12” P85 2500 2” - 12” P65

FIG. N. 460 - GLOBE VALVES ASME CLASS 150

FIG. N. 461 - GLOBE VALVES ASME CLASS 300

FIG. N. 462 - GLOBE VALVES ASME CLASS 600

FIG. N. 463 - GLOBE VALVES ASME CLASS 900 features on request

FIG. N. 460Y - GLOBE VALVES - 'Y' TYPE ASME CLASS 150

FIG. N. 461Y - GLOBE VALVES - 'Y' TYPE ASME CLASS 300

FIG. N. 462Y - GLOBE VALVES - 'Y' TYPE ASME CLASS 600

? Rating ASME B16.34

FIG. N. 460A - GLOBE VALVES - ANGLE TYPE ASME CLASS 150

FIG. N. 461A - GLOBE VALVES - ANGLE TYPE ASME CLASS 300

FIG. N. 462A - GLOBE VALVES - ANGLE TYPE ASME CLASS 600

FIG. N. 463A - GLOBE VALVES - ANGLE TYPE ASME CLASS 900

6 ? Face to face ASME B16.10

PART NAME E46xEB F46xEB

FIG. N. 460EB - CRYOGENIC GLOBE VALVES ASME CLASS 150

FIG. N. 461EB - CRYOGENIC GLOBE VALVES ASME CLASS 300

FIG. N. 462EB - CRYOGENIC GLOBE VALVES ASME CLASS 600

5 S te m F6A (3 ) F6A (3 ) F6A (3 ) F6A (3 ) F6A (3 ) F304 (3 ) F321 (3 ) F316 (3 ) F316L (3 )

FIG. N. 460SO - GLOBE VALVES BELLOW SEAL ASME CLASS 150

FIG. N. 461SO - GLOBE VALVES BELLOW SEAL ASME CLASS 300