Scribd
Upload
2K views4 pages

Service Mode

This document provides instructions for entering the service or factory reset modes for various TV brands. The instructions typically involve pressing specific button combinations on the TV or remote control. Some examples include holding down Vol - and entering a code for Dynex TVs, pressing Menu, then 062596 for Philips TVs, or pressing Info, Menu, Mute, Power for some Samsung TV models. The service modes allow resetting or clearing settings, usually by selecting options like "Factory Reset" or "Clean All".

Uploaded by

Vishwanath Joshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views4 pages

Service Mode

This document provides instructions for entering the service or factory reset modes for various TV brands. The instructions typically involve pressing specific button combinations on the TV or remote control. Some examples include holding down Vol - and entering a code for Dynex TVs, pressing Menu, then 062596 for Philips TVs, or pressing Info, Menu, Mute, Power for some Samsung TV models. The service modes allow resetting or clearing settings, usually by selecting options like "Factory Reset" or "Clean All".

Uploaded by

Vishwanath Joshi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

​

Using the remote, enter the service mode

Dynex
Source/Input 2580
Hold Vol down on TV and hold the (#1) button on remote

Element
Menu 0000 > menu 1147

Haier
Pull up menu, Hi-Lite “audio” then enter 8893.

Hisense
“Parental ” enter 0000 then select
“Clean All ”

Insignia
Input 2580 (TV is on)

LG / Zenith
Hold MENU on TV and MENU on remote for 5 to 10 seconds,

Mitsubishi
Menu 123 or Menu 2470 (TV is on)

NEC
While powering ON, hold "MENU" or "INPUT" on TV,

Panasonic
Hold [ VOL-- ] on TV, press and hold menu button on remote.

Philips
Push Menu , select 062596

Polaroid
Hold [VOL--] and [CHANNEL--] or hold [VOL+] and [CHANNEL+]
(TV is on)

Proscan
In customer menu go to setup, select parental control menu,
enter 0000 then select “clear channel list”.
RCA
Menu 1147

Sanyo
Hold VOL Down on TV, press and hold #1 button on remote,
VOL will jump to halfway and set shuts off.
Turn back on have 1st time setup screen.

Samsung
Mute 182 power

Samsung (European)
Power off, Info - Menu - Mute - Power,

Seiki
Menu 0000

Sharp
Menu, 1999
Menu, 3481
Menu, 1147
While holding [ VOL– & INPUT ] buttons on TV plug in set when
“K ” appears push (VOL– & CHANNEL-)

Sony
Hold “arrow up” on Remote and push power button on TV (TV
is ON)

Symphony
Source/input 2580

Toshiba
On Menu, select “Installation”, then “ System Information” press
the right arrow button.
(“System Information” will change to “Factory Reset” or
something similar)

Vestel
Menu 4725 then select "RESET"

Vision Quest
Source / Input 2580
Vizio
menu under “Help” tab is Factory Default enter
0000

Haier LCD
1. Press “MENU/EXIT”;
2. Press”1”+”9” +”9” +”9”;
3. Press “OK”

Panasonic
While pressing [VOLUME ( - )] button of the main unit,
press [INFO] button of the remote control three times
within 2 seconmo

AOC
TV mode adjust volume to zero, press mute key
and press number key 9 8 7 6 .

Beko - LCD TV Service Menu Menu- 9, 3, 0, 1


(1)China lcd
menu Press SLEEP→PIC→DSP→MENU button on the remote

(2)Press MENU => Q.VIEW => MUTE to enter


(3) "PRESET"."Ch ,press 2483

Haier LCD HL40XP1 TV Service


Press Menu button, press the key 8893, and Press “OK”
Haier HTR20 20" CRT TV
Press MENU buton on TV pannel andMENU buton on remote control at the same time

Philips Service Mode


remote control an key sequence 0 6 2 5 9 6
by pressing the 'MENU' button.

samsung LCD remote control, press


INFO, MENU, MUTE, POWER ON

Sanyo LCD- Service mode


menu => press “INPUT”, “2”, “5”, ”8” and “0”

Sharp Service Mode Press and hold buttons VOL- and


PR+ on the local keyboard
Singer Service Menu
press the sequence on the remote control: 1, MUTE,
RECALL, MUTE. 1, MUTE, DISPLAY MUTE

Thomson Service Menu


Standby. Switch off with the mains switch. Press and hold
'Program down ' and 'Volume down' and then switch on

SONY Service mode


sequence DISPLAY, 5, VOL +,
POWER.

DISPLAY (info), 5, volume +, TV (Power)

Onida
Press display and VSM

You might also like