2/2 Cartridge Spool Valve, Size 5: 1 Description

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

2/2 Cartridge Spool Valve, Size 5

Qmax = 30l/min,pmax = 250bar


Direct acting, with solenoid operation
Series WK22G…/ WK22O…

S Compact construction for


cavity type AL – 3/4-16 UNF
S Optimised Dp values
S Choice of nominal power rating – 17 W or 27/25 W
S All exposed parts with zinc-nickel plating
S High pressure wet-armature solenoids
S The slip-on coil can be rotated, and it can be
replaced without opening the hydraulic envelope
S Various plug-connector systems and voltages
are available
S With manual override
S Can be fitted in a line-mounting body

1 Description
These direct acting 2/2 solenoid operated spool valves, se­ travel direction of actuators such as hydraulic motors and
ries WK22G…/ WK22O…, are size 5, pressure balanced cylinders. All external parts of the cartridge are zinc-nickel
screw-in cartridges with a 3/4-16 UNF mounting thread. plated to DIN 50979 and are thus suitable for use in the
They are designed on the proven sliding-spool principle. harshest operating environments. The slip-on coils can be
“De-energised closed” and “de-energised open” functions replaced without opening the hydraulic envelope and can
are available, each with a nominal power consumption of be positioned at any angle through 360°. If you intend to ma­
17W or 27/25 W. The straightforward design delivers an nufacture your own cavities or are designing a line-moun­
outstanding price/performance ratio and good p values. ting installation, please refer to the section “Related data
These 2/2 solenoid operated spool valves are primarily sheets”.
used in mobile and industrial applications for controlling the

2 Symbol
2 2

1 1

WK22GEA5… WK22OEA5…
WK22GNA5… WK22ONA5…

3 Technical data

General characteristics Description, value, unit


Designation 2/2 cartridge spool valve
Design direct acting, with solenoid operation
Mounting method screw-in cartridge 3/4-16 UNF
Tightening torque 40Nm ± 10%
Size nominal size 5, cavity type AL
Weight 0.35 kg
Mounting attitude unrestricted
Ambient temperature range -25°C … +50°C

Reference: 400-P-121160-EN-01
Issue: 09.2015 1/4
Hydraulic characteristics Description, value, unit
Maximum operating pressure 250bar (27/25W)
50 bar (17W)
Maximum flow rate 30l/min
Flow direction see symbols
Hydraulic fluid HL and HLP mineral oil to DIN 51 524;
for other fluids, please contact BUCHER
Hydraulic fluid temperature range -25°C … +80°C
Viscosity range 10…500mm2/s (cSt), recommended 15...250mm2/s (cSt)
Minimum fluid cleanliness class 20/18/15
Cleanliness class to ISO 4406:1999

Electrical characteristics Description, value, unit


Supply voltage 12V DC, 24V DC / 115V AC, 230V AC (50…60Hz)
Supply voltage tolerance ±10%
Nominal power consumption - version “N” V DC = 27 W / V AC = 25 W
- version “E” V DC = 17 W / V AC = 17 W
Switching time Version “E” (17W): 25 … 75 ms (energising)
15 … 30 ms (deenergising)
Version “N” (27/25W): 30 …110 ms (energising)
20 … 70 ms (deenergising)
These times are strongly influenced by fluid pressure, flow rate and viscosity, as well as by
the dwell time under pressure.

Relative duty cycle 100%


Protection class to ISO20653 / EN60529 IP 65 / IP 67 / IP 69K, see “Ordering code”
(with appropriate mating connector and
proper fitting and sealing)
Electrical connection 3-pin square plug to ISO 4400 / DIN 43 650 (standard)
for other connectors, see “Ordering code”

4 Performance graphs
measured with oil viscosity 33mm2/s (cSt), coil at steady-state temperature and 10 % undervoltage
p = f (Q) Performance limits [Version - 27/25W] p = f (Q) Performance limits [Version - 17W]
p [bar] p [bar]
300 P0224.ai 60 P0225.ai
WK22GNA5... WK22GEA5...
12
250 50

200 40 WK22OEA5...

150 30
WK22GNA5...
100 21 20
WK22ONA5...
50 12 10
21
0 0
0 5 10 15 20 25 30 Q [l/min] 0 5 10 15 20 25 30 Q [l/min]

2/4 400-P-121160-EN-01/09.2015
Series WK22G…/ WK22O…
p = f (Q) Pressure drop - Flow rate characteristic p = f (Q) Pressure drop - Flow rate characteristic
[WK22 GNA5…/ WK22GEA5…] [WK22 ONA5…/ WK22OEA5…]
p [bar] p [bar]
P0226.ai P0227.ai
10 4
1 2 12
8
2 1 3

6
21
2
4

1
2

0 0
0 5 10 15 20 25 30 Q [l/min] 0 5 10 15 20 25 30 Q [l/min]

5 Dimensions & sectional view 6 Installation information


74.4
IMPORTANT!
56.4 When fitting the cartridges, use the specified tigh­
Ma =2.7 [Nm] ±10 % tening torque. No adjustments are necessary,
1) since the cartridges are set in the factory.
3
ATTENTION!
Only qualified personnel with mechanical skills
may carry out any maintenance work. Generally,
the only work that should ever be undertaken is to
Ø 36
46

check, and possibly replace, the seals. When


changing seals, oil or grease the new seals tho­
roughly before fitting them.
72

3
100

NBR seal kit no. DS-246-N 2)


Item Qty. Description
24 1 1 O-ring no.017 17.17x1.78 N90
Ma =40 Nm ±10 %
1 2 1 O-ring no.014 12.42x1.78 N90
3/4-16 UNF 3 2 O-ring 16.00x2.00 FKM
28

2 4 1 Backup ring 10.70x1.45x1.00 FI0751


4
IMPORTANT!
2) Seal kit with FKM (Viton) seals, no. DS-246-V
WK22O... WK22G...

1 1

2 2

IMPORTANT!:
1) With manual override

400-P-121160-EN-01/09.2015 3/4
Series WK22G…/ WK22O…
7 Ordering code
Ex. W K 22G N A 5 _ - 1 24VDC _

W = directional valve
K = spool-type, direct acting
22G = 2/2 function, de-energised closed
22O 2/2 function, de-energised open
N = electrically operated, VDC = 27 W / VAC = 25 W
E = electrically operated, VDC = 17 W / VAC = 17 W
A ... Q = standard model - see relevant data sheets
Z ... R = special features - please consult BUCHER
5 = nominal size 5
(blank) = NBR (Nitrile) seals (standard)
V = FKM (Viton) seals
(special seals - please contact BUCHER)
1 ... 9 = design stage (omit when ordering new units)
... = voltage e.g. 24 (24 V)
(blank) = ISO 4400 / DIN 43 650 mating plug (standard, IP65)
M100 = without mating DIN plug
C = Kostal plug connection (IP65)
JT = Junior Timer radial plug connection (with protection diode, IP65)
IT = Junior Timer axial plug connection (with protection diode, IP65)
D = Deutsch plug connection DT04-2P (IP67/69K) mating plug not supplied
DT = Deutsch plug connection DT04-2P (with protection diode, IP67/69K)
S = AMP Superseal 1.5 (IP67) / Metri-Pack 150 (IP65)
F = flying leads (500 mm)

8 Related data sheets


Reference (Old no.) Description
400-P-040011 (i-32) The form-tool hire programme
400-P-060171 Cavity type AL
400-P-120100 (W-2.140) Overview of directional solenoid cartridge valves, size 1…5
400-P-120110 (W-2.141) Coils for screw-in cartridge valves
400-P-720101 Line-mounting body, type GALA (G3/8”)

[email protected] www.bucherhydraulics.com
E 2015 by Bucher Hydraulics AG Frutigen, CH-3714 Frutigen
All rights reserved.
Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The
information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual
improvement, we reserve the right to amend the product specifications contained in this catalogue.
Classification: 430.300.-.305.310.300

4/4 400-P-121160-EN-01/09.2015
Series WK22G…/ WK22O…

You might also like