Scribd
Upload
23 views1 page

Project Guidelines For CSE 331, Summer 2019: 1. Software Phase 2. Hardware Phase 3. Report Writing Software Phase

The project guidelines outline three phases: 1) the software phase focuses on simulation using Proteus and understanding the code interface, 2) the hardware phase demonstrates the circuit works consistently with simulation and relates hardware and software coherence, and 3) the report must include the title, names, objective, application, diagrams, components, cost, procedures, simulations, language, and detailed discussion.

Uploaded by

GolamShakirDipto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views1 page

Project Guidelines For CSE 331, Summer 2019: 1. Software Phase 2. Hardware Phase 3. Report Writing Software Phase

The project guidelines outline three phases: 1) the software phase focuses on simulation using Proteus and understanding the code interface, 2) the hardware phase demonstrates the circuit works consistently with simulation and relates hardware and software coherence, and 3) the report must include the title, names, objective, application, diagrams, components, cost, procedures, simulations, language, and detailed discussion.

Uploaded by

GolamShakirDipto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Guidelines for CSE 331, Summer 2019

There are three different phases for project:

1. Software Phase
2. Hardware Phase
3. Report Writing

Software Phase:

Make sure that your simulation is working fine using Proteus simulation tool. You have to
bring your laptops with charger to demonstrate the simulation in Proteus. Make sure you
understand how the code is working and should be familiar with the interface of the simulation
tool.

Hardware Phase:

You have to demonstrate the hardware is working consistently with the simulation. You must
be familiar with your circuit and have the knowledge about the mechanism of the circuit
regardless of your background, i.e. EEE, CSE, or ETE. You need to relate the coherency
between your both phases, i.e. hardware and software.

If your circuit, for some reasons, is not working you have to figure out the problem(s) and come
up with possible solution(s) for this project and surely need to write down your experience in
the discussion part of your project report. Even, if it is working after solving the problem(s) you
need to include that in the discussion part of the report.

Report Writing:

Your report must include – Title, names of your group members, objective, potential application,
block diagram, required components, estimated cost, working procedure, figure from simulation
tool, interfacing language from simulation tool, and discussion (should be very detailed).

You might also like