University of Wah,

Department of Mechatronics Engineering.

Course Code: MTE-101

Course Title: Computer and Programming
Assignment No. 01
Submitted by:
Usman Ghani

Submitted to:
Ma’am Nazo Haroon

Date of Submission:
4th Oct, 2019

Department of Mechatronics Engineering

Wah Engineering College
Wah Cantt
University of Wah,
Department of Mechatronics Engineering.

Types of Storage/ Memories

There are four type of storage:

1. Primary Storage
2. Secondary Storage
3. Tertiary Storage
4. Off-line Storage

1- Primary Storage
Also known as main memory.

 Main memory is directly or indirectly connected to the central processing unit via
a memory bus.
 The CPU continuously reads instructions stored there and executes them as
required.

Example:

i) RAM
ii) ROM
iii) Cache/ CPU Memory

i) RAM
 It is called Random Access Memory because any of the data in RAM can be
accessed just as fast as any of the other data.
 There are two types of RAM:

– DRAM (Dynamic Random Access Memory)

– SRAM (Static Random Access Memory)

Figure 1 (Comparison B/W SRAM & DRAM)

University of Wah,
Department of Mechatronics Engineering.

ii) ROM
 This memory is used as the computer begins to boot up.
 Small programs called firmware are often stored in ROM chips on hardware
devices (like a BIOS chip), and they contain instructions the computer can use in
performing some of the most basic operations required to operate hardware
devices.
 ROM memory cannot be easily or quickly overwritten or modified.

Figure 2 (ROM BIOS Chip)

iii) Cache/ CPU Memory

Cache memory, also called CPU memory, is high-speed static random access memory
(SRAM) that a computer microprocessor can access more quickly than it can access regular
random access memory (RAM). This memory is typically integrated directly into the CPU
chip or placed on a separate chip that has a separate bus interconnect with the CPU. The
purpose of cache memory is to store program instructions and data that are used repeatedly in
the operation of programs or information that the CPU is likely to need next. The computer
processor can access this information quickly from the cache rather than having to get it from
computer's main memory. Fast access to these instructions increases the overall speed of the
program.

Figure 3 (Cache Memory Block Diagram)

University of Wah,
Department of Mechatronics Engineering.

 Cache is a high-speed access area that can be either a reserved section of main
memory or a storage device.
 Most computers today come with L3 cache or L2 cache, while older computers
included only L1 cache.

2- Secondary Storage
 It is not directly accessible by the CPU.
 Computer usually uses its input/output channels to access secondary storage and
transfers the desired data using intermediate area in primary storage.

Example:

i) Hard Disk

i) Hard Disk
 The hard disk drive is the main, and usually largest, data storage device in a
computer.
 It can store anywhere from 160 gigabytes to 2 terabytes.
 Hard disk speed is the speed at which content can be read and written on a hard
disk.
 A hard disk unit comes with a set rotation speed varying from 4500 to 7200 rpm.
 Disk access time is measured in milliseconds.

Internal Hard Disk External Hard Disk

Portability No Yes
Price Less Expensive Expensive
Speed Fast Slow
Size Big Small
Figure 4 (Comparison B/W Internal and External Hard Disk)

Figure 5 (Internal Hard Disk) Figure 6 (External Hard Disk)

University of Wah,
Department of Mechatronics Engineering.

3- Tertiary Storage
 Typically it involves a robotic mechanism which will mount (insert) and dismount
removable mass storage media into a storage device.
 It is a comprehensive computer storage system that is usually very slow, so it is
usually used to archive data that is not accessed frequently.
 This is primarily useful for extraordinarily large data stores, accessed without
human operators.

Examples:

i) Magnetic Tape
ii) Optical Disc

i) Magnetic Tape
 A magnetically coated strip of plastic on which data can be encoded.
 Tapes for computers are similar to tapes used to store music.
 Tape is much less expensive than other storage mediums but commonly a
much slower solution that is commonly used for backup.

Figure 7 (Magnetic Tape)

ii) Optical Disk

 Optical disc is any storage media that holds content in digital format and is
read using a laser assembly is considered optical media.
 The most common types of optical media are
– Blu-ray (BD)
– Compact Disc (CD)
– Digital Versatile Disc (DVD)
University of Wah,
Department of Mechatronics Engineering.

Figure 8 (Comparison B/W CD, DVD, BD)

4- Off-line Storage
Also known as disconnected or removable storage.

 Off-line storage is a computer data storage on a medium or a device that is not

under the control of a processing unit.
 It must be inserted or connected by a human operator before a computer can
access it again.

Examples:

i) Floppy Disk
ii) Zip diskette
iii) USB Flash drive
iv) Memory card

i) Floppy Disk
 A soft magnetic disk.
 Floppy disks are portable.
 Floppy disks are slower to access than hard disks and have less storage
capacity, but they are much less expensive.
 Can store data up to 1.44MB.
 Two common sizes: 5 ¼” and 3 ½”.

Figure 9 (Floppy Disks)

University of Wah,
Department of Mechatronics Engineering.

ii) Zip Diskette

 Hardware data storage device developed by Iomega that functions like a
Standard 1.44" floppy drive.
 Capable to hold up to 100 MB of data or 250 MB of data on new drives.
 Now it less popular as users needed larger storage capabilities.

Figure 10 (Zip Diskette)

iii) USB Flash Drive

 A small, portable flash memory card that plugs into a computer’s USB port
and functions as a portable hard drive.
 Flash drives are available in sizes such as 256MB, 512MB, 1GB, 5GB, and
16GB and are an easy way to transfer and store information.

Figure 11 (USB Flash Drive)

University of Wah,
Department of Mechatronics Engineering.

iv) Memory Card

 An electronic flash memory storage disk commonly used in consumer
electronic devices such as digital cameras, MP3 players, mobile phones, and
other small portable devices.
 Memory cards are usually read by connecting the device containing the card
to your computer, or by using a USB card reader.

Figure 12 (Memory Cards and Reader)

Storage Device Features:

1- Volatility

1- Volatility
There are two types of volatility

i) Volatile
ii) Non-Volatile

i) Volatile Memory
 All contents are erased when the system's power is turned off or interrupted.
 It has been more popularly known as temporary memory.
University of Wah,
Department of Mechatronics Engineering.

ii) Non-Volatile Memory

 Will retain the stored information even if it is not constantly supplied with
electric power.
 Non-volatile memory is the device which keeps the data even when the
current is off.
 It is suitable for long-term storage of information.

Other Example of Storage Devices

i) Punch card
ii) Cloud storage
iii) RAID

i) Punched Card
 Early method of data storage used with early computers.
 Punch cards also known as Hollerith cards.
 Containing several punched holes that represents data.

Figure 13 (Punched Card)

ii) Cloud Storage

 Cloud storage means "the storage of data online in the cloud," wherein a data
is stored in and accessible from multiple distributed and connected resources
that comprise a cloud.
 Cloud storage can provide the benefits of greater accessibility and reliability;
rapid deployment; strong protection for data backup, archival and disaster
recovery purposes.

Example:

 Google Drive
 Flickr
 Microsoft Sky Drive
Figure 14 (Different Cloud Storages)
University of Wah,
Department of Mechatronics Engineering.

iii) RAID (Redundant Array of Independent Disks)

 RAID is short for redundant array of independent (or inexpensive) disks.
 It is a category of disk drives that employ two or more drives in combination
for fault tolerance and performance.
 RAID disk drives are used frequently on servers but aren't generally necessary
for personal computers.
 RAID allows you to store the same data redundantly (in multiple paces) in a
balanced way to improve overall storage performance.

Figure 15 (RAID for Data Storages and Backup)

References:
http://www.ftms.edu.my/images/Document/CSCA0101%20-
%20Computing%20Basics/csca0101_ch05.pdf

https://searchstorage.techtarget.com/definition/cache-memory

https://www.datarecovery.co.nz/data-recovery/raid/