Scribd
Upload
83 views16 pages

Potential Energy and Conservation of Energy

The document discusses potential energy and conservation of energy. It defines conservative forces as those where the work done is independent of path and depends only on the initial and final positions. Potential energy is introduced as a measure of the work done by conservative forces. Formulas are given for gravitational potential energy and elastic potential energy of springs. The principle of conservation of energy states that the total mechanical energy in a system remains constant for interactions involving conservative forces, with kinetic energy converting to potential energy and vice versa. Examples demonstrate applying this principle to solve for displacements and velocities in systems with masses and springs.

Uploaded by

zak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views16 pages

Potential Energy and Conservation of Energy

The document discusses potential energy and conservation of energy. It defines conservative forces as those where the work done is independent of path and depends only on the initial and final positions. Potential energy is introduced as a measure of the work done by conservative forces. Formulas are given for gravitational potential energy and elastic potential energy of springs. The principle of conservation of energy states that the total mechanical energy in a system remains constant for interactions involving conservative forces, with kinetic energy converting to potential energy and vice versa. Examples demonstrate applying this principle to solve for displacements and velocities in systems with masses and springs.

Uploaded by

zak
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

POTENTIAL ENERGY AND

CONSERVATION OF ENERGY
(Sections 14.5-14.6)

Dr. Mostafa Shazly


Faculty of Engineering, Room 302
Email: [email protected]
Today’s Objectives

Students will be able to:


a) Understand the concept of conservative forces and
determine the potential energy of such forces.
b) Apply the principle of conservation of energy.
APPLICATIONS

The weight of the sacks resting on this platform causes


potential energy to be stored in the supporting springs.

If the sacks weigh 100 lb and the equivalent spring constant


is k = 500 lb/ft, what is the energy stored in the springs?
3
APPLICATIONS (continued)

When a ball of weight W is dropped (from rest) from a height


h above the ground, the potential energy stored in the ball is
converted to kinetic energy as the ball drops.
What is the velocity of the ball when it hits the ground? Does
the weight of the ball affect the final velocity?
4
CONSERVATIVE FORCE

A force F is said to be conservative if the work done is


independent of the path followed by the force acting on a particle
as it moves from A to B. In other words, the work done by the
force F in a closed path (i.e., from A to B and then back to A)
equals zero.
∫ F · d r = 0 z
F B

This means the work is conserved.


A
y
A conservative force depends
only on the position of the
particle, and is independent of its
velocity or acceleration.
x 5
CONSERVATIVE FORCE (continued)

A more rigorous definition of a conservative force makes


use of a potential function (V) and partial differential
calculus, as explained in the texts. However, even without
the use of the these mathematical relationships, much can be
understood and accomplished.

The “conservative” potential energy of a particle/system is


typically written using the potential function V. There are two
major components to V commonly encountered in mechanical
systems, the potential energy from gravity and the potential
energy from springs or other elastic elements.
V total = V gravity + V springs
6
POTENTIAL ENERGY

Potential energy is a measure of the amount of work a


conservative force will do when it changes position.

In general, for any conservative force system, we can define


the potential function (V) as a function of position. The work
done by conservative forces as the particle moves equals the
change in the value of the potential function (the sum of
Vgravity and Vsprings).

It is important to become familiar with the two types of


potential energy and how to calculate their magnitudes.

7
POTENTIAL ENERGY DUE TO GRAVITY
The potential function (formula) for a gravitational force, e.g.,
weight (W = mg), is the force multiplied by its elevation from a
datum. The datum can be defined at any convenient location.

Vg = +_ W y
Vg is positive if y is
above the datum and
negative if y is
below the datum.
Remember, YOU get
to set the datum.

8
ELASTIC POTENTIAL ENERGY
Recall that the force of an elastic spring is F = ks. It is
important to realize that the potential energy of a spring, while
it looks similar, is a different formula.

Ve (where ‘e’ denotes an


elastic spring) has the distance
“s” raised to a power (the
result of an integration) or
1 2
Ve = ks
2
Notice that the potential
function Ve always yields
positive energy.

9
CONSERVATION OF ENERGY
When a particle is acted upon by a system of conservative
forces, the work done by these forces is conserved and the
sum of kinetic energy and potential energy remains
constant. In other words, as the particle moves, kinetic
energy is converted to potential energy and vice versa.
This principle is called the principle of conservation of
energy and is expressed as

T1 + V1 = T2 + V2 = Constant

T1 stands for the kinetic energy at state 1 and V1 is the


potential energy function for state 1. T2 and V2
represent these energy states at state 2. Recall, the
kinetic energy is defined as T = ½ mv2.
10
EXAMPLE
Given: The ram R has a mass of 100 kg and
is released from rest 0.75 m from top of a
spring A that has a stiffness kA =12 kN/m. If a
second spring B having a stiffness kB = 15
kN/m, is “nested” in A. The unstretched
length of each spring is indicated in the
figure.
Find: The maximum displacement of A
needed to stop the downward motion of the
ram.

11
EXAMPLE (continued)
Solution:

12
EXAMPLE

Given: The mass of the collar is 2 kg and


the spring constant is 60 N/m. The
collar has no velocity at A and the
spring is un-deformed at A.

Find: The maximum distance y the collar


drops before it stops at Point C.

Plan: Apply the conservation of energy equation between A


and C. Set the gravitational potential energy datum at
point A or point C (in this example, choose point A).

13
EXAMPLE (continued)
Solution:
Notice that the potential energy at C has two parts (Tc = 0).
Vc = (Vc)e + (Vc)g
Placing the datum for gravitational potential at A yields a
conservation of energy equation with the left side all zeros.
Since Tc equals zero at points A and C, the equation becomes

60
0 + 0 = 0 + [ ( (.75) 2 + y 2 − .75) 2 − 2(9.81) y ]
2
Note that (Vc)g is negative since point C is below the datum.
Since the equation is nonlinear, a numerical solver can be
used to find the solution or root of the equation. This solving
routine can be done with a calculator or a program like Excel.
The solution yields y = 1.61 m. 14
EXAMPLE (continued)

Also notice that since the velocities at A and C are zero, the
velocity must reach a maximum somewhere between A and C.

Since energy is conserved, the point of maximum kinetic energy


(maximum velocity) corresponds to the point of minimum
potential energy.

By expressing the potential energy at any given position as a


function of y and then differentiating, we can determine the
position at which the velocity is maximum (since dV/dy = 0 at
this position). The derivative yields another nonlinear equation
which could be solved using a numerical solver.

15
References
„ R. Hibbeler, Principles of Statics and
Dynamics, 11th Edition, Pearson, 2005
„ Online Resources, coursecompass.com

16

You might also like