DM7446A, DM7447A BCD to 7-Segment Decoders/Drivers

March 1998

DM7446A, DM7447A
BCD to 7-Segment Decoders/Drivers
General Description when the BI/RBO node is at a high logic level. All types con-
tain an overriding blanking input (BI) which can be used to
The 46A and 47A feature active-low outputs designed for control the lamp intensity (by pulsing) or to inhibit the out-
driving common-anode LEDs or incandescent indicators di- puts.
rectly. All of the circuits have full ripple-blanking input/output
controls and a lamp test input. Segment identification and re-
sultant displays are shown on a following page. Display pat- Features
terns for BCD input counts above nine are unique symbols to n All circuit types feature lamp intensity modulation
authenticate input conditions. capability
All of the circuits incorporate automatic leading and/or n Open-collector outputs drive indicators directly
trailing-edge, zero-blanking control (RBI and RBO). Lamp n Lamp-test provision
test (LT) of these devices may be performed at any time n Leading/trailing zero suppression

Connection Diagram
Dual-In-Line Package

DS006518-1

Order Number DM5447AJ, DM7446AN or DM7447AN

See Package Number J16A or N16E

© 1998 Fairchild Semiconductor Corporation DS006518 www.fairchildsemi.com

 Absolute Maximum Ratings (Note 1) DM54 −55˚C to +125˚C
DM74 0˚C to +70˚C
Supply Voltage 7V
Storage Temperature Range −65˚C to +150˚C
Input Voltage 5.5V
Operating Free Air Temperature Range

Recommended Operating Conditions

Symbol Parameter DM7446A Units
Min Nom Max
VCC Supply Voltage 4.75 5 5.25 V
VIH High Level Input Voltage 2 V
VIL Low Level Input Voltage 0.8 V
VOH High Level Output Voltage (a thru g) 30 V
IOH High Level Output Current (BI/RBO) −0.2 µA
IOL Low Level Output Current (a thru g) 40 mA
IOL Low Level Output Current (BI/RBO) 8 mA
TA Free Air Operating Temperature 0 70 ˚C
Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these
limits. The parametric values defined in the “Electrical Characteristics” table are not guaranteed at the absolute maximum ratings. The “Recommended Operating
Conditions” table will define the conditions for actual device operation.

’46A Electrical Characteristics

over recommended operating free air temperature range (unless otherwise noted)
Symbol Parameter Conditions Min Typ Max Units
(Note 2)
VI Input Clamp Voltage VCC = Min, II = −12 mA −1.5 V
VOH High Level Output VCC = Min 2.4 3.7 V
Voltage (BI/RBO) IOH = Max
ICEX High Level Output VCC = Max, VO = 30V 250 µA
Current (a thru g) VIL = Max, VIH = Min
VOL Low Level Output VCC = Min, IOL = Max 0.3 0.4 V
Voltage VIH = Min, VIL = Max
II Input Current @ Max VCC = Max, VI = 5.5V 1 mA
Input Voltage (Except BI/RBO)
IIH High Level Input VCC = Max, VI = 2.4V 40 µA
Current (Except BI/RBO)
IIL Low Level Input VCC = Max BI/RBO −4 mA
Current VI = 0.4V Others −1.6
IOS Short Circuit VCC = Max (BI/RBO) −4 mA
Output Current
ICC Supply Current VCC = Max 60 103 mA
(Note 3)
Note 2: All typicals are at VCC = 5V, TA = 25˚C.
Note 3: ICC is measured with all outputs open and all inputs at 4.5V.

www.fairchildsemi.com 2
 ’46A Switching Characteristics
at VCC = 5V and TA = 25˚C (See Section 1 for Test Waveforms and Output Load)
Symbol Parameter Conditions Min Max Units
tPLH Propagation Delay Time CL = 15 pF 100 ns
Low to High Level Output RL = 120Ω
tPHL Propagation Delay Time 100 ns
High to Low Level Output

Recommended Operating Conditions

Symbol Parameter DM5447A DM7447A Units
Min Nom Max Min Nom Max
VCC Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
VIH High Level Input Voltage 2 2 V
VIL Low Level Input Voltage 0.8 0.8 V
VOH High Level Output 15 15 V
Voltage (a thru g)
IOH High Level Output −0.2 −0.2 µA
Current (BI/RBO)
IOL Low Level Output 40 40 mA
Current (a thru g)
IOL Low Level Output 8 8 mA
Current (BI/RBO)
TA Free Air Operating Temperature −55 125 0 70 ˚C

’47A Electrical Characteristics

over recommended operating free air temperature range (unless otherwise noted)
Symbol Parameter Conditions Min Typ Max Units
(Note 4)
VI Input Clamp Voltage VCC = Min, II = −12 mA −1.5 V
VOH High Level Output VCC = Min 2.4 3.7 V
Voltage (BI/RBO) IOH = Max
ICEX High Level Output VCC = Max, VO = 15V 250 µA
Current (a thru g) VIL = Max, VIH = Min
VOL Low Level Output VCC = Min, IOL = Max 0.3 0.4 V
Voltage VIH = Min, VIL = Max
II Input Current @ Max VCC = Max, VI = 5.5V 1 mA
Input Voltage
IIH High Level Input Current VCC = Max, VI = 2.4V 40 µA
IIL Low Level Input VCC = Max BI/RBO −4 mA
Current VI = 0.4V Others −1.6
IOS Short Circuit VCC = Max (BI/RBO) −4 mA
Output Current
ICC Supply Current VCC = Max DM54 60 85 mA
(Note 5) DM74 60 103
Note 4: All typicals are at VCC = 5V, TA = 25˚C.
Note 5: ICC is measured with all outputs open and all inputs at 4.5V.

3 www.fairchildsemi.com
 ’47A Switching Characteristics
at VCC = 5V and TA = 25˚C (See Section 1 for Test Waveforms and Output Load)
Symbol Parameter Conditions Min Max Units
tPLH Propagation Delay Time CL = 15 pF 100 ns
Low to High Level Output RL = 120Ω
tPHL Propagation Delay Time 100 ns
High to Low Level Output

Function Table

46A, 47A
Decimal or Inputs BI/RBO Outputs Note
Function LT RBI D C B A (Note 6) a b c d e f g
0 H H L L L L H L L L L L L H
1 H X L L L H H H L L H H H H
2 H X L L H L H L L H L L H L
3 H X L L H H H L L L L H H L
4 H X L H L L H H L L H H L L
5 H X L H L H H L H L L H L L
6 H X L H H L H H H L L L L L
7 H X L H H H H L L L H H H H (Note 7)
8 H X H L L L H L L L L L L L
9 H X H L L H H L L L H H L L
10 H X H L H L H H H H L L H L
11 H X H L H H H H H L L H H L
12 H X H H L L H H L H H H L L
13 H X H H L H H L H H L H L L
14 H X H H H L H H H H L L L L
15 H X H H H H H H H H H H H H
BI X X X X X X L H H H H H H H (Note 8)
RBI H L L L L L L H H H H H H H (Note 9)
LT L X X X X X H L L L L L L L (Note 10)
H = High level, L = Low level, X = Don’t Care
Note 6: BI/RBO is a wire-AND logic serving as blanking input (BI) and/or ripple-blanking output (RBO).
Note 7: The blanking input (BI) must be open or held at a high logic level when output functions 0 through 15 are desired. The ripple-blanking input (RBI) must be
open or high if blanking of a decimal zero is not desired.
Note 8: When a low logic level is applied directly to the blanking input (BI), all segment outputs are high regardless of the level of any other input.
Note 9: When ripple-blanking input (RBI) and inputs A, B, C, and D are at a low level with the lamp test input high, all segment outputs go H and the ripple-blanking
output (RBO) goes to a low level (response condition).
Note 10: When the blanking input/ripple-blanking output (BI/RBO) is open or held high and a low is applied to the lamp-test input, all segment outputs are L .

www.fairchildsemi.com 4
Logic Diagram

DS006518-2

5 www.fairchildsemi.com
6
Physical Dimensions inches (millimeters) unless otherwise noted

16-Lead Ceramic Dual-In-Line Package (J)

Order Number DM5447AJ
Package Number J16A

16-Lead Molded Dual-In-Line Package (N)

Order Number DM7446AN or DM7447AN
Package Number N16E

7 www.fairchildsemi.com
DM7446A, DM7447A BCD to 7-Segment Decoders/Drivers

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE-
VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMI-
CONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or sys- 2. A critical component in any component of a life support
tems which, (a) are intended for surgical implant into device or system whose failure to perform can be rea-
the body, or (b) support or sustain life, and (c) whose sonably expected to cause the failure of the life support
failure to perform when properly used in accordance device or system, or to affect its safety or effectiveness.
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.

Fairchild Semiconductor Fairchild Semiconductor Fairchild Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.
Americas Fax: +49 (0) 1 80-530 85 86 13th Floor, Straight Block, Tel: 81-3-5620-6175
Customer Response Center Email: [email protected] Ocean Centre, 5 Canton Rd. Fax: 81-3-5620-6179
Tel: 1-888-522-5372 Deutsch Tel: +49 (0) 8 141-35-0 Tsimshatsui, Kowloon
English Tel: +44 (0) 1 793-85-68-56 Hong Kong
Italy Tel: +39 (0) 2 57 5631 Tel: +852 2737-7200
www.fairchildsemi.com Fax: +852 2314-0061

Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.