Scribd
Upload
83 views

Ac Servo Motor Control System Trainers ASMC-2: Features

The document describes an AC servo motor control system trainer (ASMC-2) that can be used to conduct 15 experiments covering topics in AC servo control systems. It has a servo control interface card installed in a microcomputer that provides analog and digital input/output. The system includes an AC servo motor, platform, and control software that allows experiments in open-loop control, PID control, variable structure control, and more. The control software provides oscilloscope functions and allows real-time computer control of experiments.

Uploaded by

Yousef Alipour
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
83 views

Ac Servo Motor Control System Trainers ASMC-2: Features

The document describes an AC servo motor control system trainer (ASMC-2) that can be used to conduct 15 experiments covering topics in AC servo control systems. It has a servo control interface card installed in a microcomputer that provides analog and digital input/output. The system includes an AC servo motor, platform, and control software that allows experiments in open-loop control, PID control, variable structure control, and more. The control software provides oscilloscope functions and allows real-time computer control of experiments.

Uploaded by

Yousef Alipour
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

AC SERVO MOTOR CONTROL SYSTEM TRAINERS

ASMC-2

The AC servo motor (ASMC-2) is the most popular component in factory automation now.
Because it is more compact and higher power output than DC servo motor. The control
technology of AC servo driver
makes AC servo driver is using carrier frequency of PWM which is generated by microprocessor.
AC servo control system permits high accuracy and fast response in closed loop system. It has
been used in a wide variety of operating environments including :
- Robotics and Manipulators
- Office machines
- Measuring equipments
- Machine tool
- Military system
- Aerospace

FEATURES
> 15 experiments that cover AC servo control system, from fundamental analysis to system
design.
> Function generator and scope software included in ASMC-2 software. No external function
generator or storage scope is required.
> Menu-driven and intuitively organized software for the optimum user-friendly learning
environment.
> Real-time on-line computer control to make teaching and learning practical and effective.
TOPICS
> Control software-MBSP provides following experiment contents :
a. AC servo motor : open loop experiment.
b. AC servo motor : PID speed control experiment.
c. AC servo motor : PID position control experiment.
d. AC servo motor : variable structure positioning control experiment.
e. AC servo motor : adaptive control positioning control experiment.
f. AC servo motor : adaptive control speed control experiment.
g. AC servo motor : composite control positioning control experiment.
h. AC servo motor : composite control speed control experiment.
i. AC servo motor : state feedback control experiment.

SPECIFICATIONS
> Servo control interface card (installed in microcomputer master control system)
- 80188 CPU.
- 32KB data register.
- 4 sets of D/A output ports.
a. 4 sets +/-5V, 75mA output.
b. 12 bit output resolution.
- 4 sets of A/D output ports.
a. +/-10V analog input.
b. 12 bit input resolution.
- 2sets of photo encoder for position detection.
a. ÖA, ÖB detection.
b. 32bit detection resolution.
- 4-layer PCB.
- Provide MOTION CONTROL function.
- Capable to use control programs written by any language under MS-DOS operating system.
- Can be installed in any kinds of IBM compatible microcomputer system.

> AC servo motor experiment platform.


- Specification of experiment platform.
a. Dimension : 1350(L) X 700(W) X 200(H)mm.
b. Material : 5mm thick pressed forming aluminum plate.
c. Surface treatment : painting with roasting after 7times phosphated dips.
d. 4pieces of hinge-type handle bars attached on both side.
e. Anticked pad under bottom of platform.
f. Built in master control box.
g. Modular-design PCB, easy to be replaced PCB from rack directly.
- Operating panel board
a. Dimension : 452(L) X 235(W)
b. Material : 2mm thick pressed forming aluminum plate mounting on experiment platform
attached with :
* Motor output voltmeter
* Motor output current indicator
* System power switch
* Experiment selection switch
* Manual type load regulation s
- Control box
a. Specifications of AC motor
* +/-10V input voltage
* 2.5A output current
* MOS-FET sine wave PWM driven class
* Input voltage 220/110V
* Overload protection circuit
* Overvoltage protection circuit
* Overcurrent protection circuit
* Overspeed protection circuit
* Overoffset protection circuit
* Calibration setting
* 23 instructions setting function
- AC servo motor and load
a. Specifications of AC servo motor
* Rated output : 400W
* Rated torque : 26Kg/cm
* Rated revolution : 1500rpm
* Rated current : 2.5A
* 1000P/R photo encoder
* Provide ƒ³A, ƒ³B, ƒ³C three phase detected
* Motor supporter and acrylic cover
- Supporter
Dimensions : 700 X 550 X 1350mm
Material : 1.6mm thick pressed forming sheet metal treated with painting with roasting after
7times phosphate dips.
Outlooks :
* Double rows pressed forming type vents on left/right side
* Power starter and stop switch on the front face
* 3 oil inlet/outlet on left side
* 4PU wheels under the bottom plate

> Control software-MBSP


- The control software-MBSP provides both microcomputer oscilloscope function and window
display
function(i.e. MBSP, RECORD, STATUS, MESSAGE windows can be displayed on one screen
simultaneously)
- The microcomputer oscilloscope provides the following functions:
a. Redraw
b. Display unit
c. T-Y1, T-Y2, Y-Y4, X1-Y1, X2-Y2 five recording modes, which can be selected and to be plotted
at different PAGE.
d. Can be matched in five different display groups i.e. Y1/Y1, Y2/Y2, Y3/X1, Y4/X2.
e. Performed channel resolution separately.
f. T1,T2 select function for window reset and enlarge.
g. Set and save files.
- System parameter function provides :
a. Sampling time setting, 1KHz MAX.
b. Execution time setting
c. Sampling frequency for recording
d. Average running time of one simulation or control loop
e. 8 channels available for recording channel
f. The setting of recording channels' intial condition/values
g. The setting of the parameter relationship
h. System commands(reset, load, quit)
- Operating function selection :
a. Start
b. Stop
c. Record
d. Plot
e. Parameter
f. Hard copy
g. Comment
h. Module Base simulation program(MBSP)
- The system can display and performfollowing items :
a. Name of experiment
b. Object of experiment
c. Block diagram of experiment
d. Control wave selection
A. Manual
B. Sine wave
C. Square wave
D. Triangle wave
E. Scale of amplitude
F. Period of frequency
G. Phase
H. Working period
I. Bias
e. Sequential wave order
f. Real time of display control system block diagram, parameter setting and the response data of
controlled system
g. Adjust the control parameter through keyboard input, the controlled actuator should be
responded immediately
h. Can write programs under MATLAB and drive each control module directly

> Interface card 1pc

ACCESSORES
> Experimental manual 1pc
> Demonstration program 1set

You might also like