Re-Code for Dazzle Headlights (LED Adaptive Headlights like EU-Spec):

Change FA (VO) to Remove 5AP & 8S4 from VO

VO Code FRM Module
Read FA(VO)Activate FA(VO)Read SVTRight-Click ECU & Select Code
VO Code KAFAS2 Module
Read FA(VO)Activate FA(VO)Read SVTRight-Click ECU & Select Code

Now Proceed to code FRM or KAFAS2 Modules … or re-code if coding was already
present

Re-Code for Enhanced Bluetooth:

Change FA (VO) to Remove 6NH from VO & Add 6NS to VO

VO Code HU_NBT
Read FA(VO)Activate FA(VO)Read SVTRight-Click ECU & Select Code

Now Proceed to code HU_NBT Module … or re-code if coding was already present

IF YOU NEED TO DO EITHER OF THE ABOVE … FOLLOW THE

INSTRUCTIONS FOR “HOW TO CHANGE FA” in my BMW Coding
Beginner’s Guide. This needs to be done FIRST … meaning before
you perform FDL Coding or Changing Werte Values

ACSM Module:

SeatBelt Reminder Lights OFF: set all to nicht_aktiv – werte=00

3000Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF
3000Gurtzustandsanzeige_Fahrer_GFW_GZA_FA

Disable Welcome 3 Gongs:

3000  Initialwarnung_GWF_IW = nicht_aktiv

SeatBelt Reminders/Sound OFF: set all to nicht_aktiv – werte=00

3000SBR_PreWarning_Fahrer
3000SBR_PreWarning_Beifahrer
3000SeatBeltReminder_SBR_Fahrer
3000 SeatBeltReminder_SBR_Beifahrer

CAS Module:

Auto Start/Stop OFF by default

3000TC_MSA_DEFAULT_OFF set to: aktiv – werte=01

1
Auto Start/Stop – Remember LAST Setting
3000TC_MSA_MEMORY set to: aktiv – werte=01

Unlock all doors with engine off (Single-Pull Handles):

3002ER-KEYOUT_AUTOVR set to: aktiv – werte=01

Electronics off when door opened

3000TC_LOGIC_KLR_OFF_DOOR set to: aktiv

Close Mirrors/Windows/SunRoof from FOB or CA

*** ALSO REQUIRES 1 VALUE CHANGED IN FRM MODULE FOR THIS TO BE ACTIVATED ***
3003KOMFORTSCHLIESSUNG_FB set to aktiv – werte=00
3003KOMFORTSCHLIESSUNG_PA set to aktiv – werte=00

Set Mirror Fold Delay Time

3003KMFRT_SCHLIESSEN set to werte=00

Start Car by pushing button (hold brake not needed)

3000TC_STARTLOCK_BRAKE set to: nicht_aktiv
3000TC_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

FRM Module:

Angel-Eyes Full Brightness (with headights on)

3060U_EFF_POL set to: wert_05__13,0V

Close Mirrors/Windows/SunRoof from FOB or CA set to aktiv – werte=01

3020ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN

Tilt Passenger Mirror farther down when in reverse

3020ASP_BORDSTEINAUTOMATIK_DELTA set to: werte=4B

Opening FRONT doors won’t interrupt windows:

3030FH_TUER_AUF_STOP_MAUT set to nickt_aktiv – werte=00

Rear Tails & Angel Eyes on as DRL

3050DRL_MODUS set to drl_s – werte=03

Fog Lights stay on w/ High Beams

3050NSW_AUS_BEI_FL set to nicht_aktiv – werte=00

Ambiance Lighting Brightness Settings:

CS_AMB_BRIGHTNESS
Kommentar=Ambient brightness Obergrenze für die Umgebungshelligkeit
Comment = Ambient brightness Upper limit for the ambient brightness

2
Default Value = 64 (seeing as the below setting is a HEX value, thus I assume this
setting is also in HEX, which makes this 100)

CS_AMB_MIN_BRIGHTNESS
Kommentar=Min Amb brightness Untergrenze für die Umgebungshelligkeit
Comment = Min Amb brightness Lower limit of the ambient brightness
Default Value = 0A (In decimal this is 10)

CS_AMB_MAX_OFFSET
Kommentar=Max amb brightness offset Helligkeit für PWM-Ausgang in Prozent
physikalischen Wert 20% ... 80%
Comment = Max amb brightness offset Brightness for PWM output as a percentage
physical value of 20% ... 80%
Default Value = 30

Brake-Force Flashing on Hard Braking:

3050ESS_ERSCHEINUNGSBILD set to: bremslicht blinkend – werte=02
3050ESS_ON_VERZ set to: US – werte=0A
3050ESS_GESCHW_SCHWELLE set to: US – werte=05

High-Beam Assistant – Auto-On:

3050FLA_AUTO_AKTIV set to: automatisch – werte=01
3050FLA_VERBAUT set to: aktiv

Welcome Lights – Add Lights to Welcome Lights

Low Beam: 3050WL_FUNKTION_AL set to: nicht_aktiv – werte=00
High Beam: 3050WL_FUNKTION_FL set to: nicht_aktiv – werte=00
License Plate: 3050WL_FUNKTION_KZL set to: hard_on – werte = 02
Fog Lights: 3050WL_FUNKTION_NSW set to: hard_on – werte = 02
Tail Lights: 3050WL_FUNKTION_SSL set to: hard_on – werte = 02

HKFM_LS Module:
*** takes up to 30 minutes to begin working after coding ***
Close/Open Trunk from Fob & Kick Panel
3010SCH_FBD set to: aktiv – werte=01
3010SCH_TOEHKI set to: aktiv – werte=01
3010TASTER_FBD set to: aktiv – werte=01

HU_NBT or HU_CIC Module: (Not all available in CIC Headunit)

High-Beam Assistant – Auto-On

3000HIGH_BEAM_ASSISTANT set to: aktiv

Set cell phone ringer as primary

3001INBAND_RINGING set to: aktiv

3
Enable Siri Voice Control
3003CE_DEVICE_SPEECH_RECOGNITION set to: aktiv

Disable Auto-Locking of Doors once begin driving

3000DOOR_LOCK_AFTER_DRIVING_AWAY set to: nicht_aktiv

Enable ///M LapTmer

3000  M_LAPTIMER set to: aktiv

Enable Sports Displays

3000EFF_DYN_SPORT_CID set to: aktiv
3000EFF_DYN_SPORT_UNIT set to: aktiv
* To change units displayed to be ft lb and hp
KOMBI3008DREHMOMENT set to: lb_ft (displays ft lb)
KOMBI3008LEISTUNG set to: ps (displays hp)

Enable Volume On-Screen Display:

3002VOLUME_POPUP_DISPLAY set to: aktiv

Enable Turn Signals in HUD

3001HUD_TURNSIGNAL set to: aktiv

DVD-in-Motion activated:
3000  SPEEDLOCK_X_KMH_MAX werte = FF
3000  SPEEDLOCK_X_KMH_MIN werte = FF
3000  VIDEO_HANDBRAKE set to: nicht_aktiv
3000  VIDEO_FRONT_LOCKED set to: nicht_aktiv
3000  VIDEO_SPEEDLOCK_CONDITION set to: none=00

Change Navi Voice to British English

HU_CIC3000VOICE_LANGUAGE_RR_US set to: aktiv
HU_NBT3000LANGUAGE_ENGLISH_UK set to: master
HU_NBT3000LANGUAGE_ENGLISH_US set to: nicht_aktiv

Navi Trip-Import
3000NAVI_TRIP_IMPORT set to: aktiv

Navi Fuel-Stop Proposal Along Route

3000NAVI_FUELSTOP_PROPOSAL set to: aktiv

Enable Video Files from USB

3000ENT_CODEC_XVID set to: aktiv
3000ENT_CODEC_XVCD set to: aktiv
3003API_USB_VIDEO set to: both

4
Add GPS Current Location to Navi Menu Items
3000NAVI_POSITION_MENU set to: aktiv

Add Turn-Signals to HUD

3000HUD_TURNSIGNAL set to: aktiv

Add Weather Band Radio (CIC Only)

3002RADIO_WEATHERBAND set to: aktiv

Enable the function of saving video files to NBT Hard Drive for play later
3000  ENT_MC_VIDEO_SUPPORT set to: aktiv

Disable Office Function Speed Lock-Out

3000 OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv

Enable Full Text Lines in Office While Driving

3003  PIM_DRIVING_TEXT_LENGTH set to: whole text_07

Disable Audible Chirp/Beep When Locking Car

3000  ACOUSTICAL_LOCK_CONFIRM set to: nicht_aktiv

Enable Speeach Input for E-Mail or SMS

3003  SPEECH_2_TEXT set to: aktiv

Enable Time-Stamp Display for Call Log

3003  TIMESTAMP_DISPLAY set to: aktiv

Add Temperature & PSI to tire monitor screen

3001RDC_SAFETY set to: aktiv

Disable Legal Disclaimers

3001LEGAL_DISCLAIMER_TIME set to: kein_ld
3001MACRO_CAM_LEGALDISCLAIMER set to: kein_ld
3001MACRO_NVICAM_LDISCLAIMER set to: kein_ld

Change i-Drive Animation to ///M Logo

3001STARTUP_EMBLEM set to: variant_01

Enable IPCE Web Server @ 172.16.222.1

3000IPCE_WEBSERVER set to: aktiv

Enable WiFi Hot-Spot

(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be
able to use this)
3000ENT_MC_WLAN_STREAM_DMP_COVERART set to: aktiv
3000ENT_MC_WLAN_STREAM_DMP_VIDEO set to: aktiv

5
 3000ENT_MC_WLAN_STREAM_DMP set to: aktiv
3003WLAN_STATUS set to: aktiv
3003WLAN_MODUS set to: ap
3003WLAN_SIGNAL_STRENGTH set to: outdoor

Enable Developer Menu

3000  ENTWICKLER_MENUE set to: aktiv 01

IHKA Module:

A/C System Remembers Last Setting

3000OFF_MEMORY set to aktiv-werte=01
Always Remember Air ReCirculating
3000MEMORY_UMLUFT set to: aktiv

JBBF Module:

Opening REAR doors won’t interrupt windows:

3070FH_TUER_AUF_STOP_MAUT set to nickt_aktiv – werte=00

Disable Headlight Washers

3000  SCHEINWERFERREINIGUNG set to: nicht_aktiv

Auto Wiper Sensitivity Increase

3530RLS_FLC_SCHWELLWERT_SATZ_1 set to: werte=05
3530RLS_FLC_SCHWELLWERT_SATZ_2 set to: werte=09
3530RLS_FLC_SCHWELLWERT_SATZ_3 set to: werte=0D

Auto Light Sensitivity Increase

3530RLS_DEF_FLC_SCHWELLWERT_SATZ set to: option below
3530RLS_FLC_SCHWELLWERT_SATZ set to: option below
Options:
normal = mornal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

KAFAS2 Module:

High-Beam Assistant – Auto-On

3050FLA_ON_OFF set to: aktiv – werte=01

KOMBI Module:

Show Digital Speed in MPH in Cluster

3000BC_DIGITAL_V set to: aktiv-werte=01

6
Show Turn Signals in HUD
3008HUD_PIA_BLINKER set to: aktiv
3000BLINKER_HUD_ENABLE set to: aktiv

Enable GPS-Sync for Clock

3000GPS_UHR set to: aktiv

Enable HUD for Entertainment & Phone List

*** Adds checkbox under settings for HUD – Displayed Information Menu ***
3000HUD_ENTERTAINMENT_ENABLE set to: aktiv
3000HUD_TELEFONANRUF_ENABLE set to: aktiv
3000HUD_TELEFONBUCH_ENABLE set to: aktiv
3000HUD_ENTERTAINMENTLIST set to: aktiv

PDC Module:

Enable Rear-View Camera at all Speeds

3009D_SCHWELLE_2 Werte = FF
3009V_SCHWELLE_2 Werte = FF

SZL Module:

Enable Paddle Shifters (for Retrofits)

3000  Lenkrad_Schaltpaddles set to: aktiv

TRSVC Module:

Enable Side-View Cameras at all Speeds

3000SV_Activate_Speed_Limit Werte=FF
3000SV_Deactivate_Speed Werte=FF