Model 240

Tedea-Huntleigh

Fluid Damped Single Point Load Cell

FEATURES
• Capacities 2 - 50kg
• Painted steel construction
• OIML R60 and NTEP approved
• IP66 protection
• Available with metric and UNC threads

OPTIONAL FEATURES
• Stainless steel construction
• Digital version available

DESCRIPTION APPLICATIONS
Model 240 is specifically designed to be available in coated steel or stainless steel, • Multi-head filling
used where fast acquisition of a stable load the model 240 is suitable for most machines
signal is paramount. The model 240’s wash-down applications.
unique fluid damping system allows the • Check weighing
The two additional sense wires feed back
load cell to be used in applications that • Grading machines
the voltage reaching the load cell.
previously required the use of LVDT’s or • Liquid filling
Complete compensation of changes in
similar types of measuring devices.
lead resistance due to temperature change • Dynamic weighing
The model 240 brings load cell adaptability and/or cable extension, is achieved by
into check weighing and grading feeding this voltage into the appropriate
applications. electronics.
Approved to OIML R60 and NTEP
standards, sealed to IP66 level and

OUTLINE DIMENSIONS in mm

2 MOUNTING HOLES
M6 - 1.0 or 1/4” - 20 UNC
58.5

4 MOUNTING HOLES
Ø 9.0 THR U
40

80

200
CENTRE VENT SCREW
220

50
OPTIONAL WASHDOWN SHROUD Ø 56 (INCLUDED)
115 (+2/-0)

64

www.vishaypgloadcells.com Technical contact in Americas: [email protected], Europe: [email protected], Document Number: 12030
258 China: [email protected], Taiwan: [email protected] Revision: 17-Feb-10
 Model 240
Fluid Damped Single Point Load Cell Tedea-Huntleigh

SPECIFICATIONS
PARAMETER VALUE UNIT
Rated capacity-R.C. (Emax) 2, 3, 5, 7, 10, 15, 20, 30, 50** kg
OIML Accuracy class NTEP Non-Approved C3*
Maximum no. of intervals (n) 5000 1000 3000
Y = Emax/Vmin 12000 1750 9000 Maximum available
Rated output-R.O. 2.0 mV/V
Rated output tolerance 0.2 ±mV/V
Zero balance 0.1 ±mV/V
Zero Return, 30 min. 0.033 0.050 0.015 ±% of applied load
Total Error 0.050 0.025 0.015 ±% of rated output
Temperature effect on zero 0.0026 NA 0.0026 ±% of rated output/°C
Temperature effect on output 0.0010 NA 0.0010 ±% of applied load/°C
Temperature range, compensated -10 to +40 °C
Temperature range, safe -30 to +70 °C
Maximum safe central overload 150 % of R.C.
Ultimate central overload 300 % of R.C.
Excitation, recommended 10 Vdc or Vac rms
Excitation, maximum 15 Vdc or Vac rms
Input impedance 415±15 Ohms
Output impedance 350±3 Ohms
Insulation resistance >1000 Mega-Ohms
Cable length To suit m
Cable type 6 wire, braided, polyurethane, silicone gel impregnation Standard
Construction Painted mild steel***
Environmental protection IP66
* 50% utilization
** 2 & 3kg are not approved by NTEP or OIML
*** Stainless steel available

Wiring schematic diagram

+ INPUT (GREEN)
+ SENSE (BLUE)

+ OUTPUT (RED)

- INPUT (BLACK)
- SENSE (BROWN)
- OUTPUT (WHITE)

Document Number: 12030 Technical contact in Americas: [email protected], Europe: [email protected], www.vishaypgloadcells.com
Revision: 17-Feb-10 China: [email protected], Taiwan: [email protected] 259
 Legal Disclaimer Notice
Vishay Precision Group

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or incompleteness
contained herein or in any other disclosure relating to any product.

Vishay Precision Group disclaims any and all liability arising out of the use or application of any product described
herein or of any information provided herein to the maximum extent permitted by law. The product specifications do
not expand or otherwise modify Vishay Precision Group’s terms and conditions of purchase, including but not limited
to the warranty expressed therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay Precision Group.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated
for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for
any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group
personnel to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 63999 www.vishaypg.com