LEARN

STB AUDIO

OP
E TI O
M N
HO S

On-Remote Setup One For All SmartControl

ENTER

EXIT

MACRO

TV INPUT AUDIO INPUT

One For All SmartControl lets you control up to 3 devices in

your home theater without having to select the device keys—
1 Install batteries in the remote. TV STB AUDIO DVD Player, Blu-ray, DVR, VCR 5 Point the remote at your device. the volume, channel, and other keys automatically go to the
right device!
1 Insignia 6 Samsung Keep the remote pointed directly Before you use One For All SmartControl for the first time,
Press the arrow on the
at the front panel of the device you however, you need to set it up. Take a look at the devices you
battery door (on the 2 LG 7 Sharp
want to operate. use when you watch TV or listen to music. Then choose that
back of the remote) to
3 Panasonic 8 Sony option in step 3 below.
open it. Then install
Getting Started 2 x AAA 2 AAA batteries (not
included).
4
5
Philips, Magnavox
RCA
9
0
Toshiba
Vizio
To set up One For All SmartControl:
1. Press and hold SETUP. The TV key blinks twice.
Your new One For All remote offers you two quick and easy Put the battery door
2. Press the SmartControl key you want to set up: for
LEARN

ways to set up: back in place and pressTV Audio Receiver, Amplifier, CD Player, Other
Watching TV and for Watching Movies. The TV key
STB AUDIO

STB AUDIO
until it clicks into place. Audio Accessory
blinks twice.
OP
E TIO
M N
O S
H

On-Remote Setup 1 Bose 6 Philips

LEARN
ENTER

3. Press the number key from the table below that

STB AUDIO

Press and hold the number key.

EXIT

6
OP
E TIO
M N
O S
H

corresponds to the devices you use for this activity.

MACRO

2 Denon 7 Pioneer
ENTER

You can follow the simple 1-2-3

EXIT

MACRO

setup steps on the remote itself. The 3 LG 8 Samsung Press and hold the number for your
TV INPUT AUDIO INPUT

instructions on this side of the Getting brand that you circled for this device. WATCH TV WATCH MOVIES
Started Guide show you how. 2 Find the brand of each device. 4 Onkyo 9 Sony TV INPUT AUDIO INPUT

Keep holding the number key until TV +

For each of your devices, circle your brand in the 5 Panasonic 0 Yamaha your device turns off. Then release 1 Satellite Receiver/Cable Box/ TV + DVD player
Streaming Player
table below. (For example, if you have a Samsung TV, the number key.
circle “Samsung” in the TV section.) TV +
Online Setup: 2 TV + DVD player
TV INPUT

L Satellite Receiver/Cable Box/

LEARN

3 Press and hold SETUP. Note: If the original remote for this device
STB AUDIO

H
O
M
E
OP
TIO
N
S

Streaming Player
doesn’t have a power key, the One For All
SimpleSet.com
ENTER

EXIT

remote will send a pause command instead. 3 TV + Audio Receiver TV + Audio Receiver
MACRO

TV TV, HDTV, LCD,

STB AUDIO Plasma TV, Projector Press and hold the SETUP key until
If you prefer, you can connect the the TV key blinks twice.
LEARN

TV INPUT AUDIO INPUT

4 TV only TV only
remote to your PC or Mac, go to 1 Insignia 6 Sanyo STB AUDIO

Note: Make sure your device TV + TV +

SimpleSet.com, and follow the online
directions and videos. The other side
2 LG 7 Sharp is on before you start. If you’re 7 Test the remote with your device. 5
Satellite Receiver/Cable Box/
Streaming Player +
Satellite Receiver/Cable Box/
Streaming Player +
programming a DVD player, media
OP
TIO
E N
M S
O
H

of this Getting Started Guide has 3 Panasonic 8 Sony If you’re satisfied with the way the remote Audio Receiver Audio Receiver
device, or anything else that plays
directions to get started with the 4 Philips, Magnavox 9 Toshiba operates it: Follow the On-Remote Setup steps to
back sound or video, make sure you
ENTER

online setup. program the remote for your next device. That’s it! You’ve finished setting up One For All
5 Samsung 0 Vizio
EXIT have something playing. SmartControl.
If the remote isn’t operating your device like you
1 To use One For All SmartControl:
What’s
LEARN

For the complete Satellite Receiver, Cable Box, Streaming Player, think it should: Try the on-remote setup for it again
Remote
4 Press the device key.
STB AUDIO

TV STB AUDIO
in this H
O
M
E
OP
TIO
N
S
user guide, Other Video Accessory and keep holding the number key in step 6 until your 1. Press the SmartControl key for the activity you want,
troubleshooting device turns back on. for Watching TV or for watching Movies.
package? 1 6
ENTER

AT&T Dish Network Press the key for the device you
tips, and customer
EXIT
LEARN

want to operate. For example, if 2. Hold the key down until all of the devices for this
1 Getting
MACRO

support, visit 2 Cisco, Scientific Atlanta 7 Motorola Notes: If you can’t find a code that operates your device using the
activity turn on.
1 USB Started STB AUDIO
you want to program the remote to on-remote setup, use the USB cable that came with this remote
www.SimpleSet.com 3 Comcast 8 Pace
Cable Guide operate your TV, press TV. to connect it to your PC or Mac and set up your remote online at Now, your volume, channel, and playback control keys
or call toll-free OP
SimpleSet.com (the other side of this sheet has directions).
will automatically go to the right device for your home
4 Cox 9 Time Warner
TIO
E N
M S
O
H

TV INPUT AUDIO INPUT

1-800-315-0990 You can also use one of the other programming methods, described theater setup.
5 DirecTV 0 Verizon ENTER in the owners manual available at SimpleSet.com.

EXIT
Questions? Just call 1-800-315-0990.
 LEARN

STB AUDIO

OP
E TI O
M N
HO S

Online Setup: SimpleSet.com

ENTER

EXIT

MACRO

TV INPUT AUDIO INPUT

1 Install batteries in the remote. 2 Gather info on your devices. 3 Connect the remote to your
LEARN
5 Disconnect the remote from your 9 Point the remote at your device.
computer. computer. Keep the remote pointed directly
Find the brand of each of
STB AUDIO

at the front panel of the device

LG your home theater devices Plug the USB cable’s smaller connector When you’re done using the online setup, follow the you want to operate.
HDTV
OP
E TIO

directions on SimpleSet.com to disconnect the remote

M N

and what kind of device it is

O S
H

into the port directly below the battery

Sony
Blu-ray (for example, do you have ENTER
compartment on the back of the remote. from your computer. Then disconnect the USB cable
Player
a DVD player or a Blu-ray from your remote.
Plug the USB cable’s larger connector into
EXIT
Dish
HD Satellite player?). Write down the info LEARN

a USB port on your PC or Mac.

Close the remote’s battery door.
Receiver
for each device in the table 6
MACRO
STB AUDIO

2 x AAA Pioneer
A/V below, under the remote H
O
M
E
OP
TIO
N
S

Receiver
key you want to use for that Press the door until it clicks into 10 Press and hold the ENTER

key.
device.
EXIT

place.
Press and hold the until your
MACRO

LEARN

device turns off. Then release the

TV INPUT AUDIO INPUT
key.
STB AUDIO

TV TVSTB TV STBTV STB AUDIO

STB AUDIOAUDIO AUDIO TV INPUT AUDIO INPUT

Press the arrow on the battery door (on the back of

OP
TIO
E N
M S
O
H

the remote) to open it. Then install 2 AAA batteries Device

(not included). Example: Note: If the original remote for this device doesn’t
7 Press and hold SETUP.
ENTER

Blu-ray player have a power key, the One For All remote will send
Leave the battery door off the remote for now—you’re 4 Set up your remote on Press and hold the SETUP key until
a pause
EXIT
command instead.
Brand SimpleSet.com
LEARN

going to access the USB port below the batteries in the the TV key blinks twice.
Example:
next steps. Sony
On your computer,
STB AUDIO

Note: Make sure your device 11 Test the remote with your device.
open a web browser is on before you start. If you’re
If you’re satisfied with the way
OP
TIO
E N
M

programming a DVD player, media

O S
H

and go to www.SimpleSet.com the remote operates it: Follow

www.SimpleSet.com device, or anything else that plays
the Online Setup steps to program
ENTER

back sound or video, make sure

EXIT
you have something playing. the remote for all of your devices.
If the remote isn’t operating
your device like you think
8 Press the device key. it should: Try one of the other
Click on the Start programming methods, described
Press the key for the device you
LEARN

Setup button at
LEARN
STB AUDIO

in the owners manual available at

want to operate. For example, if
the bottom of the
M
E
OP
TIO

SimpleSet.com.
you want to program the remote
O N
H S

STB AUDIO

home page. Then

ENTER

to operate your TV, press TV. To get the most from your One For All Remote,
EXIT

follow the on- H

O
M
E
OP
TIO
N
S

make sure you set up One For All SmartControl. See

MACRO

screen instructions the One For All SmartControl section on the other
to set up your ENTER

side of this guide for more information.

remote.
Questions? Just call 1-800-315-0990. EXIT

TV INPUT AUDIO INPUT

OARUSB04G QSG 00 © 2013 Universal Electronics