Corrosion Overview PDF
Uploaded by
Tg TarroCorrosion Overview PDF
Uploaded by
Tg TarroWELL TESTING OPERATIONS: Surface Well Testing Equipment
Well Testing Equipment Catalogue Surface Well Testing Equipment .
COFLEXIP HOSE
Coflexip hoses are generally used for 690 bar
(10,000 psi ) and 1034 bar (15,000 psi) applications to
replace hard piping. Their primary uses are as kill and
flow lines from the surface test tree.
Coflexip jumpers have certain specific properties,
inherent in their
structure, which result in the following advantages:
Corrosion resistance:
Suitable for service with all types of diphasic and
monophasic crudes, methanol, glycol, etc.H2S and CO2
resistance.
Suitable for various:
Applications, Crude production, Water injection, Gas
lift, etc.
Fire resistance (Lloyd’s Certificate No.:
ICD/F82/415)
In the event of fire, the internal thermoplastic layers
greatly reduce thermal conductivity so that pressure loss
occurs gradually. There is no sudden bursting of the
pipe.
Electro-conductivity:
The Coflexip jumpers itself acts as a conductor, owing to 3.0” COFLEXIP 10,000 PSIG
the steel layers in the structure. There is no Build-up of
static electricity in the pipe.
Absence of scaling: Mechanical resistance and performances:
Absence of scaling is ensured by the inner thermoplastic Numerous laboratory test programs and extensive
layer. There is no risk of well pollution during injection field experience in a wide variety of Applications
operations. have consistently been proven that Coflexip pipes
Abrasion resistance: are not affected by the constant cyclic nature of
With high velocity sand, the inner thermoplastic layer their service conditions. High crush resistance is
shows far better resistance than steel. inherent in the basic Coflexip structure.
Specifications
Maximum Allowable Working pressure: 10000 psig
Test pressure: 15000 psig
Design Temperature: -4 to 266°F
Service: Sour gas (H2S)
Length: 60 feet
Weight (in air empty): 42kg/m
Minimum bending in service: 670 mm approximately
API integral flanges: API 6B x 3 1/16” - 10,000 for B x 154
MATERIALS
Inner lining: Standard
CONNECTIONS
Inlet/Outlet: 4 1/16” API RJ Flange
www.oiltestgroup.com
