Micronet™ Plus Cpu5200 Cyber Security: Application Note 51459 (Revision New, 8/2012)
Micronet™ Plus Cpu5200 Cyber Security: Application Note 51459 (Revision New, 8/2012)
Benefits:
Decreases threat surface to
reduce risk of penetration
Ensures safe, reliable,
expected operation
Reduces the risk of
non-compliance
Achilles-certified real-time
operating control
Features:
Secure version of VxWorks® *
RTOS 6.8, supporting Secure
MicroNet™ Plus CPU5200
Shell (SSH) communication
encryption
Cyber Security
Enables authenticated user
access
Password manager compliant
with NERC/CIP requirements
Tool and protocol updates
GAP™ security block
updates
Footprint update
management
Embedded firewall enforces
security at the control
Woodward reserves the right to update any portion of this publication at any time. Information provided by Woodward is
believed to be correct and reliable. However, no responsibility is assumed by Woodward unless otherwise expressly
undertaken.
Copyright © Woodward 2012
All Rights Reserved
MicroNet Plus CPU5200 Cyber Security Application Note 51459
Woodward has launched hardware and software updates to address many CIP
requirements; however, complete NERC/CIP compliance involves more than the
controls and is dependent on plant infrastructure and procedures. The physical
security remains the user’s responsibility.
2 Woodward
Application Note 51459 MicroNet Plus CPU5200 Cyber Security
Upgrade Considerations
Cyber-ready units—part numbers 5466-1045 (CPU) & 5466-1046 (RTN)—
support Coder 6.0 but don’t include license
Cyber license activation required for 5466-1045 & -1046 to be Cyber
Enabled: License part number 8928-5222
Cyber-enabled part numbers 5466-1145 (CPU) and 5466-1146 (RTN)—
supports Coder 6.0 and includes license
Flat rate upgrade charge for CPU and RTN factory hardware and
firmware upgrades (5466-1035 or
-1045 Rev F or later modules)
Flat rate repair charge for CPU and RTN hardware replacement (5466-
1035 or 1045 Rev New to E modules)
GAP application changes to migrate to new coder (6.0) and implement
security features
HMI application upgrade must be considered (iFix 3.5 to 5.1)
Communication protocol updates (move to OPC)
Computer hardware and operating system versions may need upgrade
(Windows XP to Windows 7)
May require communications strategy or overall IT
networking/infrastructure changes
Cyber-secure hardware without user license may be purchased,
license can be added at a later date
Woodward 3
We appreciate your comments about the content of our publications.
Send comments to: [email protected]