Ficha Técnica-Mobilarma 700 Series

Mobilarma 700 Series Page 1 of 2
Mobilarma 700 Series

Mobil Industrial, Ecuador
Premium Performance Rust Preventives
Product Description
The Mobilarma 700 Series contains three premium performance rust preventives that cover a range of applications including storage and inter-
operational activities. The Mobilarma 777 and 778 are intended for protection cold-rolled sheet and coiled steel in the metal industry. Mobilarma
798 is intended for the lubrication and rust protection of wire rope in industrial, construction, mining and marine applications. The Mobilarma
700 Series products exhibit excellent water displacing properties and form thin tenacious films that protect surfaces even under severe
conditions that include high moisture levels and exposure to acid or corrosive fumes.
The Mobilarma 777 and 778 form wet, oily and extremely thin barrier films that are not tacky so that they will not attract dirt or other foreign
matter. They will protect sheet and coiled steel for up to twelve months, even under severe conditions that include variations in humidity and
exposure to acid fumes that might be found in the vicinity of pickling operations.
Mobilarma 798 forms a grease-like film that protects wire ropes from corrosion tendencies of salt spray and moisture- laden atmospheres. It is
effective throughout the extremes of temperature that may be encountered at sea and gives good protection against mild acids. It is pliable at
–35ºC and will not drip at 60ºC. It resists throw-off in high-speed service and adheres without being tacky or stringy. The film is self-healing and
does not chip.

Features and Benefits
Mobilarma 777 and 778 provide an effective and cost efficient means of protecting cold-rolled sheet and coiled steel prior to processing and
during storage. They provide extended protection, even under severe storage conditions resulting in less reject and scrapped materials.
Mobilarma 798 works well between the strands of wire rope providing excellent lubrication as well as protective films. These characteristics
reduce wear and improve life of the wire ropes as well as minimize maintenance costs associated with their use. It is compatible with other wire
rope core impregnating materials that may have been applied during manufacture. It is easy to apply and economical to use.
Features Advantages and Potential Benefits
Effective rust and corrosion protection Less waste and lower costs
Easy application Less waste and lower costs
Economical to use Good coverage and protection with thin films

Applications
Mobilarma 777 and 778 are recommended for use as:
- Protective coatings for cold-rolled sheet and coiled steel
- Coatings for precision machined parts and instruments for storage
- A die lubricant (Mobilarma 778) in some light duty pressing operation

Mobilarma 798 is recommended for use for:
- Lubrication and preservation of strands and running ropes
- Impregnation of steel wire ropes during manufacture

Typical Properties
Mobilarma 700 Series 777 778 798
28.06.2019
Mobilarma 700 Series Page 2 of 2
Mobilarma 700 Series 777 778 798
Viscosity, ASTM D 445
cSt @ 40ºC 18 39
cSt @ 100ºC 23.1
Dropping point, ASTM D 2265, oC 63
Pour Point, ºC, ASTM D 97 -6 -3
Flash Point, ºC, ASTM D 92 120 190 238
Density @ 15.6ºC, calculated, lbs/gal 7.36
Specific gravity, ASTM D 1298 0.860 0.880

Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and
the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales
contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment.
The Mobil logotype, the Pegasus design, and Mobilarma are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
09-2017
Lutexsa Industrial Comercial Cia. Ltda
Dirección : Av. Francisco de Orellana y Alberto Borjes, edificio Centrum Piso 12 Of. 4
Teléfono: (593) 42634060
Typical Properties are typical of those obtained with normal production tolerance and do not constitute a specification. Variations that do not
affect product performance are to be expected during normal manufacture and at different blending locations. The information contained
herein is subject to change without notice. All products may not be available locally. For more information, contact your local ExxonMobil
contact or visit www.exxonmobil.com
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this
document is intended to override or supersede the corporate separateness of local entities. Responsibility for local action and accountability
remains with the local ExxonMobil-affiliate entities.
Energy lives here™
© Copyright 2003-2019 Exxon Mobil Corporation. All

Rights Reserved.
28.06.2019

Ficha Técnica-Mobilarma 700 Series

Uploaded by

Copyright:

Available Formats

Ficha Técnica-Mobilarma 700 Series

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ficha Técnica-Mobilarma 700 Series

Uploaded by

Copyright:

Available Formats

Mobilarma 700 Series Page 1 of 2

Mobilarma 700 Series

Features Advantages and Potential Benefits

Easy application Less waste and lower costs

Economical to use Good coverage and protection with thin films

Mobilarma 700 Series 777 778 798

Viscosity, ASTM D 445

cSt @ 100ºC 23.1

Dropping point, ASTM D 2265, oC 63

Pour Point, ºC, ASTM D 97 -6 -3

Flash Point, ºC, ASTM D 92 120 190 238

Density @ 15.6ºC, calculated, lbs/gal 7.36

Specific gravity, ASTM D 1298 0.860 0.880

Energy lives here™

© Copyright 2003-2019 Exxon Mobil Corporation. All

You might also like