Scribd Logo
Upload

Welcome to Scribd!

  • 195 views

    En 10139

    Uploaded by

    Alex Lacerda
    This document outlines the chemical composition, mechanical properties, and delivery conditions for various grades of European Standard EN10139 steel. It specifies the allowed maximum percentages for carbon, phosphorus, sulfur, and other elements in each grade. It also lists required minimum and maximum values for mechanical properties like yield strength, tensile strength, and elongation at failure. Additional notes provide adjustments to property requirements based on steel thickness. Surface finishes and appearances are also defined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    En 10139

    Uploaded by

    Alex Lacerda
    195 views1 page
    This document outlines the chemical composition, mechanical properties, and delivery conditions for various grades of European Standard EN10139 steel. It specifies the allowed maximum percentages for carbon, phosphorus, sulfur, and other elements in each grade. It also lists required minimum and maximum values for mechanical properties like yield strength, tensile strength, and elongation at failure. Additional notes provide adjustments to property requirements based on steel thickness. Surface finishes and appearances are also defined.

    Original Description:

    En 10139

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines the chemical composition, mechanical properties, and delivery conditions for various grades of European Standard EN10139 steel. It specifies the allowed maximum percentages for carbon, phosphorus, sulfur, and other elements in each grade. It also lists required minimum and maximum values for mechanical properties like yield strength, tensile strength, and elongation at failure. Additional notes provide adjustments to property requirements based on steel thickness. Surface finishes and appearances are also defined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    195 views1 page

    En 10139

    Uploaded by

    Alex Lacerda
    This document outlines the chemical composition, mechanical properties, and delivery conditions for various grades of European Standard EN10139 steel. It specifies the allowed maximum percentages for carbon, phosphorus, sulfur, and other elements in each grade. It also lists required minimum and maximum values for mechanical properties like yield strength, tensile strength, and elongation at failure. Additional notes provide adjustments to property requirements based on steel thickness. Surface finishes and appearances are also defined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    European Standard EN10139

    Chemical composition (% max) Delivery condition Mechanical properties

    Grade Elongation min %


    C P S Mn Ti Symbol Re N/mm2 Rm N/mm2
    A80 A50
    A - 270 - 390 28 30
    LC max. 280 1) 4) 270-410 4) 28 2) 4) 30 2) 4)
    C290 200-380 290-430 18 20
    C340 min. 250 340-490 - -
    DC01 0,12 10) 0,045 0,045 0,60 10) - C390 min. 310 390-540 - -
    C440 min. 360 440-590 - -
    C490 min. 420 490-640 - -
    C590 min. 520 590-740 - -
    C690 min. 630 min. 690 - -
    A - 270 - 370 34 36
    LC max. 240 1) 4) 270-370 4) 34 2) 4) 36 2) 4)
    C290 210-355 290-390 22 24
    C340 min. 240 340-440 - -
    DC03 0,1 0,035 0,035 0,45 -
    C390 min. 330 390-490 - -
    C440 min. 380 440-540 - -
    C490 min. 440 490-590 - -
    C590 min. 540 min. 590 - -
    A 270-390 38 40
    LC max. 210 1) 3) 4) 270-350 4) 38 2) 4) 40 2) 4)
    C290 220-325 290-390 24 26
    C340 min. 240 340-440 - -
    DC04 0,08 0,03 0,03 0,40 -
    C390 min. 350 390-490 - -
    C440 min. 400 440-540 - -
    C490 min. 460 490-590 - -
    C590 min. 560 590-690 - -
    DC05 0,06 0,025 0,025 0,35 - LC max. 180 1) 4) 270-330 4) 40 2) 4) 42 2) 4)
    DC06 0,02 0,02 0,02 0,25 0,30 7) LC max. 180 1) 4) 6) 270-350 4) 38 2) 4) 40 2) 4)

    Surface appearance MA MB MC
    1) If the yield point is not pronounced, the yield point values apply to the 0,2% proof stress, otherwise to the
    Surface finish Rough Matt Smooth Mirror lower yield point (Rel).For 0,5 > thickness ≤ 0,7: Re +20N/mm2, HV +5. For thickness ≤ 0,5 mm: Re +40
    N/mm2, HV +10.

    2) For 0,5 < thickness ≤ 0,7 mm: % El min. -2. For 0,2 mm < thickness ≤ 0,5 mm :% El min. -4. For thickness ≤ 0,2 mm: % El min -6
    3) For thickness ˃ 1,5 mm: Re max. = 235 N/mm2.

    4) For surface appearance MB and MC: Re Rm +20 N/mm2, %El min. -2, HV +5

    You might also like