Scribd Logo
Upload

Welcome to Scribd!

  • 136 views

    X-Ray Machine

    Uploaded by

    Vijay Saini
    This document provides technical specifications for an X-ray machine including an X-ray generator capable of 125kVp and 500mA, a rotating anode X-ray tube, radiography capabilities from 40-125kV and 80-500mA, and a digital control panel. It also specifies a floor-to-ceiling tube stand, horizontal table with a movable grid bucky, AERB approval for 500mA usage, standard accessories like lead aprons and cassettes, and a 380-440Vac three phase power supply requirement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    X-Ray Machine

    Uploaded by

    Vijay Saini
    136 views3 pages
    This document provides technical specifications for an X-ray machine including an X-ray generator capable of 125kVp and 500mA, a rotating anode X-ray tube, radiography capabilities from 40-125kV and 80-500mA, and a digital control panel. It also specifies a floor-to-ceiling tube stand, horizontal table with a movable grid bucky, AERB approval for 500mA usage, standard accessories like lead aprons and cassettes, and a 380-440Vac three phase power supply requirement.

    Original Description:

    X-Ray Machine Details

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical specifications for an X-ray machine including an X-ray generator capable of 125kVp and 500mA, a rotating anode X-ray tube, radiography capabilities from 40-125kV and 80-500mA, and a digital control panel. It also specifies a floor-to-ceiling tube stand, horizontal table with a movable grid bucky, AERB approval for 500mA usage, standard accessories like lead aprons and cassettes, and a 380-440Vac three phase power supply requirement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    136 views3 pages

    X-Ray Machine

    Uploaded by

    Vijay Saini
    This document provides technical specifications for an X-ray machine including an X-ray generator capable of 125kVp and 500mA, a rotating anode X-ray tube, radiography capabilities from 40-125kV and 80-500mA, and a digital control panel. It also specifies a floor-to-ceiling tube stand, horizontal table with a movable grid bucky, AERB approval for 500mA usage, standard accessories like lead aprons and cassettes, and a 380-440Vac three phase power supply requirement.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    TECHNICAL SPECIFICATIONS

    Equipment Name : X-Ray Machine 500mA With Table

    X-RAY GENERATOR

    1. Type : Full wave rectified


    2. Max KVp: 125
    3. Max mA: 500
    4. Should have 500mA at 100KV and 320mA at 125KV.

    X-RAY TUBE

    1. Type : Rotating anode


    2. Focal spot : Dual 1.2x1.2mm and 2 x 2mm
    3. Anode heat capacity: 240KHU
    4. Anode speed: 2800 RPM at 50 Hz.

    RADIOGRAPHY

    1. KV range: 40 – 125
    2. mA range: Small focus- 80 to 160 mA
    3. Large focus- 160 to 500 mA

    CONTROL PANEL

    1. Digital display of all radiographic parameters


    2. Major and minor KVp control.
    3. Electronic timer with range of 0.01 to 5 sec in at least 24 steps.
    4. Automatic tube over load protection.
    5. Line voltage compensator for coarse and fine adjustment.

    MECHANICAL SPECIFICATIONS

    1. Floor to ceiling tube stand


    2. Fully counter balanced
    3. Easy to move and handle
    4. Light beam diaphragm collimator.
    5. One pair of high voltage cables at least 6 meters long.
    6. Tube head should be rotated 360 deg.
    7. Extendable hand switch with cable for x-ray exposure.

    TABLE SPECIFICATION

    1. The table should be horizontal type


    2. Table top should be radiolucent with negligible x-ray absorption, stain free, break
    resistant and water proof.
    3. Bucky should be movable grid type.
    4. Grid should be aluminum interspaced with minimum ratio of 6:1 and 60
    lines/inches.
    5. Bucky should travel the entire length of the table.
    6. Cassette tray should be of stainless steel, auto centering of cassette with cassette
    lock and should be capable to accommodate 14”x17”
    7. Compression band, hand grip, foot rest and foot step should be provided.

    FEATURES

    1. The quoted model and tube should be AERB type approved for usage up to
    500mA. Relevant copies of the certificate should be attached with the bid.

    STANDARD ACCESSORIES

    1. Three fold X-ray protection barrier.


    2. Lead apron 0.5mm lead equivalence with thyroid guard – 1 no.
    3. Light weight latest model cassettes with high speed screen 15x12 – 3 nos, 12x10
    – 3 nos, 10x8 – 3 nos.
    4. Channel type hanger each size 5 nos.
    5. Should be supplied with chest stand and cone for skull x-rays.
    6. Dark room accessories should be provided inclusive of developing tank (4 nos),
    Dark room lamp, lead markers R, L, 0-9 and A-Z each 2 sets.
    7. Cassette storage box.

    POWER SUPPLY REQUIREMENTS

    1. 380 to 440Vac, Three phase, 50/60 Hz.

    SPECIFICATION OF LEAD APRON.

    1. Should be AERB approved.


    2. Should be light weight 1mm lead equivalent.
    3. Should be hook and loop type (Velcro).
    4. Should be supplied along with thyroid guard.

    SPECIFICATION FOR THREE FOLD LEAD PROTECTIVE BARRIER.

    1. Should be a three fold mobile lead protective barrier.


    2. Should be a mounted on heavy duty casters.
    3. Should have a viewing window of 1.5 mm thick lead equivalence.
    4. The centre part should have 3 feet width and 6 feet height. The sides should be
    1.5 feet width and 6 feet height.

    You might also like