Scribd
Upload
645 views1 page

Lodestar Signal Generator

The SG4162AD is a compact solid state signal generator and counter designed for hobbyists and technicians. It has an oscillator section that can generate signals from 100kHz to 150MHz and a 6 digit LED counter section that can measure frequencies from 10Hz to 150MHz with an accuracy of ±1 count. The unit operates on AC 115/230V power and measures 215x120x220mm and weighs approximately 1.6kg.

Uploaded by

wayan.wandira8122
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
645 views1 page

Lodestar Signal Generator

The SG4162AD is a compact solid state signal generator and counter designed for hobbyists and technicians. It has an oscillator section that can generate signals from 100kHz to 150MHz and a 6 digit LED counter section that can measure frequencies from 10Hz to 150MHz with an accuracy of ±1 count. The unit operates on AC 115/230V power and measures 215x120x220mm and weighs approximately 1.6kg.

Uploaded by

wayan.wandira8122
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

 

 
 
SIGNAL GENERATOR/COUNTER 
Model: SG‐4162AD  
 
 
 
 
Description: 
 
The SG4162AD is a compact solid state build‐in oscillator & counter function designed for the hobbyist, 
service bench and technical Instruction. 
 
 
Specifications: 
 
Oscillator Section 
Frequency Range  A 100KHz~320KHz      B 300KHz~1100KHz  
C 1MHz~3.3MHz         D30MHz~llMHz 
E 10MHz~35MHz         F 32MHz~1SOMHz 
RF Output   100mVrms, Approx (up to 35MHz) 
Output Control   HIGH LOW Switch and fine adjuster. 
Modulation   INT. 1KHz(AM) 3% Approx:  
EXT. 50Hz ‐ 20KHz, at less than 1V rms input  
Audio Output  1 KHz, MIN. 2V rms (fixed) 
Crystal Oscillator   For 1~15MHz crystal In type HC‐6u holder (not included) 
Counter Section 
Frequency Range   10 Hz to 150MHz  
HF 10 Hz to 10MHz 
VHF 10MHz to 150MHz 
Accuracy   ± 1 Count, ± Reference time Accuracy 
Gate Time   0.1 sec and 1 sec 
Input Sensitivity   10Hz~150MHz  35mV~50mV 
Input Impedance   HF 1MΩ         VHF50Ω  
 MAX Input Voltage   Less About 3V Effective 
Reference Time Frequency   10MHz 
Reference Time Accuracy   5x10^‐5 (50ppm) 0° to 40° C  
1x10^‐5(10ppm)23° ±3°C 
Display   Decimal 6 Digit LED 
Power Requirement   AC 115/230V, 50/60Hz Approx 4VA 
Dimension & Weight  215(W) , 120(H) , 220(D)mm  
Approx 1.6kg 
Accessories   BNC‐clips x1 

Made in Taiwan 

You might also like