0% found this document useful (0 votes)

180 views120 pages

Mathcad

This document provides calculations to check the shear capacity of a concrete shear wall. It includes properties of the wall such as dimensions, reinforcement details, material strengths. It then calculates the required shear strength capacity and compares it to the nominal shear strength provided by the wall. It determines that a single curtain of reinforcement is sufficient and specifies the rebar size and spacing. The summary concludes that the wall meets the required shear capacity criteria.

Uploaded by

Sokhean Chea

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

180 views120 pages

Mathcad

Uploaded by

Sokhean Chea

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 120

Concrete Shear Wall Check ( PG1)

6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 27.5 ⋅ ft h := 10 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 326 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

 n ⋅ As_horiz  −3
ρt := max  0.0025 ,  ρt = 2.778 × 10
 twall⋅ spacing 
( Horiz. reinforcement ratio )
 h  h h 
α := if  ≤ 1.5 , 3 , if  > 2 , 2 , 6 − 2⋅  ( 21.7.4.1 )
 lwall  lwall lwall  

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 82.825 ⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar

PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LENGTH OF SHEAR WALL Lw = 121.799 ft, (within vertical control joints)
THICKNESS OF WALL tw = 14 in
REINFORCING OF WALL
First vertical bars from edge 2 # 5 at each ends, with 4 in center to edge.
Second vertical bars from 1st 0 # 5 at each ends, with 4 in center to 1st bars.
Third vertical bars from 2nd 0 # 5 at each ends, with 4 in center to 2nd bars.
Next vertical bars from 3rd 2 # 5 @ 16 in o.c.
Horizontal bars 2 # 5 @ 16 in o.c. Considered as ties for PIER? NO

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 10.4258 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18009.6 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 2500

2000

1500

1000

500

0
-2000 0 2000 4000 6000 8000 10000 12000
-500
MASONRY WALL PLAN
-1000
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16208.6 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 8596.58 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00495 = 2.39 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16208.6 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 6628.33 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.0086 = 4.16 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00602 = 2.91 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
2
Asv,min = 13.940 in > Asv,actual = 10.426 in2/ft [N.G] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.003 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 15.9453 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18004.6 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 3500

3000

2500

2000

1500

1000

500

0
0 5000 10000 15000 20000 25000
-500

-1000
MASONRY WALL PLAN
-1500
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16204.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 17376.2 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00699 = 3.38 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16204.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 14250.7 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00995 = 4.81 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00797 = 3.85 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
2
Asv,min = 13.940 in < Asv,actual = 15.945 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.004 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 8.58594 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18011.2 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 2000

1500

1000

500

0
0 2000 4000 6000 8000

-500
MASONRY WALL PLAN
-1000
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16210.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 5278.92 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00665 = 3.21 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16210.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 4281.74 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00978 = 4.73 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00771 = 3.73 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
2
Asv,min = 13.940 in > Asv,actual = 8.586 in2/ft [N.G] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.003 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 2.45313 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18016.8 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 600

500

400

300

200

100

0
0 100 200 300 400 500 600
-100
MASONRY WALL PLAN
-200
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16215.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 433.122 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00702 = 3.39 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16215.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 355.976 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.01086 = 5.25 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00803 = 3.88 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
2
Asv,min = 13.940 in > Asv,actual = 2.453 in2/ft [N.G] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.003 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 8.58594 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18011.2 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 2000

1500

1000

500

0
0 2000 4000 6000 8000

-500
MASONRY WALL PLAN
-1000
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16210.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 5489.71 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00684 = 3.30 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16210.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 4466.67 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00994 = 4.80 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00807 = 3.90 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
2
Asv,min = 13.940 in > Asv,actual = 8.586 in2/ft [N.G] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.003 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 15.9453 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18004.6 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 3500

3000

2500

2000

1500

1000

500

0
0 5000 10000 15000 20000 25000
-500

-1000
MASONRY WALL PLAN
-1500
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16204.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 18021.1 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00654 = 3.16 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16204.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 14521.3 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00971 = 4.69 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00756 = 3.65 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 6.74609 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18012.9 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 1600
1400
1200
1000
800
600
400
200
0
0 1000 2000 3000 4000 5000
-200

MASONRY WALL PLAN -400

-600
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16211.6 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 3403.27 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00659 = 3.18 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16211.6 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 2731.87 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00992 = 4.79 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00774 = 3.74 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
2
Asv,min = 13.940 in > Asv,actual = 6.746 in2/ft [N.G] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.003 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 5.51953 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18014.0 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 1200

1000

800

600

400

200

0
0 500 1000 1500 2000 2500 3000
-200
MASONRY WALL PLAN
-400
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16212.6 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 1995.31 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00725 = 3.51 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16212.6 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 1678.01 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.01001 = 4.84 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00815 = 3.94 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
2
Asv,min = 13.940 in > Asv,actual = 5.520 in2/ft [N.G] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.003 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3
INPUT DATA & DESIGN SUMMARY
SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LENGTH OF SHEAR WALL Lw = 121.799 ft, (within vertical control joints)
THICKNESS OF WALL tw = 14 in
REINFORCING OF WALL
First vertical bars from edge 2 # 4 at each ends, with 4 in center to edge.
Second vertical bars from 1st 0 # 5 at each ends, with 4 in center to 1st bars.
Third vertical bars from 2nd 0 # 5 at each ends, with 4 in center to 2nd bars.
Next vertical bars from 3rd 2 # 4 @ 16 in o.c.
Horizontal bars 2 # 4 @ 16 in o.c. Considered as ties for PIER? NO

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 2.355 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18016.9 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 800

700

600

500

400

300

200

100

0
0 200 400 600 800 1000 1200 1400
-100
MASONRY WALL PLAN
-200
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16215.2 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 857.228 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00809 = 3.91 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16215.2 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 623.227 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.01373 = 6.64 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00985 = 4.76 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1072.70 kips = 2151.28 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 1721.02 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 1721.02 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 1721.02 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 1721.02 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

INPUT DATA & DESIGN SUMMARY

SPECIAL INSPECTION ( 0=NO, 1=YES ) 1 YES DOES IBC 2012 APPLY? YES
(This option only for local jurisdiction amendments to the code, not part of TMS.)
TYPE OF MASONRY ( 1=CMU, 2=BRICK ) 1 CMU
MASONRY STRENGTH fm' = 1.5 ksi
REBAR YIELD STRESS fy = 60 ksi
SEISMIC PERFORMANCE CATEGORY E SEISMIC E
SHEAR WALL IS SPECIAL REINFORCED MASONRY
SPECTRAL RESP. ACCELARATION SDS = 1.743
REDUNDANCY FACTOR ρ= 1
IS LL QUALIFIED FOR ASCE 7 EXCEPTION? YES
LIVE LOAD FACTOR PER ASCE 7 2.3.2 0.5
Forces & Load (1.2+0.2SDS)D+L+Re+1.6H (0.9-0.2SDS)D+Re+1.6H
DL LL EQ SOIL D+0.75L +0.525E+1.6H
Case (square dot on graph) (triangle dot on graph)
P (kips) 61.517 15.225 0 72.94 102.88 33.92
V (kips) 6.244 0.155 3.53 6.49 6.49
M3 (k-ft) 68.6811 1.7088 38.79 71.42 71.42
M2 (k-ft) 0 0 0

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LENGTH OF SHEAR WALL Lw = 121.799 ft, (within vertical control joints)
THICKNESS OF WALL tw = 10 in
REINFORCING OF WALL
First vertical bars from edge 2 # 5 at each ends, with 4 in center to edge.
Second vertical bars from 1st 0 # 5 at each ends, with 4 in center to 1st bars.
Third vertical bars from 2nd 0 # 5 at each ends, with 4 in center to 2nd bars.
Next vertical bars from 3rd 2 # 5 @ 16 in o.c.
Horizontal bars 2 # 5 @ 16 in o.c. Considered as ties for PIER? NO

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 14067.8 in2
SHEAR SECTIONAL AREA Av= 14067.8 in2
TOTAL STEEL AREA Ast= 12.8789 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 2.778 in ----> Ratio hw/r = 47.51 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 11939.0 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 46548.7 ft-k (TMS 3.3.4.2.2.2) 3000

2500

2000

1500

1000

500

0
0 5000 10000 15000 20000
-500
MASONRY WALL PLAN
-1000
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 10745.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 12179.5 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.0061 = 2.95 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 10745.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 9663.33 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00946 = 4.57 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.00715 = 3.46 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 3269.1 kips = 2179.4 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 3269.06 kips (TMS 3.3.4.1.2)
Vnm = 2118.74 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2615.25 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 3269.06 kips (TMS 3.3.4.1.2)
Vnm = 2101.50 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2615.25 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2615.25 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2615.25 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

2
Ash,min = 0.137 in /ft < Ash,actual = 0.330 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssh,max = 44 in > Ssh,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
Asv,min = 9.847 in2 < Asv,actual = 12.879 in2/ft [Satisfactory] (TMS 1.17.3.2.6)
Ssv,max = 44 in > Ssv,actual = 16 in [Satisfactory] (TMS 1.17.3.2.6)
A(sh+sv),min = 0.002 in2/in2 < A(sh+sv),actual = 0.005 in2/in2 [Satisfactory] (TMS 1.17.3.2.6)
PROJECT : Virgil Melose PAGE :
CLIENT : DESIGN BY :
JOB NO. : 15120-10 DATE : 2/8/2016 REVIEW BY :
Masonry Shear Wall Design Based on TMS 402-11 / 2014 LABC/ IBC 2012 (Strength Design) Shearwall @ Grid PA3

INPUT DATA & DESIGN SUMMARY

EFFECTIVE HEIGHT OF WALL hw = 11 ft

LENGTH OF SHEAR WALL Lw = 121.799 ft, (within vertical control joints)
THICKNESS OF WALL tw = 14 in
REINFORCING OF WALL
First vertical bars from edge 2 # 5 at each ends, with 4 in center to edge.
Second vertical bars from 1st 0 # 4 at each ends, with 4 in center to 1st bars.
Third vertical bars from 2nd 0 # 4 at each ends, with 4 in center to 2nd bars.
Next vertical bars from 3rd 2 # 5 @ 16 in o.c.
Horizontal bars 2 # 5 @ 16 in o.c. Considered as ties for PIER? NO

LEFT FLANGE (COMPRESSION) b11 = 0 in , b12 = 0 in , bf11 = 0 in ,(TMS 1.9.4.2.3)

tf1 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf12 = 0 in ,(TMS 1.9.4.2.3)

RIGHT FLANGE b21 = 0 in , b22 = 0 in , bf21 = 0 in, (TMS 1.9.4.2.3)

tf2 = 0 in , 2 # 6 @ 16 in o.c., Vertical bf22 = 0 in, (TMS 1.9.4.2.3)
MASONRY MODULUS OF RUPTURE fr = 163 psi
MASONRY MODULUS OF ELASTICITY Em = 1350 ksi, (TMS 1.8.2.2.1)
STEEL ELASTIC MODULI Es = 29000 ksi, (TMS 1.8.2.1)
MASONRY MAXIMUM USABLE STRAIN εmu= 0.0025 in/in (TMS 3.3.2)
STEEL STRAIN AT YIELD εy= 0.00207 in/in (TMS 3.3.2)
STRAIN GRADIENT α= 4 (TMS 3.3.3.5.1 to 3.3.3.5.4)
NET SECTIONAL AREA An= 19914.2 in2
SHEAR SECTIONAL AREA Av= 19914.2 in2
TOTAL STEEL AREA Ast= 12.2656 in2 Estimated required reinforcing steel As,req =-0.54
SECTION RADIUS OF GYRATION r= 3.933 in ----> Ratio hw/r = 33.56 < 99
NOMINAL AXIAL STRENGTH OF THE WALL Pn = 18007.9 kips (TMS 3.3.4.1.1) (Note that Ast is not used if there are no ties)
NOMINAL CRACKING MOMENT STRENGTH Mcr = 65893.6 ft-k (TMS 3.3.4.2.2.2) 3000

2500

2000

1500

1000

500

0
0 5000 10000 15000 20000
-500
MASONRY WALL PLAN
-1000
CHECK FLEXURAL & AXIAL CAPACITY BY STRENGTH DESIGN (SD)
COMBINATION (1.2+0.2SDS)D+L+ρE
Ultimate compression force Pu = 102.88 kips < φPn = 16207.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 10105.5 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.00788 = 3.81 times steel strain at yield
COMBINATION (0.9-0.2SDS)D+ρE
Ultimate compression force Pu = 33.9205 kips < φPn = 16207.1 kips [Satisfactory]
Ultimate in-plane bending moment M3u= 71.4152 ft-k < φΜn = 8479.09 ft-kips [Satisfactory]
Strain in extreme tensile reinf. εs= 0.0106 = 5.13 times steel strain at yield
CHECK MAXIMUM REINFORCEMENTS
COMBINATION D+0.75L+0.525E
Ultimate compression force Pu = 72.9 kips
Strain in extreme tensile reinf. εs= 0.0088 = 4.25 times steel strain at yield [Satisfactory] (TMS 3.3.3.5)
CHECK SHEAR CAPACITY BY STRENGTH DESIGN (SD)
= 4627.6 kips = 3085.1 kips = 1676.09 kips = 3361.37 kips
COMBINATION (1.2+0.2SDS)D+L+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2988.57 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.492 kips < φVn = 2689.1 kips [Satisfactory]
COMBINATION (0.9-0.2SDS)D+ρE
Mu = 71.42 ft-kips Vu = 6.49 kips Mu/(Vudv)= 0.091
Vnmax = 4627.63 kips (TMS 3.3.4.1.2)
Vnm = 2971.33 kips (TMS 3.3.4.1.2.1)
Ultimate shear force Vu = 6.49 kips < φVn = 2689.1 kips [Satisfactory]
DESIGN SHEAR STRENGTH SHALL EXCEED THE SHEAR CORRESPONDING TO 1.25 TIME NOMINAL FLEXURAL STRENGTH
COMB (1.2+0.2SDS)D+L+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)
COMB (0.9-0.2SDS)D+ρE φVn = 2689.10 kips > Vflexure = 16.23 kips [Satisfactory] (TMS 1.17.3.2.6.1.1)

CHECK MINIMUM REINFORCEMENTS

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 820 ⋅ kips Mu := 1651 ⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 298.035⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:06PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PG1

Code References .
Calculations per ACI 318-11, IBC 2012, CBC 2013, ASCE 7-10
Load Combinations Used : ASCE 7-10
General Information
f'c : Concrete 28 day strength = 4.0 ksi Overall Column Height = 10.0 ft
E= = 3,605.0 ksi End Fixity Top & Bottom Pinned
Density = 145.0 pcf Brace condition for deflection (buckling) along columns :
β = 0.850 X-X (width) axis :
fy - Main Rebar = 60.0 ksi Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
E - Main Rebar = 29,000.0 ksi Y-Y (depth) axis :
Allow. Reinforcing Limits ASTM A615 Bars Used Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
Min. Reinf. = 0.250 %
Max. Reinf. = 8.0 %
Load Combination : ASCE 7-10
..
Column Cross Section
Y
Column Dimensions :340.0in high x 12.0in Wide, Column Edge to Rebar
Edge Cover = 2.0in #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 27 - #5 bars left & right X #5
#5
X
#5
#5
#5
#5
#5
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads Entered loads are factored per load combinations specified by user.
.

Column self weight included : 41,083.3 lbs * Dead Load Factor

BENDING LOADS . . .
Moment acting about X-X axis, E = 1,255.0, H = 14.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 9.933 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.078 : 1 Top along X-X 125.50 k Bottom along X-X 125.50 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 22.653 k ϕ * Pn = 269.979 k
Mu-x = -1,259.09 k-ft ϕ * Mn-x = 16,395.0 k-ft
Maximum SERVICE Load Deflections . . .
Mu-y = 0.0 k-ft ϕ * Mn-y = 0.0 k-ft
Along Y-Y -.0000990 in at 5.839 ft above base
for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0 in at 0.0 ft above base
Mu at Angle = 1,259.09 k-ft ϕMn at Angle = 16,057.8 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . .ϕ. = 0.650 β = 0.850 θ = 0.80
Column Capacities . . .
Pnmax : Nominal Max. Compressive Axial Capacity 14,889.7 k
ρ : % Reinforcing 0.4407 % Rebar % Ok
Pnmin : Nominal Min. Tension Axial Capacity -1,078.80 k Reinforcing Area 17.980 in^2
ϕ Pn, max : Usable Compressive Axial Capacity 7,742.63 k Concrete Area 4,080.0 in^2
ϕ Pn, min : Usable Tension Axial Capacity -701.22 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination
X-X Y-Y base ft Pu ϕ * Pn δ x δ x * Mux δ y δy * Muy Alpha (deg) δ Mu ϕ Mn Ratio
+1.40D+1.60H Actual 9.93 57.52 7,742.63 1.000 -22.25 180.000 22.25 2,827.90 0.008
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:06PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PG1

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination
X-X Y-Y base ft Pu ϕ * Pn δx δ x * Mux δy δ y * Muy Alpha (deg) δ Mu ϕ Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.20D+1.60L+0.50S+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.20D+1.60Lr+0.50L+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.20D+1.60Lr+0.50W+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.20D+0.50L+1.60S+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.20D+1.60S+0.50W+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.20D+0.50Lr+0.50L+W+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.20D+0.50L+0.50S+W+1.60H Actual 9.93 49.30 7,742.63 1.000 -22.25 180.000 22.25 3,391.01 0.007
+1.549D+0.50L+0.20S+E+1.60H Actual 9.93 63.62 1,424.28 1.000 -1,268.83 180.000 1,268.83 28,183.64 0.045
+0.90D+W+0.90H Actual 9.93 36.98 7,742.63 1.000 -12.52 180.000 12.52 2,827.90 0.004
+0.5514D+E+0.90H Actual 9.93 22.65 269.98 1.000 -1,259.09 180.000 1,259.09 16,057.83 0.078
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 1.400 1.400 k k 41.083 k
+D+L+H 1.400 1.400 k k 41.083 k
+D+Lr+H 1.400 1.400 k k 41.083 k
+D+S+H 1.400 1.400 k k 41.083 k
+D+0.750Lr+0.750L+H 1.400 1.400 k k 41.083 k
+D+0.750L+0.750S+H 1.400 1.400 k k 41.083 k
+D+0.60W+H 1.400 1.400 k k 41.083 k
+D+0.70E+H 89.250 89.250 k k 41.083 k
+D+0.750Lr+0.750L+0.450W+H 1.400 1.400 k k 41.083 k
+D+0.750L+0.750S+0.450W+H 1.400 1.400 k k 41.083 k
+D+0.750L+0.750S+0.5250E+H 67.288 67.288 k k 41.083 k
+0.60D+0.60W+0.60H 0.840 0.840 k k 24.650 k
+0.60D+0.70E+0.60H 88.690 88.690 k k 24.650 k
D Only k k 41.083 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 125.500 125.500 k k k
H Only 1.400 1.400 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft k-ft
+D+L+H k-ft k-ft
+D+Lr+H k-ft k-ft
+D+S+H k-ft k-ft
+D+0.750Lr+0.750L+H k-ft k-ft
+D+0.750L+0.750S+H k-ft k-ft
+D+0.60W+H k-ft k-ft
+D+0.70E+H k-ft k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.5250E+H k-ft k-ft
+0.60D+0.60W+0.60H k-ft k-ft
+0.60D+0.70E+0.60H k-ft k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft k-ft
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:06PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PG1

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 5.839 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 5.839 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Height = 10.0 ft

M-y Loads
#5
#5 ###.##kft

#5
#5 Height = 10.0 ft
#5
#5
#5
#5
#5
#5
X #5
#X5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5 Looking along X-X Axis
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5

Y Looking along Y-Y Axis

Interaction Diagrams .
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:06PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PG1

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,175.0 8,175.0

7,357.5 7,357.5

6,540.0 6,540.0

5,722.5 5,722.5

4,905.0 4,905.0

Phi * Pn (k)

Phi * Pn (k)
4,087.5 4,087.5

3,270.0 3,270.0

2,452.5 2,452.5

1,635.0 1,635.0

817.5 817.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,175.0 8,175.0

7,357.5 7,357.5

6,540.0 6,540.0

5,722.5 5,722.5

4,905.0 4,905.0
Phi * Pn (k)

Phi * Pn (k)
4,087.5 4,087.5

3,270.0 3,270.0

2,452.5 2,452.5

1,635.0 1,635.0

817.5 817.5

0.0 4,630.69,261.213,891.8
18,522.4
23,153.0
27,783.6
32,414.2
37,044.8
41,675.4
46,306.0 0.0 4,630.69,261.213,891.8
18,522.4
23,153.0
27,783.6
32,414.2
37,044.8
41,675.4
46,306.0
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (49.30, 22.25) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (49.30, 22.25)
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:06PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PG1

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,175.0 8,175.0

7,357.5 7,357.5

6,540.0 6,540.0

5,722.5 5,722.5

4,905.0 4,905.0

Phi * Pn (k)

Phi * Pn (k)
4,087.5 4,087.5

3,270.0 3,270.0

2,452.5 2,452.5

1,635.0 1,635.0

817.5 817.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,175.0 8,175.0

7,357.5 7,357.5

6,540.0 6,540.0

5,722.5 5,722.5

4,905.0 4,905.0
Phi * Pn (k)

Phi * Pn (k)
4,087.5 4,087.5

3,270.0 3,270.0

2,452.5 2,452.5

1,635.0 1,635.0

817.5 817.5

0.0 4,630.69,261.213,891.8
18,522.4
23,153.0
27,783.6
32,414.2
37,044.8
41,675.4
46,306.0 0.0 4,630.69,261.213,891.8
18,522.4
23,153.0
27,783.6
32,414.2
37,044.8
41,675.4
46,306.0
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (63.62, 1,268.83) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (36.98, 12.52)
Concrete Shear Wall Check ( P72)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 16.2 ⋅ ft h := 11 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 295 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 2 curtains of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 127.772⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 609 ⋅ kips Mu := 1018 ⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 422.684⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P72

.
Code References
Calculations per ACI 318-11, IBC 2012, CBC 2013, ASCE 7-10
Load Combinations Used : ASCE 7-10
General Information
f'c : Concrete 28 day strength = 4.0 ksi Overall Column Height = 11.0 ft
E= = 3,605.0 ksi End Fixity Top & Bottom Pinned
Density = 145.0 pcf Brace condition for deflection (buckling) along columns :
= 0.850 X-X (width) axis :
fy - Main Rebar = 60.0 ksi Unbraced Length for X-X Axis buckling = 11.0 ft, K = 1.0
E - Main Rebar = 29,000.0 ksi Y-Y (depth) axis :
Allow. Reinforcing Limits ASTM A615 Bars Used Unbraced Length for X-X Axis buckling = 11.0 ft, K = 1.0
Min. Reinf. = 0.250 %
Max. Reinf. = 8.0 %
Load Combination : ASCE 7-10
..
Column Cross Section
Column Dimensions :195.0in high x 12.0in Wide, Column Edge to Rebar Y

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 15.0 - #5 bars left & right X #5
#X5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 25,918.8 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 927.0, H = 60.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.202 : 1 Top along X-X 84.273 k Bottom along X-X 84.273 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 14.292 k * Pn = 78.178 k
Maximum SERVICE Load Deflections . . .
Mu-x = -981.0 k-ft * Mn-x = 4,969.69 k-ft
Along Y-Y -0.000469 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 981.0 k-ft Mn at Angle = 4,858.45 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4504 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 8,552.56 k
Pnmin : Nominal Min. Tension Axial Capacity -632.40 k Reinforcing Area 10.540 in^2
Concrete Area 2,340.0 in^2
Pn, max : Usable Compressive Axial Capacity 4,447.33 k
Pn, min : Usable Tension Axial Capacity -411.060 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 36.29 3,748.76 1.000 -96.00 180.000 96.00 9,863.01 0.010
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P72

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.20D+1.60L+0.50S+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.20D+0.50L+1.60S+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.20D+1.60S+0.50W+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 31.10 3,461.43 1.000 -96.00 180.000 96.00 10,644.83 0.009
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 40.14 244.36 1.000 -1,023.00 180.000 1,023.00 5,969.54 0.171
+0.90D+W+0.90H Actual 10.93 23.33 3,964.72 1.000 -54.00 180.000 54.00 9,131.73 0.006
+0.5514D+E+0.90H Actual 10.93 14.29 78.18 1.000 -981.00 180.000 981.00 4,858.44 0.202
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 5.455 5.455 k k 25.919 k
+D+L+H 5.455 5.455 k k 25.919 k
+D+Lr+H 5.455 5.455 k k 25.919 k
+D+S+H 5.455 5.455 k k 25.919 k
+D+0.750Lr+0.750L+H 5.455 5.455 k k 25.919 k
+D+0.750L+0.750S+H 5.455 5.455 k k 25.919 k
+D+0.60W+H 5.455 5.455 k k 25.919 k
+D+0.70E+H 64.445 64.445 k k 25.919 k
+D+0.750Lr+0.750L+0.450W+H 5.455 5.455 k k 25.919 k
+D+0.750L+0.750S+0.450W+H 5.455 5.455 k k 25.919 k
+D+0.750L+0.750S+0.5250E+H 49.698 49.698 k k 25.919 k
+0.60D+0.60W+0.60H 3.273 3.273 k k 15.551 k
+0.60D+0.70E+0.60H 62.264 62.264 k k 15.551 k
D Only k k 25.919 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 84.273 84.273 k k k
H Only 5.455 5.455 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 60.000 k-ft
+D+L+H k-ft 60.000 k-ft
+D+Lr+H k-ft 60.000 k-ft
+D+S+H k-ft 60.000 k-ft
+D+0.750Lr+0.750L+H k-ft 60.000 k-ft
+D+0.750L+0.750S+H k-ft 60.000 k-ft
+D+0.60W+H k-ft 60.000 k-ft
+D+0.70E+H k-ft 708.900 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 60.000 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 60.000 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 546.675 k-ft
+0.60D+0.60W+0.60H k-ft 36.000 k-ft
+0.60D+0.70E+0.60H k-ft 684.900 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 927.000 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P72

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 60.000 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+L+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+Lr+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+S+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.60W+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
H Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
Sketches .
Y

#5#5
#5#5
#5#5
#5#5
M-y Loads
#5#5
Height = 11.0 ft

987.00kft

Height = 11.0 ft
#5#5
#5#5
#5#5
X X
#5#5
#5#5
#5#5
#5#5
Looking along X-X Axis
#5#5
#5#5
#5#5
#5#5
#5#5

Y Looking along Y-Y Axis

Interaction Diagrams .
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P72

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) 4,700.0
Phi * Mn @ Alpha (k-ft)
4,700.0

4,230.0 4,230.0

3,760.0 3,760.0

3,290.0 3,290.0

2,820.0 2,820.0

Phi * Pn (k)

Phi * Pn (k)
2,350.0 2,350.0

1,880.0 1,880.0

1,410.0 1,410.0

940.0 940.0

470.0 470.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
4,700.0 4,700.0

4,230.0 4,230.0

3,760.0 3,760.0

3,290.0 3,290.0

2,820.0 2,820.0
Phi * Pn (k)

Phi * Pn (k)
2,350.0 2,350.0

1,880.0 1,880.0

1,410.0 1,410.0

940.0 940.0

470.0 470.0

0.0 1,526.13,052.14,578.26,104.37,630.39,156.410,682.512,208.5
13,734.6
15,260.7 0.0 1,526.13,052.14,578.26,104.37,630.39,156.410,682.5
12,208.5
13,734.6
15,260.7
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (31.10, 96.00) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (31.10, 96.00)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P72

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
4,700.0 4,700.0

4,230.0 4,230.0

3,760.0 3,760.0

3,290.0 3,290.0

2,820.0 2,820.0

Phi * Pn (k)

Phi * Pn (k)
2,350.0 2,350.0

1,880.0 1,880.0

1,410.0 1,410.0

940.0 940.0

470.0 470.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
4,700.0 4,700.0

4,230.0 4,230.0

3,760.0 3,760.0

3,290.0 3,290.0

2,820.0 2,820.0
Phi * Pn (k)

Phi * Pn (k)
2,350.0 2,350.0

1,880.0 1,880.0

1,410.0 1,410.0

940.0 940.0

470.0 470.0

0.0 1,526.13,052.14,578.26,104.37,630.39,156.410,682.512,208.5
13,734.6
15,260.7 0.0 1,526.13,052.14,578.26,104.37,630.39,156.410,682.512,208.5
13,734.6
15,260.7
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (40.14, 1,023.00) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (23.33, 54.00)
Concrete Shear Wall Check ( P201)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 16.8 ⋅ ft h := 11 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 601 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 2 curtains of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 250.919⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 365 ⋅ kips Mu := 1706⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 402.731⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 16.0 - #5 bars left & right #5
#5
X #5
#X5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 26,849.2 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 1,260.0, H = 101.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.259 : 1 Top along X-X 114.545 k Bottom along X-X 114.545 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 14.805 k * Pn = 69.858 k
Maximum SERVICE Load Deflections . . .
Mu-x = -1,350.90 k-ft * Mn-x = 5,345.24 k-ft
Along Y-Y -0.000574 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 1,350.90 k-ft Mn at Angle = 5,225.79 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4604 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 8,873.26 k
Pnmin : Nominal Min. Tension Axial Capacity -669.60 k Reinforcing Area 11.160 in^2
Concrete Area 2,424.0 in^2
Pn, max : Usable Compressive Axial Capacity 4,614.09 k
Pn, min : Usable Tension Axial Capacity -435.240 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 37.59 2,915.68 1.000 -161.60 180.000 161.60 12,551.29 0.013
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P201

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.20D+1.60L+0.50S+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.20D+0.50L+1.60S+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.20D+1.60S+0.50W+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 32.22 2,647.07 1.000 -161.60 180.000 161.60 13,240.88 0.012
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 41.58 173.21 1.000 -1,421.60 180.000 1,421.60 5,949.16 0.239
+0.90D+W+0.90H Actual 10.93 24.16 3,239.43 1.000 -90.90 180.000 90.90 12,148.15 0.007
+0.5514D+E+0.90H Actual 10.93 14.80 69.86 1.000 -1,350.90 180.000 1,350.90 5,225.79 0.259
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 9.182 9.182 k k 26.849 k
+D+L+H 9.182 9.182 k k 26.849 k
+D+Lr+H 9.182 9.182 k k 26.849 k
+D+S+H 9.182 9.182 k k 26.849 k
+D+0.750Lr+0.750L+H 9.182 9.182 k k 26.849 k
+D+0.750L+0.750S+H 9.182 9.182 k k 26.849 k
+D+0.60W+H 9.182 9.182 k k 26.849 k
+D+0.70E+H 89.364 89.364 k k 26.849 k
+D+0.750Lr+0.750L+0.450W+H 9.182 9.182 k k 26.849 k
+D+0.750L+0.750S+0.450W+H 9.182 9.182 k k 26.849 k
+D+0.750L+0.750S+0.5250E+H 69.318 69.318 k k 26.849 k
+0.60D+0.60W+0.60H 5.509 5.509 k k 16.110 k
+0.60D+0.70E+0.60H 85.691 85.691 k k 16.110 k
D Only k k 26.849 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 114.545 114.545 k k k
H Only 9.182 9.182 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 101.000 k-ft
+D+L+H k-ft 101.000 k-ft
+D+Lr+H k-ft 101.000 k-ft
+D+S+H k-ft 101.000 k-ft
+D+0.750Lr+0.750L+H k-ft 101.000 k-ft
+D+0.750L+0.750S+H k-ft 101.000 k-ft
+D+0.60W+H k-ft 101.000 k-ft
+D+0.70E+H k-ft 983.000 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 101.000 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 101.000 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 762.500 k-ft
+0.60D+0.60W+0.60H k-ft 60.600 k-ft
+0.60D+0.70E+0.60H k-ft 942.600 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 1,260.000 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P201

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 101.000 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+L+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+Lr+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+S+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.60W+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.001 in 6.423 ft
H Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
Sketches .
Y

#5#5
#5#5
#5#5
#5#5
#5#5 M-y Loads
Height = 11.0 ft

###.##kft

#5#5
Height = 11.0 ft
#5#5
#5#5
X #5#5
X
#5#5
#5#5
#5#5
#5#5 Looking along X-X Axis
#5#5
#5#5
#5#5
#5#5
#5#5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
4,875.0 4,875.0

4,387.5 4,387.5

3,900.0 3,900.0

3,412.5 3,412.5

2,925.0 2,925.0

Phi * Pn (k)

Phi * Pn (k)
2,437.5 2,437.5

1,950.0 1,950.0

1,462.5 1,462.5

975.0 975.0

487.5 487.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram

4,875.0
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
4,875.0

4,387.5 4,387.5

3,900.0 3,900.0

3,412.5 3,412.5

2,925.0 2,925.0

Phi * Pn (k)
Phi * Pn (k)

2,437.5 2,437.5

1,950.0 1,950.0

1,462.5 1,462.5

975.0 975.0

487.5 487.5

0.0 1,642.53,285.14,927.66,570.28,212.79,855.311,497.813,140.4
14,782.9
16,425.4 0.0 1,642.53,285.14,927.66,570.28,212.79,855.311,497.8
13,140.4
14,782.9
16,425.4
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (32.22, 161.60) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (32.22, 161.60)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P201

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
4,875.0 4,875.0

4,387.5 4,387.5

3,900.0 3,900.0

3,412.5 3,412.5

2,925.0 2,925.0

Phi * Pn (k)

Phi * Pn (k)
2,437.5 2,437.5

1,950.0 1,950.0

1,462.5 1,462.5

975.0 975.0

487.5 487.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
4,875.0 4,875.0

4,387.5 4,387.5

3,900.0 3,900.0

3,412.5 3,412.5

2,925.0 2,925.0
Phi * Pn (k)

Phi * Pn (k)
2,437.5 2,437.5

1,950.0 1,950.0

1,462.5 1,462.5

975.0 975.0

487.5 487.5

0.0 1,642.53,285.14,927.66,570.28,212.79,855.311,497.813,140.4
14,782.9
16,425.4 0.0 1,642.53,285.14,927.66,570.28,212.79,855.311,497.813,140.4
14,782.9
16,425.4
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (41.58, 1,421.60) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (24.16, 90.90)
Concrete Shear Wall Check ( PD1)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 20ft h := 11 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 209 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 73.179⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 447 ⋅ kips Mu := 1178 ⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 277.917⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 19.0 - #5 bars left & right X #5
#5
X
#5
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 31,900.0 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 1,011.0, H = 5.50 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.132 : 1 Top along X-X 91.909 k Bottom along X-X 91.909 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 17.590 k * Pn = 134.943 k
Maximum SERVICE Load Deflections . . .
Mu-x = -1,015.95 k-ft * Mn-x = 7,871.10 k-ft
Along Y-Y -0.000274 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 1,015.95 k-ft Mn at Angle = 7,700.15 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4521 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 10,528.9 k
Pnmin : Nominal Min. Tension Axial Capacity -781.20 k Reinforcing Area 13.020 in^2
Concrete Area 2,880.0 in^2
Pn, max : Usable Compressive Axial Capacity 5,475.05 k
Pn, min : Usable Tension Axial Capacity -507.78 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 44.66 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PD1

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.20D+1.60L+0.50S+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.20D+0.50L+1.60S+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.20D+1.60S+0.50W+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 38.28 5,475.04 1.000 -8.80 180.000 8.80 1,123.58 0.008
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 49.40 503.01 1.000 -1,019.80 180.000 1,019.80 10,627.03 0.096
+0.90D+W+0.90H Actual 10.93 28.71 5,475.04 1.000 -4.95 180.000 4.95 843.55 0.006
+0.5514D+E+0.90H Actual 10.93 17.59 134.94 1.000 -1,015.95 180.000 1,015.95 7,700.15 0.132
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 0.500 0.500 k k 31.900 k
+D+L+H 0.500 0.500 k k 31.900 k
+D+Lr+H 0.500 0.500 k k 31.900 k
+D+S+H 0.500 0.500 k k 31.900 k
+D+0.750Lr+0.750L+H 0.500 0.500 k k 31.900 k
+D+0.750L+0.750S+H 0.500 0.500 k k 31.900 k
+D+0.60W+H 0.500 0.500 k k 31.900 k
+D+0.70E+H 64.836 64.836 k k 31.900 k
+D+0.750Lr+0.750L+0.450W+H 0.500 0.500 k k 31.900 k
+D+0.750L+0.750S+0.450W+H 0.500 0.500 k k 31.900 k
+D+0.750L+0.750S+0.5250E+H 48.752 48.752 k k 31.900 k
+0.60D+0.60W+0.60H 0.300 0.300 k k 19.140 k
+0.60D+0.70E+0.60H 64.636 64.636 k k 19.140 k
D Only k k 31.900 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 91.909 91.909 k k k
H Only 0.500 0.500 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 5.500 k-ft
+D+L+H k-ft 5.500 k-ft
+D+Lr+H k-ft 5.500 k-ft
+D+S+H k-ft 5.500 k-ft
+D+0.750Lr+0.750L+H k-ft 5.500 k-ft
+D+0.750L+0.750S+H k-ft 5.500 k-ft
+D+0.60W+H k-ft 5.500 k-ft
+D+0.70E+H k-ft 713.200 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 5.500 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 5.500 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 536.275 k-ft
+0.60D+0.60W+0.60H k-ft 3.300 k-ft
+0.60D+0.70E+0.60H k-ft 711.000 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 1,011.000 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PD1

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 5.500 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5#5
#5#5
#5#5
#5#5
#5#5
#5#5 M-y Loads
Height = 11.0 ft

###.##kft

#5#5
#5#5 Height = 11.0 ft
#5#5
#5#5
X #5#5
X
#5#5
#5#5
#5#5
#5#5 Looking along X-X Axis
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,775.0 5,775.0

5,197.5 5,197.5

4,620.0 4,620.0

4,042.5 4,042.5

3,465.0 3,465.0

Phi * Pn (k)

Phi * Pn (k)
2,887.5 2,887.5

2,310.0 2,310.0

1,732.5 1,732.5

1,155.0 1,155.0

577.5 577.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,775.0 5,775.0

5,197.5 5,197.5

4,620.0 4,620.0

4,042.5 4,042.5

3,465.0 3,465.0
Phi * Pn (k)

Phi * Pn (k)
2,887.5 2,887.5

2,310.0 2,310.0

1,732.5 1,732.5

1,155.0 1,155.0

577.5 577.5

0.0 2,313.94,627.76,941.69,255.411,569.3
13,883.1
16,197.018,510.9
20,824.7
23,138.6 0.0 2,313.94,627.76,941.69,255.411,569.3
13,883.1
16,197.018,510.9
20,824.7
23,138.6
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (38.28, 8.80) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (38.28, 8.80)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PD1

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,775.0 5,775.0

5,197.5 5,197.5

4,620.0 4,620.0

4,042.5 4,042.5

3,465.0 3,465.0

Phi * Pn (k)

Phi * Pn (k)
2,887.5 2,887.5

2,310.0 2,310.0

1,732.5 1,732.5

1,155.0 1,155.0

577.5 577.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,775.0 5,775.0

5,197.5 5,197.5

4,620.0 4,620.0

4,042.5 4,042.5

3,465.0 3,465.0
Phi * Pn (k)

Phi * Pn (k)
2,887.5 2,887.5

2,310.0 2,310.0

1,732.5 1,732.5

1,155.0 1,155.0

577.5 577.5

0.0 2,313.94,627.76,941.69,255.411,569.3
13,883.1
16,197.018,510.9
20,824.7
23,138.6 0.0 2,313.94,627.76,941.69,255.411,569.3
13,883.1
16,197.018,510.9
20,824.7
23,138.6
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (49.40, 1,019.80) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (28.71, 4.95)
Concrete Shear Wall Check ( PO1)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 30.75 ⋅ ft h := 11 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 596 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 2 curtains of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 135.332⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 1045⋅ kips Mu := 2666⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 353.477⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 30.0 - #5 bars left & right #5
#5
X #5
#5
X
#5
#5
#5
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 49,046.3 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 1,989.0, H = 16.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.106 : 1 Top along X-X 180.818 k Bottom along X-X 180.818 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 27.044 k * Pn = 278.324 k
Maximum SERVICE Load Deflections . . .
Mu-x = -2,003.40 k-ft * Mn-x = 19,353.4 k-ft
Along Y-Y -0.000149 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 2,003.40 k-ft Mn at Angle = 18,952.7 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4481 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 16,178.1 k
Pnmin : Nominal Min. Tension Axial Capacity -1,190.40 k Reinforcing Area 19.840 in^2
Concrete Area 4,428.0 in^2
Pn, max : Usable Compressive Axial Capacity 8,412.64 k
Pn, min : Usable Tension Axial Capacity -773.76 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 68.66 8,412.63 1.000 -25.60 180.000 25.60 3,321.57 0.008
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PO1

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.20D+1.60L+0.50S+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.20D+0.50L+1.60S+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.20D+1.60S+0.50W+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 58.86 8,412.63 1.000 -25.60 180.000 25.60 3,985.29 0.006
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 75.95 1,094.61 1.000 -2,014.60 180.000 2,014.60 28,616.92 0.070
+0.90D+W+0.90H Actual 10.93 44.14 8,412.63 1.000 -14.40 180.000 14.40 2,651.17 0.005
+0.5514D+E+0.90H Actual 10.93 27.04 278.32 1.000 -2,003.40 180.000 2,003.40 18,952.74 0.106
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 1.455 1.455 k k 49.046 k
+D+L+H 1.455 1.455 k k 49.046 k
+D+Lr+H 1.455 1.455 k k 49.046 k
+D+S+H 1.455 1.455 k k 49.046 k
+D+0.750Lr+0.750L+H 1.455 1.455 k k 49.046 k
+D+0.750L+0.750S+H 1.455 1.455 k k 49.046 k
+D+0.60W+H 1.455 1.455 k k 49.046 k
+D+0.70E+H 128.027 128.027 k k 49.046 k
+D+0.750Lr+0.750L+0.450W+H 1.455 1.455 k k 49.046 k
+D+0.750L+0.750S+0.450W+H 1.455 1.455 k k 49.046 k
+D+0.750L+0.750S+0.5250E+H 96.384 96.384 k k 49.046 k
+0.60D+0.60W+0.60H 0.873 0.873 k k 29.428 k
+0.60D+0.70E+0.60H 127.445 127.445 k k 29.428 k
D Only k k 49.046 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 180.818 180.818 k k k
H Only 1.455 1.455 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 16.000 k-ft
+D+L+H k-ft 16.000 k-ft
+D+Lr+H k-ft 16.000 k-ft
+D+S+H k-ft 16.000 k-ft
+D+0.750Lr+0.750L+H k-ft 16.000 k-ft
+D+0.750L+0.750S+H k-ft 16.000 k-ft
+D+0.60W+H k-ft 16.000 k-ft
+D+0.70E+H k-ft 1,408.300 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 16.000 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 16.000 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 1,060.225 k-ft
+0.60D+0.60W+0.60H k-ft 9.600 k-ft
+0.60D+0.70E+0.60H k-ft 1,401.900 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 1,989.000 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PO1

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 16.000 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Height = 11.0 ft

#5
#5 M-y Loads
#5
#5
Height = 11.0 ft
###.##kft
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
X #5
#X5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5 Looking along X-X Axis
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) 8,875.0
Phi * Mn @ Alpha (k-ft)
8,875.0

7,987.5 7,987.5

7,100.0 7,100.0

6,212.5 6,212.5

5,325.0 5,325.0

Phi * Pn (k)

Phi * Pn (k)
4,437.5 4,437.5

3,550.0 3,550.0

2,662.5 2,662.5

1,775.0 1,775.0

887.5 887.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram

8,875.0
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,875.0

7,987.5 7,987.5

7,100.0 7,100.0

6,212.5 6,212.5

5,325.0 5,325.0

Phi * Pn (k)
Phi * Pn (k)

4,437.5 4,437.5

3,550.0 3,550.0

2,662.5 2,662.5

1,775.0 1,775.0

887.5 887.5

0.0 5,466.210,932.4
16,398.6
21,864.727,330.9
32,797.1
38,263.343,729.5
49,195.7
54,661.9 0.0 5,466.210,932.4
16,398.6
21,864.7
27,330.9
32,797.1
38,263.3
43,729.549,195.7
54,661.9
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (58.86, 25.60) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (58.86, 25.60)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PO1

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,875.0 8,875.0

7,987.5 7,987.5

7,100.0 7,100.0

6,212.5 6,212.5

5,325.0 5,325.0

Phi * Pn (k)

Phi * Pn (k)
4,437.5 4,437.5

3,550.0 3,550.0

2,662.5 2,662.5

1,775.0 1,775.0

887.5 887.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,875.0 8,875.0

7,987.5 7,987.5

7,100.0 7,100.0

6,212.5 6,212.5

5,325.0 5,325.0

Phi * Pn (k)
Phi * Pn (k)

4,437.5 4,437.5

3,550.0 3,550.0

2,662.5 2,662.5

1,775.0 1,775.0

887.5 887.5

0.0 5,466.210,932.4
16,398.6
21,864.7
27,330.9
32,797.1
38,263.3
43,729.5
49,195.7
54,661.9 0.0 5,466.210,932.4
16,398.6
21,864.727,330.9
32,797.1
38,263.343,729.5
49,195.7
54,661.9
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (75.95, 2,014.60) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (44.14, 14.40)
Concrete Shear Wall Check ( PB1)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 28 ⋅ ft h := 11 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 617 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 2 curtains of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 153.942⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 687 ⋅ kips Mu := 6007⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 489.636⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 27.0 - #5 bars left & right #5
#5
X #5
X
#5
#5
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 44,660.0 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 1,875.0, H = 25.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.126 : 1 Top along X-X 170.455 k Bottom along X-X 170.455 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 24.626 k * Pn = 200.122 k
Maximum SERVICE Load Deflections . . .
Mu-x = -1,897.50 k-ft * Mn-x = 15,376.9 k-ft
Along Y-Y -0.000186 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 1,897.50 k-ft Mn at Angle = 15,043.8 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4459 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 14,726.5 k
Pnmin : Nominal Min. Tension Axial Capacity -1,078.80 k Reinforcing Area 17.980 in^2
Concrete Area 4,032.0 in^2
Pn, max : Usable Compressive Axial Capacity 7,657.76 k
Pn, min : Usable Tension Axial Capacity -701.22 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 62.52 7,657.76 1.000 -40.00 180.000 40.00 4,928.82 0.008
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB1

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.20D+1.60L+0.50S+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.20D+0.50L+1.60S+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.20D+1.60S+0.50W+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 53.59 7,657.76 1.000 -40.00 180.000 40.00 5,459.64 0.007
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 69.16 771.27 1.000 -1,915.00 180.000 1,915.00 21,371.94 0.090
+0.90D+W+0.90H Actual 10.93 40.19 7,657.76 1.000 -22.50 180.000 22.50 4,393.19 0.005
+0.5514D+E+0.90H Actual 10.93 24.63 200.12 1.000 -1,897.50 180.000 1,897.50 15,043.81 0.126
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 2.273 2.273 k k 44.660 k
+D+L+H 2.273 2.273 k k 44.660 k
+D+Lr+H 2.273 2.273 k k 44.660 k
+D+S+H 2.273 2.273 k k 44.660 k
+D+0.750Lr+0.750L+H 2.273 2.273 k k 44.660 k
+D+0.750L+0.750S+H 2.273 2.273 k k 44.660 k
+D+0.60W+H 2.273 2.273 k k 44.660 k
+D+0.70E+H 121.591 121.591 k k 44.660 k
+D+0.750Lr+0.750L+0.450W+H 2.273 2.273 k k 44.660 k
+D+0.750L+0.750S+0.450W+H 2.273 2.273 k k 44.660 k
+D+0.750L+0.750S+0.5250E+H 91.761 91.761 k k 44.660 k
+0.60D+0.60W+0.60H 1.364 1.364 k k 26.796 k
+0.60D+0.70E+0.60H 120.682 120.682 k k 26.796 k
D Only k k 44.660 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 170.455 170.455 k k k
H Only 2.273 2.273 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 25.000 k-ft
+D+L+H k-ft 25.000 k-ft
+D+Lr+H k-ft 25.000 k-ft
+D+S+H k-ft 25.000 k-ft
+D+0.750Lr+0.750L+H k-ft 25.000 k-ft
+D+0.750L+0.750S+H k-ft 25.000 k-ft
+D+0.60W+H k-ft 25.000 k-ft
+D+0.70E+H k-ft 1,337.500 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 25.000 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 25.000 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 1,009.375 k-ft
+0.60D+0.60W+0.60H k-ft 15.000 k-ft
+0.60D+0.70E+0.60H k-ft 1,327.500 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 1,875.000 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB1

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 25.000 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5#5
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5
Height = 11.0 ft

M-y Loads
#5#5
Height = 11.0 ft
###.##kft

#5#5
#5#5
#5#5
#5#5
X #5#
#5 5
#X5
#5#5
#5#5
#5#5
#5#5
#5#5 Looking along X-X Axis
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,075.0 8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0

Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) 8,075.0
Phi * Mn @ Alpha (k-ft)
8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0
Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,075.0 8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0

Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,075.0 8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0
Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 212 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 76.825 ⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 305 ⋅ kips Mu := 1904⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 321.894⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 18.0 - #5 bars left & right #5
#5
X #5
X
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 30,836.7 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 523.0, H = 18.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.066 : 1 Top along X-X 47.545 k Bottom along X-X 47.545 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 17.003 k * Pn = 257.373 k
Maximum SERVICE Load Deflections . . .
Mu-x = -539.20 k-ft * Mn-x = 8,274.06 k-ft
Along Y-Y -0.000157 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 539.20 k-ft Mn at Angle = 8,120.56 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4454 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 10,167.4 k
Pnmin : Nominal Min. Tension Axial Capacity -744.0 k Reinforcing Area 12.40 in^2
Concrete Area 2,784.0 in^2
Pn, max : Usable Compressive Axial Capacity 5,287.07 k
Pn, min : Usable Tension Axial Capacity -483.60 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 43.17 5,287.07 1.000 -28.80 180.000 28.80 3,596.42 0.008
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB2

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.20D+1.60L+0.50S+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.20D+0.50L+1.60S+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.20D+1.60S+0.50W+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 37.00 5,287.07 1.000 -28.80 180.000 28.80 4,076.37 0.007
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 47.75 1,322.14 1.000 -551.80 180.000 551.80 15,291.44 0.036
+0.90D+W+0.90H Actual 10.93 27.75 5,287.07 1.000 -16.20 180.000 16.20 3,107.19 0.005
+0.5514D+E+0.90H Actual 10.93 17.00 257.37 1.000 -539.20 180.000 539.20 8,120.56 0.066
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 1.636 1.636 k k 30.837 k
+D+L+H 1.636 1.636 k k 30.837 k
+D+Lr+H 1.636 1.636 k k 30.837 k
+D+S+H 1.636 1.636 k k 30.837 k
+D+0.750Lr+0.750L+H 1.636 1.636 k k 30.837 k
+D+0.750L+0.750S+H 1.636 1.636 k k 30.837 k
+D+0.60W+H 1.636 1.636 k k 30.837 k
+D+0.70E+H 34.918 34.918 k k 30.837 k
+D+0.750Lr+0.750L+0.450W+H 1.636 1.636 k k 30.837 k
+D+0.750L+0.750S+0.450W+H 1.636 1.636 k k 30.837 k
+D+0.750L+0.750S+0.5250E+H 26.598 26.598 k k 30.837 k
+0.60D+0.60W+0.60H 0.982 0.982 k k 18.502 k
+0.60D+0.70E+0.60H 34.264 34.264 k k 18.502 k
D Only k k 30.837 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 47.545 47.545 k k k
H Only 1.636 1.636 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 18.000 k-ft
+D+L+H k-ft 18.000 k-ft
+D+Lr+H k-ft 18.000 k-ft
+D+S+H k-ft 18.000 k-ft
+D+0.750Lr+0.750L+H k-ft 18.000 k-ft
+D+0.750L+0.750S+H k-ft 18.000 k-ft
+D+0.60W+H k-ft 18.000 k-ft
+D+0.70E+H k-ft 384.100 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 18.000 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 18.000 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 292.575 k-ft
+0.60D+0.60W+0.60H k-ft 10.800 k-ft
+0.60D+0.70E+0.60H k-ft 376.900 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 523.000 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB2

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 18.000 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5#5
#5#5
#5#5
#5#5
#5#5
M-y Loads
Height = 11.0 ft

#5#5 541.00kft

Height = 11.0 ft
#5#5
#5#5
#5#5
X #5#5
X
#5#5
#5#5
#5#5
#5#5
Looking along X-X Axis
#5#5
#5#5
#5#5
#5#5
#5#5
#5#5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) 5,600.0
Phi * Mn @ Alpha (k-ft)
5,600.0

5,040.0 5,040.0

4,480.0 4,480.0

3,920.0 3,920.0

3,360.0 3,360.0

Phi * Pn (k)

Phi * Pn (k)
2,800.0 2,800.0

2,240.0 2,240.0

1,680.0 1,680.0

1,120.0 1,120.0

560.0 560.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,600.0 5,600.0

5,040.0 5,040.0

4,480.0 4,480.0

3,920.0 3,920.0

3,360.0 3,360.0
Phi * Pn (k)

Phi * Pn (k)
2,800.0 2,800.0

2,240.0 2,240.0

1,680.0 1,680.0

1,120.0 1,120.0

560.0 560.0

0.0 2,158.34,316.56,474.88,633.010,791.3
12,949.5
15,107.817,266.1
19,424.3
21,582.6 0.0 2,158.34,316.56,474.88,633.010,791.3
12,949.5
15,107.817,266.1
19,424.3
21,582.6
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (37.00, 28.80) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (37.00, 28.80)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB2

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,600.0 5,600.0

5,040.0 5,040.0

4,480.0 4,480.0

3,920.0 3,920.0

3,360.0 3,360.0

Phi * Pn (k)

Phi * Pn (k)
2,800.0 2,800.0

2,240.0 2,240.0

1,680.0 1,680.0

1,120.0 1,120.0

560.0 560.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,600.0 5,600.0

5,040.0 5,040.0

4,480.0 4,480.0

3,920.0 3,920.0

3,360.0 3,360.0
Phi * Pn (k)

Phi * Pn (k)
2,800.0 2,800.0

2,240.0 2,240.0

1,680.0 1,680.0

1,120.0 1,120.0

560.0 560.0

0.0 2,158.34,316.56,474.88,633.010,791.3
12,949.5
15,107.817,266.1
19,424.3
21,582.6 0.0 2,158.34,316.56,474.88,633.010,791.3
12,949.5
15,107.817,266.1
19,424.3
21,582.6
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (47.75, 551.80) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (27.75, 16.20)
Concrete Shear Wall Check ( PA8)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 14 ⋅ in lwall := 9.6 ⋅ ft h := 11 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 8 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

 n ⋅ As_horiz  −3
ρt := max  0.0025 ,  ρt = 2.5 × 10
 twall⋅ spacing 
( Horiz. reinforcement ratio )
 h  h h 
α := if  ≤ 1.5 , 3 , if  > 2 , 2 , 6 − 2⋅  ( 21.7.4.1 )
 lwall  lwall lwall  

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 203.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 5.048 ⋅ psi < ϕVn = 203.842⋅ psi O.K.
Acv

Therefore, use 14" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 118 ⋅ kips Mu := 86 ⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 106.492⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Edge Cover = 2.0in #5#5

#5#5
#5#5
#5#5

Column Reinforcing : 4 - #5 bars @ corners,, 9.0 - #5 bars left & right

#5#5
X #5#5
X

between corner bars #5#5

#5#5
#5#5
#5#5
#5#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 17,833.0 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 60.0, H = 2.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.016 : 1 Top along X-X 5.455 k Bottom along X-X 5.455 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 9.833 k * Pn = 617.52 k
Maximum SERVICE Load Deflections . . .
Mu-x = -61.80 k-ft * Mn-x = 3,933.44 k-ft
Along Y-Y -0.000127 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 61.80 k-ft Mn at Angle = 3,899.28 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4236 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 5,860.01 k
Pnmin : Nominal Min. Tension Axial Capacity -409.20 k Reinforcing Area 6.820 in^2
Concrete Area 1,610.0 in^2
Pn, max : Usable Compressive Axial Capacity 3,047.21 k
Pn, min : Usable Tension Axial Capacity -265.980 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 24.97 3,047.21 1.000 -3.20 180.000 3.20 383.18 0.008
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA8

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.20D+1.60L+0.50S+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.20D+0.50L+1.60S+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.20D+1.60S+0.50W+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 21.40 3,047.21 1.000 -3.20 180.000 3.20 457.59 0.007
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 27.62 2,033.42 1.000 -63.20 180.000 63.20 4,659.82 0.014
+0.90D+W+0.90H Actual 10.93 16.05 3,047.21 1.000 -1.80 180.000 1.80 308.11 0.006
+0.5514D+E+0.90H Actual 10.93 9.83 617.52 1.000 -61.80 180.000 61.80 3,899.28 0.016
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 0.182 0.182k k 17.833 k
+D+L+H 0.182 0.182k k 17.833 k
+D+Lr+H 0.182 0.182k k 17.833 k
+D+S+H 0.182 0.182k k 17.833 k
+D+0.750Lr+0.750L+H 0.182 0.182k k 17.833 k
+D+0.750L+0.750S+H 0.182 0.182k k 17.833 k
+D+0.60W+H 0.182 0.182k k 17.833 k
+D+0.70E+H 4.000 4.000k k 17.833 k
+D+0.750Lr+0.750L+0.450W+H 0.182 0.182k k 17.833 k
+D+0.750L+0.750S+0.450W+H 0.182 0.182k k 17.833 k
+D+0.750L+0.750S+0.5250E+H 3.045 3.045k k 17.833 k
+0.60D+0.60W+0.60H 0.109 0.109k k 10.700 k
+0.60D+0.70E+0.60H 3.927 3.927k k 10.700 k
D Only k k 17.833 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 5.455 5.455 k k k
H Only 0.182 0.182 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 2.000 k-ft
+D+L+H k-ft 2.000 k-ft
+D+Lr+H k-ft 2.000 k-ft
+D+S+H k-ft 2.000 k-ft
+D+0.750Lr+0.750L+H k-ft 2.000 k-ft
+D+0.750L+0.750S+H k-ft 2.000 k-ft
+D+0.60W+H k-ft 2.000 k-ft
+D+0.70E+H k-ft 44.000 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 2.000 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 2.000 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 33.500 k-ft
+0.60D+0.60W+0.60H k-ft 1.200 k-ft
+0.60D+0.70E+0.60H k-ft 43.200 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 60.000 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA8

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 2.000 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 6.423 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 6.423 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 6.423 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5 #5

#5 #5
M-y Loads
#5 #5 62.00kft
Height = 11.0 ft

#5 #5 Height = 11.0 ft

#5 #5
X X
#5 #5

#5 #5

#5 #5 Looking along X-X Axis

#5 #5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
3,225.0 3,225.0

2,902.5 2,902.5

2,580.0 2,580.0

2,257.5 2,257.5

1,935.0 1,935.0

Phi * Pn (k)

Phi * Pn (k)
1,612.5 1,612.5

1,290.0 1,290.0

967.5 967.5

645.0 645.0

322.5 322.5

0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8 0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8

Load Comb. = +1.40D+1.60H, Alpha= 180.0deg, (24.97, 3.20) Load Comb. = +1.20D+0.50Lr+1.60L+1.60H, Alpha= 180.0deg, (21.40, 3.20)

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) 3,225.0
Phi * Mn @ Alpha (k-ft)
3,225.0

2,902.5 2,902.5

2,580.0 2,580.0

2,257.5 2,257.5

1,935.0 1,935.0
Phi * Pn (k)

Phi * Pn (k)
1,612.5 1,612.5

1,290.0 1,290.0

967.5 967.5

645.0 645.0

322.5 322.5

0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8 0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8

Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (21.40, 3.20) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (21.40, 3.20)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA8

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
3,225.0 3,225.0

2,902.5 2,902.5

2,580.0 2,580.0

2,257.5 2,257.5

1,935.0 1,935.0

Phi * Pn (k)

Phi * Pn (k)
1,612.5 1,612.5

1,290.0 1,290.0

967.5 967.5

645.0 645.0

322.5 322.5

0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8 0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8

Load Comb. = +1.20D+1.60S+0.50W+1.60H, Alpha= 180.0deg, (21.40, 3.20) Load Comb. = +1.20D+0.50Lr+0.50L+W+1.60H, Alpha= 180.0deg, (21.40, 3.20)

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
3,225.0 3,225.0

2,902.5 2,902.5

2,580.0 2,580.0

2,257.5 2,257.5

1,935.0 1,935.0
Phi * Pn (k)

Phi * Pn (k)
1,612.5 1,612.5

1,290.0 1,290.0

967.5 967.5

645.0 645.0

322.5 322.5

0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8 0.0 614.3 1,228.61,842.82,457.13,071.43,685.74,299.94,914.25,528.56,142.8

Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (27.62, 63.20) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (16.05, 1.80)
Concrete Shear Wall Check ( P74)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 30 ⋅ ft h := 10 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 397 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 92.412⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 350 ⋅ kips Mu := 2860⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 213.426⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

.
Code References
Calculations per ACI 318-11, IBC 2012, CBC 2013, ASCE 7-10
Load Combinations Used : ASCE 7-10
General Information
f'c : Concrete 28 day strength = 4.0 ksi Overall Column Height = 10.0 ft
E= = 3,605.0 ksi End Fixity Top Fixed, Bottom Fixed
Density = 145.0 pcf Brace condition for deflection (buckling) along columns :
= 0.850 X-X (width) axis :
fy - Main Rebar = 60.0 ksi Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
E - Main Rebar = 29,000.0 ksi Y-Y (depth) axis :
Allow. Reinforcing Limits ASTM A615 Bars Used Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
Min. Reinf. = 0.250 %
Max. Reinf. = 8.0 %
Load Combination : ASCE 7-10
..
Column Cross Section
Column Dimensions :360.0in high x 12.0in Wide, Column Edge to Rebar Y

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 29.0 - #5 bars left & right #5
#5
X #5
X
#5
#5
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 43,500.0 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 1,691.0, H = 170.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 9.933 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.101 : 1 Top along X-X 13.117 k Bottom along X-X 13.117 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 23.986 k * Pn = 216.546 k
Maximum SERVICE Load Deflections . . .
Mu-x = 1,747.34 k-ft * Mn-x = 17,645.1 k-ft
Along Y-Y 0.0 in at 0.0 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination :
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 1,747.34 k-ft Mn at Angle = 17,262.7 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4449 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 15,775.9 k
Pnmin : Nominal Min. Tension Axial Capacity -1,153.20 k Reinforcing Area 19.220 in^2
Concrete Area 4,320.0 in^2
Pn, max : Usable Compressive Axial Capacity 8,203.44 k
Pn, min : Usable Tension Axial Capacity -749.58 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 9.93 60.90 7,315.68 1.000 257.74 180.000 257.74 31,028.59 0.008
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P74

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.20D+1.60L+0.50S+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.20D+1.60Lr+0.50L+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.20D+1.60Lr+0.50W+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.20D+0.50L+1.60S+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.20D+1.60S+0.50W+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.20D+0.50Lr+0.50L+W+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.20D+0.50L+0.50S+W+1.60H Actual 9.93 52.20 6,873.47 1.000 257.74 180.000 257.74 33,757.16 0.008
+1.549D+0.50L+0.20S+E+1.60H Actual 9.93 67.36 950.72 1.000 1,860.10 180.000 1,860.10 25,882.72 0.072
+0.90D+W+0.90H Actual 9.93 39.15 7,669.11 1.000 144.98 180.000 144.98 28,466.54 0.005
+0.5514D+E+0.90H Actual 9.93 23.99 216.55 1.000 1,747.34 180.000 1,747.34 17,262.68 0.101
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 1.319 1.319 k k 43.500 k
+D+L+H 1.319 1.319 k k 43.500 k
+D+Lr+H 1.319 1.319 k k 43.500 k
+D+S+H 1.319 1.319 k k 43.500 k
+D+0.750Lr+0.750L+H 1.319 1.319 k k 43.500 k
+D+0.750L+0.750S+H 1.319 1.319 k k 43.500 k
+D+0.60W+H 1.319 1.319 k k 43.500 k
+D+0.70E+H 10.501 10.501 k k 43.500 k
+D+0.750Lr+0.750L+0.450W+H 1.319 1.319 k k 43.500 k
+D+0.750L+0.750S+0.450W+H 1.319 1.319 k k 43.500 k
+D+0.750L+0.750S+0.5250E+H 8.205 8.205 k k 43.500 k
+0.60D+0.60W+0.60H 0.791 0.791 k k 26.100 k
+0.60D+0.70E+0.60H 9.973 9.973 k k 26.100 k
D Only k k 43.500 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 13.117 13.117 k k k
H Only 1.319 1.319 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 161.089 4.276 k-ft
+D+L+H k-ft 161.089 4.276 k-ft
+D+Lr+H k-ft 161.089 4.276 k-ft
+D+S+H k-ft 161.089 4.276 k-ft
+D+0.750Lr+0.750L+H k-ft 161.089 4.276 k-ft
+D+0.750L+0.750S+H k-ft 161.089 4.276 k-ft
+D+0.60W+H k-ft 161.089 4.276 k-ft
+D+0.70E+H k-ft 1,282.739 34.048 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 161.089 4.276 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 161.089 4.276 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 1,002.326 26.605 k-ft
+0.60D+0.60W+0.60H k-ft 96.653 2.566 k-ft
+0.60D+0.70E+0.60H k-ft 1,218.304 32.338 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 1,602.358 42.532 k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P74

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft 161.089 4.276 k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Height = 10.0 ft

#5
#5 M-y Loads
Height = 10.0 ft
###.##kft
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
X #5
#X5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5 Looking along X-X Axis
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,650.0 8,650.0

7,785.0 7,785.0

6,920.0 6,920.0

6,055.0 6,055.0

5,190.0 5,190.0

Phi * Pn (k)

Phi * Pn (k)
4,325.0 4,325.0

3,460.0 3,460.0

2,595.0 2,595.0

1,730.0 1,730.0

865.0 865.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,650.0 8,650.0

7,785.0 7,785.0

6,920.0 6,920.0

6,055.0 6,055.0

5,190.0 5,190.0
Phi * Pn (k)

Phi * Pn (k)
4,325.0 4,325.0

3,460.0 3,460.0

2,595.0 2,595.0

1,730.0 1,730.0

865.0 865.0

0.0 5,197.710,395.4
15,593.1
20,790.925,988.6
31,186.3
36,384.041,581.7
46,779.4
51,977.2 0.0 5,197.710,395.4
15,593.1
20,790.925,988.6
31,186.3
36,384.041,581.7
46,779.4
51,977.2
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (52.20, 257.74) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (52.20, 257.74)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P74

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,650.0 8,650.0

7,785.0 7,785.0

6,920.0 6,920.0

6,055.0 6,055.0

5,190.0 5,190.0

Phi * Pn (k)

Phi * Pn (k)
4,325.0 4,325.0

3,460.0 3,460.0

2,595.0 2,595.0

1,730.0 1,730.0

865.0 865.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram

8,650.0
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,650.0

7,785.0 7,785.0

6,920.0 6,920.0

6,055.0 6,055.0

5,190.0 5,190.0

Phi * Pn (k)
Phi * Pn (k)

4,325.0 4,325.0

3,460.0 3,460.0

2,595.0 2,595.0

1,730.0 1,730.0

865.0 865.0

0.0 5,197.710,395.4
15,593.1
20,790.925,988.6
31,186.3
36,384.041,581.7
46,779.4
51,977.2 0.0 5,197.710,395.4
15,593.1
20,790.9
25,988.6
31,186.3
36,384.0
41,581.746,779.4
51,977.2
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (67.36, 1,860.10) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (39.15, 144.98)
Concrete Shear Wall Check ( PO2)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 36 ⋅ ft h := 10 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 569 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 110.271 ⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 1892⋅ kips Mu := 3406⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 474.473⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

.
Code References
Calculations per ACI 318-11, IBC 2012, CBC 2013, ASCE 7-10
Load Combinations Used : ASCE 7-10
General Information
f'c : Concrete 28 day strength = 4.0 ksi Overall Column Height = 10.0 ft
E= = 3,605.0 ksi End Fixity Top & Bottom Pinned
Density = 145.0 pcf Brace condition for deflection (buckling) along columns :
= 0.850 X-X (width) axis :
fy - Main Rebar = 60.0 ksi Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
E - Main Rebar = 29,000.0 ksi Y-Y (depth) axis :
Allow. Reinforcing Limits ASTM A615 Bars Used Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
Min. Reinf. = 0.250 %
Max. Reinf. = 8.0 %
Load Combination : ASCE 7-10
..
Column Cross Section
Column Dimensions :432.0in high x 12.0in Wide, Column Edge to Rebar Y

Edge Cover = 2.0in #5

#5
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
Column Reinforcing : 4 - #5 bars @ corners,, 35.0 - #6 bars left & right #6
#6
#6
#6
X #6
X
#6
#6
#6
#6
#6
#6
#6
between corner bars #6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 52,200.0 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 2,239.0, H = 65.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 9.933 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.065 : 1 Top along X-X 223.90 k Bottom along X-X 223.90 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 28.783 k * Pn = 470.226 k
Maximum SERVICE Load Deflections . . .
Mu-x = -2,282.08 k-ft * Mn-x = 35,433.1 k-ft
Along Y-Y -.0000860 in at 5.839 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 2,282.08 k-ft Mn at Angle = 34,897.7 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.6181 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 19,439.1 k
Pnmin : Nominal Min. Tension Axial Capacity -1,922.40 k Reinforcing Area 32.040 in^2
Concrete Area 5,184.0 in^2
Pn, max : Usable Compressive Axial Capacity 10,108.3 k
Pn, min : Usable Tension Axial Capacity -1,249.56 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 9.93 73.0810,108.31 1.000 -103.30 180.000 103.30 14,311.70 0.007
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PO2

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.20D+1.60L+0.50S+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.20D+1.60Lr+0.50L+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.20D+1.60Lr+0.50W+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.20D+0.50L+1.60S+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.20D+1.60S+0.50W+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.20D+0.50Lr+0.50L+W+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.20D+0.50L+0.50S+W+1.60H Actual 9.93 62.6410,108.31 1.000 -103.30 180.000 103.30 16,866.82 0.006
+1.549D+0.50L+0.20S+E+1.60H Actual 9.93 80.84 1,782.87 1.000 -2,327.28 180.000 2,327.28 51,217.90 0.045
+0.90D+W+0.90H Actual 9.93 46.9810,108.31 1.000 -58.11 180.000 58.11 12,562.06 0.005
+0.5514D+E+0.90H Actual 9.93 28.78 470.23 1.000 -2,282.08 180.000 2,282.08 34,897.67 0.065
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 6.500 6.500 k k 52.200 k
+D+L+H 6.500 6.500 k k 52.200 k
+D+Lr+H 6.500 6.500 k k 52.200 k
+D+S+H 6.500 6.500 k k 52.200 k
+D+0.750Lr+0.750L+H 6.500 6.500 k k 52.200 k
+D+0.750L+0.750S+H 6.500 6.500 k k 52.200 k
+D+0.60W+H 6.500 6.500 k k 52.200 k
+D+0.70E+H 163.230 163.230 k k 52.200 k
+D+0.750Lr+0.750L+0.450W+H 6.500 6.500 k k 52.200 k
+D+0.750L+0.750S+0.450W+H 6.500 6.500 k k 52.200 k
+D+0.750L+0.750S+0.5250E+H 124.048 124.048 k k 52.200 k
+0.60D+0.60W+0.60H 3.900 3.900 k k 31.320 k
+0.60D+0.70E+0.60H 160.630 160.630 k k 31.320 k
D Only k k 52.200 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 223.900 223.900 k k k
H Only 6.500 6.500 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft k-ft
+D+L+H k-ft k-ft
+D+Lr+H k-ft k-ft
+D+S+H k-ft k-ft
+D+0.750Lr+0.750L+H k-ft k-ft
+D+0.750L+0.750S+H k-ft k-ft
+D+0.60W+H k-ft k-ft
+D+0.70E+H k-ft k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.5250E+H k-ft k-ft
+0.60D+0.60W+0.60H k-ft k-ft
+0.60D+0.70E+0.60H k-ft k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft k-ft
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PO2

Maximum Moments Note: Only non-zero reactions are listed.

#5
#5
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
Height = 10.0 ft

#6
#6 M-y Loads
Height = 10.0 ft
###.##kft
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
X #6
X
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6 Looking along X-X Axis
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#6
#5
#5

Y Looking along Y-Y Axis

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
10,650.0 10,650.0

9,585.0 9,585.0

8,520.0 8,520.0

7,455.0 7,455.0

6,390.0 6,390.0

Phi * Pn (k)

Phi * Pn (k)
5,325.0 5,325.0

4,260.0 4,260.0

3,195.0 3,195.0

2,130.0 2,130.0

1,065.0 1,065.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
10,650.0 10,650.0

9,585.0 9,585.0

8,520.0 8,520.0

7,455.0 7,455.0

6,390.0 6,390.0
Phi * Pn (k)

Phi * Pn (k)
5,325.0 5,325.0

4,260.0 4,260.0

3,195.0 3,195.0

2,130.0 2,130.0

1,065.0 1,065.0

0.0 7,834.415,668.8
23,503.2
31,337.6
39,172.0
47,006.4
54,840.8
62,675.2
70,509.6
78,344.0 0.0 7,834.415,668.8
23,503.2
31,337.6
39,172.0
47,006.4
54,840.8
62,675.2
70,509.6
78,344.0
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (62.64, 103.30) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (62.64, 103.30)
File = C:\Users\Jon\Desktop\CONCRE~1.EC6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.10.6, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PO2

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
10,650.0 10,650.0

9,585.0 9,585.0

8,520.0 8,520.0

7,455.0 7,455.0

6,390.0 6,390.0

Phi * Pn (k)
Phi * Pn (k)
5,325.0 5,325.0

4,260.0 4,260.0

3,195.0 3,195.0

2,130.0 2,130.0

1,065.0 1,065.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
10,650.0 10,650.0

9,585.0 9,585.0

8,520.0 8,520.0

7,455.0 7,455.0

6,390.0 6,390.0
Phi * Pn (k)

Phi * Pn (k)
5,325.0 5,325.0

4,260.0 4,260.0

3,195.0 3,195.0

2,130.0 2,130.0

1,065.0 1,065.0

0.0 7,834.415,668.8
23,503.2
31,337.6
39,172.0
47,006.4
54,840.8
62,675.2
70,509.6
78,344.0 0.0 7,834.415,668.8
23,503.2
31,337.6
39,172.0
47,006.4
54,840.8
62,675.2
70,509.6
78,344.0
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (80.84, 2,327.28) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (46.98, 58.11)
Concrete Shear Wall Check ( PB5)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 17.5 ⋅ ft h := 10 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 70 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 28.045 ⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 12" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 400 ⋅ kips Mu := 487 ⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 224.989⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB5

Code References .
Calculations per ACI 318-11, IBC 2012, CBC 2013, ASCE 7-10
Load Combinations Used : ASCE 7-10
General Information
f'c : Concrete 28 day strength = 4.0 ksi Overall Column Height = 10.0 ft
E= = 3,605.0 ksi End Fixity Top & Bottom Pinned
Density = 145.0 pcf Brace condition for deflection (buckling) along columns :
β = 0.850 X-X (width) axis :
fy - Main Rebar = 60.0 ksi Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
E - Main Rebar = 29,000.0 ksi Y-Y (depth) axis :
Allow. Reinforcing Limits ASTM A615 Bars Used Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
Min. Reinf. = 0.250 %
Max. Reinf. = 8.0 %
Load Combination : ASCE 7-10
..
Column Cross Section
Y
Column Dimensions :210.0in high x 12.0in Wide, Column Edge to Rebar
Edge Cover = 2.0in #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 16.0 - #5 bars left & right X #5
X
#5
#5
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads Entered loads are factored per load combinations specified by user.
.

Column self weight included : 25,375.0 lbs * Dead Load Factor

BENDING LOADS . . .
Moment acting about X-X axis, E = 235.0, H = 4.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 9.933 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.028 : 1 Top along X-X 23.50 k Bottom along X-X 23.50 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 13.992 k ϕ * Pn = 485.063 k
Mu-x = -236.999 k-ft ϕ * Mn-x = 8,472.0 k-ft
Maximum SERVICE Load Deflections . . .
Mu-y = 0.0 k-ft ϕ * Mn-y = 0.0 k-ft
Along Y-Y -.0000790 in at 5.839 ft above base
for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0 in at 0.0 ft above base
Mu at Angle = 236.999 k-ft ϕMn at Angle = 8,355.57 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . .ϕ. = 0.650 β = 0.850 θ = 0.80
Column Capacities . . .
Pnmax : Nominal Max. Compressive Axial Capacity 9,199.66 k
ρ : % Reinforcing 0.4429 % Rebar % Ok
Pnmin : Nominal Min. Tension Axial Capacity -669.60 k Reinforcing Area 11.160 in^2
ϕ Pn, max : Usable Compressive Axial Capacity 4,783.82 k Concrete Area 2,520.0 in^2
ϕ Pn, min : Usable Tension Axial Capacity -435.240 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination
X-X Y-Y base ft Pu ϕ * Pn δ x δ x * Mux δ y δy * Muy Alpha (deg) δ Mu ϕ Mn Ratio
+1.40D+1.60H Actual 9.93 35.53 4,783.82 1.000 -6.36 180.000 6.36 865.10 0.007
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB5

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination
X-X Y-Y base ft Pu ϕ * Pn δx δ x * Mux δy δ y * Muy Alpha (deg) δ Mu ϕ Mn
Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.20D+1.60L+0.50S+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.20D+1.60Lr+0.50L+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.20D+1.60Lr+0.50W+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.20D+0.50L+1.60S+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.20D+1.60S+0.50W+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.20D+0.50Lr+0.50L+W+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.20D+0.50L+0.50S+W+1.60H Actual 9.93 30.45 4,783.82 1.000 -6.36 180.000 6.36 1,082.76 0.006
+1.549D+0.50L+0.20S+E+1.60H Actual 9.93 39.30 2,544.18 1.000 -239.78 180.000 239.78 15,559.57 0.015
+0.90D+W+0.90H Actual 9.93 22.84 4,783.82 1.000 -3.58 180.000 3.58 648.41 0.005
+0.5514D+E+0.90H Actual 9.93 13.99 485.06 1.000 -237.00 180.000 237.00 8,355.57 0.028
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 0.400 0.400 k k 25.375 k
+D+L+H 0.400 0.400 k k 25.375 k
+D+Lr+H 0.400 0.400 k k 25.375 k
+D+S+H 0.400 0.400 k k 25.375 k
+D+0.750Lr+0.750L+H 0.400 0.400 k k 25.375 k
+D+0.750L+0.750S+H 0.400 0.400 k k 25.375 k
+D+0.60W+H 0.400 0.400 k k 25.375 k
+D+0.70E+H 16.850 16.850 k k 25.375 k
+D+0.750Lr+0.750L+0.450W+H 0.400 0.400 k k 25.375 k
+D+0.750L+0.750S+0.450W+H 0.400 0.400 k k 25.375 k
+D+0.750L+0.750S+0.5250E+H 12.738 12.738 k k 25.375 k
+0.60D+0.60W+0.60H 0.240 0.240 k k 15.225 k
+0.60D+0.70E+0.60H 16.690 16.690 k k 15.225 k
D Only k k 25.375 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 23.500 23.500 k k k
H Only 0.400 0.400 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft k-ft
+D+L+H k-ft k-ft
+D+Lr+H k-ft k-ft
+D+S+H k-ft k-ft
+D+0.750Lr+0.750L+H k-ft k-ft
+D+0.750L+0.750S+H k-ft k-ft
+D+0.60W+H k-ft k-ft
+D+0.70E+H k-ft k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.5250E+H k-ft k-ft
+0.60D+0.60W+0.60H k-ft k-ft
+0.60D+0.70E+0.60H k-ft k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft k-ft
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB5

Maximum Moments Note: Only non-zero reactions are listed.

#5#5
#5#5
#5#5
#5#5
#5#5 M-y Loads
Height = 10.0 ft

239.00kft

#5#5 Height = 10.0 ft

#5#5
#5#5
X #5#5
X
#5#5
#5#5
#5#5
#5#5 Looking along X-X Axis
#5#5
#5#5
#5#5
#5#5
#5#5

Y Looking along Y-Y Axis

Interaction Diagrams .
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram

5,050.0
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,050.0

4,545.0 4,545.0

4,040.0 4,040.0

3,535.0 3,535.0

3,030.0 3,030.0

Phi * Pn (k)
Phi * Pn (k)
2,525.0 2,525.0

2,020.0 2,020.0

1,515.0 1,515.0

1,010.0 1,010.0

505.0 505.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,050.0 5,050.0

4,545.0 4,545.0

4,040.0 4,040.0

3,535.0 3,535.0

3,030.0 3,030.0
Phi * Pn (k)

Phi * Pn (k)
2,525.0 2,525.0

2,020.0 2,020.0

1,515.0 1,515.0

1,010.0 1,010.0

505.0 505.0

0.0 1,766.43,532.85,299.37,065.78,832.110,598.5
12,364.9
14,131.4
15,897.8
17,664.2 0.0 1,766.43,532.85,299.37,065.78,832.110,598.5
12,364.9
14,131.4
15,897.8
17,664.2
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (30.45, 6.36) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (30.45, 6.36)
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PB5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,050.0 5,050.0

4,545.0 4,545.0

4,040.0 4,040.0

3,535.0 3,535.0

3,030.0 3,030.0

Phi * Pn (k)

Phi * Pn (k)
2,525.0 2,525.0

2,020.0 2,020.0

1,515.0 1,515.0

1,010.0 1,010.0

505.0 505.0

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
5,050.0 5,050.0

4,545.0 4,545.0

4,040.0 4,040.0

3,535.0 3,535.0

3,030.0 3,030.0
Phi * Pn (k)

Phi * Pn (k)
2,525.0 2,525.0

2,020.0 2,020.0

1,515.0 1,515.0

1,010.0 1,010.0

505.0 505.0

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 30 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 203.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 17.887⋅ psi < ϕVn = 203.842⋅ psi O.K.
Acv

Therefore, use 14" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 244 ⋅ kips Mu := 308 ⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 249.865⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA2

Code References .
Calculations per ACI 318-11, IBC 2012, CBC 2013, ASCE 7-10
Load Combinations Used : ASCE 7-10
General Information
f'c : Concrete 28 day strength = 4.0 ksi Overall Column Height = 10.0 ft
E= = 3,605.0 ksi End Fixity Top & Bottom Pinned
Density = 145.0 pcf Brace condition for deflection (buckling) along columns :
β = 0.850 X-X (width) axis :
fy - Main Rebar = 60.0 ksi Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
E - Main Rebar = 29,000.0 ksi Y-Y (depth) axis :
Allow. Reinforcing Limits ASTM A615 Bars Used Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
Min. Reinf. = 0.250 %
Max. Reinf. = 8.0 %
Load Combination : ASCE 7-10
..
Column Cross Section
Y
Column Dimensions :122.0in high x 12.0in Wide, Column Edge to Rebar
Edge Cover = 2.0in #5#5
#5#5
#5#5
#5#5
#5#5
Column Reinforcing : 4 - #5 bars @ corners,, 9.0 - #5 bars left & right X #5#5
X

between corner bars #5#5

#5#5
#5#5
#5#5
#5#5
Y

Applied Loads Entered loads are factored per load combinations specified by user.
.

Column self weight included : 14,741.7 lbs * Dead Load Factor

BENDING LOADS . . .
Moment acting about X-X axis, E = 304.0, H = 3.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 9.933 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.152 : 1 Top along X-X 30.40 k Bottom along X-X 30.40 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 8.129 k ϕ * Pn = 59.531 k
Mu-x = -304.642 k-ft ϕ * Mn-x = 2,050.15 k-ft
Maximum SERVICE Load Deflections . . .
Mu-y = 0.0 k-ft ϕ * Mn-y = 0.0 k-ft
Along Y-Y -0.000519 in at 5.839 ft above base
for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0 in at 0.0 ft above base
Mu at Angle = 304.642 k-ft ϕMn at Angle = 2,005.40 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . .ϕ. = 0.650 β = 0.850 θ = 0.80
Column Capacities . . .
Pnmax : Nominal Max. Compressive Axial Capacity 5,363.61 k
ρ : % Reinforcing 0.4658 % Rebar % Ok
Pnmin : Nominal Min. Tension Axial Capacity -409.20 k Reinforcing Area 6.820 in^2
ϕ Pn, max : Usable Compressive Axial Capacity 2,789.08 k Concrete Area 1,464.0 in^2
ϕ Pn, min : Usable Tension Axial Capacity -265.980 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination
X-X Y-Y base ft Pu ϕ * Pn δ x δ x * Mux δ y δy * Muy Alpha (deg) δ Mu ϕ Mn Ratio
+1.40D+1.60H Actual 9.93 20.64 2,789.08 1.000 -4.77 180.000 4.77 654.39 0.007
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA2

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination
X-X Y-Y base ft Pu ϕ * Pn δx δ x * Mux δy δ y * Muy Alpha (deg) δ Mu ϕ Mn
Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.20D+1.60L+0.50S+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.20D+1.60Lr+0.50L+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.20D+1.60Lr+0.50W+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.20D+0.50L+1.60S+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.20D+1.60S+0.50W+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.20D+0.50Lr+0.50L+W+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.20D+0.50L+0.50S+W+1.60H Actual 9.93 17.69 2,789.08 1.000 -4.77 180.000 4.77 724.03 0.007
+1.549D+0.50L+0.20S+E+1.60H Actual 9.93 22.83 184.71 1.000 -306.73 180.000 306.73 2,524.64 0.121
+0.90D+W+0.90H Actual 9.93 13.27 2,789.08 1.000 -2.68 180.000 2.68 582.80 0.005
+0.5514D+E+0.90H Actual 9.93 8.13 59.53 1.000 -304.64 180.000 304.64 2,005.40 0.152
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 0.300 0.300 k k 14.742 k
+D+L+H 0.300 0.300 k k 14.742 k
+D+Lr+H 0.300 0.300 k k 14.742 k
+D+S+H 0.300 0.300 k k 14.742 k
+D+0.750Lr+0.750L+H 0.300 0.300 k k 14.742 k
+D+0.750L+0.750S+H 0.300 0.300 k k 14.742 k
+D+0.60W+H 0.300 0.300 k k 14.742 k
+D+0.70E+H 21.580 21.580 k k 14.742 k
+D+0.750Lr+0.750L+0.450W+H 0.300 0.300 k k 14.742 k
+D+0.750L+0.750S+0.450W+H 0.300 0.300 k k 14.742 k
+D+0.750L+0.750S+0.5250E+H 16.260 16.260 k k 14.742 k
+0.60D+0.60W+0.60H 0.180 0.180 k k 8.845 k
+0.60D+0.70E+0.60H 21.460 21.460 k k 8.845 k
D Only k k 14.742 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 30.400 30.400 k k k
H Only 0.300 0.300 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft k-ft
+D+L+H k-ft k-ft
+D+Lr+H k-ft k-ft
+D+S+H k-ft k-ft
+D+0.750Lr+0.750L+H k-ft k-ft
+D+0.750L+0.750S+H k-ft k-ft
+D+0.60W+H k-ft k-ft
+D+0.70E+H k-ft k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.5250E+H k-ft k-ft
+0.60D+0.60W+0.60H k-ft k-ft
+0.60D+0.70E+0.60H k-ft k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft k-ft
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA2

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+Lr+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.60W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft 0.000 in 0.000 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 5.839 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.001 in 5.839 ft
H Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Sketches .
Y

#5 #5

#5 #5
M-y Loads 307.00kft
#5 #5
Height = 10.0 ft

#5 #5 Height = 10.0 ft

#5 #5
X X
#5 #5

#5 #5

#5 #5
Looking along X-X Axis
#5 #5

#5 #5

Y Looking along Y-Y Axis

Interaction Diagrams .
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA2

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
2,975.0 2,975.0

2,677.5 2,677.5

2,380.0 2,380.0

2,082.5 2,082.5

1,785.0 1,785.0

Phi * Pn (k)
Phi * Pn (k)
1,487.5 1,487.5

1,190.0 1,190.0

892.5 892.5

595.0 595.0

297.5 297.5

0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6 0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6

Load Comb. = +1.40D+1.60H, Alpha= 180.0deg, (20.64, 4.77) Load Comb. = +1.20D+0.50Lr+1.60L+1.60H, Alpha= 180.0deg, (17.69, 4.77)

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
2,975.0 2,975.0

2,677.5 2,677.5

2,380.0 2,380.0

2,082.5 2,082.5

1,785.0 1,785.0
Phi * Pn (k)

Phi * Pn (k)
1,487.5 1,487.5

1,190.0 1,190.0

892.5 892.5

595.0 595.0

297.5 297.5

0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6 0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6

Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (17.69, 4.77) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (17.69, 4.77)
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:34PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : PA2

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
2,975.0 2,975.0

2,677.5 2,677.5

2,380.0 2,380.0

2,082.5 2,082.5

1,785.0 1,785.0

Phi * Pn (k)

Phi * Pn (k)
1,487.5 1,487.5

1,190.0 1,190.0

892.5 892.5

595.0 595.0

297.5 297.5

0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6 0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6

Load Comb. = +1.20D+1.60S+0.50W+1.60H, Alpha= 180.0deg, (17.69, 4.77) Load Comb. = +1.20D+0.50Lr+0.50L+W+1.60H, Alpha= 180.0deg, (17.69, 4.77)

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
2,975.0 2,975.0

2,677.5 2,677.5

2,380.0 2,380.0

2,082.5 2,082.5

1,785.0 1,785.0
Phi * Pn (k)

Phi * Pn (k)
1,487.5 1,487.5

1,190.0 1,190.0

892.5 892.5

595.0 595.0

297.5 297.5

0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6 0.0 600.8 1,201.51,802.32,403.13,003.83,604.64,205.34,806.15,406.96,007.6

Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (22.83, 306.73) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (13.27, 2.68)
Concrete Shear Wall Check ( P71)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 32 ⋅ ft h := 11 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 728 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 2 curtains of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 158.813 ⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 14" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 396 ⋅ kips Mu := 3057⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 210.327⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:28PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P71

Edge Cover = 2.0in #5

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Column Reinforcing : 4 - #5 bars @ corners,, 31.0 - #5 bars left & right
#5
#5
X #5
#5
X
#5
#5
#5
#5
#5
#5
between corner bars #5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Y

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 51,040.0 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 1,716.0, H = 25.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 10.926 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.081 : 1 Top along X-X 156.0 k Bottom along X-X 156.0 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 28.143 k * Pn = 363.184 k
Maximum SERVICE Load Deflections . . .
Mu-x = -1,738.50 k-ft * Mn-x = 21,776.2 k-ft
Along Y-Y -0.000114 in at 6.423 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 1,738.50 k-ft Mn at Angle = 21,352.1 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4440 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 16,825.2 k
Pnmin : Nominal Min. Tension Axial Capacity -1,227.60 k Reinforcing Area 20.460 in^2
Concrete Area 4,608.0 in^2
Pn, max : Usable Compressive Axial Capacity 8,749.12 k
Pn, min : Usable Tension Axial Capacity -797.94 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 10.93 71.46 8,749.12 1.000 -40.00 180.000 40.00 5,029.74 0.008
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:28PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P71

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.20D+1.60L+0.50S+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.20D+1.60Lr+0.50L+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.20D+1.60Lr+0.50W+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.20D+0.50L+1.60S+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.20D+1.60S+0.50W+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.20D+0.50Lr+0.50L+W+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.20D+0.50L+0.50S+W+1.60H Actual 10.93 61.25 8,749.12 1.000 -40.00 180.000 40.00 5,735.53 0.007
+1.549D+0.50L+0.20S+E+1.60H Actual 10.93 79.04 1,603.14 1.000 -1,756.00 180.000 1,756.00 35,971.97 0.049
+0.90D+W+0.90H Actual 10.93 45.94 8,749.12 1.000 -22.50 180.000 22.50 4,317.66 0.005
+0.5514D+E+0.90H Actual 10.93 28.14 363.18 1.000 -1,738.50 180.000 1,738.50 21,352.06 0.081
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 2.273 2.273 k k 51.040 k
+D+L+H 2.273 2.273 k k 51.040 k
+D+Lr+H 2.273 2.273 k k 51.040 k
+D+S+H 2.273 2.273 k k 51.040 k
+D+0.750Lr+0.750L+H 2.273 2.273 k k 51.040 k
+D+0.750L+0.750S+H 2.273 2.273 k k 51.040 k
+D+0.60W+H 2.273 2.273 k k 51.040 k
+D+0.70E+H 111.473 111.473 k k 51.040 k
+D+0.750Lr+0.750L+0.450W+H 2.273 2.273 k k 51.040 k
+D+0.750L+0.750S+0.450W+H 2.273 2.273 k k 51.040 k
+D+0.750L+0.750S+0.5250E+H 84.173 84.173 k k 51.040 k
+0.60D+0.60W+0.60H 1.364 1.364 k k 30.624 k
+0.60D+0.70E+0.60H 110.564 110.564 k k 30.624 k
D Only k k 51.040 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 156.000 156.000 k k k
H Only 2.273 2.273 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft 25.000 k-ft
+D+L+H k-ft 25.000 k-ft
+D+Lr+H k-ft 25.000 k-ft
+D+S+H k-ft 25.000 k-ft
+D+0.750Lr+0.750L+H k-ft 25.000 k-ft
+D+0.750L+0.750S+H k-ft 25.000 k-ft
+D+0.60W+H k-ft 25.000 k-ft
+D+0.70E+H k-ft 1,226.200 k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft 25.000 k-ft
+D+0.750L+0.750S+0.450W+H k-ft 25.000 k-ft
+D+0.750L+0.750S+0.5250E+H k-ft 925.900 k-ft
+0.60D+0.60W+0.60H k-ft 15.000 k-ft
+0.60D+0.70E+0.60H k-ft 1,216.200 k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft 1,716.000 k-ft
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:28PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P71

Maximum Moments Note: Only non-zero reactions are listed.

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Height = 11.0 ft

#5
#5 M-y Loads
Height = 11.0 ft
###.##kft
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
X #5
#X5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5 Looking along X-X Axis
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5

Y Looking along Y-Y Axis

Interaction Diagrams .
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:28PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P71

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
9,225.0 9,225.0

8,302.5 8,302.5

7,380.0 7,380.0

6,457.5 6,457.5

5,535.0 5,535.0

Phi * Pn (k)

Phi * Pn (k)
4,612.5 4,612.5

3,690.0 3,690.0

2,767.5 2,767.5

1,845.0 1,845.0

922.5 922.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
9,225.0 9,225.0

8,302.5 8,302.5

7,380.0 7,380.0

6,457.5 6,457.5

5,535.0 5,535.0
Phi * Pn (k)

Phi * Pn (k)
4,612.5 4,612.5

3,690.0 3,690.0

2,767.5 2,767.5

1,845.0 1,845.0

922.5 922.5

0.0 5,912.611,825.1
17,737.7
23,650.2
29,562.8
35,475.4
41,387.9
47,300.5
53,213.0
59,125.6 0.0 5,912.611,825.1
17,737.7
23,650.2
29,562.8
35,475.4
41,387.9
47,300.5
53,213.0
59,125.6
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (61.25, 40.00) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (61.25, 40.00)
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:28PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P71

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
9,225.0 9,225.0

8,302.5 8,302.5

7,380.0 7,380.0

6,457.5 6,457.5

5,535.0 5,535.0

Phi * Pn (k)

Phi * Pn (k)
4,612.5 4,612.5

3,690.0 3,690.0

2,767.5 2,767.5

1,845.0 1,845.0

922.5 922.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
9,225.0 9,225.0

8,302.5 8,302.5

7,380.0 7,380.0

6,457.5 6,457.5

5,535.0 5,535.0
Phi * Pn (k)

Phi * Pn (k)
4,612.5 4,612.5

3,690.0 3,690.0

2,767.5 2,767.5

1,845.0 1,845.0

922.5 922.5

0.0 5,912.611,825.1
17,737.7
23,650.2
29,562.8
35,475.4
41,387.9
47,300.5
53,213.0
59,125.6 0.0 5,912.611,825.1
17,737.7
23,650.2
29,562.8
35,475.4
41,387.9
47,300.5
53,213.0
59,125.6
Load Comb. = +1.549D+0.50L+0.20S+E+1.60H, Alpha= 180.0deg, (79.04, 1,756.00) Load Comb. = +0.90D+W+0.90H, Alpha= 180.0deg, (45.94, 22.50)
Concrete Shear Wall Check ( P73)
6
fc' := 4000⋅ psi Ec := 57000 ⋅ fc' ⋅ psi Ec = 3.605 × 10 ⋅ psi fy := 60000 ⋅ psi
twall := 12 ⋅ in lwall := 28 ⋅ ft h := 10 ⋅ ft ( height of entire wall or segment of wall considered )

ϕ := 0.6 ( 9.3.4 ) γconc := 145 ⋅ pcf cover := 2 ⋅ in Acv := twall⋅ ( lwall − cover)

Vu := 202 ⋅ kips

1) Check if two curtains of reinforcement are required

(
result := if Vu > 2 ⋅ Acv ⋅ fc' ⋅ psi , "Use 2 curtains of reinf." , "Use 1 curtain of reinf." ) ( 21.7.2.2 )

result = "Use 1 curtain of reinf."

Designed_Rebar_layer := 2 n := Designed_Rebar_layer

2) Determine reinforcement requirement for shear

2
As_horiz := 0.2 ⋅ in spacing := 12 ⋅ in < 18" O.K. ( 21.7.2.1 )

ϕVn1 := if 
 h
> 2 , ϕ⋅ 2⋅( ) (
fc' ⋅ psi + ρt ⋅ fy , ϕ ⋅ α ⋅ )
fc' ⋅ psi + ρt ⋅ fy  ϕVn1 = 213.842⋅ psi
 lwall 

ϕVn2 := ϕ ⋅ 8 ⋅ fc' ⋅ psi ( 21.7.4.4 ) ϕVn2 = 303.579⋅ psi

ϕVn := min ( ϕVn1 , ϕVn2)

Vu
= 50.399 ⋅ psi < ϕVn = 213.842 ⋅ psi O.K.
Acv

Therefore, use 14" Con'c w/ #4 @12" O.C Horiz. Rebar @ Each Face
Shear Wall Boundary Elements Detail Requirements

1) Chekc Boundary Zone Detail Requirements (21.7.6.3)

Pu := 534 ⋅ kips Mu := 3035⋅ kips ⋅ ft

3
twall⋅ lwall Pu Mu lwall
Ag := lwall ⋅ twall Ig := + ⋅ = 293.739⋅ psi 0.2 ⋅ fc' = 800 ⋅ psi
12 Ag Ig 2

 Pu Mu lwall 
Check1 := if  + ⋅ < 0.2 ⋅ fc' , "B.Z.s are not required" , "B.Z.s are required" 
 Ag Ig 2 

Check1 = "B.Z.s are not required"

Special Boundary Elements are not required

Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:24PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P73

.
Code References
Calculations per ACI 318-11, IBC 2012, CBC 2013, ASCE 7-10
Load Combinations Used : ASCE 7-10
General Information
f'c : Concrete 28 day strength = 4.0 ksi Overall Column Height = 10.0 ft
E= = 3,605.0 ksi End Fixity Top & Bottom Pinned
Density = 145.0 pcf Brace condition for deflection (buckling) along columns :
= 0.850 X-X (width) axis :
fy - Main Rebar = 60.0 ksi Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
E - Main Rebar = 29,000.0 ksi Y-Y (depth) axis :
Allow. Reinforcing Limits ASTM A615 Bars Used Unbraced Length for X-X Axis buckling = 10.0 ft, K = 1.0
Min. Reinf. = 0.250 %
Max. Reinf. = 8.0 %
Load Combination : ASCE 7-10
..
Column Cross Section
Column Dimensions :336.0in high x 12.0in Wide, Column Edge to Rebar Y

Edge Cover = 2.0in #5

Applied Loads .
Entered loads are factored per load combinations specified by user.
Column self weight included : 40,600.0 lbs * Dead Load Factor
BENDING LOADS . . .
Moment acting about X-X axis, E = 2,545.0, H = 228.0 k-ft
DESIGN SUMMARY .
Load Combination +0.5514D+E+0.90H Maximum SERVICE Load Reactions . .
Location of max.above base 9.933 ft Top along Y-Y 0.0 k Bottom along Y-Y 0.0 k
Maximum Stress Ratio = 0.190 : 1 Top along X-X 254.50 k Bottom along X-X 254.50 k
Ratio = (Pu^2+Mu^2)^.5 / (PhiPn^2+PhiMn^2)^.5
Pu = 22.387 k * Pn = 142.880 k
Maximum SERVICE Load Deflections . . .
Mu-x = -2,731.74 k-ft * Mn-x = 14,710.7 k-ft
Along Y-Y -0.000208 in at 5.839 ft above base
Mu-y = 0.0 k-ft * Mn-y = 0.0 k-ft for load combination : E Only
Mu Angle = 180.0 deg Along X-X 0.0in at 0.0 ft above base
Mu at Angle = 2,731.74 k-ft Mn at Angle = 14,375.1 k-ft for load combination :
Pn & Mn values located at Pu-Mu vector intersection with capacity curve
General Section Information . . . = 0.650 = 0.850 = 0.80
Column Capacities . . .
: % Reinforcing 0.4459 % Rebar % Ok
Pnmax : Nominal Max. Compressive Axial Capacity 14,726.5 k
Pnmin : Nominal Min. Tension Axial Capacity -1,078.80 k Reinforcing Area 17.980 in^2
Concrete Area 4,032.0 in^2
Pn, max : Usable Compressive Axial Capacity 7,657.76 k
Pn, min : Usable Tension Axial Capacity -701.22 k
Governing Load Combination Results .

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.40D+1.60H Actual 9.93 56.84 5,301.98 1.000 -362.35 180.000 362.35 33,655.92 0.011
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:24PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P73

Governing Load Combination Results

Governing Factored Moment Source Dist. from Axial Load k Bending Analysis k-ft Utilization
Load Combination X-X Y-Y base ft Pu * Pn x x * Mux y y * Muy Alpha (deg) Mu Mn Ratio
+1.20D+0.50Lr+1.60L+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.20D+1.60L+0.50S+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.20D+1.60Lr+0.50L+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.20D+1.60Lr+0.50W+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.20D+0.50L+1.60S+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.20D+1.60S+0.50W+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.20D+0.50Lr+0.50L+W+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.20D+0.50L+0.50S+W+1.60H Actual 9.93 48.72 4,683.05 1.000 -362.35 180.000 362.35 34,750.32 0.010
+1.549D+0.50L+0.20S+E+1.60H Actual 9.93 62.87 371.57 1.000 -2,890.27 180.000 2,890.27 17,014.93 0.170
+0.90D+W+0.90H Actual 9.93 36.54 5,796.91 1.000 -203.82 180.000 203.82 32,151.88 0.006
+0.5514D+E+0.90H Actual 9.93 22.39 142.88 1.000 -2,731.74 180.000 2,731.74 14,375.07 0.190
Maximum Reactions Note: Only non-zero reactions are listed. .
Reaction along X-X Axis Reaction along Y-Y Axis Axial Reaction
Load Combination @ Base @ Top @ Base @ Top @ Base
+D+H 22.800 22.800 k k 40.600 k
+D+L+H 22.800 22.800 k k 40.600 k
+D+Lr+H 22.800 22.800 k k 40.600 k
+D+S+H 22.800 22.800 k k 40.600 k
+D+0.750Lr+0.750L+H 22.800 22.800 k k 40.600 k
+D+0.750L+0.750S+H 22.800 22.800 k k 40.600 k
+D+0.60W+H 22.800 22.800 k k 40.600 k
+D+0.70E+H 200.950 200.950 k k 40.600 k
+D+0.750Lr+0.750L+0.450W+H 22.800 22.800 k k 40.600 k
+D+0.750L+0.750S+0.450W+H 22.800 22.800 k k 40.600 k
+D+0.750L+0.750S+0.5250E+H 156.413 156.413 k k 40.600 k
+0.60D+0.60W+0.60H 13.680 13.680 k k 24.360 k
+0.60D+0.70E+0.60H 191.830 191.830 k k 24.360 k
D Only k k 40.600 k
Lr Only k k k
L Only k k k
S Only k k k
W Only k k k
E Only 254.500 254.500 k k k
H Only 22.800 22.800 k k k
Maximum Moments Note: Only non-zero reactions are listed.
Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
+D+H k-ft k-ft
+D+L+H k-ft k-ft
+D+Lr+H k-ft k-ft
+D+S+H k-ft k-ft
+D+0.750Lr+0.750L+H k-ft k-ft
+D+0.750L+0.750S+H k-ft k-ft
+D+0.60W+H k-ft k-ft
+D+0.70E+H k-ft k-ft
+D+0.750Lr+0.750L+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.450W+H k-ft k-ft
+D+0.750L+0.750S+0.5250E+H k-ft k-ft
+0.60D+0.60W+0.60H k-ft k-ft
+0.60D+0.70E+0.60H k-ft k-ft
D Only k-ft k-ft
Lr Only k-ft k-ft
L Only k-ft k-ft
S Only k-ft k-ft
W Only k-ft k-ft
E Only k-ft k-ft
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:24PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P73

Maximum Moments Note: Only non-zero reactions are listed.

Moment About X-X Axis Moment About Y-Y Axis
Load Combination @ Base @ Top @ Base @ Top
H Only k-ft k-ft
Maximum Deflections for Load Combinations .
Load Combination Max. X-X Deflection Distance Max. Y-Y Deflection Distance
+D+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+L+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+Lr+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+S+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.750Lr+0.750L+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.750L+0.750S+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.60W+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.70E+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.750Lr+0.750L+0.450W+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.750L+0.750S+0.450W+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+D+0.750L+0.750S+0.5250E+H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+0.60D+0.60W+0.60H 0.0000 in 0.000 ft -0.000 in 5.839 ft
+0.60D+0.70E+0.60H 0.0000 in 0.000 ft -0.000 in 5.839 ft
D Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
Lr Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
L Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
S Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
W Only 0.0000 in 0.000 ft 0.000 in 0.000 ft
E Only 0.0000 in 0.000 ft -0.000 in 5.839 ft
H Only 0.0000 in 0.000 ft -0.000 in 5.839 ft
Sketches .
Y

#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
Height = 10.0 ft

#5
#5 M-y Loads ###.##kft

#5
#5 Height = 10.0 ft
#5
#5
#5
#5
#5
#5
X #5
#X5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5 Looking along X-X Axis
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5
#5

Y Looking along Y-Y Axis

Interaction Diagrams .
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:24PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P73

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,075.0 8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0

Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,075.0 8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0
Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

0.0 4,529.39,058.513,587.8
18,117.0
22,646.3
27,175.5
31,704.8
36,234.0
40,763.3
45,292.5 0.0 4,529.39,058.513,587.8
18,117.0
22,646.3
27,175.5
31,704.8
36,234.0
40,763.3
45,292.5
Load Comb. = +1.20D+1.60Lr+0.50L+1.60H, Alpha= 180.0deg, (48.72, 362.35) Load Comb. = +1.20D+1.60Lr+0.50W+1.60H, Alpha= 180.0deg, (48.72, 362.35)
Title Block Line 1 Project Title:
You can change this area Engineer: Project ID:
using the "Settings" menu item Project Descr:
and then using the "Printing &
Title Block" selection.
Title Block Line 6 Printed: 8 FEB 2016, 9:24PM
File = X:\KNA\15120-10 Virgil Melose\Calculation\concrete shear wall.ec6
Concrete Column ENERCALC, INC. 1983-2015, Build:6.15.7.30, Ver:6.14.12.31
Lic. # : KW-06010316 Licensee : Kim and Associates, Structural Engineers
Description : P73

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,075.0 8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0

Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

Concrete Column P-M Interaction Diagram Concrete Column P-M Interaction Diagram
Phi * Mn @ Alpha (k-ft) Phi * Mn @ Alpha (k-ft)
8,075.0 8,075.0

7,267.5 7,267.5

6,460.0 6,460.0

5,652.5 5,652.5

4,845.0 4,845.0
Phi * Pn (k)

Phi * Pn (k)
4,037.5 4,037.5

3,230.0 3,230.0

2,422.5 2,422.5

1,615.0 1,615.0

807.5 807.5

Basic and Advanced Laboratory Techniques in Histopathology and Cytology
100% (12)
Basic and Advanced Laboratory Techniques in Histopathology and Cytology
275 pages
Latest Software Collection TERABYTE Package Links
No ratings yet
Latest Software Collection TERABYTE Package Links
32 pages
Site Selection Criteria
0% (2)
Site Selection Criteria
3 pages
2018 NDS
No ratings yet
2018 NDS
61 pages
ACI340 - 1R - 91 Handbook 1
100% (2)
ACI340 - 1R - 91 Handbook 1
381 pages
ConcreteDesign PDF
No ratings yet
ConcreteDesign PDF
64 pages
04 0862 02 MS 6RP AFP tcm143-686151
68% (19)
04 0862 02 MS 6RP AFP tcm143-686151
12 pages
RC Short Column Capacity Calculation ACI318
100% (1)
RC Short Column Capacity Calculation ACI318
6 pages
COT-MATH - Identifying Parallel, Inter-Secting and Perpendicular Lines
70% (10)
COT-MATH - Identifying Parallel, Inter-Secting and Perpendicular Lines
3 pages
Gusset
No ratings yet
Gusset
15 pages
ASCE 7-16 Errata - July9 - 2018
No ratings yet
ASCE 7-16 Errata - July9 - 2018
8 pages
Proposed Changes in Shear Provisions For Reinforced and Prestressed Concrete Beams
No ratings yet
Proposed Changes in Shear Provisions For Reinforced and Prestressed Concrete Beams
13 pages
Wood Beam Analysis & Design (NDS)
No ratings yet
Wood Beam Analysis & Design (NDS)
4 pages
Viga de Concreto ACI 318-11
No ratings yet
Viga de Concreto ACI 318-11
144 pages
Robertson Q Deck Page 1 of 4
No ratings yet
Robertson Q Deck Page 1 of 4
6 pages
Misosa - Animals With Backbones - The Vertebrates
100% (2)
Misosa - Animals With Backbones - The Vertebrates
12 pages
Tinius Olse
100% (1)
Tinius Olse
20 pages
APA Plywood Design1
No ratings yet
APA Plywood Design1
5 pages
Challenges That Face Entrepreneurships in Tanzania
No ratings yet
Challenges That Face Entrepreneurships in Tanzania
6 pages
Column Web Shear Plate 14thEdAISC
No ratings yet
Column Web Shear Plate 14thEdAISC
47 pages
Skyciv Foundation Design: Input
No ratings yet
Skyciv Foundation Design: Input
19 pages
PM 02 03 Management Review
No ratings yet
PM 02 03 Management Review
4 pages
Beam With Torsion
No ratings yet
Beam With Torsion
22 pages
Wood Pole or Pile Design Based On NDS 2018: Input Data & Design Summary
No ratings yet
Wood Pole or Pile Design Based On NDS 2018: Input Data & Design Summary
1 page
Arce306 Matrix STR Analy - +++
No ratings yet
Arce306 Matrix STR Analy - +++
66 pages
Muro de Contencion en Mathcad
No ratings yet
Muro de Contencion en Mathcad
22 pages
2000 Simple Procedure For Seismic Analysis of Liquid-Storage Tanks
No ratings yet
2000 Simple Procedure For Seismic Analysis of Liquid-Storage Tanks
5 pages
Beam Penetration
No ratings yet
Beam Penetration
1 page
07-Mathcad Wall Spread Soil
No ratings yet
07-Mathcad Wall Spread Soil
17 pages
Reference Manual AND Spreadsheet Users Guide
No ratings yet
Reference Manual AND Spreadsheet Users Guide
28 pages
11-Plate Bending Element
No ratings yet
11-Plate Bending Element
26 pages
Original Pile Cap and Pile Design
No ratings yet
Original Pile Cap and Pile Design
61 pages
SJI Bridging Webinar For-Participants 021516
No ratings yet
SJI Bridging Webinar For-Participants 021516
131 pages
SDS - Oks 2101 - en
No ratings yet
SDS - Oks 2101 - en
16 pages
AISC Properties Viewer
No ratings yet
AISC Properties Viewer
1 page
Standard Specification For Cast-in-Place Nonreinforced Concrete Pipe (ACI 346-90) (Reapproved 1997)
No ratings yet
Standard Specification For Cast-in-Place Nonreinforced Concrete Pipe (ACI 346-90) (Reapproved 1997)
7 pages
Seismic Analysis: Category
No ratings yet
Seismic Analysis: Category
7 pages
54.01 101490900101 101490900144 Operator's Platform
No ratings yet
54.01 101490900101 101490900144 Operator's Platform
6 pages
Development Length - ACI 14
No ratings yet
Development Length - ACI 14
15 pages
Flush Wall Pilaster Design Based On TMS 402-16/13: Input Data & Design Summary
No ratings yet
Flush Wall Pilaster Design Based On TMS 402-16/13: Input Data & Design Summary
7 pages
Ibc 2003
No ratings yet
Ibc 2003
10 pages
Abap Oops
No ratings yet
Abap Oops
117 pages
Basement Column Supporting Lateral Resisting Frame Spreadsheet Calculation
No ratings yet
Basement Column Supporting Lateral Resisting Frame Spreadsheet Calculation
3 pages
PCA TIME SAVING DESIGN AIDS - Columns
No ratings yet
PCA TIME SAVING DESIGN AIDS - Columns
9 pages
TURKISH CODE - ts500 - English PDF
No ratings yet
TURKISH CODE - ts500 - English PDF
31 pages
PCA TIME SAVING DESIGN AIDS - Walls
No ratings yet
PCA TIME SAVING DESIGN AIDS - Walls
5 pages
Unistrut Calc
No ratings yet
Unistrut Calc
12 pages
Beam Ledge 7-4-2015
No ratings yet
Beam Ledge 7-4-2015
3 pages
RW
No ratings yet
RW
103 pages
PED Pass Pinned Connection Design Arm01&CL02: Project: Design Code: ASD Subj: Unit Position
No ratings yet
PED Pass Pinned Connection Design Arm01&CL02: Project: Design Code: ASD Subj: Unit Position
1 page
Design Guide 1 Revisions Errata List
No ratings yet
Design Guide 1 Revisions Errata List
3 pages
Aci 346R-90
No ratings yet
Aci 346R-90
15 pages
Breeder House Foundation
No ratings yet
Breeder House Foundation
16 pages
TN 192 Punching Shear Calculation in Builder
100% (1)
TN 192 Punching Shear Calculation in Builder
24 pages
318-19 Errata Consolidated
No ratings yet
318-19 Errata Consolidated
7 pages
Concrete Beam Design Based On ACI 318-99
No ratings yet
Concrete Beam Design Based On ACI 318-99
3 pages
CRSI Manual To Design RC Diaphragms - Part21
100% (1)
CRSI Manual To Design RC Diaphragms - Part21
4 pages
Tek 12-02B
No ratings yet
Tek 12-02B
4 pages
Cantilever Retaining Wall Structural Design
No ratings yet
Cantilever Retaining Wall Structural Design
7 pages
Frame - Portal and Gable Rigid Plane Frame Analysis
No ratings yet
Frame - Portal and Gable Rigid Plane Frame Analysis
6 pages
EM 1110-2-2705 - Structural Design of Closure Structures For Local Flood Protection Projects 1
No ratings yet
EM 1110-2-2705 - Structural Design of Closure Structures For Local Flood Protection Projects 1
110 pages
Pile Caps
No ratings yet
Pile Caps
9 pages
Input Data & Design Summary: Project: Client: Design By: Job No.: Date: Review by
No ratings yet
Input Data & Design Summary: Project: Client: Design By: Job No.: Date: Review by
3 pages
Seismic Behavior of Short Coupling Beams With Different Reinforcement Layouts
No ratings yet
Seismic Behavior of Short Coupling Beams With Different Reinforcement Layouts
10 pages
Design Examples
No ratings yet
Design Examples
6 pages
Check The RC Stair Design (G-8)
No ratings yet
Check The RC Stair Design (G-8)
6 pages
Thermodynamics I
No ratings yet
Thermodynamics I
34 pages
Input Data & Design Summary: Project: Client: Design By: Job No.: Date: Review by
100% (2)
Input Data & Design Summary: Project: Client: Design By: Job No.: Date: Review by
3 pages
UNIT 3 - Test 2
No ratings yet
UNIT 3 - Test 2
7 pages
Dexos2™ Brands - GM Dexoscontact Dexos® Licensing Program
No ratings yet
Dexos2™ Brands - GM Dexoscontact Dexos® Licensing Program
9 pages
Manual Spot Welder
No ratings yet
Manual Spot Welder
9 pages
RCD-DeSIGN Engr. Mark Christian
No ratings yet
RCD-DeSIGN Engr. Mark Christian
9 pages
Fin460 Group 3 Sec 3
No ratings yet
Fin460 Group 3 Sec 3
22 pages
Design Examples: Example 1: Design of Reinforced Concrete Non-Load Bearing Shear Wall
No ratings yet
Design Examples: Example 1: Design of Reinforced Concrete Non-Load Bearing Shear Wall
8 pages
New Plan House Epsom Project Job No. Calcs For Start Page No./revision Calcs by Calcs Date Checked by Checked Date Approved by Approved Date
No ratings yet
New Plan House Epsom Project Job No. Calcs For Start Page No./revision Calcs by Calcs Date Checked by Checked Date Approved by Approved Date
4 pages
Reliability Study of An LNG Plant
No ratings yet
Reliability Study of An LNG Plant
16 pages
RC Beam Analysis & Design (En1992-1) : TEDDS Calculation Version 2.0.03
No ratings yet
RC Beam Analysis & Design (En1992-1) : TEDDS Calculation Version 2.0.03
5 pages
MSG 3 Final Report
No ratings yet
MSG 3 Final Report
60 pages
Tifac Core at Nit Hamirpur
No ratings yet
Tifac Core at Nit Hamirpur
6 pages
Fitch 1963
No ratings yet
Fitch 1963
9 pages
The Kaldnes Moving Bed Process For Wastewater Treatment at Pulp and Paper Mills
No ratings yet
The Kaldnes Moving Bed Process For Wastewater Treatment at Pulp and Paper Mills
3 pages
Energy Fiji Limited: Application Form To Sit Wireman'S Licence Examination
100% (1)
Energy Fiji Limited: Application Form To Sit Wireman'S Licence Examination
2 pages
Icd 16 5 Eng V2.1 PDF
No ratings yet
Icd 16 5 Eng V2.1 PDF
2 pages
Test of Oral Year 12
No ratings yet
Test of Oral Year 12
7 pages
Chapter 1 Acct 2121
No ratings yet
Chapter 1 Acct 2121
39 pages
Dynamic Hysys
No ratings yet
Dynamic Hysys
1 page
FSM 4 Basic Baking Report
No ratings yet
FSM 4 Basic Baking Report
12 pages
SAMSAQ
No ratings yet
SAMSAQ
12 pages
Aramid Prepreg Market
No ratings yet
Aramid Prepreg Market
8 pages