1784-1

VW@

Ily actuated elevator PS 21 t _ UIICpower slip system

IS Flush mounted spider RST Rotary support table

1784-2

EQUIPMENT
MANUFACTURED
BY
VARCO
BJ:
POWER
TOOLS
500T Elevator/Spider Torquewrenches Hydraulic
Spinningwrenches Air & Hydraulic
Kellyspinners Air & Hydraulic
Catheads Hydraulic& Mechanical
Powerslips PS15,16,2l, 25 & 30
Casingtongs Hydraulic
Powerunits Hydraulic

MPCH Master bushing HOISTING

TOOLS
Dynaplex hook
Hooks Dynaplex& Unimatic
Elevatorlinks 100to 1000 Tons
Elevators Manual,Air,Hydraulic
See elevator selection chart
Elevator/spiders Manual& Air

HDP Kelly bushing ROTARY

TOOLS
Casingbushings Safetyclamps
Casingspiders Kellyspinners
Handslips Masterbushings
Manualtongs

Weldless
Manual tong link
1784-4

ELEVATOR
SELECTION
CHART
Size Type Framenr. Cap. Weight Size Type Frame nr.Cap. Weight
Inches mm Tons Lb-ozkg Inches mm Tons Lb-ozkg
SLIP TYPE ELEVATORS YSERIE COLLAR TYPESIDEDOOR ELEVATORS DSERIE
l.OKbP/IS 27-52 LYT 2X750* 20 57 26 4'12.7 114.178 MOO 17597 250 506 230
1.315-27/8 33-73 MYT 29328 40 148 67
COLLAR TYPESIDEDOOR ELEVATORSXSERIE
1.315-31/z 33.89 YT 55600 75 355 161
1.660.2'18 42-73 SLX 33734 65 50 23
23/8-3'/2 60.89 HYT 39284 150 750 336
2'/8-2'/8 60.73 SLX 33633 1W 75 34
3'12.7 89.178 YC 24140 75 445 206
31/z-4 89.102 SLX 33809 100 105 48
31/z-7 89.178 MYC 200360 125 750 336
41/z-5’/2 110-140 SLX 33854 100 175 79
27/8-75/s 89.194 HYC BJ55310 200 997 452
51/z-85/8 140.219 SLX 31239 150 325 147 t
27/8-75/8 89 HYC A0 BJ70166 200 1465 665
g5/8-lo3/4 245-273 SLX 33950 150 420 191
COLLAR TYPECENTER LATCH ELEVATORSSERIE 113/4-l33/8298.340 SLX 33982 150 500 227
1.050.2'12 27.73 TA 32387 35 39 18 16 406 SLX 34087 150 575 261
1.660-27/s 42-73 TA 32385 65 65 29 185/a-20 473.508 SLX 33632 150 700 318
31/z-4'/2 89.114 TA 32386 65 83 38 24-30 660.762 SLX DO 52755 150 1320 600
23/8-27/8 60.73 TA 32383 1w 100 45 22-241/z 622 SLX 34175 250 1000 454
31/z-5 89.127 TA 32384 100 158 72 185/s-20 473.508 SX 30598 250 1100 499
43/b-85/8 121.219 TA 200000 1M) 410 186 g5/8.1?/8 244.340 SX 29965 350 1200 544
4+85/s 114.219 TA 32754 150 430 195 g5/8-1s3/8 244.340 SX 29964 500 1100 439
43/t-85/8 121-219 TA A0 35636 150 530 240 16 406 SX 30729 500 1200 544
81/z-W/4 216.286 TA 39342 150 430 195 65/8-75/s 168.194 SSD 71273 250 6W 273
81/z-ll’/r 216-286 TA A0 39343 150 550 250 65/8-75/s 168.194 SSO HO 201440 250 1000 455
23/8-41/2 60.114 RGA 201360 200 470 213 85/S-103/4 219-273 SSD 71274 250 620 282
31/z-7 102.178 GA 200034 350 555 252 85/8-103/4 219.273 SSD HO 201441 250 1020 464
31/z-7 102.178 GA A0 200035 350 725 330 113/s-14 298.356 SSO 71275 250 635 289
7-75/8 178.194 GGA 201385 350 695 316 113/r-14 298-356 SSO HO 201443 250 1035 470
7-75/8 178.194 GGAA0 201380 350 998 454
AUXILIARY ELEVATORS S SERIE
18OCENTER LATCH ELEVATOR GSERIE 23/8-3'/2 60-89 SJL 70499 45 20
23/8-5 60.127 MG 30157 100 200 91 4-51/z 102.140 SJL 705w 51 23
23/8-3'/2 60.89 RGG 200680 150 480 218 6-75/s 152-194 SJL 70501 72 33
31/z-5+ 89-140 MGG 35005 250 575 261 85/8-1O3/4219-273 SJL 70502 98 44
31/z-51/z 89.140 MGGA0 36056 250 720 327 113/4-133/s298.340 SJL 70503 5 121 55
4.5'/2 102.140 GG 31068 350 715 324 14 356 SJC 72782.10 5 140 61
4-51/z 102.140 GGA0 35143 350 1018 463 16.20 406.508 SJL 70504 5 210 95
4-65/s 102.168 HGG 70013 5w 1000 454 21-241/z 533.622 SJL 70505 5 270 123
4-65/s 102.168 HGGA0 70222 500 1500 680 27/8-51/z 72.140 SPL 5O 200008 5 77 35
5'/2-75/8 140.1% SPL 5" 200010 5 108 49
18'CENTER LATCH ELEVATOR GSERIE
85/8-95/8 219-244 SPL 5' 200012 5 145 66
with wear bushing
9’/8 251 SPL 5" 200029 5 145 66
31/2-51/z 89.140 MGG 200058 250 585 266
103/r 273 SPL 5" 200013 5 160 73
31/z-5'/2 89.140 MGGA0 200057 250 730 332
23/8-41/2 60.114 SPL 12' 2OW14 5 86 39
4-51/z 102.140 GG 200056 350 725 329
31/z-5 89-127 SPL 18' 200009 5 79 36
4.5'/2 102.140 GGA0 200024 350 1028 468
51/z-65/8 140-168 SPL 18O 200011 5 94 43
4*/z-5'/> 114.140 HGG 200060 500 1010 459
65/s 168 HGG 200062 500 1010 459 S SERIES LIFTING SLING
41/z-51/2 114.140 HGGA0 200059 500 1510 685 23/8-24'/2 34568-5
65/s 168 HGGA0 200061 500 1510 685
HYDRAULIC ELEVATORS FOR ALLTIJBULARS
BOTTLENECKCENTER LATCH ELEVATOR ?/8.g5/860-244 BX 1 HO 201550 350 2080 951
4-5*/z 102.140 BNC 88425-50-1350 880 400 91/z-14 241.356 8X 2 HO 201600 500 2910 1320
18"SlDE DOOR CENTER LATCH ELEVATOR
A0 = Air operated
23/8-3'/2 60-89 SLB 36950* 150 450 204
HO = Hydraulic operated
31/z-4'/2 89-114 SLB 36997* 250 680 308
OD = Double Door elevator
41/z-5 114.127 SLBB 30931* 350 718 326
4-5*/z 102.140 SLBB 32227* 430 1342 609
MANUAL
TONG
SELECTION
CHART
Description Part no. Range Toroue

inches ft-f bs
HT2OG 5005OG 8.16 2oQxtG
HT164l 2005W 71/z-12 16OWO
HT l&l 200071 4-17 1QmO0
HT 65 200540 31/z-17 65000
HT 55 200560 3'/2.13s/S 55000
HT 35 200620 23/8-1@/4 35000
HT 14 200640 23/8-7 14000

MASTER
BUSHING
SELECTION
CHART
Make Size MPCH MSPC MSP/MDSP MSS
Comp Body Comp Body Comp Body Comp Body
only only only only
Continental JAS,JCS,JS
Emsco JAB-201/z,JABS,JB, JBS - . . 70540.6 70539-6 lW2-5 1007.5
D-25'/& DA 1803.4 1807-4 . .
T-2750 1804.1 1808-l 5429-l - 1005-l 1010-l
G-271/2 1804.5 1808.5 5429.5 1005.5 1010.5
H-27'/? 1804.2 1808-2 5429-2 1005.2 1010.2
K-271/z,KS, PI 1804.3 1808.3 5429-3 - 1005.3 1010.3
T-3750 (S/N l-48) 6600.2A 6601.2A . .
T-3750/T-4950(49iUP) 6600.2 6601.2 . .
Gardner-Denver RT.271;~ _ 1804-l 1808-l 5429-l 1005-I 1010-l
RT-371/z 6600.7 6601.7 . . .
ldeco 27'12 1804.7 1808-7 5429-7 - 1005-7 1010-7
37'12 6600.4 6601.4 . . .
National MS-7*/z,A&B-271/2 - 1804.5 1808.5 5429-5 1005.5 1010.5
C-365 6600.5 6601.5 . . . .
c-375 6600-l 6601-l . . . . .
Oilwell 27r/z,27'/zA 1804.9 1808-9 . . 1005-8 1010.8
A-27+ 1804.1 1808-l 5429-l 1005.1 1010-l
A-371/2 6600-3 6601.3 . . .
Wirth 271/z 1804-l 1808-l 5429-l - 1005-l 1010-l
371/z 6600.3 664X-3 . . . .

MPCH Master bushing

1784-6

FMS
375FLUSH
MOUNTED
CASING
SLIP
FLUSH
MOUNTED
FOR
SAFEIV IMPROVES
EFFICIENCY
OFCASING
OPERAIONS
l Installs into the rotary table so that it is level - Efficiencyimprovementshave been 25% or better.
with the rig floor.
l Lowers the casing connection height by 3 feet,
enabling the casing tong to be operated from the
rig floor.
l Eliminates the need for work platforms
or scaffolding for stabbing the casing or running
the casing tong.

POWER
DOWN
SLIPS
l Hydraulically operated slips are powered down to
provide back-up torque up to 35,000 ft/lbs.
l Eliminates the need for casing tong back-up.

FMS375SPEClFlCATlONS
Load rating 500 Tons
Pipe size 41/z” to 14” casing
FMS 375 Flush mounted
casing slip
SYSTEM
Rotary table size 371/z”
Rotary table config. National as standard, others with adaptor plates
Height 351/z” Check clearance below
Slips & guides Varco 500 Ton S/L slips & gt
Back-up torque, max. 35,000 ft Ibs

RST
ROTARY
SUPPORT
TABLE
SMALLER,
LIGHTER
ANDMORECOST
EFFECTlVE
FOR
TOPDRIVE
EQUIPPED
RIGS
l Uses hydraulic motors directly geared to the
rotary drive gear.
l Eliminates the transmission and the drive train.
l Standard manual or optional hydraulic operated
lock permits the table to be locked at any position.
l Reducesthe rotary skid size. SPEClFlCATlONS
l Lower maintenance costs. RST 495 RST 605
l Choose 2, 3 or 4 motors to match your speed Table size 491/z” 601/z”
and torque requirements. Load rating static 1000 Tons 1000 Tons
l Hydraulic dynamic slip ring allows operation of Torque max.ft-lbs 47000 50000
PS 21/30 power slip at all times without manually (@ 3000 Psi)
breaking/making hydraulic connections. Speed max. Rpm 29 27
l Central lubrication system allows easy greasing of (90,135,180 Gpm)
all moving parts. Gear ratio 1 : 6.95 1 : 7.3
l Maximum back-up torque on locks is 12OCCG ft-tbs. DimensionsLxWxH 101”~ 84”~ 301/z” 109”~ 95”x 301/z”
l Adapter rings to reduce down to 371/z” and 491/z”. Weight, approx.Ibs 20000 25000
Optional hinged adapter rings to reduce 491/z” *Optional 2, 3 or 4 motors each capable of
down to 371/z” 45 Gpm @ 3000 Psi.
 1704-7

Y!%wvmBJ,
BXHYDRAULICALLY
ACTUATED
EWATOR
l Purpose designed for actuated operation
l Cost competitivewith normal rig complementof
air-op, drill pipe, drill collar, casing and tubing
elevators.
l The most economical way to fully actuate all
the elevator functions.
l Double door design for optimal balance and
performance.
l The hydraulic cylinders are located inside the body
casting for clean lines and maximum protection,
and yet they are accessible for normal maintenance.
l Changeable bushings allow one elevator frame to
handle all pipe size and type requirements.
l Bushings are locked into place with spring loaded
pins for quick, easy removal and installation. Frame 1 Frame 2* Frame 3 Frame 4**
l Bushings can be changed within 5 minutes. Load rating350 Tons 500 Tons 150 Tons 150 Tons
l No special tools are needed, no loose nuts, bolts Drill Collar Drill Collar
or pins. 250 Tons 350 Tons
l Hinge journals are bushed to put major wear into Csg >14” Casing
replaceable components. 350 Tons XXI Tons
l One door bushing is spring loaded with linkage CsgI 14” Drill Pipe
connecting it to a locking pin. Any load on this Pipe size range
bushing segment engagesthe pin preventing the Drill pipe 27/811-65/a”N/A N/A 31/z’-6518”
elevator from opening. This safety lock prevents Drill collars 43/‘-91/z” 91/z”-111/t 93/4”.11’/4” 43/r-93/4”
the elevator from opening under load. Tubing 23/a’@-411211
N/A N/A N/A
l The elevator can be provided with an interlock Casing 41/2”-95/8” 95/8”.14” 95/f-20” 4112”-95/8”
system as an option when used with a power Power requirements
slip for tripping. Pressure 2000 Psi 2000 Psi 2000 PSI 2000 PSI
l A trigger mechanisminitiates the closing sequence Flow rate 5 GPM 5 GPM 5 GPM 5GPM
when pipe is thrown into the elevator. Hydr.lines 3 @ 318” 3 @ 3/8” 3 @ l/Z” 3 @ l/Z”
* 500 Ton for handling risers and stacks with special
square shoulder adapter.
**750 Ton for handling risers and stacks with special
square shoulder adapter.

DP bushing with wear guide Zip groove DC bushing CSGand TBG bushing
1784-8

PS2l/30RYURAULIC
POWERSLIP
SYSTEM
INSTALLS FLUSHWITH THE DRILL FLOOR
l Improves both safety and rig efficiency as proven
with the FMS Flush Mounted Casing Slip.
l Eliminates work platforms for stabbing and operating
power tongs during casing running operations.
POWERDOWNSLIPS
l React up to 45,000 ft/lbs of torque, on 14” casing.
l Eliminatethe need for back-ups for power casingtongs.
INSERTCARRIERSMAKE THIS A UNIVERSAL
TOOL, NOT JUST ANOTHERPOWERSLIP
Allows the PS 21 to handle all pipe types and sizes,
l

including BHA’s, collars, drill pipe, casing and tubing SYSTEM

from 23/8" to 14” and PS 30 from 231811 to 20”
- Quick changeover from BHA’s to collars to drill PS21130
SPEClFlCATlONS
pipe allows the PS 21/30 to trip the entire string.
l No need to use hand slips for drill collars or SPECIFICATIONS PS 21 PS 30
BHA’s as with traditional power slips. For rotary size V/z” 491/Y
- Insert carriers can be changed with pipe in the hole.
Pipe size range 23/8" t0 14" z3/8' t0 20"
l Carrier change can be done in 5 minutes or less.
Load rating 500tons 750Tons
Hydraulic requirements
l Special “drop and lock, “pull and release” design
eliminates loose pieces such as bolts and pins.
Pressure 2500Psi 2500Psi
Flow rate 10 GPM 10GPM
LIKE THE INSERTCARRIERS,THE SLIPS ALSO
HAVEA RAPID CHANGESYSTEM
l Two handles on the middle slip segment retract
and lock the spring-loaded slip retaining pin.
l No loose parts or special tools.
SLIP SET-BACKDESIGNEDTO PASSTOOL Nijverheidsweg 45 tu,$t Lok Yang Road
JOINTS, BHA’SAND CASINGCENTRALIZERS. 4879 AP Etten-Leur
P.O.Box 17 Singapore 2262
l The slip set back allows tool joints and drill pipe 4870 AA Etten-Leur Telephone: 65-265 5066
protectors to pass without dragging on the inserts, The Netherlands Telefax: 65-264 0578
even when drilling with 678” drill pipe. Telephone: (076) 5083ooO Telex: 21038
Telefax: (076) 5016948
l The PS 21/30 will pass: - BHA’s when tripping. Telex: 54477 Hamid Bin Humaila
- Centralisers when running casing. Al Mazroui Building
12950West Little York Road Zayed 2nd. Street, Abu Dhabi
CENTERINGDEVICE Houston, Texas 77041 P.O. Box 27011,Abu Dhabi
P.O. Box 800457 United Arab Emirates
l To enhance the performance of the PS 21/30 pu;p,, Texas 77280.0457 Telefax: 971-2-540012
Telephone: 971-2-552668
on floating rigs, the PS 21/30 can be ordered
Telephone: (713) 937-5500
with a centering device incorporated in the top cover. Telefax: (713) 937-5050 1st. Tverskaya-Yamskaya 23
l This centering device centers the pipe in Telex: 792819 Suite 12, 8th Floor
the well before the slips are set. 125047Moscow
Forties Road,Montrose
Angus DO109ET Russia
CONTROLPANEL Scotland Domestictel.: (7095)2527972
Telephone: (01674) 677222 Domesticfax: (7095)2527973
l A control panel, which can be located in the drillers
Telefax: (01674) 677379 Internationaltel.: (7501)2527972
console,operatesthe PS 21/30for remoteactuationof slips. Telex: 76580 Internationalfax: (7501)2527973
 INFORMATION REQUEST VIA COMPOSITE CATALOG®
For additional product/service information from this company; complete this form, print and
fax to the contact listed below.

To: From:

Attn: Sales Department

COMPANY
Varco BJ Oil Tools B.V.
NAME
The Netherlands
TITLE
Fax: (076) 5016948
STREET

CITY

STATE

ZIP

COUNTRY

PHONE

FAX

E-MAIL

Click on Box to Check

Please send ❑ Information and/or ❑ Quotation on the following:

This 43rd(1998-99) Edition of COMPOSITE CATALOG ® is published by World Oil ® • A Gulf Publishing Company Publication • P. O. Box 2608, Houston TX, 77252-2608, U.S.A.