GIW Hard Rock Mining Pumps

Mill Circuit Solutions

2 GIW Hard Rock Pumps

Rock Solid Choose GIW and spend more

Service time running your business.
Maximum productivity generates greater • Installation and startup • On and off-site repair services
profits. GIW’s experience, know-how and support • Timely equipment inspections,
hydraulic transport systems increase both. • Onsite technical support reports and repairs
GIW systems are designed to match your
• Requirements check list • Predictive maintenance and
maintenance cycle. Let GIW’s solutions
for all units repair services
improve your business and reduce
unplanned outages. • REGEN Service Centers renew • System analysis and process
your rotating equipment back optimization
We’re here to meet your specific needs, to OEM standards
wherever and whenever you need us.

GIW MDX
Design Features:
Optimal Wear Life with “Slurry Diverter”

Lower Specific Speed Design: A large diameter impeller

results in slower pump operation leading to extended
parts wear life. In addition, the lower specific speed
allows the pump to meet the variable flow conditions
confronted in modern mill circuits.

Longer Wearing Materials: Thicker cross sections and

advanced materials translate into long, predictable
pump service life.

Deep Base Circle: Minimizes aggressive particle

impingement and promotes “sliding” wear action.
Typical abrasive wear drops dramatically.
Slurry Diverter: GIW’s latest technology dramatically
Oversize Shrouds: Enhances clearing vane performance – increases suction liner life by reducing particle
minimizing recirculation and wear between the impeller recirculation and slurry concentration between the
and suction liner. impeller and liner.

Patented Inlet 5V Impeller: Designed to handle both Adjustable Suction Liner: Extended suction liner wear life
liquid and solid phases within the slurry. This maximizes maximizes productivity and minimizes cost by matching
pump performance and wear life. operating cycle times with scheduled mill outages.
 3

MDX Pump Range

Flowrate (m3/hr)

500 1,000 2,000 5,000 10,000 20,000

200 60

180 54

160 48

140 42

400

600
MDX 500
200

MDX 00
MDX 0

MDX 0

650
MDX 50
350

750
150

25

45
3

5
120

Head (m)
Head (ft)

36
MDX

MDX
MDX

MDX
MDX

MDX

MDX
100 30

80 24

60 18

40 12

20 6

0 0
1,000 10,000 100,000
Flowrate (gpm)

LCC Pump Range LSA S Pump Range

Flowrate (m3/hr) Flowrate (m3/hr)
100 1,000 10,000 100 1,000 10,000
400
54

70
4 LSA

300 80
21SA

22x2

300
3x4 L

53 60
Head (m)
Head (ft)
Head (m)
Head (ft)

C 26

28

200
24
0
6
2

26x LSA 48
8
C

A 44
2
16x1 LSA 36
A 39
LCC 1

LCC 9

LCC 1

LCC 2

SA 5
0 LCC

12 L 5
12 LC

16 LC

SA 3

200
25
25
21

35
LSA

8 LS
6 LS

40
LSA
LSA
LSA

28 L
3x4

2x3

4x6

6x8
8x1

24
21
10 x

14 x

4
8x10

18x1
12x1

20x
6x8
4x6
4x6

10x
LSA

100
100
2x3

18 20

0 0 0 0
100 1,000 10,000 100 1,000 10,000 100,000
Flowrate (gpm) Flowrate (gpm)
4 GIW Hard Rock Pumps

Rock Solid Mill Duty Solutions

GIW pumps and hydrocyclones are designed to work at patented designs and extensive real world experience to
the heart of the mill circuit tackling the most extreme duty maximize productivity and minimize cost by matching
conditions. GIW expertly combines advanced materials, operating cycle times with scheduled mill outages.

MDX / LSA

LCC
LCC
ZW

LSA HP / TBC

Copper Grinding and Concentrator Plant

MINE SITE CONCENTRATORS

(not shown in diagram)
Grinding Circuit Flotation Circuit
Ground Water Levelling Mine Dewatering · MDX · HVF
· B Pump · LSA (HP) · Hydrocyclone · LSA · LSA
· UPA Series · LCC-M · Multitec · LCC XH · LCC-M
· LCC-R · Amarex KRT · LCV · LCC-R
· ZW · ZW
· Hydrocyclone · KWP
 5

Rock Solid Process Solutions

Our extensive knowledge, along with a global support network, ensures
effective mineral processing solutions specific to your operation. From
slurry to waste water we have every step of the pumping process covered.

HYDROCYCLONES

HVF

HEAP LEACHING PLANTS METAL REFINERY

(not shown in diagram) (not shown in diagram)
Tailings Process Water
· LSA · Etanorm Chemicals Pregnant Liquid · CPKN
· TBC · Omega · CPKN · CPKN · KWP
· LCC · RDL · KWP
· Hydrocyclone · Amarex KRT
· B Pump
6 GIW Hard Rock Pumps

Most Severe

MDX
Q m³/h 14,000
The latest technology from GIW provides superior wear life and increased uptime handling Hm up to 90
your most aggressive slurry applications. Ideal for grinding circuits, SAG and Ball Mill p bar up to 16
discharge and cyclone feed. T °C up to +120

LSA-S
Q m³/h 14,000
Premium design, hard iron pumps for long wear life while handling severe slurries. The Hm up to 90
basic, single wall construction and heavy suction, hard metal wet end combined with the p bar up to 16
cartridge bearing assembly provides maximum reliability and easy maintenance. T °C up to +120

TBC
Q m³/h 18,200
A high-pressure design, these pumps are constructed as horizontal, end suction centrifugal Hm up to 90
pumps to give maximum resistance to wear while simplifying maintenance. The conventional p bar up to 55
single-wall design transfers stress loads to non-wearing side plates in high pressure applications. T °C up to +120

LCV
Q m³/h 1,360
Vertical cantilever, rugged hard metal sump pump with bottom suction and no submerged Hm up to 38
bearings. Includes replaceable wet end parts in metal alloys with a durable mechanical end. p bar up to 10
Ideal for industrial process pumping, tailings disposal in mining and pit use. T °C up to +120

Hydrocyclone

GIW‘s line of hydrocyclones features a patented long wearing design that can reduce T °C up to +120
rebuild time by up to 75%. Diameters available up to 840mm.

Heavy Duty

LCC-M / LCC-R
Q m³/h 3,865
The hydraulic wet end consists of three components: a shell or casing, an impeller and a Hm up to 90
suction plate/liner to permit easy removal for maintenance and inspections. Reliable pumps
p bar up to 16
for high discharge head, mildly corrosive slurries and a wide range of particle sizes.
T °C up to +120

HVF (High Volume Froth) Pump

Q m³/h 400
GIW’s HVF pump provides continuous operation without shutdown or operator intervention. Hm up to 35
The new hydraulic design removes air from the impeller eye while the pump is running,
and the pump can retrofit into any existing application. It is environmentally-friendly p bar up to 10
and cost effective. T °C up to +120

ZW
Q m³/h 400
Vertical cantilever, rugged hard metal sump pumps with top and bottom suction, no sub- Hm up to 35
merged bearings. Replaceable wet end parts in metal alloys with a durable mechanical end. p bar up to 10
T °C up to +120
 7

Process

UPA 100 – 250C

Q m³/h 840
Hm up to 460
Multistage submersible borehole pump with a non-return valve integrated in the discharge
T °C up to +50
nozzle. Ideal for maintaining/lowering of ground water levels in mines.

Multitec
Q m³/h 850
Hm up to 630 (800 )
High-pressure pump in ring-section design, with axial or radial suction nozzle and cast
p bar up to 63 (80)
radial impellers. Design to ATEX. Ideal for water supply systems and general industry.
T °C up to +200

KWP
Q m³/h 1300
Horizontal, radially split volute casing pump in back pull out or close coupled design, single Hm up to 100
stage, single entry, available with various impeller types: non clogging impeller, free flow p bar up to 10
impeller. Design to ATEX. Ideal for all types of slurries without stringy substances and pulps
up to 5% bone dry with a maximum density of 1.1 kg/dm 3. T °C up to +280

Amarex KRT
Q m³/h 10800
Vertical, singlestage submersible motor pump in close coupled design, various impeller types, for Hm up to 100
wet or dry installation, stationary and transportable version. Design to ATEX. Can handle all p bar –
types of abrasive or aggressive waste water. T °C up to +60

CPKN
Q m³/h 4150
Horizontal, radially split volute casing pump in back pull out design to EN 22 858 / ISO Hm up to 185
2858 / ISO 5199, single stage, single entry, with radial impeller. Also available as variant p bar up to 25
with “wet” shaft, conical seal chamber, heatable volute casing (CPKNO-CHs) and/or
semi open impeller (CPKNO). Design to ATEX. Suitable for heap leaching applications. T °C up to +400

Etanorm/Etanorm R
Q m³/h 1900
Horizontal, long coupled, single-/two-stage volute casing pump in back pull out design. Hm up to 170
Replaceable shaft sleeves/shaft protecting sleeves and wear rings. Design to ATEX. Ideal for p bar up to 25
water supply systems. T °C up to +105

Omega
Q m³/h 2880
Axially split, single-stage volute casing pump for horizontal or vertical installation with Hm up to 100
double-entry radial impeller, connection flanges drilled to DIN, ISO, BS or ANSI standards. p bar up to 10
Ideal for raw water or reclaim water applications. T °C up to +280

B Pump
Q m³/h 2000
The assembly is formed by turbine assembly, discharge column and drive stand (for solid Hm up to 300
shaft driver) or distributor (for hollow shaft driver). Ideal for raw water applications. p bar up to 20
T °C up to +80

RDL / RDLO
Q m³/h 10000
Single-stage, axially split volute casing pump for horizontal or vertical installation with Hm up to 240
double-entry radial impeller, mating flanges to DIN, ISO, BS or ANSI. p bar up to 25
T °C up to +70
First Class Service Worldwide
Manufacturing Centers REGEN Service Centers

0000.000 / 4.12 / Subject to technical modifications.

GIW Industries, Inc.

5000 Wrightsboro Road
Grovetown, Georgia 30813-2842, USA
Telephone +1-706-863-1011
Fax +1-706-860-5897
www.giwindustries.com

A KSB Company .