Scribd Logo
Upload

Welcome to Scribd!

  • 907 views

    Check List For Installation of Earthing System: Contractor: Sub-Contractor

    Uploaded by

    Ryn Rcio
    The document is a checklist for installing an earthing system that contains steps to check pre-installation, the earthing system installation, and testing. It includes items like verifying equipment is bonded according to specifications, checking earthing wire connections are installed properly according to drawings, and testing that earthing resistance is less than 1 ohm. The contractor and subcontractor must sign off on the checklist after completion.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Check List For Installation of Earthing System: Contractor: Sub-Contractor

    Uploaded by

    Ryn Rcio
    907 views4 pages
    The document is a checklist for installing an earthing system that contains steps to check pre-installation, the earthing system installation, and testing. It includes items like verifying equipment is bonded according to specifications, checking earthing wire connections are installed properly according to drawings, and testing that earthing resistance is less than 1 ohm. The contractor and subcontractor must sign off on the checklist after completion.

    Original Title

    271900027-Inspection-Checklist-for-Installation-of-Earthing-System.xlsx

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a checklist for installing an earthing system that contains steps to check pre-installation, the earthing system installation, and testing. It includes items like verifying equipment is bonded according to specifications, checking earthing wire connections are installed properly according to drawings, and testing that earthing resistance is less than 1 ohm. The contractor and subcontractor must sign off on the checklist after completion.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    907 views4 pages

    Check List For Installation of Earthing System: Contractor: Sub-Contractor

    Uploaded by

    Ryn Rcio
    The document is a checklist for installing an earthing system that contains steps to check pre-installation, the earthing system installation, and testing. It includes items like verifying equipment is bonded according to specifications, checking earthing wire connections are installed properly according to drawings, and testing that earthing resistance is less than 1 ohm. The contractor and subcontractor must sign off on the checklist after completion.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    CHECK LIST FOR INSTALLATION OF EARTHING SYSTEM

    Contractor : Form No:


    Rev No:
    Sub-Contractor : Page: 1 of

    SECTION OF WORK: LOCATION:

    LEVEL:

    Checked by Checked by
    Stage Item

    Check against approved electrical shop


    drawings.

    Pre-installation Check if the sleeve level and thickness of


    the pipes are as per approved shop
    drawings. Seal all sleeves as per
    specification.
    Check if sizes of the earthing wires are as
    per the approved shop drawing.
    Check cable trays, trunking, and equipment
    Equipotentially bonded as per project
    specification.
    Check if locations and sizes of earth bar are
    as specification and approved shop
    drawings.
    Check if that earthing wire(s) is connected
    Earthing System to equipment as per shop drawing in proper
    Installation way.

    Check the level & location of earth pit as


    per approved shop drawings.

    Check if earth pit fixing is as specification


    and approved shop drawings.

    Check the connection(s) of earthing wire to


    earthing rod electrode.

    Check if earthing resistance reading is less


    than 1 Ohm and submit earth resistance
    Testing report.
    Check Earth Continuity test for all metal
    parts and equipment of building.

    Sub. Cont. Date: Contractor Date: Consultant

    Name: Sign: Name: Sign: Name:

    Page 1 of 4
    Page 2 of 4
    LLATION OF EARTHING SYSTEM
    Form No:
    Rev No:
    Page: 1 of 1

    Checked by
    Date

    Date:

    Sign:

    Page 3 of 4
    Page 4 of 4

    You might also like