Scribd Logo
Upload

Welcome to Scribd!

  • 122 views

    Question Bank Introduction To CAM: Noble Group of Institutions, Junagadh

    Uploaded by

    janak
    This document contains a question bank for the subject CAM (Computer Aided Manufacturing) from the Department of Mechanical Engineering at Noble Group of Institutions in Junagadh, India. It includes questions organized into several sections on topics like introduction to CAM, NC/CNC machine tools, part programming, programmable logic controllers, group technology and CAPP, flexible manufacturing systems, robot technology, and computer integrated production management systems. The questions are meant to assess students' understanding of key concepts and applications of CAM technologies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Question Bank Introduction To CAM: Noble Group of Institutions, Junagadh

    Uploaded by

    janak
    122 views5 pages
    This document contains a question bank for the subject CAM (Computer Aided Manufacturing) from the Department of Mechanical Engineering at Noble Group of Institutions in Junagadh, India. It includes questions organized into several sections on topics like introduction to CAM, NC/CNC machine tools, part programming, programmable logic controllers, group technology and CAPP, flexible manufacturing systems, robot technology, and computer integrated production management systems. The questions are meant to assess students' understanding of key concepts and applications of CAM technologies.

    Original Description:

    Question bank for Computer Aided Manufacturing

    Original Title

    Question Bank- CAM

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a question bank for the subject CAM (Computer Aided Manufacturing) from the Department of Mechanical Engineering at Noble Group of Institutions in Junagadh, India. It includes questions organized into several sections on topics like introduction to CAM, NC/CNC machine tools, part programming, programmable logic controllers, group technology and CAPP, flexible manufacturing systems, robot technology, and computer integrated production management systems. The questions are meant to assess students' understanding of key concepts and applications of CAM technologies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    122 views5 pages

    Question Bank Introduction To CAM: Noble Group of Institutions, Junagadh

    Uploaded by

    janak
    This document contains a question bank for the subject CAM (Computer Aided Manufacturing) from the Department of Mechanical Engineering at Noble Group of Institutions in Junagadh, India. It includes questions organized into several sections on topics like introduction to CAM, NC/CNC machine tools, part programming, programmable logic controllers, group technology and CAPP, flexible manufacturing systems, robot technology, and computer integrated production management systems. The questions are meant to assess students' understanding of key concepts and applications of CAM technologies.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Noble Group of Institutions, Junagadh.

    Faculty of Engineering
    Department of Mechanical Engineering

    Semester: BE 7th Subject: CAM (2171903) Year: 2018-19


    Faculty: Mr. Rohan S. Kariya Class: MA & MB

    QUESTION BANK

    Introduction to CAM

    Sr. No. Question


    1 Draw and explain the CIM wheel and state the benefits of CIM.
    2 What is CIM? Explain Components of CIM.
    3 What are the different types of manufacturing? Make an assessment of the
    extent of computer control in specific cases of each types of manufacturing.
    4 What are the objectives of CIM? Which major functional areas of the
    manufacturing enterprise considered for achieving CIM objectives?
    5 What are the benefits of CIM?

    NC/CNC Machine Tools

    Sr. No. Question


    1 How does the structure of NC/CNC machine tools differ from conventional
    machine tools?
    2 Classify CNC machines tools on the basis of : (i) Types of motion control
    (ii) According to programming Method.(iii) According to types of controllers
    3 Describe with sketch the working and construction of recirculating ball screw
    used in CNC machine tools.
    4 Describe the principle of working of an automatic pallet changer and
    automatic tool changer.
    5 State advantages and limitations of CNC machine tools.
    6 Explain clearly the difference between NC and CNC machine.
    7 Explain the feedback system of NC/CNC machine.

    Mechanical Engg. Dept. – NGI - Junagadh.


    Noble Group of Institutions, Junagadh.
    Faculty of Engineering
    Department of Mechanical Engineering

    Part Programming

    Sr. No. Question


    1 Explain linear and circular interpolations used in turning. Draw a neat sketch
    of circular interpolation
    2 Which are formats used for manual part programming? Write word address
    format.
    3 Explain with neat sketch, axis designation for CNC turning center and CNC
    vertical milling machine
    4 What are canned cycles? Discuss how a canned cycle is useful in writing a part
    program?
    4 Explain cutter radius compensation and tool length compensation.
    5 Write a CNC program using appropriate G and M code to turn component as
    Shown in figure (1). Raw material: MS Φ32 X 50 mm, cutting speed V= 40
    m/min and feed=0.1, Assume suitable data for depth of cut.

    6 Develop a CNC program, using G and M code, to cut a slot for the component
    shown in fig.1 by using an end mill of diameter 6mm. The depth of slot is
    5mm. Assume suitable data for speed, feed, etc.

    7 State various automated programmed tool languages.


    8 Explain types of statements used in APT language.

    Mechanical Engg. Dept. – NGI - Junagadh.


    Noble Group of Institutions, Junagadh.
    Faculty of Engineering
    Department of Mechanical Engineering

    Programmable logic controllers

    1 What are the essential elements of a PLC system?


    2 Define PLC. Discuss the relay device components used in it.
    3 Draw and explain PLC architecture.
    4 What is a PLC? Explain major components of a PLC. List various applications
    of PLC.

    Group Technology and CAPP

    Sr. No. Question


    1 What is Group technology? / What do you mean by key machine concept in
    GT?
    2 Differentiate between product layout and group technology layout.
    3 Explain all the methods of grouping parts into part families.
    4 What are the objectives of cellular manufacturing? Explain the different types
    of machine cell design.
    5 Apply the rank order clustering technique to the part machine incidence matrix
    in the following table to identify logical part families and machine groups.
    Parts are identified by letters and machines are identified numerically.

    6 What are the advantages and hurdles in implementation of group technology?


    7 What are the major functions of process planning? What are the main
    problems associated with manual process planning?
    8 What is CAPP? Explain Variant and generative type CAPP system with its
    advantages and limitations.

    Mechanical Engg. Dept. – NGI - Junagadh.


    Noble Group of Institutions, Junagadh.
    Faculty of Engineering
    Department of Mechanical Engineering

    Flexible Manufacturing System

    1 What is FMS? Explain basic components of FMS.


    2 Explain the types of flexibilities associated with FMS. State the factors on
    which these flexibilities depend.
    3 Describe various layouts used in FMS.
    4 Write a note on: Automated guided vehicles associated with FMS.
    5 Describe, with neat sketch, ASRS system used in FMS.
    6 Explain tool supply system in FMS.
    7 Explain the role of CMM in computer aided quality control. What are the
    different elements of CMM?

    Robot Technology

    1 Define robot. Enlist and explain different elements of robot.


    2 Explain any two grippers in detail.
    3 What are the different types of actuators used in robots?
    4 Explain visual and tactile sensors used in robot.
    5 Explain with neat sketch, basic configuration of robots
    6 Discuss various applications of robots.
    7 Explain on-line programming method and off-line programming method of
    robots in detail.
    8 Which parameters are to be considered for robot specification & selection of
    robot? Explain in detail.

    Mechanical Engg. Dept. – NGI - Junagadh.


    Noble Group of Institutions, Junagadh.
    Faculty of Engineering
    Department of Mechanical Engineering

    Computer Integrated production Management System

    1 What are the functions of process planning?


    2 What is computer integrated production management system? Explain with
    neat flow chart.
    3 What are the objectives of MRP system?
    4 State various inputs of MRP system. Draw MRP structure.
    5 Differentiate between MRPI and MRPII.
    6 Explain in brief, about the JIT philosophy.

    Mechanical Engg. Dept. – NGI - Junagadh.

    You might also like