This document summarizes a Crouzet 35 mm relay timer. It can function as a multi-function or mono-function timer with multi-range, multi-voltage capabilities. It has a single changeover relay output rated for 8A at 250V. Key specifications include timing ranges from 1 second to 100 hours, supply voltage of 12-240V AC/DC, IP20/IP40/IP50 protection, CE and UL certifications, and DIN rail mounting. Accessories include an 8-pin connector base.
This document summarizes a Crouzet 35 mm relay timer. It can function as a multi-function or mono-function timer with multi-range, multi-voltage capabilities. It has a single changeover relay output rated for 8A at 250V. Key specifications include timing ranges from 1 second to 100 hours, supply voltage of 12-240V AC/DC, IP20/IP40/IP50 protection, CE and UL certifications, and DIN rail mounting. Accessories include an 8-pin connector base.
This document summarizes a Crouzet 35 mm relay timer. It can function as a multi-function or mono-function timer with multi-range, multi-voltage capabilities. It has a single changeover relay output rated for 8A at 250V. Key specifications include timing ranges from 1 second to 100 hours, supply voltage of 12-240V AC/DC, IP20/IP40/IP50 protection, CE and UL certifications, and DIN rail mounting. Accessories include an 8-pin connector base.
This document summarizes a Crouzet 35 mm relay timer. It can function as a multi-function or mono-function timer with multi-range, multi-voltage capabilities. It has a single changeover relay output rated for 8A at 250V. Key specifications include timing ranges from 1 second to 100 hours, supply voltage of 12-240V AC/DC, IP20/IP40/IP50 protection, CE and UL certifications, and DIN rail mounting. Accessories include an 8-pin connector base.
Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external power supply to the control input 3-wire sensor control option
Part numbers
Type Functions Timing Output Nominal rating Connections Supply voltage
88 867 103 OUR3 A - At - B - C - H - Ht - Di - D - Ac - Bw 0,1s→100h 1 changeover relay 8A 8-pin 12 →240 V AC / DC
Specifications
Timing Timing ranges (7 ranges) 1 s - 10 s - 1 min - 10 min - 1 h - 10 h - 100 h TK2R1 : 0.6s - 2.5s - 20s - 160 s Repetition accuracy with constant parameters ± 0.5 % (IEC/EN 1812-1) Drift Temperature ± 0,05 % / °C Drift Voltage ± 0.2 % / V Display accuracy according to IEC/EN 61812-1 ± 10 % / 25 °C Minimum pulse duration typically (relay version) 30 ms Minimum pulse duration typically (solid state version) 50 ms Minimum pulse duration typically (relay version under 100 ms load) Maximum reset time by de-energisation typically (relay 100 ms version) Maximum reset time by de-energisation typically (solid 350 ms state version) Immunity from micro power cuts : typical > 10 ms Supply Multi-voltage power supply Depending on version Frequency (Hz) 50 / 60 Operating range 85 to 110 % Un (85 to 120 % Un for 12V AC/DC) Operating factor 100 % Max. absorbed power 0,6 W 24 V AC/DC 1,5 W 230 V AC 32 VA 230 V AC Output specification 1 or 2 changeover relays, AgNi (cadmium-free) 2000 VA/80 W Rated power 2000 VA/80 W Maximum breaking current 8 A AC 8A DC Minimum breaking current 10 mA / 5 V DC Voltage breaking capacity 250 V AC/ DC Electrical life (operations) 10 5 operations 8 A 250 V resistive Mechanical life (operations) 5x106 Breakdown voltage acc. to IEC/EN 61812-1 2.5 kV /1 min / 1 mA / 50 Hz Impulse voltage acc. to IEC/EN 60664-1, IEC/EN 61812-1 5 kV, wave 1.2 / 50 μs Solid state output Rated power 0,7 A AC/DC 20 °C (0,5 A UL) Derating 5 mA / °C Maximum admissible current 20 A ≤ 10 ms Minimum breaking current 10 mA Leakage current < 5 mA Voltage breaking capacity 250 V AC/ DC Maximum voltage drop at terminals 3 wire 4V - 2 wire 8V Electrical life (operations) 108 Mechanical life (operations) 108 Breakdown voltage acc. to IEC/EN 60664-1, IEC/EN 2.5 kV to 1 mA / 1 min 60255-5 Input type Volt-free contact 3-wire PNP output control option residual voltage : 0.4V whatever the timer power supply General characteristics
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com Conformity to standards IEC/EN 61812-1 IEC/EN 61000-6-1 IEC/EN 61000-6-2 IEC/EN 61000-6-3 IEC/EN 61000-6-4 Certifications CE, UL, cUL, CSA, GL Temperature limits use (°C) -20 →+60 Temperature limits stored (°C) -30 →+60 Installation category Voltage surge category (acc. to IEC/EN 60664-1) Creepage distance and clearance acc. to IEC/EN 60664-1 4 kV / 3 Protection (IEC/EN 60529) IP 20 IP 40 Degree of protection acc. to IEC/EN 60529 Front face IP 50 (except Tk2R1) Vibration resistance f = 10 55 Hz acc. to IEC/EN 60068-2-6 A = 0,35 mm Relative humidity no condensation acc. to IEC/EN 60068- 93 % sans condensation 2-30 Electromagnetic compatibility - Immunity to electrostatic Level III (Air 8 KV / Contact 6 KV) discharges acc to IEC/EN 61000-4-2 Immunity to radiated, radio-frequency, electromagnetic Level III 10V/m (80 M Hz to 1 G Hz) field acc. IEC/EN 61000-4-3 Immunity to rapid transient bursts acc. to IEC/EN 61000-4- Level III (direct 2kV / Capacitive coupling clamp 1 KV) 4 Immunity to shock waves on power supply acc. to IEC/EN Level III (2 KV / common mode 2 KV/residual current mode 1KV) 61000-4-5 Immunity to radio frequency in common mode acc. to Level III (10V rms : 0.15 M Hz to 80 M Hz) IEC/EN 61000-4-6 Immunity to voltage dips and breaks acc. to IEC/EN 61000- 30 %/10 ms 4-11 60 %/100 ms > 95 %/5 s Mains-borne and radiated emissions acc. to EN 55022 Class B (CISPR22), EN55011 (CISPR11) Fixing : Symmetrical DIN rail 35 mm Connection capacity - without ferrule 2 x 2,5 mm2 Connection capacity - with ferrule 2 x 1,5 mm2 Spring terminals, 2 terminals per connection point - 1,5 mm2 flexible wire Spring terminals, 2 terminals per connection point - rigid 2,5 mm2 wire Housing material Self-extinguishing Weight : casing 17,5 mm 60 g Weight : casing 22,5 mm 90 g Weight : plug-in casing 80 g
80
Accessories
Accessories Code
8-pin connector base 25 622 128
Display State displayed by 1 LED - Flashing green when on Green LED operation indicator Pulsing : - timer on, no timing in progress (except functions Di-D and Li-L) Flashing : - timing in progress Permanently lit : - Relay waiting, no timing in progress
Dimensions (mm)
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com
Dimensions (mm) Accessories
Curves Function A
Function A
Delay on energisation 1 relay
Curves Function Ac
Function Ac
Timing after closing and opening of control contact 1 relay
Curves Function At
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com
Function At
Timing on energisation with memory 1 relay
Curves Function B
Function B
Timing on impulse one shot
Curves Function Bw
Function Bw
Pulse output (adjustable) 1 relay
Curves Function C
Function C
Timing after impulse 1 timer
Curves Function D
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com
Function D
Flip-flop 1 relay Pause start
Curves Function Di
Function Di
Flip-flop 1 relay Pulse start
Curves Function H
Function H
Timing on energisation 1 relay
Curves Function Ht
Function Ht
Delay on energisation with memory 1 relay
Connections 8-pin 1 relay output
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 www.crouzet.com
Functions
Functions A - At / H - Ht / B / C / Di - D / Ac /Bw
Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected
