GALAXY 4016

GALAXY 4016 GSM

USER MANUAL
GALAXY 4016 GSM

Document No.:___________

Please read this manual carefully before operating your security system and retain it
for future reference. If you have any questions related to our products, kindly write to
us at [email protected].

WARRANTY
This product is sold subject our standard warranty conditions and is warranted against
defects in workmanship for a period of one year. In the interest of continuing improvement
of quality, customer care and design, the company reserves the right to amend
specifications and features without giving prior notice. The company also reserves the
right to replace existing devices with new upgraded versions under the warrantee policy.
INTRODUCTION
Congratulations on being the proud owner of Galaxy GSM, a step into ultramodern
protection. Panel was created to meet today's technologically advanced demands of
integrating security with automation. Galaxy GSM, our super control panel is 40 zone panel
with a built-in 2 message 20 number GSM auto dialer, which will automatically call you, your
friends, your family and the police in case of an emergency. Its automatic arming and
disarming facility brings easy security to your door step. The ability to protect your lifestyle
and automate it all at the same time. We wish you a peaceful life and an enjoyable Galaxy
experience!

ABOUT SECURICO
Securico has completed 34 successful years of manufacturing excellence and offers a
complete range of Electronic Security Solutions including Intruder Alarms, CCTV Systems,
Fire Alarms, Video Door Phones, Energy Saving Devices and a State of the Art 24X7 Video
& Alarm Monitoring Station. Securico is the chosen brand of more than 3000 security
system integrators in over 250 cities across India. With a highly qualified in house R&D
team and modern manufacturing plant, Securico is totally committed to providing the
security industry with high tech, multi functional, top quality, low cost yet world class
products. Securico is privileged to have a large number of Indian and multinational banks
along with thousands of corporate, commercial, retail and residential users as satisfied
clients which has been achieved through three decades of impeccable customer service
and care.
GALAXY 4016 GSM

FEATURES

Ÿ Micro-controller based
Ÿ 24 wired zones expandable to 40 zones
Ÿ Can connect up to 16 wireless sensors by adding wireless receiver
module
Ÿ Inbuilt GSM based speech and SMS dialer module
Ÿ Separate remote key pad with 16x4 LCD display and 16 key back
lit key pad
Ÿ Can attach up to 3 additional LCD display remote key pads
Ÿ Android app to operate and program panel
Ÿ 1 admin code and 3 user codes
Ÿ 3 sub partitions with programmable schedule
Ÿ Scheduled partitions and zones
Ÿ Automatic arming and/or disarming, optional and programmable
Ÿ One day holiday programmable for automatic disarming feature
Ÿ GSM dialer module supports 2 speech / voice messages
Ÿ Separate intrusion message
Ÿ Separate fire message
Ÿ 10 telephone numbers for intrusion message
Ÿ 10 telephone numbers for fire message
Ÿ 20 second recording time for each message
Ÿ Multiple Alarm and Status SMS
Ÿ Alarm SMS with alarm type, zone number, time and date
information
Ÿ Alarm SMS types - intrusion alarm, panic alarm, fire alarm,
tamper and wrong code
Ÿ Status SMS sent to admin user on first number - system arm,
admin disarm, user disarm, system on, AC power on, AC power
off, low battery, admin or user code change, telephone number/s
added, telephone number/s deleted, daily heath status.
Ÿ Daily System On health status SMS sent once a day to admin
user on first number
Ÿ Power status SMS for AC power on/off, low battery
Ÿ User editable name and address for alarm SMS
Ÿ Message playback
Ÿ Android App is SMS based, no internet required for daily use
Ÿ All key panel functions and features programmable from app
Ÿ All alarm alerts and status events received, displayed and
logged in the app
Ÿ Panel can also be operated through mobile via simple SMS
commands
Ÿ Automatic temporary bypass of open 24 hour zones in case
of open zone
Ÿ Detectors connected to fire zones are automatically reset
after one hour in case of an alarm
Ÿ Optional panic and fire zone expander modules
Ÿ Inbuilt silent panic zone and option of up to 4 additional silent
panic zones through zone expander module
Ÿ Built in provision for 12V 7AH SMF battery
Ÿ Zone omitting facility
Ÿ Silent arming
Ÿ Night mode arming
Ÿ Intrusion log with time and date
Ÿ 500 Event log for alarms and menu access
Ÿ Open and close information for alarm zones
Ÿ Dedicated panic, fire and quick arm keys
Ÿ Silent dialing
Ÿ Power failure indication
Ÿ Battery strength display with audio indication in case of low
battery
GALAXY 4016 GSM

Ÿ Blown fuse indication on LCD display

Ÿ Last open zone status is indicated on LCD display
Ÿ GSM signal strength display
Ÿ 3 status LED – armed, power and dialing
Ÿ Automatic re-arming after an intrusion
Ÿ System goes into alarm state after three incorrect code
attempts
Ÿ Previous state (armed or disarmed) retained when panel is re-
powered
Ÿ Independent entry delay time 2 to 255 seconds
Ÿ Independent exit delay time 2 to 255 seconds
Ÿ Sounder time 2 to 20 minutes
Ÿ Non-volatile memory
Ÿ Inbuilt SMPS with short circuit, over load and thermal shut
down protection
Ÿ Inbuilt tamper switch and vibration detector for advanced
tamper detection
Ÿ Remote key pad housed in sleek white ABS body with key pad
cover
Ÿ Main control station panel in sturdy sheet metal body
CONTENTS

1 GETTING STARTED 01
1-1 GET TO KNOW YOUR GALAXY 01
1-2 CONFIGURATION 03
1-2-1 PREVIOUS SETTING MODE 03
1-2-2 FACTORY SETTING MODE 04
1-3 FACTORY SETTING 05
1-4 SYSTEM STATUS 07
1-5 OPERATING PROCEDURES 07
1-6 ZONES 07
2 OPERATING PROCEDURE 1 -
THROUGH REMOTE KEY PAD 09
2-1 TO ARM THE SYSTEM 09
2-1-1 FULL ARMING 09
2-1-2 NIGHT ARMING 10
2-1-3 SILENT ARMING 10
2-2 TO DISARM THE SYSTEM 11
2-3 MENU OPTIONS 11
2-4 OMIT ZONES & ARM SYSTEM 12
2-5 INTRUSION LOG 14
2-6 CHANGE CODE 15
2-6-1 CHANGE ADMIN CODE 15
2-6-2 CHANGE USER CODES 17
2-7 SET TIME & DATE 18
2-7-1 SET TIME 18
2-7-2 SET DATE 19
GALAXY 4016 GSM

2-8 TIMER SETTING 20

2-8-1 ENTRY TIME 21
2-8-2 EXIT TIME 21
2-8-3 SOUNDER TIME 22
2-9 AUTO OPERATION 22
2-9-1 ARMING TIME 23
2-9-2 DISARMING TIME 24
2-9-3 SET HOLIDAY 24
2-10 TEXT SMS 25
2-11 BUTTONS ON THE KEY PAD 26
2-11-1 PANIC BUTTON 26
2-11-2 FIRE ALARM 26
3 OPERATING PROCEDURE 2 - THROUGH SMS 26
3-1 FULL ARM THE SYSTEM 27
3-2 DISARM THE SYSTEM 27
3-3 CHANGE THE ADMIN CODE 27
3-4 CHANGE DELAY TIME 28
3-4-1 CHANGE ENTRY TIME 28
3-4-2 CHANGE EXIT TIME 28
3-5 CHANGE SOUNDER TIME 28
3-6 SET AUTO OPERATION 29
3-6-1 SET AUTOMATIC ARMING 29
3-6-2 SET AUTOMATIC DISARMING 29
3-6-3 SET HOLIDAY 30
3-7 EDIT SCHEDULE 30
3-8 EDIT NUMBERS 31
3-8-1 EDIT INTRUSION NUMBERS 31
3-8-2 EDIT FIRE NUMBERS 32
3-9 EDIT NAME AND ADDRESS 33
3-10 ALARM RESET 33
3-11 SOUNDER STOP 34
3-12 RECORD VOICE MESSAGE 34
3-12-1 RECORD INTRUSION VOICE MESSAGE 34
3-12-2 RECORD FIRE VOICE MESSAGE 35
3-13 PLAY VOICE MESSAGE 35
3-13-1 PLAY INTRUSION VOICE MESSAGE 35
3-13-2 PLAY FIRE VOICE MESSAGE 36
4 OPERATING PROCEDURE 3 -
THROUGH MOBILE APP 36
5 OTHER USEFUL INFORMATION 36
5-1 FORGOTTEN CODE 36
5-2 KEY PAD AND LCD LIGHTING 37
5-3 SAFETY FUSES 37
5-5 RETRIEVAL OF PREVIOUS SETTINGS 37
5-6 UNIQUE BYPASS FEATURE OF 24 HOUR
ACTIVE ZONE 38
6 TECHNICAL SPECIFICATIONS 39
7 CONNECTION DIAGRAM 42
GALAXY 4016 GSM

1 - GETTING STARTED

1-1 GET TO KNOW YOUR GALAXY

FRONT VIEW 1

4
3
2

5
6
10
9 7
8

11

BACK VIEW

16

15

14

01
FRONT VIEW

1. On Screen LCD Display with back light

2. Armed Indication LED
3. Dialing Indication LED
4. Power Indication LED
5. Panic Button - Onboard Panic Switch
6. Full Button - For full arming
7. Enter Button
8. Next Button
9. Dial Button
10. Exit Button
11. Key Pad Cover

BACK VIEW

14. Speaker
15. Wire Opening Slots
16. Flexible Slots for Screw Mount Installation

02
GALAXY 4016 GSM

1-2 CONFIGURATION

The Remote Keypad(s) must be connected to the main control

station prior to connecting it to a power supply. When the Remote
Key Pad is connected to the main control station, the screen will
display:

GALAXY

1- PREVIOUS
SETTING
2- FACTORY
SETTING

POWER DIALING ARMED

1-2-1 PREVIOUS SETTING MODE

Press 1 for PREVIOUS SETTING (in the previous setting mode,

system will retrieve its last status of ARM/ DISARM with previous
ADMIN CODE

GALAXY

RESTORING
PREVIOUS
SETTINGS

POWER DIALING ARMED

GALAXY

UPDATING DATA...

POWER DIALING ARMED

03
The screen will display:

GALAXY

00:00 SUN 01 JAN

POWER DIALING ARMED

1-2-2 FACTORY SETTING MODE

Press 2 to FACTORY SETTING, The system will reset to Factory Setting

Mode.

GALAXY

RESTORING
FACTORY
SETTINGS

POWER DIALING ARMED

GALAXY

UPDATING DATA...

POWER DIALING ARMED

(In this MODE, system will reset to Factory Default Settings.)

Note: For factory setting, please see 1-3 FACTORY SETTING

04
GALAXY 4016 GSM

1-3 FACTORY SETTING

CODES
ENTER + USER ID + USER CODE
ENTER + UI + XXXX

UI = USER ID XXXX = USER CODE

USER IDs
User IDs are fixed and cannot be changed.
ADMIN : 00
USER 1 : 11
USER 2 : 21
USER 3 : 31

FACTORY SETTINGS:
ADMIN CODE : ENTER + 00 + 1234
USER 1 CODE : ENTER + 11 + 1234 (Zone No. 1 to 8)
USER 2 CODE : ENTER + 21 + 1234 (Zone No. 20)
USER 3 CODE : ENTER + 31 + 1234 (Zone No. 21)

ZONE NO DESCRIPTION USER SIREN / SILENT

Zone 1 Delay ADMIN/USER-1 SIREN / SILENT
Zone 2 Delay ADMIN/USER-1 SIREN / SILENT
Zone 3 Delay ADMIN/USER-1 SIREN / SILENT
Zone 4 Delay ADMIN/USER-1 SIREN / SILENT
Zone 5 Delay ADMIN/USER-1 SIREN / SILENT
Zone 6 Immediate ADMIN/USER-1 SIREN
Zone 7 Immediate ADMIN/USER-1 SIREN
Zone 8 Immediate ADMIN/USER-1 SIREN
Zone 9 Immediate ADMIN SIREN
Zone 10 Immediate ADMIN SIREN
Zone 11 Immediate ADMIN SIREN
Zone 12 Immediate ADMIN SIREN
Zone 13 Immediate ADMIN SIREN

05
ZONE NO DESCRIPTION USER SIREN / SILENT
Zone 14 Immediate ADMIN SIREN
Zone 15 Panic (24*7) ADMIN SIREN
Zone 16 Panic (24*7) ADMIN SIREN
Zone 17 Fire (24*7) ADMIN SIREN
Zone 18 Fire (24*7) ADMIN SIREN
Zone 19 Silent Panic 24*7 SILENT
Zone 20 Delay ADMIN/USER-2 SIREN / SILENT
Zone 21 Delay ADMIN/USER-3 SIREN / SILENT
Zone 22 PIR Zone ADMIN SIREN / SILENT
Zone 23 AC ON/OFF NA SILENT
Zone 24 Tamper (24*7) ADMIN SIREN
Zone 25 Panic (24*7) ADMIN SIREN
Zone 26 Panic (24*7) ADMIN SIREN
Zone 27 Panic (24*7) ADMIN SIREN
Zone 28 Panic (24*7) ADMIN SIREN
Zone 29 Silent Panic (24*7) ADMIN SILENT
Zone 30 Silent Panic (24*7) ADMIN SILENT
Zone 31 Silent Panic (24*7) ADMIN SILENT
Zone 32 Silent Panic (24*7) ADMIN SILENT
Zone 33 Fire (24*7) ADMIN SIREN
Zone 34 Fire (24*7) ADMIN SIREN
Zone 35 Fire (24*7) ADMIN SIREN
Zone 36 Fire (24*7) ADMIN SIREN
Zone 37 Fire (24*7) ADMIN SIREN
Zone 38 Fire (24*7) ADMIN SIREN
Zone 39 Fire (24*7) ADMIN SIREN
Zone 40 Fire (24*7) ADMIN SIREN

TIMER SETTINGS
ENTRY TIME : 30 SECONDS
EXIT TIME : 30 SECONDS
SOUNDER TIME : 2 MINUTES

06
GALAXY 4016 GSM

1-4 SYSTEM STATUS

DISARMED/DAY MODE
The system is in day mode when it is not armed. In this mode, only 24
hours active zones will be actively operational. The time, day and date will
be displayed on the remote key pad LCD screen.

ARMED MODE
The system is in the armed mode when all active* zones are operational
and can be triggered to raise an alarm.

1-5 OPERATING PROCEDURES

Galaxy panel can be operated through three procedures:

1. From the remote key pads
2. Through a SMS facility using a GSM sim card inside the control panel.
All functions can be executed through the remote key pads and some
main functions can be operated through the SMS facility.
3. Through Android mobile Phone

1-6 ZONES

There are six types of zones in the control panel:

ENTRY/EXIT (also called Delay): An entry/exit zone will actively raise an
alarm only if the system is armed. However, an entry / exit zone allows for
a programmed delay during which the user can enter the code and
prevent the alarm from sounding. If the user does not enter the code in
the programmed amount of time, the alarm will sound. The main entrance
is usually the entry/exit zone so as to allow the user to enter the
premises without raising the alarm. Entry/Exit zones are also referred to
as delay zones.

07
IMMEDIATE: An immediate zone will actively raise an alarm only if the
system is armed. If anyone enters the premises through an immediate
zone while the system is armed, the alarm will sound immediately.
Immediate zones usually include all the doors and windows other than the
main entry, since the user is unlikely to enter the premises through
these.

PANIC: A Panic zone is a 24 hour active zone and will raise an alarm when
the panic switch is pressed irrespective of whether the system is armed
or disarmed.

SILENT PANIC: A Silent panic zone is a 24 hour active zone and will send
ALARM SMS and call on preset numbers without raising an alarm when
the panic switch is pressed irrespective of whether the system is armed
or disarmed.

FIRE: A Fire zone is a 24 hour zone and will raise an alarm in case a fire is
detected irrespective of whether the system is armed or disarmed.

TAMPER: A Tamper zone is a 24 hour active zone and will raise an alarm in
case of tamper violation in the panel or sensors (if connected) and if the
tamper wire is cut irrespective of whether the system is armed or
disarmed.

08
GALAXY 4016 GSM

2 - OPERATING PROCEDURE 1 - THROUGH REMOTE KEY PAD

2-1 TO ARM THE SYSTEM

Arming options:
FULL ARM: The system is fully armed when all existing zones have been
armed.

2-1-1 FULL ARMING

Press ENTER
Press FULL
All zones will be armed and the screen will display:

GALAXY

22:30 SUN 01 JAN

ARMING...

AC

POWER DIALING ARMED

Delay arming beeps will sound from the remote keypad during the exit
delay.

Once the system is armed, the screen will display:

GALAXY

22:30 SUN 01 JAN

FULL ARM

AC

POWER DIALING ARMED

09
2-1-2 NIGHT ARMING

This unique feature enables you to temporarily make all delay (entry/ exit)
zones into immediate zones. In the case that all users are within the
premises when the system is armed at night and no delay zones are
required, the Night Arming feature can be used. This feature is
particularly helpful when the system is installed in a residence.
Full Night Arming:
Press ENTER
Press FULL
Press NIGHT/9
All zones will be armed and all delay zones will temporarily become
immediate zones and the screen will display:

GALAXY

22:30 MON 01 JAN

FULL ARM

AC

POWER DIALING ARMED

2-1-3 SILENT ARMING

If the delay arming beeps are not required, They can be silenced. The
system will arm itself silently ending with a long ending beep to indicate
the system is armed.
Full Silent Arming:
Press ENTER
Press FULL
Press 6 / SILENT

10
GALAXY 4016 GSM
All the zones will be armed silently and the screen will display :

GALAXY

22:30 MON 01 JAN

FULL ARM

AC

POWER DIALING ARMED

2-2 TO DISARM THE SYSTEM

Press ENTER+00ADMIN CODE to disarm all zones

Important : If the system is in alarm state, ENTER+00ADMIN CODE has
to be entered twice. The first time will switch off the sounders. The
second time will stop the automatic speech dialer. Therefore, if you wish
to stop the sounders but want the speech dialer to continue calling the
programmed numbers, enter the code only once.

Note: The control panel will only accept the admin code once the first
number has been dialed.

2-3 MENU OPTIONS

To access the Menu, Press ENTER+ 00ADMIN CODE

The admin code is used to program the entire system as well as fully
disarm it.
The following options are the main menu options.
OMIT ZONES & ARM SYSTEM
INTRUSION LOG
CODE CHANGE
SET TIME & DATE

11
TIMER SETTING
AUTO OPERATION
PLAY & RECORD MESSAGES
To select a menu option, scroll down using the NEXT button and press
ENTER
To skip and go to the next menu option press NEXT
To skip and go to the previous menu option press 0
To exit the menu and return to Day Mode, press EXIT

2-4 OMIT ZONES & ARM SYSTEM

This option allows you to omit zones temporarily and arm the system.

GALAXY

OMIT ZONES
& ARM SYSTEM

POWER DIALING ARMED

Press ENTER
GALAXY

SELECT WINDOW
1 - ZN 01 - 15
1 - ZN 16 - 30
1 - ZN 31 - 40

POWER DIALING ARMED

Select the window number as per the zone number you wish to omit.
Example: If you want omit zones from zone number 01 to 15 PRESS 1 to
select window 1

12
GALAXY 4016 GSM
The display will change to:

GALAXY

WINDOW 1 ZN01 - 15

POWER DIALING ARMED

Enter the zone numbers you wish to omit (enter 01 for Zone 1, 02 for
Zone 2 etc).
Note: 24 hour zones (PANIC, FIRE & TAMPER cannot be omitted)
Press ENTER to confirm
The display will change to:

GALAXY

WINDOW ZN01 - 15
02

POWER DIALING ARMED

PRESS EXIT
The display will change to:
GALAXY

ZONES UPDATED
PRESS ENTER TO
ARM THE SYSTEM

POWER DIALING ARMED

PRESS ENTER

13
The display will change to:
GALAXY

PRESS FULL

POWER DIALING ARMED

Press FULL to omit zones and full arm panel.

The display will change to:
GALAXY GALAXY

22:30 SUN 01 JAN 22:30 SUN 01 JAN

ARMING... FULL ARM

AC AC

POWER DIALING ARMED POWER DIALING ARMED

2-5 INTRUSION LOG

The intrusion log displays the last 500 events of alarms with alarm zone
open and close where applicable and menu access.
GALAXY

INTRUSION LOG

POWER DIALING ARMED

Press ENTER
GALAXY

INTRUSION LOG
1 - LOG DETAILS

POWER DIALING ARMED

14
GALAXY 4016 GSM
Press 1
GALAXY

LOG PAGE 001

023M 17:22 110117
000P 17:10 110117
002I 18:00 110117

POWER DIALING ARMED

Press NEXT to shift on the next page.

To skip and go to the previous menu option press 0
Last 500 intrusions can be checked with time and date.
The screen will display the last triggered zone on the second line.
Press NEXT to see zone triggered before that.

2-6 CHANGE CODE

This option allows the user to change the Admin Code.

2-6-1 CHANGE ADMIN CODE

The admin code disarms the entire system. The menu and all
programmable features can only be accessed with the admin code.

GALAXY

CHANGE CODE

POWER DIALING ARMED

PRESS ENTER

15
 GALAXY

CHANGE CODE
1 - ADMIN CODE

POWER DIALING ARMED

Press 1 to change ADMIN CODE

The screen will display:
GALAXY

NEW ADMIN CODE

POWER DIALING ARMED

Note: The code must be 4 digits numerical.

The screen will display:

GALAXY

RE-ENTER CODE

POWER DIALING ARMED

GALAXY

CHANGE CODE
SUCCESSFULLY

POWER DIALING ARMED

Note: If both new entered codes are not same an error message will
be displayed and the code will not be changed.

16
GALAXY 4016 GSM

2-6-2 CHANGE USER CODE

This option allows user to change their user codes. There are 3 users in
this panel and each user can change only their code.
Enter previous code

GALAXY

CHANGE CODE

POWER DIALING ARMED

PRESS ENTER

GALAXY

CHANGE CODE
1 - USER CODE

POWER DIALING ARMED

Press 1 to change USER CODE

The screen will display:

GALAXY

NEW USER CODE

POWER DIALING ARMED

17
The screen will display:

GALAXY

CODE CHANGE
SUCCESSFULLY

POWER DIALING ARMED

Note: If both new entered codes are not same, an error message will be
displayed and the code will not be changed.
The screen will display:

GALAXY

PASSWORD NOT
MATCHED
PLEASE TRY
AGAIN

POWER DIALING ARMED

2-7 SET TIME & DATE

2-7-1 SET TIME

The RKP screen displays the time and date at all times. The time and date
need to be set at the time of programming the panel. The same time
setting is also used for the Auto Operation feature.

GALAXY

SET TIME & DATE

1-SET TIME
2-SET DATE

POWER DIALING ARMED

18
GALAXY 4016 GSM
Press 1 to set time
The screen will display the current set time:

GALAXY

SET TIME & DATE

SET TIME
HH:MM
09:45

POWER DIALING ARMED

Use numeric keys to enter hours and minutes. Press NEXT to move to
the next digit after entering each digit
To go to the previous digit option press 0
Press ENTER to confirm.

2-7-2 SET DATE

GALAXY

SET TIME & DATE

1-SET TIME
2-SET DATE

POWER DIALING ARMED

Press 2 to set date

The screen will display the current set date:

GALAXY

SET TIME & DATE

SET DATE
DAY DT MNT YEAR
SUN 01 JAN 2017

POWER DIALING ARMED

19
Use PANIC KEY and FULL KEY to set days.
Press NEXT to shift the cursor to the next position.
Use numeric keys to set date.
Use PANIC KEY and FULL KEY to select the month
Use numeric keys to set year.
Press NEXT to shift the cursor to the next position.
Press ENTER to confirm.

2-8 TIMER SETTING

GALAXY

TIMER SETTING

POWER DIALING ARMED

Press ENTER
The screen will display:
GALAXY

TIMER SETTING
1-ENTRY TIME
2-EXIT TIME
3-SOUNDER TIME

POWER DIALING ARMED

ENTRY TIME: The entry time is the time the user has to enter the code
before the alarm sounds when entering from an entry / exit (delay) zone.
This time is programmed by the user and can vary from 2 to 255 seconds.
EXIT TIME: The exit time is the time after arming the system in which any
open entry / exit zones must be closed. This time is programmed by the
user and can vary from 2 to 255 seconds.

20
GALAXY 4016 GSM

SOUNDER TIME: The sounder time is the duration for which the alarm will
sound in case of an alarm. This time is programmed by the user and can
vary from 2 to 20 minutes.

2-8-1 ENTRY TIME

GALAXY

TIMER SETTING
1-ENTRY TIME
2-EXIT TIME
3-SOUNDER TIME

POWER DIALING ARMED

Press 1 for ENTRY TIME

The screen will display:
GALAXY

ENTRY TIME
ENTER 2-255
SECONDS
030

POWER DIALING ARMED

Enter a time between 002 to 255 seconds for ENTRY TIME

Press ENTER to confirm

2-8-2 EXIT TIME

GALAXY

TIMER SETTING
1-ENTRY TIME
2-EXIT TIME
3-SOUNDER TIME

POWER DIALING ARMED

Press 2 for EXIT TIME

21
The screen will display:

GALAXY

EXIT TIME
ENTER 2-255
SECONDS
030

POWER DIALING ARMED

Enter time between 002 to 255 seconds for EXIT TIME

Press ENTER to confirm

2-8-3 SOUNDER TIME

GALAXY

TIMER SETTING
1-ENTRY TIME
2-EXIT TIME
3-SOUNDER TIME

POWER DIALING ARMED

Press 3 for SOUNDER TIME

The screen will display:

GALAXY

SOUNDER TIME
ENTER 2-20
MINUTES
02

POWER DIALING ARMED

Enter time between 02 to 20 minutes for SOUNDER DURATION

Press ENTER to confirm

2-9 AUTO OPERATION

Auto Operation allows the panel to arm and disarm at a preset time Daily
(automatic arming and disarming). There is also a provision for one holiday
in a week when the panel will remain armed. Both automatic arming and

22
GALAXY 4016 GSM
disarming are independent features and can be used separately. This
option can be manually overridden at any time by following standard
arming and disarming procedure.
GALAXY

AUTO OPERATION

POWER DIALING ARMED

Press ENTER
The screen will display: GALAXY

AUTO OPERATION
1-ARMING TIME
2-DISARMING TIME
3-SET HOILDAY

POWER DIALING ARMED

Press 1 for AUTOMATIC ARMING TIME

Press 2 for AUTOMATIC DISARMING TIME
Press 3 for SET HOLIDAY

2-9-1 ARMING TIME

Press 1 to set AUTOMATIC ARMING TIME

The screen will display GALAXY

EDIT ARMING TIME

HH : MM STATUS
00 : 00 DISABLE

POWER DIALING ARMED

Press numeric keys from the key pad to set the desired time in 24 hour
HH:MM format.
(Press NEXT to move to the next digit after entering each digit)
Use FULL and PART keys to toggle between ENABLE and DISABLE. This
will either enable or disable automatic arming.
Press ENTER to confirm
23
2-9-2 DISARMING TIME

GALAXY

AUTO OPERATION
1-ARMING TIME
2-DISARMING TIME
3-SET HOLIDAY

POWER DIALING ARMED

Press 2 to set AUTOMATIC DISARMING

Follow the same procedure as automatic arming to set the disarming
time and enable / disable function.

2-9-3 SET HOLIDAY

GALAXY

AUTO OPERATION
1-ARMING TIME
2-DISARMING TIME
3-SET HOLIDAY

POWER DIALING ARMED

Press 3 to set holiday

The screen will display:
GALAXY

SET HOLIDAY
DAY STATUS
SUNDAY DISABLE

POWER DIALING ARMED

Use FULL and PART keys to change the day

Use the NEXT button to move the cursor to ENABLE / DISABLE.
Use FULL and PART keys to toggle between ENABLE and DISABLE.
Press ENTER to confirm

24
GALAXY 4016 GSM

2-10 TEXT SMS

Remove the jumper and after PRESS Intrusion or Fire switch as

per the listen pre-recorded intrusion or fire voice message.
The GALAXY GSM sends out two types of TEXT SMS: ALARM and
STATUS. Alarm SMS are sent to all numbers where as Status
SMS are sent to the first number of intrusion only.
ALARM SMS:
1. INTRUSION ALARM SMS
2. FIRE ALARM SMS
3. PANIC ALARM SMS
4. WRONG CODE ALARM SMS
5. TAMPER ALARM SMS
STATUS SMS:
1. AC POWER ON SMS
2. AC POWER OFF SMS
3. FULL ARM SMS
4. NIGHT ARM SMS
5. DISARM SMS
6. ADMIN CODE CHANGED SMS
7. USER 1 CODE CHANGED SMS
8. USER 2 CODE CHANGED SMS
9. USER 3 CODE CHANGED SMS
10. BATTERY LOW SMS
11. TELEPHONE NUMBER ADD SMS
12. TELEPHONE NUMBER REMOVE SMS

25
2-11 BUTTONS ON THE KEY PAD

2-11-1 PANIC BUTTON

The remote key pad has an onboard panic alarm activation.

To trigger the panic alarm:
Press ENTER
Press PANIC

2-11-2 FIRE ALARM

The remote key pad has an onboard fire alarm activation.

To trigger the fire alarm:
Press NEXT
Press 3/FIRE

3 - OPERATING PROCEDURE 2 - THROUGH SMS

Control panel can operate remotely through mobile phone.

User can do following operations by sending SMSs:
1. Full Arm the System
2. Disarm the System
3. Change the Admin Code
4. Change Delay Time
5. Change Sounder Time
6. Set Auto Operation
7. Edit Schedule
8. Edit Numbers
9. Edit Name and Address
10. Alarm Reset
11. Sounder Stop
12. Record Voice Message
13. Play Voice Message

26
GALAXY 4016 GSM
3-1 FULL ARM THE SYSTEM

<ADMIN CODE><SPACE><FULL><SPACE>  New message

CONTROL PANEL NUMBER

<ARM><SPACE><END>

Example: 1
1234 FULL ARM END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program full arm the £

123
Z

@
X C

ENTER
V B N M

.
³
8

system.

3-2 DISARM THE SYSTEM

<ADMIN CODE><SPACE><DISARM><SPACE>  New message

CONTROL PANEL NUMBER

<END>

Example: 1
1234 DISARM END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program disarm the £

123
Z

@
X C

ENTER
V B N M

.
³
8

system.

3-3 CHANGE THE ADMIN CODE

<ADMIN CODE><SPACE><CHANGE><SPACE>
<CODE><ENTER><#XXXX-YYYY*><SPACE><END>

XXXX = NEW CODE  New message

CONTROL PANEL NUMBER

YYYY = AGAIN NEW CODE

1234 CHANGE CODE

Example: 1
#5678-5678* END

2 3
†
4 5 6 7 8 9 0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program the admin code £

123
Z

@
X C

ENTER
V B N M

.
³
8

is 5678.

27
3-4 CHANGE DELAY TIME

3-4-1 CHANGE ENTRY TIME

<ADMIN CODE><SPACE><ENTRY><SPACE>
<TIME><SPACE><#XXX*><SPACE><END>  New message
CONTROL PANEL NUMBER

XXX = Time in seconds from 000 to 255

1234 ENTRY TIME
Example: 1
#120* END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program the entry time £

123
Z

@
X C

ENTER
V B N M

.
³
8

to 120 seconds.

3-4-2 CHANGE EXIT TIME

<ADMIN CODE><SPACE><EXIT><SPACE>
<TIME><SPACE><#XXX*><SPACE><END>
 New message
CONTROL PANEL NUMBER

XXX = Time in seconds from 000 to 255

1234 EXIT TIME
Example: 1
#035* END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program the exit time to £

123
Z

@
X C

ENTER
V B N M

.
³
8

35 seconds.

3-5 CHANGE SOUNDER TIME

<ADMIN CODE><SPACE><SOUNDER><SPACE>
<TIME><SPACE><#XX*><SPACE><END>
 New message
CONTROL PANEL NUMBER

XX = Time in minutes (02-20 minutes)

1234 SOUNDER TIME
Example: 1
#04* END
2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program the sounder £

123
Z

@
X C

ENTER
V B N M

.
³
8

time to 04 minutes.

28
GALAXY 4016 GSM
3-6 SET AUTO OPERATION

3-6-1 SET AUTOMATIC ARMING

<ADMIN CODE><SPACE><AUTO><SPACE>
<ARM><SPACE><#HH:MM*><SPACE><XXX>
<SPACE><END>

HH:MM = Time in HH:MM (24 hour format)

XXX = ENA FOR ENABLE  New message
CONTROL PANEL NUMBER

DIS FOR DISABLE

1234 AUTO ARM
Example: 1
#22:30* ENA END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program the automatic £

123
Z

@
X C

ENTER
V B N M

.
³
8

arming enable time 22:30 (10:30 pm).

3-6-2 SET AUTOMATIC DISARMING

<ADMIN CODE><SPACE><AUTO><SPACE>
<DISARM><SPACE><#HH:MM*><SPACE>
<XXX><SPACE><END>

HH:MM = Time in HH:MM (24 hour format)

XXX = ENA FOR ENABLE  New message
CONTROL PANEL NUMBER

DIS FOR DISABLE

1234 AUTO DISARM

Example: 1
#06:30* ENA END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to program the automatic £

123
Z

@
X C

ENTER
V B N M

.
³
8

disarming enable time 06:30.

29
3-6-3 SET HOLIDAY

<ADMIN CODE><SPACE><SET><SPACE>
<HOLIDAY><SPACE><#XXX*><SPACE><YYY>
<SPACE><END>

XXX = SUN, MON, TUE, WED, THU, FRI AND SAT

YYY = ENA FOR ENABLE  New message
CONTROL PANEL NUMBER

DIS FOR DISABLE

Example: 1234 SET HOILDAY
#MON* ENA END
†
1 2 3 4 5 6 7 8 9 0

Refer to the illustration of the mobile phone screen Q

A
W

S
E

D
R

F
T

G
Y

H
U

J
I

K
O

I
P

for sample text message to enable on Monday as a £ Z X C V B N M ³

123 @ ENTER .
8
holiday.

3-7 EDIT SCHEDULE

<ADMIN CODE><SPACE><SCHEDULE>
<SPACE><CHANGE><#XX-SS:TT,HH:MM,A,B*>
<SPACE><END>
XX = ZONE NO
SS:TT = Start time in HH:MM (24 hour format)
HH:MM = End time in HH:MM (24 hour format)
A = Sounder Enable / Disable
N = Sounder Enable
Y = Sounder Disable
B = Schedule Enable / Disable
N = Schedule Enable
 New message

Y = Schedule Disable
CONTROL PANEL NUMBER

Example: 1234 SCHEDULE

CHANGE #05-16:30,
Refer to the illustration of the mobile phone screen 1
18:00,Y,Y* END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

for sample text message to enable schedule zone no A S D F G H J K I

5 start from16:30 (04:30 pm) to 18:00 (06:00 pm) £

123
Z

@
X C

ENTER
V B N M

.
³
8

with enable sounder.

30
GALAXY 4016 GSM
3-8 EDIT NUMBERS

3-8-1 EDIT INTRUSION NUMBERS

<ADMIN CODE><SPACE><TEL><SPACE>
<NO><SPACE><INTRUSION><SPACE><#YY-
XXXXXXXXXX*><SPACE><END>

YY = Phone no. location (01, 02, 03…….10)  New message

CONTROL PANEL NUMBER

XXXXXXXXXX = 10 digits mobile number.

1234 TEL NO
INTRUSION
Example: 1
#04-9999999999* END †
2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to add 1 telephone number £

123
Z

@
X C

ENTER
V B N M

.
³
8

in location number 4 for intrusion.

REMOVE ONE SAVED TELEPHONE NUMBER IN INTRUSION

This option is used to remove one saved telephone number in
intrusion.

<ADMIN CODE><SPACE><TEL><SPACE>
<NO><SPACE><INTRUSION><#XX-REMOVE*>
<SPACE><END>
 New message
CONTROL PANEL NUMBER

XX = Phone no. location (01, 02, 03…….10)

1234 TEL NO
INTRUSION
Example: 1
#06-REMOVE* END
2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to remove 1 telephone £

123
Z

@
X C

ENTER
V B N M

.
³
8

number in location number 6 for intrusion.

31
REMOVE ALL SAVED TELEPHONE NUMBER IN INTRUSION
This option is used to remove all saved telephone number in
intrusion.
 New message
<ADMIN CODE><SPACE><INTRU><SPACE> CONTROL PANEL NUMBER

<CLEAR><SPACE><END>
1234 INTRU CLEAR
Example: 1
END
2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to remove all saved number £

123
Z

@
X C

ENTER
V B N M

.
³
8

in intrusion.

3-8-2 EDIT FIRE NUMBERS

<ADMIN CODE><SPACE><TEL><SPACE>
<NO><SPACE><FIRE><SPACE><#YY-
XXXXXXXXXX*><SPACE><END>
 New message
YY = Phone no. location (01, 02, 03…….10) CONTROL PANEL NUMBER

XXXXXXXXXX = 10 digits mobile number.

1234 TEL NO FIRE
Example: 1
#03-9999999999* END †
2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to add 1 telephone number £

123
Z

@
X C

ENTER
V B N M

.
³
8

in location number 3 for fire.

REMOVE ONE SAVED TELEPHONE NUMBER OF FIRE

<ADMIN CODE><SPACE><TEL><SPACE>
<NO><SPACE><FIRE><#XX-REMOVE*>
<SPACE><END>  New message
CONTROL PANEL NUMBER

XX = Phone no. location (01, 02, 03…….10)

Example: 1234 TEL NO FIRE

#05-REMOVE* END †

Refer to the illustration of the mobile phone screen

1 2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P

A S D F G H J K I

for sample text message to remove 1 telephone £ Z X C V B N M ³

123 @ ENTER .
8
number in location number 5 for fire.
32
GALAXY 4016 GSM
REMOVE ALL SAVED TELEPHONE NUMBER IN FIRE
This option is used to remove all saved telephone number in fire.

<ADMIN CODE><SPACE><FIRE><SPACE>  New message

CONTROL PANEL NUMBER

<CLEAR><SPACE><END>

1234 FIRE CLEAR

Example: 1
END
2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message to remove all saved number £

123
Z

@
X C

ENTER
V B N M

.
³
8

in fire.

3-9 EDIT NAME AND ADDRESS

The user can set a signature be incorporated in all SMS sent by

the panel.
<ADMIN CODE><SPACE><NAME><SPACE>
<ADDRESS><SPACE><#TEXT*><SPACE><END>
 New message
CONTROL PANEL NUMBER

TEXT: MAXIMUM 40 CHARACTER

Example: 1234 NAME ADDRESS
#SECURICO

Refer to the illustration of the mobile phone screen 1

ELECTRONICS* END †
2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P

for sample text message to set a address (securico A S D F G H J K I

£ Z X C V B N M ³
electronics) be incorporated in all SMS sent by the 123 @ ENTER .
8

panel.

3-10 ALARM RESET

This message is to used to stop the sounder, sms

and dialing  New message
CONTROL PANEL NUMBER

<ADMIN CODE><SPACE><ALARM><SPACE>
<RESET><SPACE><END> 1234 ALARM RESET
END †
1 2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P

Example: A S D F G H J K I

£
Refer to the illustration of the mobile phone screen ³
Z X C V B N M

123 @ ENTER .
8

for sample text message for alarm reset command.

33
3-11 SOUNDER STOP

This message is to used only to stop the sounders

only in case of an alarm.  New message
CONTROL PANEL NUMBER

<ADMIN CODE><SPACE><SOUNDER>
<SPACE><OFF><SPACE><END> 1234 SOUNDER OFF
END †
1 2 3 4 5 6 7 8 9 0
Q W E R T Y U I O P

Example: A S D F G H J K I

£
Refer to the illustration of the mobile phone screen ³
Z X C V B N M

123 @ ENTER .
8

for sample text message for sounder off command.

3-12 RECORD VOICE MESSAGE

This function allows the user to record or re-record the intrusion or

fire voice messages. In case of an intrusion or fire, the control panel
starts dialing programmed telephone numbers to transmit
prerecorded voice messages after sending SMS text messages.

3-12-1 RECORD INTRUSION VOICE MESSAGE

This function allows the user to record or re-

record the intrusion voice message.

<ADMIN CODE><SPACE><RECO><SPACE>  New message

CONTROL PANEL NUMBER

<INT><SPACE><MSG><SPACE><END>
1234 RECO INT MSG
Example: 1
END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message for record intrusion voice £ Z X C V B N M ³

123 @ ENTER .
8

message command.

34
GALAXY 4016 GSM
3-12-2 RECORD FIRE VOICE MESSAGE

This function allows the user to record or re-

record the fire voice message.

<ADMIN CODE><SPACE><RECO><SPACE>  New message

CONTROL PANEL NUMBER

<FIRE><SPACE><MSG><SPACE><END>
1234 RECO FIRE MSG
Example: 1
END

2 3
†
4 5 6 7 8 9 0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message for record fire voice £ Z X C V B N M ³

123 @ ENTER .
8

message command.

3-13 PLAY VOICE MESSAGE

This function allows the user to listen to recorded intrusion and

fire voice messages.

3-13-1 PLAY INTRUSION VOICE MESSAGE

This function allows the user to listen to the recorded intrusion

voice messages.

<ADMIN CODE><SPACE><PLAY><SPACE>  New message

CONTROL PANEL NUMBER

<INT><SPACE><MSG><SPACE><END>
1234 PLAY INT MSG
Example: 1
END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message for play intrusion voice £ Z X C V B N M ³

123 @ ENTER .
8

message command.

35
3-13-2 PLAY FIRE VOICE MESSAGE

This function allows the user to listen to the recorded fire voice
message.

<ADMIN CODE><SPACE><PLAY><SPACE>  New message

CONTROL PANEL NUMBER

<FIRE><SPACE><MSG><SPACE><END>
1234 PLAY FIRE MSG
Example: 1
END

2 3 4 5 6 7 8 9
†
0
Q W E R T Y U I O P

Refer to the illustration of the mobile phone screen A S D F G H J K I

for sample text message for play fire voice message £

123
Z

@
X C

ENTER
V B N M

.
³
8

command.

4 - OPERATING PROCEDURE 3 - THROUGH MOBILE APP

Please refer to the app user guide in the android application.

5 - OTHER USEFUL INFORMATION

5-1 FORGOTTEN CODE

If the user has FORGOTTEN the ADMIN CODE, the panel has to be
reset to FACTORY SETTINGS.

To reset to factory settings:

Disconnect mains power supply and the battery from the main
control panel.
Re-connect the power supply.
The remote key pad screen will display:
GALAXY

1- PREVIOUS
SETTING
2- FACTORY
SETTING

POWER DIALING ARMED

36
GALAXY 4016 GSM
Press 2
The panel will reset to factory settings and the ADMIN CODE will be
reset to 1234.
Note: The programmed messages and telephone numbers stored in
the panel will not be erased when the panel is reset to factory settings.

5-2 KEY PAD AND LCD LIGHTING

In order to make it easier to operate the control panel, both the key pad
buttons and the LCD screen are fully backlit. The keypad and LCD screen
will illuminate if a button is pressed or any delay zone is opened. The lights
switch off automatically after one minute.

5-3 SAFETY FUSES

As an additional safety feature, the control panel has one mains AC fuse
on the power supply card and two safety fuses on the battery charging
board. In the event of an overload in the power supply, sounder or auxiliary
supply circuits, a fuse will blow. This fuse must be replaced.

5-5 RETRIEVAL OF PREVIOUS SETTINGS

The control panel has a unique optional feature of retrieving the previous
settings in case of complete power failure. In case of complete power
failure (AC and battery), when the system restarts, an option to retrieve
previous settings or to reset to factory settings is given.
Following information is retrieved in this case:
1. Arm or Disarm status
2. Admin Code
3. Entry, Exit and Sounder time
4. Automatic Arming Time
5. Holiday setting
6. Intrusion Log

37
5-6 UNIQUE BYPASS FEATURE OF 24 HOUR ACTIVE ZONE

GALAXY

BYPASS PANIC FIRE TAMPER

POWER DIALING ARMED

In case any 24 hour is triggered (FIRE, PANIC, TAMPER) as soon as

the sounder stops (either manually or after pre set sounder time)
the panel will scan all open zones. If the panel found any 24 hour or
any other zone open at that time, it will temporary bypass that
zone. If the zone is a 24 hour active zone, the display on the LCD
screen will show BYPASS PANIC or BYPASS FIRE or BYPASS
TAMPER zone. User can use the system for arming and disarming till
the service engineer comes to rectify the problem (in case if any 24
hour active zone or immediate zone wire has cut).
After rectifying the problem, the system will exit from the BYPASS
PANIC
FIRE TAMPER on following the below steps :
Press ENTER
Press EXIT

38
GALAXY 4016 GSM
6 - TECHNICAL SPECIFICATIONS

ELECTRICAL
REMOTE KEY PAD ONLY
Quiescent current : 30 mA Max.
Quiescent current with backlit LCD : 90 mA Max.

MAIN CONTROL STATION WITH ONE REMOTE KEY PAD

Quiescent current : 100 mA
Quiescent current with backlit LCD : 360 mA
Current with dialing : 530 mA Max.
Maximum sounder 1 current output : 1 A
Maximum sounder 2 current output : 1 A
Remote key pads : Up to three
Non-volatile Memory : Programming and Log
Zone response time : <500ms
Zone Loop Resistance : <5k ohm for NORMALLY CLOSED

POWER SUPPLY
Mains supply Voltage : 220+10%-15% 50Hz
Total current Output : 2A at 220V AC or 4A at 220V AC
Battery Voltage : 12V DC
Battery type : SMF Rechargeable
Battery Recharge Voltage : 13.8V +/-0.2V DC

ENVIRONMENTAL
ELECTRICAL
REMOTE KEY PAD ONLY
Quiescent current : 30 mA Max.
Quiescent current with backlit LCD : 90 mA Max.

39
6 - TECHNICAL SPECIFICATIONS

MAIN CONTROL STATION WITH ONE REMOTE KEY PAD

Quiescent current : 100 mA
Quiescent current with backlit LCD : 360 mA
Current with dialing : 530 mA Max.
Maximum sounder 1 current output : 1 A
Maximum sounder 2 current output : 1 A
Remote key pads : Up to three
Non-volatile Memory : Programming and Log
Zone response time : <500ms
Zone Loop Resistance : <5k ohm for NORMALLY CLOSED

POWER SUPPLY
Mains supply Voltage : 220+10%-15% 50Hz
Total current Output : 2A at 220V AC or 4A at 220V AC
Battery Voltage : 12V DC
Battery type : SMF Rechargeable
Battery Recharge Voltage : 13.8V +/-0.2V DC

ENVIRONMENTAL
Operating Temperature : 0C to 45C
Storage Temperature : -20C to 60C

PHYSICAL
REMOTE KEY PAD
Dimensions : 310mm x 315mm x 100mm
MAIN CONTROL STATION
Dimensions : 258mm x 230mm x 76mm
Max Battery Dimensions : 150mm x 110mm x 64mm

40
GALAXY 4016 GSM

GSM
GSM Frequency : Dual Band 900MHz / 1800 MHZ

Safety Precaution:
Your cellular device receives and transmits radio frequency energy while
switched on and while making receiving calls. Remember that interference
can occur if it is used close to TV sets, radio, computers or inadequately
shielded equipment.

IMPORTANT!
Cellular devices using radio signals and cellular networks. Because of this,
connection cannot be guaranteed at all times under all conditions.
Remember, in order to make or receive calls, the cellular device must be
switched on and in a service area with adequate cellular signal strength.

41
 TAMPER
SWITCH
ZONE CARD - 33 to 40 ZONE CARD - 25 to 32 ZONE CARD ZONE CARD - 9 to 16
- 17 to 24

LED CUM MFD

7 - CONNECTION DIAGRAM

LL

ZONE CARD - 1 to 8
BATTERY
CHARGING
BOARD MCU CARD
BATTERY MIC
SPEAKER

SOUNDER

ANTENNA
RELAY CARD

AC 220V
GSM CARD
REMOTE KEY PAD
SMPS CARD

42
 Integrated Intruder Alarm Fire Alarm
Security Systems Systems Systems

(
GSM & PSTN Monitoring CCTV
Dialers Services Surveillance

Securico Electronics India Limited

Securico House, Plot No. 4, 14/3, Delhi-Mathura Road,
Faridabad-121003, Haryana, India
Tel.:+91-129-4270000 | Email: [email protected]

w w w. s e c u r i c o e l e c t r o n i c s . c o m