Scribd
Upload
157 views5 pages

Slab-Design-2 Way - IS

1) The document provides design calculations for a two-way reinforced concrete slab with simply supported edges. 2) The slab has a clear span of 5m x 6m and is 250mm thick with 10mm diameter bars spaced at 180-250mm. 3) The calculations check that the slab design satisfies requirements for strength, serviceability, and shear capacity according to Indian code IS 456.

Uploaded by

Kamran Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
157 views5 pages

Slab-Design-2 Way - IS

1) The document provides design calculations for a two-way reinforced concrete slab with simply supported edges. 2) The slab has a clear span of 5m x 6m and is 250mm thick with 10mm diameter bars spaced at 180-250mm. 3) The calculations check that the slab design satisfies requirements for strength, serviceability, and shear capacity according to Indian code IS 456.

Uploaded by

Kamran Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

PROJECT : JOB NO.: PAGE No.

CLIENT:

REV. NO.: BY:


SUBJECT:
DATE : CH. BY :

INPUT DATA:- Reference's /


Clear Span Lx = 5.00 M Width of support Lx= 0.30 M check
Clear Span Ly = 6.00 M Width of support Ly= 0.30 M
Clear Cover = 25 mm Dia of Bar (Short Dir ) = 10 mm
fck = 25 N/mm2 Dia of Bar ( Long Dir ) = 10 mm
fcy = 415 N/mm2 Edge condition = Case7
Other Dead Load = 0.0 KN/m2 Three Edges Discontinuous (One Long Edge
Live load LL = 5.0 KN/m2 Continuous)

Simply Supported l/d = 26


Thk. of slab provided "D" = 250 mm > 180 mm Req. Depth hence O.K.

ANALYSIS:
Short span Lx = 5.30 M SPAN VALUES ARE OK
Long span Ly = 6.30 M Aspect ratio Ly/Lx = 1.2 Two Way Slab IS-456-Cl. D-1.11
deff of slab (Short Dir) = 220 mm deff of slab (Long Dir) = 210 mm

Self weight = 6.25 KN/m2


Total load = 11.3 KN/m2 Wu x Lx2 = 474.02 KN m IS-456-Cl. D-1.1

Design moments :

Ast
Coff. From Table Mu Mu/bd2 Ast Pro.
pt Req. Dia Spc Pro. Cm2 S Rqrd
pt Pro. CHECK
26 IS 456 Cm2

Support
0.070 33.28 0.69 0.197 4.33 10 180 c/c = 4.36 181 0.198 OK ###
(-ve)
Short
Mid span
0.052 24.85 0.51 0.146 3.21 10 240 c/c = 3.27 245 0.149 OK ###
(+ve)
Support
0.000 0.00 0.00 0.000 1.37 10 250 c/c = 3.14 250 0.150 OK ###
(-ve)
Long
Mid span
0.043 20.38 0.46 0.131 2.75 10 250 c/c = 3.14 250 0.150 OK ###
(+ve)

Check for deflection : Cl-23.2.1


Pt,x = 0.149 fs = 236.1 N/mm2 fs Taken = 240
Modification Factor = M.F. = 1.88 Thickness of slab required "D" = 180.0 mm Modification Factor = M.F. =
(l/d)pro. = 24.09 < 49.0 = (l/d)max SAFE in Deflection IS 456-2000 - Fig. 3

Check for shear :


Vu= Wu(0.5lxn-d) = 11.25* ( 0.5* 5.3 - 0.22 ) = 27.34 Kn/m
tv = 27.3375 * 10^3 / ( 1000 * 220 ) = 0.12 N/mm2
tc = for pt 0.149 tc will be = 0.36 N/mm2
K = 1.10
k*tc = 0.40 > 0.12 = tv Hence, SAFE IN SHEAR Cl. 40.2.1.1
650 mm 1600 mm

10 @ 180 C/C
550 mm
10 @ 250 C/C

10 @ 250 C/C

10 @ 250 C/C

lx = 5.30 M
10 @ 240 C/C

1350 mm 10 @ 180 C/C

ly= 6.30 M
Short Span Cofficients a a
Case Type of Panel and Moments
No. Considered
(Values Ly/Lx)
1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9
Case1 Interior Panels
1 Negative Moment at Continuous Edge 0.032 0.037 0.043 0.047 0.051 0.053 0.055 0.058 0.060 0.063
2 Positive Moments at mid span 0.024 0.028 0.032 0.036 0.039 0.041 0.043 0.044 0.046 0.047

Case2 One Short Edge Discontinuous


1 Negative Moment at Continuous Edge 0.037 0.043 0.048 0.051 0.055 0.057 0.059 0.061 0.064 0.066
2 Positive Moments at mid span 0.028 0.032 0.036 0.039 0.041 0.044 0.046 0.047 0.049 0.050

Case3 One Long Edge Discontinuous


1 Negative Moment at Continuous Edge 0.037 0.044 0.052 0.057 0.063 0.067 0.071 0.074 0.078 0.082
2 Positive Moments at mid span 0.028 0.033 0.039 0.044 0.047 0.051 0.054 0.057 0.059 0.062

Case4 Two Adjacent Edges Discontinuous


1 Negative Moment at Continuous Edge 0.047 0.053 0.060 0.065 0.071 0.075 0.078 0.081 0.085 0.088
2 Positive Moments at mid span 0.035 0.040 0.045 0.049 0.053 0.056 0.059 0.061 0.064 0.066

Case5 Two Short Edges Discontinuous


1 Negative Moment at Continuous Edge 0.045 0.049 0.052 0.056 0.059 0.060 0.062 0.064 0.065 0.067
2 Positive Moments at mid span 0.035 0.037 0.040 0.043 0.044 0.045 0.046 0.048 0.049 0.051

Case6 Two Long Edges Discontinuous


1 Negative Moment at Continuous Edge 0 0 0 0 0 0 0 0 0 0
2 Positive Moments at mid span 0.035 0.043 0.051 0.057 0.063 0.068 0.072 0.076 0.080 0.084

Case7 Three Edges Discontinuous (One Long Edge Continuous)


1 Negative Moment at Continuous Edge 0.057 0.064 0.071 0.076 0.080 0.084 0.087 0.089 0.092 0.094
2 Positive Moments at mid span 0.043 0.048 0.053 0.057 0.060 0.064 0.066 0.068 0.069 0.071

Case8 Three Edges Discontinuous (One Short Edge Continuous)


1 Negative Moment at Continuous Edge 0 0 0 0 0 0 0 0 0 0
2 Positive Moments at mid span 0.043 0.051 0.059 0.065 0.071 0.076 0.080 0.084 0.088 0.092

Case9 Four Edges Discontinuous


1 0 0 0 0 0 0 0 0 0 0
2 Positive Moments at mid span 0.056 0.064 0.072 0.079 0.085 0.089 0.093 0.096 0.100 0.104
Long Span
Short Span Cofficients a a Cofficients a
y

(All Values
(Values Ly/Lx) Ly/Lx)
2

0.065 0.032
0.049 0.024

0.068 0.037
0.052 0.028

0.085 0.037
0.065 0.028

0.091 0.047
0.069 0.035

0.069 0.000
0.052 0.035

0 0.045
0.088 0.035

0.097 0.000
0.073 0.043

0 0.057
0.096 0.043

0 0.000
0.107 0.056

You might also like