0% found this document useful (0 votes)
4K views1 page

BIOS Setup Acer Packard Bell: Ctrl+Alt+Esc Key and The F1 Key For Advanced

This document provides information on accessing the BIOS setup for various computer manufacturers and models. For most manufacturers, pressing keys like F1, F2, Del, or Esc immediately after turning the computer on will open the BIOS setup utility. Some older models may use alternative key combinations like Ctrl+Alt+F3 or Fn+F1. The specific key combination varies between manufacturers and sometimes between different models from the same manufacturer.

Uploaded by

lorkoe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
4K views1 page

BIOS Setup Acer Packard Bell: Ctrl+Alt+Esc Key and The F1 Key For Advanced

This document provides information on accessing the BIOS setup for various computer manufacturers and models. For most manufacturers, pressing keys like F1, F2, Del, or Esc immediately after turning the computer on will open the BIOS setup utility. Some older models may use alternative key combinations like Ctrl+Alt+F3 or Fn+F1. The specific key combination varies between manufacturers and sometimes between different models from the same manufacturer.

Uploaded by

lorkoe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

BIOS Setup

Acer DX, FX, One, GM, GT, GX, Profile, Astro Packard Bell
Apire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos 8900 Series, 9000 Series, Pulsar, Platinum, EasyNote, imedia,
 Press Del or F2 immediately after powering on.  Press the F1 key repeatedly after restarting the
iextreme
 The Acer Veriton L480G uses F12. computer.
 The BIOS on the Acer Altos 600 server uses the  Some older Gateway computers use F2 to access the  Press F1, F2, or Del to enter BIOS.
Ctrl+Alt+Esc key and the F1 key for advanced BIOS Setup utility.
options.
Samsung
 Older Acer computers may use also use the F1 or Hewlett-Packard (HP) Series 'x' laptops
Ctrl+Alt+Esc keys to access BIOS.
Pavilion, TouchSmart, Vectra, OmniBook, Tablet

Compaq
 Press F2 to start the BIOS setup utility.
Presario, Prolinea, Deskpro, Systempro, Portable  Press the F1, F10, or F11 key after restarting the
computer.
Sharp
 HP Tablet PCs may use F10 or F12. Notebook Laptops, Actius UltraLite
 Press F10 while the cursor in the top right corner of the  Other HP computers may allow access to BIOS using
screen is blinking. the F2 or Esc keys.
 Older Compaq computers may use the F1, F2, F10, or  Press F2 after the computer starts.
Del key to give access to BIOS.  Some very old Sharp PCs require a Setup Diagnostics
IBM Disk to access BIOS.
PC, XT, AT
Dell
XPS, Dimension, Inspiron, Latitude. OptiPlex, Precision, Vostro Shuttle
 Press F1 immediately after powering on the computer. Glamor G-Series, D'vo, Prima P2-Series, Workstation, X Mini
 Older IBM computers (including some laptops) may XPC, Surveillance
 Press F2 when the Dell logo appears. Press every few utilize the F2 key for BIOS entry.
seconds until the message Entering Setup appears.
 Older Dell desktops and laptops may instead use  Press F2 or Del on startup.
Ctrl+Alt+Enter or Del to enter BIOS. Lenovo (formerly IBM)
ThinkPad, IdeaPad, 3000 Series, ThinkCentre, ThinkStation
 Older Dell laptops may use Fn+Esc or Fn+F1. Sony
VAIO, PCG-Series, VGN-Series
eMachines  Press F1 or F2 after powering on the computer.
eMonster, eTower, eOne, S-Series, T-Series  Older Lenovo products allow access to BIOS using
 Press F1, F2 or F3 after turning on the computer.
Ctrl+Alt+F3, Ctrl+Alt+Ins, or Fn+F1.

 Press Tab or Del while the eMachine logo displays on Toshiba


screen. Micron (MPC Computers) Portégé, Satellite, Tecra, Equium
ClientPro, TransPort
 Other eMachine computers may use F2 to enter BIOS.

 Press F1 or Esc after powering on to access BIOS.


 Press F1, F2 or Del immediately after powering on the
Fujitsu
PC.  Press F12 on a Toshiba Equium.
LifeBook, Esprimo, Amilo, Tablet, DeskPower

NEC
 Press F2 once the Fujitsu logo appears.
PowerMate, Versa, W-Series

Gateway
 Press F2 to enter the BIOS Setup.

You might also like