Simulation of run
both flows
Date: Wednesday, 15 May 2019
Designer: Solidworks
Study name: Thermal 1
Analysis type: Thermal(Steady state)
Table of Contents
Description ............................................ 1
Assumptions .......................................... 2
Model Information ................................... 2
Study Properties ..................................... 3
Units ................................................... 3
Material Properties .................................. 4
Description Thermal Loads........................................ 4
No Data Contact Information ................................. 4
Mesh information .................................... 5
Sensor Details ........................................ 5
Study Results ......................................... 5
Conclusion ............................................ 5
Analyzed with SOLIDWORKS Simulation Simulation of run both flows 1
Assumptions
Model Information
Model name: run both flows
Current Configuration: Default
Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Mass:0.0671254 kg
C:\Users\ROQUE\AppData\
Volume:0.0671254 m^3
drier v2.step Local\Temp\swx13452\IC
Solid Body Density:1 kg/m^3
~~\cap.step.SLDPRT
Weight:0.657829 N
May 15 14:52:23 2019
Mass:6201.62 kg
C:\Users\ROQUE\AppData\
Volume:0.79508 m^3
drier v2.step Local\Temp\swx13452\IC
Solid Body Density:7800 kg/m^3
~~\casing.step.SLDPRT
Weight:60775.9 N
May 15 14:52:23 2019
Mass:1374.22 kg C:\Users\ROQUE\AppData\
Volume:0.176182 m^3 Local\Temp\swx13452\IC
drier v2.step
Solid Body Density:7800 kg/m^3 ~~\grain
Weight:13467.4 N mesh.step.SLDPRT
May 15 14:52:23 2019
Analyzed with SOLIDWORKS Simulation Simulation of run both flows 2
Mass:582.607 kg C:\Users\ROQUE\AppData\
Volume:0.0798092 m^3 Local\Temp\swx13452\IC
drier v2.step
Solid Body Density:7300 kg/m^3 ~~\middle
Weight:5709.55 N mesh.step.SLDPRT
May 15 14:52:23 2019
Mass:446.53 kg
C:\Users\ROQUE\AppData\
Volume:0.0572474 m^3
drier v2.step Local\Temp\swx13452\IC
Solid Body Density:7800 kg/m^3
~~\top cap.step.SLDPRT
Weight:4375.99 N
May 15 14:52:23 2019
Study Properties
Study name Thermal 1
Analysis type Thermal(Steady state)
Mesh type Solid Mesh
Solver type FFEPlus
Solution type Steady state
Contact resistance defined? No
Result folder SOLIDWORKS document
(C:\Users\ROQUE\Desktop\New folder (2))
Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Analyzed with SOLIDWORKS Simulation Simulation of run both flows 3
Material Properties
Model Reference Properties Components
Name: Plain Carbon Steel SolidBody 1(drier
Model type: Linear Elastic Isotropic v2.step)(drier v2.step-
Default failure Unknown 1/casing.step-1),
criterion: SolidBody 1(drier
Thermal 43 W/(m.K) v2.step)(drier v2.step-
conductivity: 1/grain mesh.step-1),
Specific heat: 440 J/(kg.K) SolidBody 1(drier
Mass density: 7800 kg/m^3 v2.step)(drier v2.step-1/top
cap.step-1)
Curve Data:N/A
Name: Cast Alloy Steel SolidBody 1(drier
Model type: Linear Elastic Isotropic v2.step)(drier v2.step-
Default failure Unknown 1/middle mesh.step-1)
criterion:
Thermal 38 W/(m.K)
conductivity:
Specific heat: 440 J/(kg.K)
Mass density: 7300 kg/m^3
Curve Data:N/A
Thermal Loads
No Data
Contact Information
Contact Contact Image Contact Properties
Type: Bonded
Components: 1 component(s)
Options: Compatible
mesh
Global Contact
Analyzed with SOLIDWORKS Simulation Simulation of run both flows 4
Mesh information
No Data
Sensor Details
No Data
Study Results
No Data
Conclusion
Analyzed with SOLIDWORKS Simulation Simulation of run both flows 5
