The primary difference between the Model tab and the Layout tab(s) is that the Model tab is where you create the drawing and a Layout tab represents the sheet that you will plot or print on.
To print the entire project, you will choose to regulate what to plot by selecting "Limits".
The difference between the Scale command from the command Zoom is that Scale changes the size of objects, while the Zoom changes the visibility of the project.
Objects are rotated around the base point.
Fillet command can be used to obtain round corners.
A polar array creates new objects in a circular pattern.
The primary difference between the Model tab and the Layout tab(s) is that the Model tab is where you create the drawing and a Layout tab represents the sheet that you will plot or print on.
To print the entire project, you will choose to regulate what to plot by selecting "Limits".
The difference between the Scale command from the command Zoom is that Scale changes the size of objects, while the Zoom changes the visibility of the project.
Objects are rotated around the base point.
Fillet command can be used to obtain round corners.
A polar array creates new objects in a circular pattern.
The primary difference between the Model tab and the Layout tab(s) is that the Model tab is where you create the drawing and a Layout tab represents the sheet that you will plot or print on.
To print the entire project, you will choose to regulate what to plot by selecting "Limits".
The difference between the Scale command from the command Zoom is that Scale changes the size of objects, while the Zoom changes the visibility of the project.
Objects are rotated around the base point.
Fillet command can be used to obtain round corners.
A polar array creates new objects in a circular pattern.
The primary difference between the Model tab and the Layout tab(s) is that the Model tab is where you create the drawing and a Layout tab represents the sheet that you will plot or print on.
To print the entire project, you will choose to regulate what to plot by selecting "Limits".
The difference between the Scale command from the command Zoom is that Scale changes the size of objects, while the Zoom changes the visibility of the project.
Objects are rotated around the base point.
Fillet command can be used to obtain round corners.
A polar array creates new objects in a circular pattern.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 4
The primary difference between the Model tab and the Layout tab(s) is ____.
A. the Model tab is used for drawing in 3D and a Layout is used for drawing in 2D B. the Model tab is where you create the drawing and a Layout tab represents the sheet that you will plot or print on C. the color of the background D. the Model tab displays the drawing you are copying from and the Layout tab is where you lay out the new drawing
To print the entire project, you will choose to regulate what to plot A. Display B. Extends C. Limits D. Window
What is the difference between the Scale command from the command Zoom A. Scale for single object, while the Zoom whole plan B. No difference C. Scale can grow / shrink a shape up 10 times, while the Zoom has no limits D. Scale changes the size of objects, while the Zoom changes the visibility of the project
What you cannot create from the command Offset
A. Vertical straight B. Concentric circles C. Three parallel lines D. Parallel arcs When should I use the Block Editor A. To write text block B. To fix outer block C. To fix dynamic block D. To store it in another version of AutoCAD
What does the command Wblock
A. Warp-speed block B. Write block C. Window block D. Wide-area block
Objects are rotated around the
A. Bottom of the object B. Base point C. Center of the object D. Origin
How would you select set of objects in a drawing?
A. By a crossing window drawn from right to left B. By a crossing window drawn left to right C. Shift+ clicking on the objects D. None of the above
Fillet command can be used to obtain_________
A. Sharp corners B. Round corners C. Both of the above D. None of the above
A polar array creates new objects____
A. In a grid pattern B. In a circular pattern C. In a straight line D. All of the above
How many layers a drawing should have?
A. 1 B. 2 C. As many as depending on the complexity D. None of the above
One of the below options is wrong about the type of Autocad drawing units. Which one is it? o A. Architectural o B. Engineering o C. Millimeter o D. Decimal
By selecting which one of the following, the objects on the layer are not visible and are not considered when the drawing is regenerated? Discuss o A. When you off the layer o B. When you froze the layer o C. When you lock the layer o D. None
The following are some of the properties and settings that you can save in a layout, except _____________. o A. Plot scale o B. Paper size o C. Line weight o D. Drawing orientation When using the TRIM command, which do you select first? a. The cutting edges b. The object to be trimmed c. Everything d. Nothing
The term use by most CAD systems for “rounding corners” is
a. Chamfer b. Curve c. Fillet d. Smooth
The fillet command creates
a. Sharp corners b. Round corners c. Angled corners d. Smooth corners
Which of the following is incorrect statement?
a. Chamfer command is used to bevel the edges b. Fillet command is used to round the corners c. Array command is used to draw multiple copies d. Scale command is used to draw plain scales
