Scribd Logo
Upload

Welcome to Scribd!

  • 96 views

    Assignment For Autocad

    Uploaded by

    amit bhagure
    This document contains assignments from the Department of Mechanical Engineering at the K. K. Wagh Institute of Engineering Education and Research. It includes 6 assignments involving topics like drawing projections of geometric solids such as pyramids, prisms, and cones in different orientations, developing surfaces of solids, drawing curves like ellipses and parabolas, and producing orthographic views from given figures. The assignments cover concepts in engineering drawing and focus on applying principles of projection and developing surfaces of objects.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Assignment For Autocad

    Uploaded by

    amit bhagure
    96 views10 pages
    This document contains assignments from the Department of Mechanical Engineering at the K. K. Wagh Institute of Engineering Education and Research. It includes 6 assignments involving topics like drawing projections of geometric solids such as pyramids, prisms, and cones in different orientations, developing surfaces of solids, drawing curves like ellipses and parabolas, and producing orthographic views from given figures. The assignments cover concepts in engineering drawing and focus on applying principles of projection and developing surfaces of objects.

    Original Description:

    Engineering graphics

    Original Title

    Assignment for Autocad

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains assignments from the Department of Mechanical Engineering at the K. K. Wagh Institute of Engineering Education and Research. It includes 6 assignments involving topics like drawing projections of geometric solids such as pyramids, prisms, and cones in different orientations, developing surfaces of solids, drawing curves like ellipses and parabolas, and producing orthographic views from given figures. The assignments cover concepts in engineering drawing and focus on applying principles of projection and developing surfaces of objects.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    96 views10 pages

    Assignment For Autocad

    Uploaded by

    amit bhagure
    This document contains assignments from the Department of Mechanical Engineering at the K. K. Wagh Institute of Engineering Education and Research. It includes 6 assignments involving topics like drawing projections of geometric solids such as pyramids, prisms, and cones in different orientations, developing surfaces of solids, drawing curves like ellipses and parabolas, and producing orthographic views from given figures. The assignments cover concepts in engineering drawing and focus on applying principles of projection and developing surfaces of objects.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 10

    Department of Mechanical Engineering

    K. K. Wagh Institute of Engineering Education and Research


    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003

    Assignments

    1. A Square Pyramid Side Of Base 40mm And Axis Height 75mm Is Kept On
    One Of Its Corner Such That Axis Is Making 30 Degree With Hp And 25
    Degree With Vp.Draw The Projection Of Pyramidwhen Apex Is Towards
    Observer.
    2. Rod OC , 75mm long is rotating uniformly about O. During the time rod
    completesone; point p starts from c moves along the rod uniformly upto O and
    eaches back to point p, Give the name of the curve.
    3. a square prism side of base 23 mm and axis height 46 is kept on HP , draw
    devlopment of lateral surface of prism.
    4. a right circuler of base diameter 46 mm axis height 61 mm has it is base in hp.
    draw the devlopment of lateral surface (dls) of cone
    5. A hexagonal prism of side 39mm And height 69mm is kept on HP on one of
    its base corner such that its axis makes an angle of 30o/ with HP. Draw the
    projection of the prism when plane of axis is inclined at 45o/ with XY line.
    6. FIGURE SHOWS ORTHOGRAPHY VIEWS OF THE OBJECT, DRAW
    FRONT VIEW, TOP VIEW AND SIDE VIEW
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003

    Assignment No. 01

     Draw an ellipse by rectangle method having major axis 139 and minor axis 109.

     A 120 mm long link OA rotates about O at uniform angular velocity .A point


    initially at A moves along AO at a uniform rate and reaches O during one
    revolution of the link. Draw the locus of the point P for one revolution. Name
    the locus.
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003

     The major and minor axis of an ellipse measure 100mm and 70mm resp. Draw an
    ellipse by rectangle method.

     Draw a parabola having base length 80mm and axis height 50mm by
    rectangle method.
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003

    Assignment No. 02

     A right circular cone of base diameter 50 mm axis height 60 mm has it is base


    in H.P. Draw the development of lateral surface of cone.

     Draw the development of a hexagonal prism with base side 30 mm and axis
    height 80 mm, kept on H.P. when it is cut by an A/P inclined at 30° to H.P.
    and bisecting axis of prism.
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003

     A pentagonal Pyramid having side of base 27 mm and axis length 49mm is


    kept on HP on one of its base edge in such a way that triangular face
    containing that edge makes an angle of 35 to HP.Draw the projections of the
    pyramid when the base edge on HP is inclined at 40° to VP

     A pentagonal prism side of base 25mm and axis length 51mm is kept on HP
    and one of its base corner such that makes an angle 30' to HP. Draw
    projection of prism when the plane of axis is inclined aaaaat an angle 45' to xy
    line.
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003

    Assignment

    Projection of Soilds
    Department of Mechanical Engineering
    K. K. Wagh Institute of Engineering Education and Research
    Hirabai Haridas Vidyanagari, Amrut Dham, Panchavati, Nashik-422003

    You might also like