Scribd
Upload
173 views3 pages

Memcom Re Programming Guide

This document provides instructions for reprogramming alarm numbers on a Memcom+ security system using the keypad or an access code. It outlines 3 steps: 1) Accessing the Memcom programming; 2) Selecting alarm, technical, and background numbers and deleting if needed; 3) Programming the new alarm numbers along with selecting guided or unguided messaging. Users can program up to 4 alarm numbers, 1 technical alarm number, and 1 background number by inputting the new numbers and selecting options using the keypad.

Uploaded by

Anonymous Ih1EEE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views3 pages

Memcom Re Programming Guide

This document provides instructions for reprogramming alarm numbers on a Memcom+ security system using the keypad or an access code. It outlines 3 steps: 1) Accessing the Memcom programming; 2) Selecting alarm, technical, and background numbers and deleting if needed; 3) Programming the new alarm numbers along with selecting guided or unguided messaging. Users can program up to 4 alarm numbers, 1 technical alarm number, and 1 background number by inputting the new numbers and selecting options using the keypad.

Uploaded by

Anonymous Ih1EEE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Memcom+ Re-programming

Reprogramming on site using Memcom Keypad

OPTION 1: 453 Memcom with ‘1 Programming‘ shown on the display

STEP 1 (Accessing Memcom programming)


1. Press 1
2. Screen shows ‘Use * to go back or use # to accept‘ (this will disapear
after a couple of seconds)

STEP 2 (Selecting Alarm/Technical & Background numbers & deleting)


1. Select TEL. numbers, followed by #
2. Select Alarm n01, followed by # (go to STEP 3)

3. Select Alarm n02, followed by #, go to STEP3 to program or press


down arrow to delete
4. Select Alarm n03, followed by #, go to STEP3 to program or press
down arrow to delete
5. Select Alarm n04, followed by #, go to STEP3 to program or press
down arrow to delete

6. 6. Select Technical Alarm, followed by #, go to STEP 4 to program or


press down arrow to delete
7. 7. Select Background Alarm, followed by #, go to STEP 4 to program
or press down arrow to delete

STEP 3 (Programming Alarm number)


1. Type in your new alarm emergency number followed by #

If you need further support please


get in touch via phone or email.
t: 01628 540100
e: [email protected]
2. Select Guided or Unguided (see NOTE below) followed by #

Guided: Plays instruction message for the operator, includes option to


play location, if recorded.
UnGuided: Plays no message

Exit programming by repeat pressing of the * key

STEP 4 (Programming Tech and Background Monitoring numbers, Avire


HUB)
1. Type in Technical number, followed by #
2. Select Memco, followed by #
3. Follow the On Screen message by pressing to duplicate number to
Background (Recommended)

Example: Programming 1 number as Guided


Press 1 > select tel numbers, press # > select alarm n01, press # > type in
alarm number eg 0123456789, press # > Guided, Press # > press * > press *
> press*

OPTION 2: Memcom 450/453 using access code

STEP 1 (Accessing Memcom programming)

1. Press *1234# (Access Code default)


2. Using the UP/Down arrows will help navigate through the settings
3. If Alarm numbers 12- 14 and 15/16 Technical/Background numbers are
not required, make sure these values are deleted by pressing * then #

STEP 2 (Programming & deleting)


1. Press the UP arrow once this will take you to the alarm number 1 (*11)

If you need further support please


get in touch via phone or email.
t: 01628 540100
e: [email protected]
2. Enter new telephone number and then press # to confirm (Guided
message) E.g. (11) 0123456789# (3 confirmation bleeps are heard)
3. Press the UP arrow once this will take you to alarm number 2 (*12)
4. Enter new telephone number and then press # to confirm or * # to
delete
5. Press the UP arrow once this will take you to alarm number 3 (*13)
6. Enter new telephone number and then press # to confirm or * # to
delete
7. Press the UP arrow once this will take you to alarm number 4 (*14)
8. Enter new telephone number and then press # to confirm or * # to
delete
9. Press the UP arrow once this will take you to Technical Alarm number
5 (*15)
10. Enter Tech telephone number followed by **1 press # to confirm or *
then # to delete (**1 is a PC protocol/HUB for monitoring)
11. Press the UP arrow once this will take you to Background number 6
(*16) Enter Background telephone number followed by **1 press # to
confirm or * then # to delete (**1 is a PC protocol/HUB for monitoring)

Pressing # key after Telephone numbers sets Alarm as Guided: Plays


instruction message for the operator includes option to play location if
recorded

Adding **0 followed by # after Telephone numbers sets Alarm as


UnGuided: Plays no message
E.g.123456789**0

STEP 3 (Exit Programming)


1. Press #, then Press *01 #
Example: Programming 1 number as Guided

Press *1234# > Press ‘up arrow’ once, alarm 1 > type in Alarm number e.g.
0123456789 > Press # > Press # > Press *01#

If you need further support please


get in touch via phone or email.
t: 01628 540100
e: [email protected]

You might also like