Scribd
Upload
366 views2 pages

User Manual Floppy To USB Emulator: Model

This document provides information about the SFR1M44-U100K floppy disk emulator, including its features, operation, and specifications. The emulator uses a USB flash drive to emulate a 1.44MB floppy disk, allowing access via a standard 34-pin floppy disk interface and formatting the flash drive into 1000 partitions. The user manual describes how to format the flash drive, read and write data, and provides details on the front panel, jumper settings, and firmware version.

Uploaded by

Radulian Daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
366 views2 pages

User Manual Floppy To USB Emulator: Model

This document provides information about the SFR1M44-U100K floppy disk emulator, including its features, operation, and specifications. The emulator uses a USB flash drive to emulate a 1.44MB floppy disk, allowing access via a standard 34-pin floppy disk interface and formatting the flash drive into 1000 partitions. The user manual describes how to format the flash drive, read and write data, and provides details on the front panel, jumper settings, and firmware version.

Uploaded by

Radulian Daniel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SFR1M44-U100K GOTEK system

User manual
Floppy to USB emulator
Model:
SFR1M44-U100K code*：U01 142

Floppy driver with below function needed:


 Floppy driver with 34pin interface, and 5V DC power plug (example: SONY YE-DATA
ALPS TEAC EPSON PANASONIC NEC )
 Use 2HD flpppy disk with 1.44MB capacity
 Format of disk : Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data
transfer rate: 500 kbps Encoding method: MFM.

Features:
 Use normal usb flash drive as the medium for transfer design.
 34pin floppy driver interface, 5V DC power supply, easy to install.
 Capacity: 1.44MB 2HD Cylinders: 80 Tracks: 160 Sectors/Track: 18 Bytes/Sector: 512 Data
transfer rate: 500 kbps Encoding method: MFM.
 1000pcs partitions in usb flash drive can be used.
 Built-in self-format function. (read relevant documents to use this function)

Panel:

8segment numbers: represent partitions number


Green led: status of read and write operation
USB port: connect usb flash drive
Button:
Left button used to rise ten-digit, right botton used to rise single-digit, press 2 button together to
rise hundred-digit.

Operation :
 Format usb flash drive.
1. use built-in self-format function to format usb flash drive into 1000pcs partitions.
2. use software in CD format usb flash drive under WINDOWS XP/2000, into 000-099 100pcs
partitions.
3. install an emulator on computer, and format every partitions by operate driver A:.
4. use emulator UFA1M44-100, plug usb flash drive on it, connect to computer, it will

Version 1400616
SFR1M44-U100K GOTEK system

recognized as removabe driver A: or B: under WINDOWS XP/2000/7, format every partitions.


UFA1M44-100 also built in self-format function.
 Read and write data.
1. install emulator on machine
2. install emulator on computer
3. connect usb flash drive on computer, read and write data directory by software, under
WINDOWS XP/2000
4. use emulator UFA1M44-100, plug usb flash drive on it, connect to computer, read and write
data under WINDOWS XP/2000/7.

Jumper setting：(SFR1M44-U100K)
J5：---
JA：---
JC：---
JB：---
S0：Driver select 0
S1：Driver select 1
MO：Motor

Firmware version of emulator：


Keep pressed 2 button together , power on , 8segment numbers will display firmware version and
data of emulator to detect different model.

Error code：
E0：no specified file in usb flash drive
E16：built-in memory fault

Version 1400616

You might also like