MUTCD: Past, Present & Future

1930s

1920s

1950s
2000s
Gene Hawkins, Ph.D., P.E.
1960s
Texas A&M University 1940s
 Gene Hawkins’ Background
Civil Engineering faculty member at
Texas A&M University
Joint appointment with the
Texas A&M Transportation Institute
Son of traffic engineer
Collector of historic traffic
engineering documents
Writing/presenting on MUTCD
history since 1991
Chair of NCUTCD
 Manual on Uniform
Traffic Control Devices
Known as the MUTCD
Contains basic principles for
traffic control devices
Essential traffic engineering
tool
Extensive information
Long history
Multiple versions – many
editions
 MUTCD and NCUTCD
MUTCD: national TCD standard
Owned, administered, and revised by FHWA
National Committee on Uniform Traffic
Control Devices
Private organization, recommends MUTCD
changes to FHWA
History traces back to before first MUTCD
Presentation addresses contributions of
each to the MUTCD development
 Part 1

MUTCD Past
 MUTCD Evolution
There have been 10 editions of the MUTCD

1935 1942 1948 1961 1971 1978 1988 2000 2003 2009
Summary of MUTCD Evolution
MUTCD Size Thickness
Edition Pages Parts
Era (inches) (inches)
1935 166 4 6×9 ⅜
Initial
1942 208 4 6×9 ⅜
How did we end
1948 223 up 4with a such large
6×9 ⅜
Transition
document on333
1961 traffic6 control
6×9 devices?
⅝
1971* 377 8 6×9 ¾
1978 Mature 425 9 6×9 1⅜
1988 473 9 6×9 1⅜
2000 982 10 8½×11 1⅝
2003 Modern 754 10 8½×11 1¼
2009 864 9 8½×11 1⅝
*FHWA assumed MUTCD ownership
Traffic Control Devices History
Early markers were used in the Roman Empire
Also used on pioneer trails in America
Automobile age created new demands

Roman Empire Colonial America

Early 20th Century

Automobile Age
 Early Intersection Control
Hand signals, police, and semaphores
Traffic Signal Towers
 Early Traffic Signals
Many different signal designs
More Early Signals
 Early Traffic Signs
Need for devices increased with more
automobile travel
Little coordination between agencies
Early Grade Crossings
 Early Traffic Control Devices
The wide variety of devices created the
need for uniformity
1920 – 1st 3-color
signal Detroit

1911 – 1st centerline

Michigan
1914 – 1st electric signal
Cleveland
 Early Uniformity Efforts
1922 –Multistate signing review
Mississippi Valley Assoc of State Hwy Dept
Led to sign shape recommendations
Minnesota Department of Highways
Manual of Markers and Signs
Believed to be the first sign manual
1924 – National Conf on Street & Hwy Safety
Sign color recommendations
1925 – AASHO Joint Board report
U.S. Highway system
National signing recommendations
1923 Sign Shape Recommendations
Mississippi Valley Assoc of St Hwy Dept
Number of sides represents hazard level

RR Grade Crossing Caution

Stop Intersection Directions or

Regulations

Warning (speed reduction)

1924 Sign Color Recommendations
National Conference on Street and
Highway Safety
For signs and signals
Red - stop
White – directions
or distance
Green - proceed
Purple – intersection
Yellow - caution
 1925 Joint Board Report
Report of Joint Board on
Interstate Highways
AASHO led
Approved by Sec of Agriculture
Developed U.S. Highway system
Included recommendations for
standard signs
 1927 AASHO Manual
Evolved from Joint Board
First national manual
Rural signs only
Title:
Manual and Specifications for
the Manufacture, Display,
and Erection of U.S.
Standard Road Markers and Revised 1929
Signs and 1931
1927 Signs

Block letter
font
 1930 NCHS Manual
Prepared by American
Engineering Council
Signs, markings, and signals
for urban areas
Title:
Manual on Street Traffic
Signs, Signal and Markings

Not Revised
1930 Signs
 Birth of the MUTCD
Problems of two manuals led to
creation of the MUTCD
Joint
Committee

1927 Rural 1930 Urban

Manual Manual
1935
MUTCD
 1935 MUTCD
First MUTCD
1935 mimeograph
1937 typeset
Signs
White or yellow
Diamond, square, circle,
octagon, rectangle
Markings
White, yellow, or black 1935 Original
Signals
3-color signal as standard 1937 Typeset
Approved as national standard Revised 1939
Published by JCUTCD, not a federal document
1935 Signs
 1935 MUTCD Quotes
The JCUTCD “deplores the independent
procedure of certain jurisdictions in the
selection of shapes and color combinations at
variance with these standards, and hopes the
importance of complete uniformity will be
increasingly recognized.”
“Traffic control requirements in any specific case
cannot be determined by guesswork. They
should be based on sound engineering principles
established by factual studies of accidents,
speeds, delays, and physical conditions which
will show the exact nature of the difficulty and
indicate what particular device or method of
control is needed.”
 1942 MUTCD
Few major changes
Addressed wartime
conditions
Conservation of materials
Blackout traffic control
ITE added to JCUTCD
Still no federal ownership
Not Revised
War Dept and Civilian Defense
assisted preparation
Blackout Devices
 1948 MUTCD
Significant rewrite
Signs
Simplified messages
Eliminated square signs
Added advisory plate
Rounded alphabet
Pavement markings
Yellow – Double center & barrier line
White – all other applications
Revised 1954
Edge lines not recommended
Simplified signal warrants
 1948 MUTCD Development
JCUTCD
AASHO, NCSHS, ITE (7 men each + 1 sec [fed])
Continued as national standard (ASA D6.1)
Published by Public Roads Administration
Federal-aid Highway Act of 1944
Authorized Commissioner of Public Roads to
require compliance for highways receiving
federal aid
 1948 MUTCD Quotes
“This manual contains the best existing judgment
on several points on which research is now in
progress or being arranged for ...” “Because
such questions, old and new, present a constant
need for factual data, the JC has set up a
Subcommittee on Research.”
Until uniform laws replace the present wide
variation in State laws regarding signs and
signals, some jurisdictions may have to permit
deviations from the recommendations of this
manual. Fortunately, good progress is being
made in bringing about the enactment of the
desired uniform laws, and eventually such
deviations will be reduced to a minimum.”
 1948 Signs

STOP
Early Stop & Yield Signs
 1954 Revision
Significant sign changes

Became

Secondary messages eliminated New Sign

 Traffic Signal Legacies
Non-standard traffic signals continued in
use through the 1950s and 1960s in
some locations

Darley 2 bulb signal

Wiley signal

NYC Olives
 Freeway Guide Sign Tests
New Interstate Highway system created signing
and marking challenges
BPR research in mid-1950s
Evaluated freeway guide sign design
Black, blue, and green backgrounds
Lower case letters
Other new signs
Results lead to new signing guidelines
1958 AASHO Interstate Manual
Created for the new Interstate
Highway system
New features
White on green guide signs
Lower case letters
Green on white service signs
Utilized larger sign sizes Revised 1961,
Blue service signs added in 1962, 1970
1961 revision
New Interstate Signs
 1961 MUTCD
Compliance required for
federal aid roads
New material:
Construction traffic control
Civil defense signing
Freeway guide signing

Not Revised
 1961 MUTCD Development
Prepared by National Joint Committee
UTCD
AASHO (7), ITE (7), NCUTLO (7), NACO (2),
AMA (2), sec from BPR
Continued as national standard (ASA D6.1)
Submitted by AASHO to BPR for concurrence
Published by Bureau of Public Roads
Federal-aid Highway Act of 1944
Authorized Commissioner of Public Roads to
require compliance for highways receiving
federal aid
 1961 MUTCD Quotes
All modifications or new Manual materials must be approved by the
five sponsoring organizations. Such approval constitutes both
official and professional endorsement of use of the Manual in all
States, counties, and cities.
On all streets and highways the need is great for high, uni- form
standards of traffic control to protect the public investment in
the Nation's roads and streets, and to foster safety, convenience,
and economy of operation.
In many jurisdictions, particularly small counties and cities, the
problem is not simple. Qualified engineers are needed to
exercise the engineering judgment inherent in the selection of
traffic control devices, just as they are needed to locate and
design the roads and streets which the devices complement. Yet
many small jurisdictions with responsibility for traffic control do
not have qualified engineers on their staffs. Those jurisdictions
should seek assistance on difficult problems from the State
highway department, their county, a nearby large city, or a
qualified traffic consultant.
1961 Signs
 1971 MUTCD
Significant rewrite
DOT ownership
New features:
Content: school areas
Color: orange
Shapes: pennant, pentagon
International sign influence Revised 8 times
Many new symbols
Yellow markings for opposing traffic
 1971 MUTCD Development
Continued to be defined as ASA Standard D6.1
Prepared by NJCUTCD
AASHO (7), ITE (7), NCUTLO (7), NAC (2), NLC (1)
Adopted and published by FHWA
Approved by Administrator as National Standard for
all highways open to public travel
 1971 MUTCD Quotes
In recognition of the proven international value and need for
symbols, and to present a nniforni and better understood
systein of signing, this 1970 revision inclndes a wider use
of symbols, both in the regulatory and warning series.
Color coding is employed more extensively in signs, and to
define direction of travel by pavement markings.
This Manual also includes, for the first time, a complete and
separate part covering traffic controls for school areas
(Part VII).
Advances in technology will produce changes in the highway,
the motor vehicle, and in driver proficiency and portions of
the system of control devices in this manual will gradually
become obsolete. In addition, unique situations often arise
for device applications which may require interpretation or
clarification of this Manual. It is important to have a
procedure for recognizing these developments and for
introducing new ideas and modifications into the system.
1971 Signs
 1978 MUTCD
Update of 1971 edition
Loose leaf (binder) format
Individual page revisions
New content
RR-hwy grade crossings
Bicycle facilities
Yellow markings on left side Revised 4 times
 1978 MUTCD Development
Prepared by the National Advisory Committee on
Uniform Traffic Control Devices (an official
federal advisory committee)
AASHTO (7), ITE (7), NCUTLO (7), NAC (3), NLC (1),
NAGHSR (2), IACP, NEMA (1), ARTBA (1), IBTTA (1)
Continued to be owned, administered, and revised
by FHWA
In 1979, FHWA terminated the NAC and assumed
full responsibility for developing and revising
MUTCD content while agreeing to accepting
recommendations
The NCUTCD was created from the NAC
membership with its first meeting in Jan 1980
1978 Signs
 1988 MUTCD
Update of 1978 edition
Included new revision (#5)
New content
Recreational/cultural signs
Logo signs
TODS
Planned to be revised only
Revised 7 times
for safety reasons Rev 3: Part VI
1988 Signs
 MUTCD During the 1990s
Blue ribbon panel (1989)
Recognize shortcomings of 1988 MUTCD
Recommended reformat and rewrite of 1988 MUTCD
Need to clarify intent of language
Examples of language challenges
“shall be permitted” “may be justified”
“shall preferably be” “it is desirable that”
“normally should” “it is necessary that”
“may be required” “is intended for use”
Two step process: reformat then rewrite
Started in early 1990s
 Rewrite/Reformat Effort
First step
Evaluate current language
Reformat language using shall, should, & may
Classify as standard, guidance, option, support (with
headings)
Second step
Rewrite reformatted language
Update content
Fix inconsistencies
Multiple proposed rules in mid- to late-1990s
Resulted in 2000 MUTCD
 2000 MUTCD
Millennium edition
Reformatted/rewritten
Significantly different
from 1988 MUTCD
First with 8½11 pages
First to be on the internet
Many errors & shortcomings
1 Errata
Editorial and technical errors
1 Revision
Errata did not correct all problems
 Significant Changes
New structure
Standard, Guidance, Option, Support
New parts added to MUTCD
Low Volume Roads
Highway-Light Rail Transit Grade Crossings
Islands part deleted
Definitions added
Primary units: metric
 2000: Selected Key Changes
Legibility index = 40 ft/in
Sign graphics not accurate
Lane ending symbol
(W4-2) dropped
Crosswalk lines dropped
from crossing signs
New Yield Line
In-road lights

Courtesy of S. Wainwright
 2003 MUTCD
Primarily an update of the 2000 MUTCD
Changes
Editorial improvements
Graphics corrected
Technical corrections
Some new material
Compressed text
982 to 754 pages
2 Revisions
 2003: Selected Key Changes
Some new/revised signs
New sign color
Pink for incident mgmt
Countdown ped signals
Metric sign changes
Accessibility in work zones
Revisions:
1: Pharmacy signing
2: Min sign retro
 Part 2

MUTCD Present
 2009 MUTCD
Current edition (10th overall)
Final rule: Dec 16, 2009
NPA received more
comments than any other
1,840 individual letters
15,000+ comments
Many changes
611 significant changes listed
in Federal Register final rule
 2009: Philosophical Changes
FWHA focus for 2009 MUTCD
Uniformity
Complete street concept: all road users


Aging population
Innovation
More specific detail, reduced ability to deviate
Fine tuning of TCD use
More devices addressed
Compliance dates restructured
Compliance as part of systematic upgrade
Combine RR and LRT parts
MUTCD applies to private property
New content
Toll road & managed lanes traffic control
Purple for toll roads
Changeable message signs
 2009: Selected Key Changes
Paragraphs numbered, guidance italicized, metric values removed
Change in definition for a standard
Added: “Standard statements shall not be modified or compromised
based on engineering judgment or engineering study”
Legibility index = 30 ft/in
Increases in sign sizes – 36 in Stop sign required for some situations
Increased requirements for One Way signs
Requirements for warning signs for


changes in horizontal alignment
Revised optional lane guide signing Difference Between


Sign Type Speed Limit and Advisory Speed
Arrow per lane sign

 
5 mph 10 mph 15+ mph
High-visibility safety apparel Turn, Curve, Reverse Turn,
Reverse Curve, Winding Road
Recommended Required Required
Required for all workers within the
Advisory Speed Plaque Recommended Required Required
public right-of-way Chevrons Optional Recommended Required

School warning signs: FYG only

Cannot use Speed Limit sign alone to end school speed limit zone
Yield or Stop signs required at passive grade crossings
 2009: Signal Changes
12 inch indications for all new installations
Limited use of 8 inch indications
Signal head for each lane when speed  45
Backplates required
Flashing yellow arrow for left turns
Hybrid beacon (HAWK) for ped crossing


 2009 MUTCD Revisions
Rev 1: engineering judgment & definition of
a standard
Added: the MUTCD is not a substitute for
engineering judgment
Deleted: standard statements shall not be
modified or compromised based on engineering
judgment
Rev 2: compliance dates
12 of the previous 58 compliance dates retained
Several of the remaining 12 have been modified
 Hotlinks 2009 MUTCD
FHWA posted hotlinks version of the 2009 MUTCD
Cross-referenced chapters, sections, figures, and tables
Pop-up definitions
Links to external documents and web sites
Links to official interpretations
Indications of material affected by known errors
31 MB file – download instead of using on-line version
 Part 3

MUTCD Future
 MUTCD Trends
Used by more and more people
Less variation between states
Greater consideration of local level
perspective
Size and content growing
More devices addressed
Greater specificity for devices
Some non-TCD material
TCD standards vs good practices
 Near-Term MUTCD Future
Current MUTCD: 2009 edition
Prior expectation: NPA in 2015
Current expectation: NPA in 2019
Final rule near end of 2020 (2020 MUTCD)
 NPA Expectations
Expectations (hope?) for NPA:
Contains 200± NCUTCD recommendations
(209 approved Jan 09-Jan 19)
Minimal new content not developed/reviewed
by NCUTCD
Nothing too controversial
Establish new base from which to develop the
next MUTCD
At least 3-4 month docket (desire overlap
with NCUTCD meeting)
Likely to be some surprises
 NPA Content
Last large MUTCD NPA: January 2008
(proposed rule for 2009 MUTCD)
68 pages, 513 identified changes to MUTCD
6 month comment period
No info on NPA content until published
Federal work on rulemaking is behind a curtain
January 2008 NPA had 1,960 items in docket
Some items were 50+ pages in length
Over 15,000 individual comments
2008 NPA Fed Reg Page
Regulation.gov for 2008 NPA
 NCUTCD NPA Review Process
NCUTCD in final stages of adopting process
for reviewing NPA
Steps:
1. Assign items to technical committees (TC)
2. Review each item and determine need for
Council action:
a. Same as prior NC recommendation – no
Council action necessary
b. Different from prior NC recommendation or
TC recommends changes to NPA language –
Council vote required
 NPA Review Flow Chart
Start
TC
Review

NPA
DRAFT
Submit Yes Prior
Yes same No TC No TC
Docket NC
as NC (new agrees Revision
Comment A rcmd rcmd
content)
No Yes

Submit Yes Support

Docket original Council
Comment A rcmd Approval

No
Yes
Yes Agree
Council
w/
Approval
NPA
Submit
No TC No Docket
Submit Revision Comment C
Docket
Comment B Docket Comment A: NCUTCD supports original rcmd
Docket Comment B: NCUTCD agrees with NPA
Docket Comment C: NCUTCD recommends change to NPA
 Long-Term MUTCD Future
Time to start thinking about MUTCD changes after
2020 edition
Connected and autonomous vehicles
Technological advances in TCDs
Shorter implementation time frames
Greater focus on peds, bikes, and transit
More significant differences between congested
urban areas, suburbs, and rural areas – challenges
of guidelines that address such a wide range of
conditions, users, and environments
MUTCD delivery options and decision-making tools
NCUTCD strategic plan for MUTCD
On NCUTCD website (under links), 79 pages
 MUTCD Resources
MUTCD web site
http://mutcd.fhwa.dot.gov
HTML & PDF versions of MUTCD (incl hotlink)
Lists of changes

mutcd.fhwa.dot.gov
 Additional Resources

MUTCD History Resources

Search “Gene Hawkins MUTCD” – goes to CE Profs website
Select MUTCD History link
MUTCD history PPT presentation
ITE Journal articles
Scans of old MUTCDs
Signs Not in the Next MUTCD
Questions