Select (Spacebar)

Ctrl = Add to selection

Shift = Toggle in/out of selection
(SPC) (G) Make Component
(From selected entities) Keyboard Shortcuts (WIN)
Shift+Ctrl = Remove from selection NOTE: This keyboard shortcuts guide is based on the Large Toolset. You can
enable to Large Toolset by right-clicking on an empty space in the toolbar,
Paint Bucket
Ctrl = Adjacent fill
(B) (E) Eraser
Ctrl = Soften/Smooth and clicking on Large Toolset.
Shift = Replace material in model Shift = Hide
Shift+Ctrl = Replace material on object Shift+Ctrl = Unsoften/Unsmooth
Alt = Sample material
Line (L) Freehand
Shift = Lock current direction Create freehand line segments Tape Measure
Ctrl = Toggle create guide
(T) Dimension
Select edge, curve, circle, or two points
Number w/ units = Length
Rectangle
Ctrl = Start from center
(R) Rotated Rectangle
Rectangle from 3 points
Measure two points, type
dimension = Resize model
Shift = Lock current plane Alt = Set protractor baseline
Shift = Lock current plane Protractor Label
Circle
Shift = Lock current plane
(C) Polygon
Shift = Lock current plane
Guides along angle Go to Model Info > Text to edit appearance

Radius + Enter = Size

Number + S + Enter = Segments
Radius + Enter = Size
Number + S + Enter = Segments
Axes 3D text
Redefine Axes Create extruded text
Arc
Arc from center and 2 points
(A) 2Radius
Point Arc
+ R + Enter = Dimension
Number + Enter = Bulge
Number + S + Enter = Segments Orbit Pan
Hold middle mouse button Shift + hold middle mouse button
3 Point Arc Pie
Arc through 3 points Closed arc from center and 2 points
Zoom Zoom Window
Scroll middle mouse wheel Drag area to zoom to
Move
Shift = Lock current direction
(M) (P) Push/Pull
Ctrl = Toggle make new face
Ctrl = Toggle copy. 10x or 10/ for array Double-Click = Repeat distance Zoom Extents Previous View
Alt = Toggle auto-fold Number + Enter = Distance Shift + Z Go back to previous camera view
Rotate
Ctrl = Toggle Copy
(Q) Follow Me
Extrude face along path
Number + Enter = Angle Alt - Extrude around face perimeter
Rise:Run + Enter = Slope
Position Camera Look around
Position camera from point Look around from fixed camera position
Scale (S) (F) Offset
Double-Click = Repeat offset
Height + Enter = eye height
Ctrl = Scale about center
Shift = Scale Uniformly Alt = allow overlap Walk C
A-5
Section
Number + Enter = Scale Factor Number + Enter = Distance Walk navigation mode Insert section cut
Number w/ units = Length

Number Pad
Enter dimensions during drawing and
modification actions.

Arrow Keys
Lock movement along Green,
blue, red, or parallel axis.

© 2018 Bizfound, LLC