PRODUCT BULLETIN SB 8012B

NAVIGATION LIGHT CONTROL PANEL

Type 8012 NAVIGATION LIGHT CONTROL

T h e P M C Ty p e 8 0 1 2
A B
Navigation Light control ON PORT ON
SIDELIGHT
panel is a compact, modular, FL OFF - ON FL

solid-state control, alarm and

monitoring unit. The panel A ON ON
B
STBD
SIDELIGHT
has a black anodized front FL OFF - ON FL
and is designed for flush
mounting in the wheelhouse. A ON ON
B
FWD
It continuously monitors the MASTHEAD
FL OFF - ON FL
status of all remote
navigation lights, whether
A ON ON
B
they are powered or turned AFT
MASTHEAD
off. When a navigation light FL OFF - ON FL

or lamp circuit fails, visual

and audible alarms are A ON ON
B
STERN
activated. FL OFF - ON
FL

FEATURES A B
ON ON
! Continuous supervision of FWD
ANCHOR
FL OFF - ON FL
remote navigation lights
and wiring, when lights are
A B
on or off ON AFT
ANCHOR
ON

! Controls heavy power FL OFF - ON FL

loads with various AC and

DC voltages A ON ON
B
UPPER
! Auto transfer to backup FL
NUC
OFF - ON FL
light when primary light
fails A ON ON
B
LOWER
! Lights may be arranged in NUC
FL OFF - ON FL
a group for a common task,
so that switching one light A ON STERN
on turns all lights in the TOW
group on FL OFF - ON

! Lights may be grouped so

that failure of any primary A ON
AFT
STROBE
light in the group OFF - ON

automatically transfers all

of the group members to
their backup lights
! Protected from external
short circuits
PRI ON SEC ON
! Long life LED's used for
AVAIL AUTO SEC AVAIL
display and status: lamp LED DIM FAIL FAIL LAMP DIM
engraving is back lit
! Accepts a wide range of PRI PWR
ALARM
SILENCE SEC PWR
light wattage CONTROL CONTROL

! Includes dimmer control

and internal alarm horn PRIME MOVER CONTROLS INC.

! All modules are plug-in and P/N S/N

VANCOUVER CANADA
front removable without
tools
! Includes driver outputs for
remote mimic display
PRIME MOVER CONTROLS INC.
SB 8012B
 NAVIGATION LIGHT CONTROL PANEL
STANDARD ENCLOSURES A
NAVIGATION LIGHT CONTROL

ON ON
B

FL FL

A ON ON
B

FL FL

A ON ON
B

FL FL
NAVIGATION LIGHT CONTROL
A ON ON
B A ON ON
B

FL FL FL FL

A ON ON
B A ON ON
B

FL FL FL FL

A ON ON
B A ON ON
B

FL FL FL FL

A ON ON
B A ON ON
B

FL FL FL FL
NAVIGATION LIGHT CONTROL
A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

A ON ON
B A ON ON
B A ON ON
B

FL FL FL FL FL FL

PRI ON SEC ON PRI ON SEC ON PRI ON SEC ON

AVAIL AUTO SEC AVAIL AVAIL AUTO SEC AVAIL AVAIL AUTO SEC AVAIL

LED DIM FAIL FAIL LAMP DIM LED DIM FAIL FAIL LAMP DIM LED DIM FAIL FAIL LAMP DIM

ALARM ALARM ALARM

PRI PWR SILENCE SEC PWR PRI PWR SILENCE SEC PWR PRI PWR SILENCE SEC PWR
CONTROL CONTROL CONTROL CONTROL CONTROL CONTROL

PRIME MOVER CONTROLS INC. PRIME MOVER CONTROLS INC. PRIME MOVER CONTROLS INC.
P/N S/N P/N S/N P/N S/N
VANCOUVER CANADA VANCOUVER CANADA VANCOUVER CANADA

12" Size 16" Size 19" Size

8 Lamp Modules 12 Lamp Modules 15 Lamp Modules
1 Power Select Module 1 Power Select Module 1 Power Select Module

Type 8012 Navigation Light Control Panel

The PMC Type 8012 Navigation Light control Failure of any lamp or circuit causes a red failure
panel continuously monitors the status of all remote light to turn on, as well as an internal horn. The horn
navigation running lights, whether they are powered may be silenced by an included pushbutton but the red
or turned off. When the lamp or circuit fails it will failure light remains on until the fault is corrected. If
provide a visual and audible alarm. the circuit was turned on when the failure occurred,
The navigation lights to be monitored may then the green light turns off and will only turn on
typically include: again when the circuit is again operable. If the back-
up lamp is selected and a failure exists, then the status
! Port - dual lamp failure display will continue until the fault is corrected.
! Stbd - dual lamp External short circuits will only cause failure and will
! Foremast - dual lamp not damage internal circuits.
! Mainmast - dual lamp
! Stern - dual lamp It is possible to functionally group modules
! Stern Tow - dual lamp together so that only module in the group, or an
! Tow 1 - dual lamp external switch, can select a function or task and
! Tow 2 - dual lamp simultaneously turn on or off all of the lights in the
! Anchor 1 - single lamp group. Also it is possible to group modules together so
! Anchor 2 - single lamp that failure of one primary light in a group will
! N.U.C. 1 - dual lamp automatically transfer every light in the group to its
! N.U.C. 2 - dual lamp back-up light.

The panel includes front replaceable plug-in The panel operates from two AC and/or DC power
modules with front accessible, easily replaced sources (primary and secondary), which may be
standard fuses. Modules are capable of monitoring a selected by a front mounted switch; failure of either
wide range of lamp wattage without circuit power source is visually and audibly alarmed.
modification. Each module includes power on and Automatic transfer from the primary power source to
power failure lights for each circuit, as well as an off- the secondary power source occurs when primary
on power select switch. Modules which control dual power is not available. All identifying nameplates are
running lights provide automatic transfer from rear illuminated using long-life LED displays. A
primary to backup, on failure of the primary light.

PRIME MOVER CONTROLS

 NAVIGATION LIGHT CONTROL PANEL
DUAL LAMP CONTROL MODULE LAMP SWITCH CONTROL MODULE

A ON ON
B A ON
FWD AFT
MASTHEAD STROBE
FL OFF - ON FL OFF - ON

For controlling and monitoring dual navigation For controlling external loads (up to 4 amps).

TWIN SINGLE LAMP CONTROL MODULE LAMP GROUP SWITCH MODULE

A ON ON
B SHOOTING HAULING
UPPER DRAGGING CAUGHT
NUC
FL OFF - ON FL UNDERWAY N.U.C.
OPERATION SELECT

For controlling and monitoring two single For controlling groups of navigation lights.
independent navigation lights simultaneously.

SINGLE LAMP CONTROL MODULE BLANK FRONT COVER PLATE

A ON STERN
TOW
FL OFF - ON

For controlling and monitoring one single

POWER SELECT MODULE AUTOMATIC POWER TRANSFER UNIT

PRI ON SEC ON

AVAIL AUTO SEC AVAIL

LED DIM FAIL FAIL LAMP DIM

ALARM
PRI PWR SILENCE SEC PWR
CONTROL CONTROL

For controlling and monitoring of two AC and/or

DC power sources for all lamp control loads.
(Primary and secondary power sources must Automatically transfers from the primary power
have the same nominal voltage) Failure of one source to the secondary power source when
supply is visually and audibly alarmed; transfer primary power is not available. Can be mounted
to alternate supply is automatic (optional manual on rear motherboard or located separately for
transfer is available). Module includes horn, track mounting. For additional details see PMC

PRIME MOVER CONTROLS

 DIMENSIONS FOR TYPE 8012 NAVIGATION LIGHT CONTROL PANEL
FRONT SIDE REAR CUT OUT

19" SIZE
15
14

16" SIZE
12
11
10

12" SIZE
8
7
6
5
4 A B C D
3
2
1

17.8mm 101.64mm
177.8mm 0.70” 163.8mm 4.00” L
204.5mm
7.00” 8.05” 6.45” 166.4mm
48.3mm 6.55”
1.90”
ENCLOSURE DIMENSIONS (INCHES) ENCLOSURE DIMENSIONS (mm)
A 12 16 19 A 304.8 406.4 482.6
B 10.60 14.60 17.60 Mounting hardware kit "F", included with each panel, B 269.2 370.8 447.0
C 11.37 15.37 18.37 C 288.8 390.4 466.6
D 10.75 14.75 17.75
consists of 4 socket cap machine screws, nuts and washers D 273.1 374.7 450.9
E 4 HOLES DRILL 0.220 OR TAP 10-24 UNC E 4 HOLES DRILL 5.50 OR TAP M5 X 0.8
F F

SCALE 1 : 8

SPECIFICATIONS: ORDERING DATA:

Electrical: 1. Select number of modules of each type:
! Supply Voltage: 12, 24, 32, 120 or 240 VAC/VDC Type DS ________________
(Primary and secondary power source must have Type TS _______________
same nominal voltage) Type SS _______________
! Navigation lamp wattage: From 50 Watts @ 12 V Type LS ________________
to 150 Watts @ 240 V Type GS ________________
! Enclosure rating: Total current of all navigation 2. Select enclosure size:
lights powered continuously should not exceed 25 1 12" size - 8 lamp modules
A per enclosure 1 16" size - 12 lamp modules
! Wire size: 8 AWG power wiring, 12 AWG 1 19" size - 15 lamp modules
navigation light wiring, 16 AWG control wiring (up Each enclosure includes:
to two wires per terminal) ! 1 power select module - type PSM
Environmental: ! Blank spacers as required
! Operating temperature -20 to +70°C
! Storage temperature -40 to +85°C 3. Specify:
! Vibration: Frequency range 2 to100 Hz ! Primary power _____ volts ___ AC or DC
Peak to peak amplitude 2 mm below 13.2 Hz ! Secondary power ____ volts ___ AC or DC
Acceleration amplitude 0.7 g above 13.2 Hz ! List of navigation lights
Physical: ! Enclosure position for each navigation light
! Dimensions: 304.8 mm, 406.4 mm or 482.6 mm H ! Bulb wattage for each navigation light
× 177.8mm W × 204.5mm D (12", 16" or 19" H × 7" ! Location of auto power transfer unit APTU
W × 8.05" D) 1 Stand-off mounted on rear motherboard
! Automatic Power Transfer Unit adds 1.9" (48.3 1 Located separately on track mount
mm) to depth and 0.47 kg (1.04 lbs) ! List of navigation lights in common task group
! Weight: 9.77 kg (21.6 lbs) 19" Enclosure (optional)
! 8.31 kg (18.37 lbs) 16" Enclosure ! List of navigation lights in autotransfer on fault
! 6.28 kg (13.89 lbs) 12" Enclosure group (optional)
! Mimic output drive capability provided
(optional)

PRIME MOVER CONTROLS INC.

3600 GILMORE WAY, BURNABY B.C. CANADA V5G 4R8
PROD_REF\8012_NLP\C_BULLTN\SB-8012BR00.CDR TEL (604) 433-4644 FAX (604) 433-5570 www.pmc-controls.com ALL RIGHTS RESERVED