Move (M+Enter):-

By this one can move any objects at a specified

distance and direction.

Copy (CO+Enter):-
This command is used to copy an object at a
specified distance or direction. It works almost
like Move Command. The only difference is that
Process of using move command:- it makes a copy of the original objects.
● Select Move Command from modify panel.
● Select the object.
● Right click.
● Left click on object.
● Move it any direction.
● D Enter
● Type distance
● Enter.
Rotate (RO+Enter):-
By this one can rotate any selected object
around a base point to an angle. It rotates any
objects in clock and anti-clockwise. We can also
make a copy of the object by rotate command.
Process of using Rotate command:-
● Select Rotate command from modify panel.
● Select the object.
● Right click
● Specify base point
● Enter C (copy) or Enter R (reference)
Process of using Copy command:-Select copy
● Type rotation angle
command.
● Select object.
● Enter.
● Right click
● Specify base point.
● Move it any direction.
● Make multiple copies.
● Enter.

Mirror (MI+Enter):-
This command creates a reverse copy of the
selected object.

Scale (SC+Enter):-
By this command, one can enlarge or reduce the
objects. The length and width of objects would
be enlarged or reduced at the same size.

Process of using mirror command:-

● Select mirror command.
● Select object.
● Right click.
● Click on the first point of mirror line.
● Drag mouse in the direction where you want
to make mirror
● Specify the second point of mirror line.
● Enter.
Stretch:-
By this command, one can move some part of
drawing with maintaining the connection with
other parts.
Process of using Stretch command:-
● Select Stretch Command.
● Select the part of the object which you want Process of using Scale command
to stretch. ● Select Scale command.
● Right click. ● Select the part of the object which you want
Drag the mouse in that direction where you to enlarge or reduces.
want to stretch ● Select base point
● Type the value
● Right click.
● Drag the mouse.

Trim (TR+Enter+Enter):-
This command is used to trim any objects whose
edge meet the other objects. It trims the crossed
line.

Fillet (F+Enter):-
By this command, one can round the straight
corner of any objects.

Process of using Trim Command:-

● Select trim command from modify panel
● Double Enter.
● Double click on the intersect line or extra
line.
● If we want to exchange trim command into
Extend command press shift.
Extend (EX+Enter):-
This command helps to extend the line to join
the edges of other objects line. It is used as a
trim command.
Process of using Extend command:-
● Select Extend command from modify panel.
● Select object.
● Specify opposite corner.
● Right click.
Process of using Fillet command:-
● Select Fillet Command.
● Double left click on object whom you want to
● Type R (radius).
Extend.
● Enter.
● Enter.
● Put the value of radius.
● Enter.
● Select the first object.
● Select the second object.

Chamfer (CHA+Enter):-
By Chamfer command, one can bevels the
corner of objects. It cuts the object in any Angle.

Erase (E+Enter):-
By this command, one can remove the extra part
from any object.

Process of using Chamfer command:-

● Select chamfer command.
● Type D (distance)
● Type first chamfer distance.
● Enter
● Type second chamfer distance.
● Enter.
● Select the first object.
● Select the second object.
Blend Curves:-
It makes a Spline between two lines or curves.
Process of using blend curves command:-
● Select blend curves command
● Select the first object
● Select the second object
● Specify types of blends
● Tangent
● Smooth
● Enter.
Process of using Eraser command:-
● Select Erase Command.
● Select the object.
● Right click.
● Ok.

Offset (O+Enter):-
By this command, one can create parallel copies
of any line, circular copies of any circle at a
specified distance.

1. Rectangular Array:-
It makes copies of any object in rows and
columns.
Process of using Rectangular Array:-
Process of using Offset Command:- ● Select Array Command
● Select offset Command. ● Select object
● Enter D (distance). ● Right click
● Type distance. ● Select Rectangular Array
● Enter. ● Modify values on the Array context ribbon.
● Select object. 2. Polar Array:-
● Move the mouse in that direction where you It makes copies of any object around the center
want to be offset. point in the circular pattern.
● Left click. Process of using Polar Array:-
Array (AR+Enter):- ● Select Array command
It creates multiple copies of any objects. We can ● Select object
create multiple copies of objects in the ● Right click
rectangular array, polar array or path array. ● Select Polar Array
● Pick center point
● Click on mid-point
● Modify values on the Array context ribbon.
3. Path Array:-
It makes copies of an object along a Path. One
can make a path array in line, polyline, spline,
and arc.
 Process of using Explode Command:-
● Select Explode Command
● Select object which you want to break
● Right click.
Lengthen:-
It changes to object’s length and angle of arc. It
also works like Trim and Extend.

Process of using Path Array:-

● Select Array command
● Select object Process of using Lengthen:-
● Right click ● Select Lengthen Command
● Select Path Array ● Select an object ( delta, percent, total
● Select path curves. dynamic)
● Modify values on the Array context ribbon. ● Type value
Explode:- ● Select the line or arc in which you want to
This command is used to break a joint object. apply this command
● Click ok.
Break (BR+Enter):-
By this command, one can break a line or object
between two points in many part.

Join (J+Enter):-
By this command, one can join the break line or
two or multiple lines.

Process of using Break Command:-

● Select break command
● Select the first point of an object.
● Specify the second point
● Ok.
Break at point:-
By this command, you can break a straight line
into two parts but there would be no gap
between the lines.
Process of using Break at point Command:-
● Select break at point command
● Click on the first point
● Click on the second point.
● Ok.

Process of using Join Command:-

● Select join command
● Select the first point
● Select the second point
● Right click.
Edit Hatch:-
One can modify the hatch by hatch edit ● Click on that Array object which we want to
command. edit
● Click on first component object
● Click on second component object
● Break the Array component.
● Modify the object.
Edit Polyline (PEdit+Enter):-
It is used to edit any polylines. By this, we can
change any straight line into spline, arc-fit, curve
etc.

Process of using Edit Hatch Command:-

● Select Edit Hatch Command
● Click on Hatch whom we want to edit.
● Change the swatch if you want
● Change the angle
● Increase or decrease the scale.
● Ok
Edit Array:-
One can edit any type of Array by this
Command. We can edit Rectangular Array, Polar
Array and Path Array. Process of using Edit Polyline:-
● Select edit polyline command
● Select the polyline to modify
● Edit the polyline by entering these options
● Enter c (close) for creating a closed Polyline.
● Enter J (join) to join polyline.
● Enter W (width) to give a width for polyline
● Enter E (Edit Vertex) for editing a vertex.
● Enter F (Fit) for making an arc-fit polyline.
● Enter S (Spline) to create a spline
● Enter D (Decurve) for removing extra
vertices.
● Enter L (Ltype Gen)
● Enter R (Reverse) to reverse the polyline
● Enter U (Undo)
● Enter X (Exit) for end the command option
● Enter.

Edit Spline:-
It is used to edit any type of Spline. By this, we
can change any spline into polyline.
Process of using Edit Array Command:-
● Select Edit Array Command
 2. circle
3. polyline
4. arc
5. rectangle
6. polygon
7. spline
8. hatch
9. mirror
10. trim
11. fillet
12. chamfer
13. rotate
14. array/polar
15. array/path
16. array/rectangular
17. break
18. multiline
19. copy
20. ORTHO
Process of using Edit Spline:- 21. grid
● Select Edit spline command 22. polar tracking
● Select the Spline to modify 23. osnap
● Edit the Spline by entering these option 24. offset
● Enter C (Close) for creating a close Spline 25. move
● Enter J (join) to join Spline 26. stretch
● Enter F (Fit data) 27. join
● Enter E (Edit vertex) 28. erase
● Enter convert to polyline 29. mtext
● Enter R (Reverse) 30. list
● Enter U (Undo)
● Enter X (Exit) for end the command option
● Enter

1. line