Sample IEEE Paper for A4 Page Size

First Author#, Second Author*, Third Author#

#
First-Third Department, First-Third University
Address
1
first.author@first­third.edu
3
third.author@first­third.edu
*
Second Company
Address Including Country Name
2
[email protected]
Abstract— This document gives formatting instructions for 10 level-1 heading (in level-2 heading,
authors preparing papers for publication in the Proceedings of Small Caps), level-3 heading,
NAIMSAP. The authors must follow the instructions given in the paragraph author affiliation
document for the papers to be published. You can use this 11 author name
document as both an instruction set and as a template into which 24 title
you can type your own text.
All title and author details must be in single-column format
Keywords— Include at least 5 keywords or phrases and must be centered.
Every word in a title must be capitalized except for short
I. INTRODUCTION minor words such as “a”, “an”, “and”, “as”, “at”, “by”, “for”,
This document is a template. An electronic copy can be “from”, “if”, “in”, “into”, “on”, “or”, “of”, “the”, “to”, “with”.
downloaded from the conference website. For questions on Author details must not show any professional title (e.g.
paper guidelines, please contact the conference publications Managing Director), any academic title (e.g. Dr.) or any
committee as indicated on the conference website. membership of any professional organization (e.g. Senior
Information about final paper submission is available from the Member IEEE).
conference website. To avoid confusion, the family name must be written as the
last part of each author name (e.g. John A.K. Smith).
II. PAGE LAYOUT Each affiliation must include, at the very least, the name of
An easy way to comply with the conference paper the company and the name of the country where the author is
formatting requirements is to use this document as a template based (e.g. Causal Productions Pty Ltd, Australia).
and simply type your text into it. Email address is compulsory for the corresponding author.

A. Page Layout C. Section Headings

Your paper must use a page size corresponding to A4 which No more than 3 levels of headings should be used. All
is 210mm (8.27") wide and 297mm (11.69") long. The headings must be in 10pt font. Every word in a heading must
margins must be set as follows: be capitalized except for short minor words as listed in
 Top = 19mm (0.75") Section III-B.
 Bottom = 43mm (1.69") 1) Level-1 Heading: A level-1 heading must be in Small
 Left = Right = 14.32mm (0.56") Caps, centered and numbered using uppercase Roman
Your paper must be in two column format with a space of numerals. For example, see heading “III. Page Style” of this
4.22mm (0.17") between columns. document. The two level-1 headings which must not be
numbered are “Acknowledgment” and “References”.
III. PAGE STYLE
All paragraphs must be indented. All paragraphs must be 2) Level-2 Heading: A level-2 heading must be in Italic,
justified, i.e. both left-justified and right-justified. left-justified and numbered using an uppercase alphabetic
letter followed by a period. For example, see heading “C.
A. Text Font of Entire Document Section Headings” above.
The entire document should be in Times New Roman or 3) Level-3 Heading: A level-3 heading must be indented,
Times font. Type 3 fonts must not be used. Other font types in Italic and numbered with an Arabic numeral followed by a
may be used if needed for special purposes. right parenthesis. The level-3 heading must end with a colon.
Recommended font sizes are shown in Table 1. The body of the level-3 section immediately follows the level-
B. Title and Author Details 3 heading in the same paragraph. For example, this paragraph
begins with a level-3 heading.
Title must be in 24 pt Regular font. Author name must be
in 11 pt Regular font. Author affiliation must be in 10 pt D. Figures and Tables
Italic. Email address must be in 9 pt Courier Regular font. Figures and tables must be centered in the column. Large
figures and tables may span across both columns. Any table
TABLE I or figure that takes up more than 1 column width must be
FONT SIZES FOR PAPERS positioned either at the top or at the bottom of the page.
Font Appearance (in Time New Roman or Times) Graphics must not use stipple fill patterns because they may
Size Regular Bold Italic not be reproduced properly. Please use only SOLID FILL
8 table caption (in reference item colors which contrast well both on screen and on a black-and-
Small Caps), (partial) white hardcopy, as shown in Fig. 1.
figure caption,
reference item
9 author email address abstract abstract heading
(in Courier), body (also in Bold)
cell in a table
Fig. 1 A sample line graph using colors which contrast well both on screen
and on a black-and-white hardcopy

Fig. 2 shows an example of a low-resolution image which Fig. 3 Example of an image with acceptable resolution
would not be acceptable, whereas Fig. 3 shows an example of
an image with adequate resolution. Check that the resolution
is adequate to reveal the important detail in the figure. F. Table Captions
Please check all figures in your paper both on screen and on Tables must be numbered using uppercase Roman
a black-and-white hardcopy. When you check your paper on a numerals. Table captions must be centred and in 8 pt Regular
black-and-white hardcopy, please ensure that: font with Small Caps. Every word in a table caption must be
 the colors used in each figure contrast well, capitalized except for short minor words as listed in Section
 the image used in each figure is clear, III-B. Captions with table numbers must be placed before
 all text labels in each figure are legible. their associated tables, as shown in Table 1.
E. Figure Captions G. Page Numbers, Headers and Footers
Figures must be numbered using Arabic numerals. Figure Page numbers, headers and footers must not be used.
captions must be in 8 pt Regular font. Captions of a single
line (e.g. Fig. 2) must be centered whereas multi-line captions H. Links and Bookmarks
must be justified (e.g. Fig. 1). Captions with figure numbers All hypertext links and section bookmarks will be removed
must be placed after their associated figures, as shown in from papers during the processing of papers for publication.
Fig. 1. If you need to refer to an Internet email address or URL in
your paper, you must type out the address or URL fully in
Regular font.

Fig. 2 Example of an unacceptable low-resolution image

I. References Productions has used its best efforts to ensure that the
The heading of the References section must not be templates have the same appearance.
numbered. All reference items must be in 8 pt font. Please
ACKNOWLEDGMENT
use Regular and Italic styles to distinguish different fields as
shown in the References section. Number the reference items The heading of the Acknowledgment section and the
consecutively in square brackets (e.g. [1]). References section must not be numbered.
When referring to a reference item, please simply use the Causal Productions wishes to acknowledge Michael Shell
reference number, as in [2]. Do not use “Ref. [3]” or and other contributors for developing and maintaining the
“Reference [3]” except at the beginning of a sentence, e.g. files which have been used in the preparation of this template.
“Reference [3] shows …”. Multiple references are each .
numbered with separate brackets (e.g. [2], [3], [4]–[6]).
REFERENCES
Examples of reference items of different categories shown
in the References section include: [1] S. M. Metev and V. P. Veiko, Laser Assisted Microtechnology, 2nd ed.,
R. M. Osgood, Jr., Ed. Berlin, Germany: Springer-Verlag, 1998.
 example of a book in [1] [2] J. Breckling, Ed., The Analysis of Directional Time Series:
 example of a book in a series in [2] Applications to Wind Speed and Direction, ser. Lecture Notes in
 example of a journal article in [3] Statistics. Berlin, Germany: Springer, 1989, vol. 61.
[3] S. Zhang, C. Zhu, J. K. O. Sin, and P. K. T. Mok, “A novel ultrathin
 example of a conference paper in [4]
elevated channel low-temperature poly-Si TFT,” IEEE Electron Device
 example of a patent in [5] Lett., vol. 20, pp. 569–571, Nov. 1999.
 example of a website in [6] [4] M. Wegmuller, J. P. von der Weid, P. Oberson, and N. Gisin, “High
 example of a web page in [7] resolution fiber distributed measurements with coherent OFDR,” in
Proc. ECOC’00, 2000, paper 11.3.4, p. 109.
 example of a databook as a manual in [8]
[5] R. E. Sorace, V. S. Reinhardt, and S. A. Vaughn, “High-speed digital-
 example of a datasheet in [9] to-RF converter,” U.S. Patent 5 668 842, Sept. 16, 1997.
 example of a master’s thesis in [10] [6] (2002) The IEEE website. [Online]. Available: http://www.ieee.org/
 example of a technical report in [11] [7] M. Shell. (2002) IEEEtran homepage on CTAN. [Online]. Available:
http://www.ctan.org/tex-
 example of a standard in [12]
archive/macros/latex/contrib/supported/IEEEtran/
[8] FLEXChip Signal Processor (MC68175/D), Motorola, 1996.
IV. CONCLUSIONS [9] “PDCA12-70 data sheet,” Opto Speed SA, Mezzovico, Switzerland.
The version of this template is V2. Most of the formatting [10] A. Karnik, “Performance of TCP congestion control with rate
feedback: TCP/ABR and rate adaptive TCP/IP,” M. Eng. thesis, Indian
instructions in this document have been compiled by Causal Institute of Science, Bangalore, India, Jan. 1999.
Productions from the IEEE LaTeX style files. Causal [11] J. Padhye, V. Firoiu, and D. Towsley, “A stochastic model of TCP Reno
Productions offers both A4 templates and US Letter templates congestion avoidance and control,” Univ. of Massachusetts, Amherst,
for LaTeX and Microsoft Word. The LaTeX templates depend MA, CMPSCI Tech. Rep. 99-02, 1999.
[12] Wireless LAN Medium Access Control (MAC) and Physical Layer
on the official IEEEtran.cls and IEEEtran.bst files, whereas (PHY) Specification, IEEE Std. 802.11, 1997.
the Microsoft Word templates are self-contained. Causal