Kadi Sarva Vishwavidyalaya

Faculty of Engineering & Technology

First Year Bachelor of Engineering (All Branches)
(With Effect From: Academic Year 2017-18)

ENGINEERING GRAPHICS
SUB CODE: CC110-N

Teaching Scheme (Credits and Hours)

Teaching Scheme Evaluation Scheme
Total
L T P Total Theory IE CIA Pract. Total
Credit
Hrs Hrs Hrs Hrs Hrs Marks Marks Marks Marks Marks
3 0 4 7 5 3 70 30 20 30 150

LEARNING OBJECTIVES:
The educational objectives of this course are
 To develop in students graphic skills for communication of concepts, ideas and design
of engineering products and expose them to existing national standards related to
technical drawings.
 Importance of graphics in engineering applications – Use of drafting instruments – BIS
conventions and specifications – Size, layout and folding of drawing sheets – Lettering
and dimensioning.

INSTRUCTIONAL METHOD AND PEDAGOGY (Continuous Internal Assessment (CIA) Scheme)

 At the start of course, the course delivery pattern, prerequisite of the subject will be
discussed
 Lecture may be conducted with the aid of multi-media projector, black board, OHP
etc.
 Attendance is compulsory in lectures and Practical which carries 05 Marks.
 Classroom participation and involvement in solving the problems in Drawing Lab
carries 05 Marks.
 10 Marks given on the basis of Drawing Sheets and Sketch book work.
 Viva Voce will be conducted at the end of the semester of 30 Marks.
 One internal exam of 30 Marks is conducted as a part of mid semester evaluation.
 Experiments shall be performed in the laboratory related to course contents.
 The course includes a laboratory, where students have an opportunity to build an
appreciation for the concept being taught in lectures.

OUTLINE OF THE COURSE:

Page 1 of 5
 Kadi Sarva Vishwavidyalaya
Faculty of Engineering & Technology
First Year Bachelor of Engineering (All Branches)
(With Effect From: Academic Year 2017-18)

Sr. No Unit No. Lecture Hrs. Lab Hrs.

1 Introduction 2 2

2 Scales 0 4

3 Engineering Curves 0 10

4 Loci of Points 7 2

5 Projections of Points & Lines 7 2

6 Projections of Planes 7 2

7 Projections of Solids 7 2

8 Section of Solids 7 2

9 Development of Lateral Surfaces 8 2

10 Orthographic Projections 0 14

11 Isometric Projections and Isometric View or Drawing 0 14

12 Machine Drawing 0 4

Total Hrs. 45 60

Total Hours (Theory): 45

Total Hours (Lab): 60
Total Hours: 105

Page 2 of 5
 Kadi Sarva Vishwavidyalaya
Faculty of Engineering & Technology
First Year Bachelor of Engineering (All Branches)
(With Effect From: Academic Year 2017-18)

DETAILED SYLLABUS

Unit Topics Lectures+L Weigtage

No ab (%)
(Hours)
1. Introduction: Introduction to Engineering Graphics, Drawing instruments
and accessories. Line, Lettering and Dimensioning, Sheet Lay Out and 2+2 3

Sketching,
2. Scales: Types of scales and Representative Fraction, Plane scale, 6
0+4
Diagonal Scale, Vernier Scale, and Scale of Chords.
3. Engineering Curves: Classification of Engineering Curves, Construction of 9
0+10
Conics, Cycloid Curves, Involutes, Spirals and Helix.
4. Loci of Points: Path of the points moving on simple arrangements and
simple mechanisms, slider crank mechanism, four bar chain mechanism 7+2 9

etc.
5. Projections of Points & Lines: Introduction to principal planes of
projections, Projections of the points located in same quadrant and
different quadrants, Projections of line with its inclination to one 7+2 9

reference plane and with two reference planes. True length of the line
and its inclination with the reference planes.
6. Projections of Planes: Concept of different planes, Projections of planes
with its inclination to one reference plane and with two reference 7+2 9
planes. Concept of auxiliary plane method for projections of the plane.
7. Projections of Solids: Classification of solids. Projections of solids like
Cylinder, Cone, Pyramid and Prism with its inclination to one reference 7+2 9

plane and with two reference planes.

8. Section of Solids: Section of Cylinder, Cone, Pyramid and Prism and the
true shape of the section with its inclination to one reference plane and 7+2 9

with two reference planes.

9. Development of Lateral Surfaces: Concept of development of the
different surfaces. Parallel Line Development and Radial Line 9
8+2
Development.

Page 3 of 5
 Kadi Sarva Vishwavidyalaya
Faculty of Engineering & Technology
First Year Bachelor of Engineering (All Branches)
(With Effect From: Academic Year 2017-18)

10. Orthographic Projections: Principle of projection, Principal planes of

projection, Projections from the pictorial view of the object on the
principal planes for View from Front, View from Top and View from Side 0+14 12

using first angle projection method and third angle projection method,
Full Sectional View.
11. Isometric Projections and Isometric View or Drawing: Isometric Scale,
Conversion of orthographic views into isometric projection, isometric 0+14 12
view or drawing.
12. Machine Drawing: Representation of Three Dimensional objects – Need
for and importance of multiple views and their placement – Developing 4
0+4
visualization skills through free hand sketching of multiple views from
pictorial views of objects.
Total 45+60=105 100
STUDENTS LEARNING OUTCOME:

On successful completion of the course

 Be able to sketch engineering components

 Be able to interpret engineering drawings that comply with drawing standards
 Be able to produce engineering drawings

TEXT BOOKS:
 A Text Book of Engineering Graphics By P.J.Shah, S.Chand & Company Ltd., New Delhi
 A Text Book of Machine Drawing By P.J.Shah, S.Chand & Company Ltd., New Delhi
 Elementary Engineering Drawing By N.D.Bhatt, Charotar Publishing House, Anand
 Geometrical and Machine Drawing By N.D.Bhatt, Charotar Publishing House, Anand

REFERENCE BOOKS:
 Engineering Graphics – I and II By Arunoday Kumar, Tech – Max Publication, Pune
 Engineering Drawing & Graphics using Auto CAD 2000 By T. Jeyapoovan, Vikas
Publishing House Pvt. Ltd., New Delhi
 A text book of Engineering Drawing By R.K.Dhawan, S.Chand & Company Ltd., New Delhi
 A text book of Engineering Drawing By P.S.Gill, S.K.Kataria & sons, Delhi

Page 4 of 5
 Kadi Sarva Vishwavidyalaya
Faculty of Engineering & Technology
First Year Bachelor of Engineering (All Branches)
(With Effect From: Academic Year 2017-18)

 Engineering Drawing with an Introduction to AutoCAD By D.A.Jolhe, Tata McGraw-Hill

Publishing Co. Ltd., New Delhi
 Computer Aided Engineering Drawing, S. Trymbaka Murthy, I.K.International Publishing
House Pvt. Ltd., New Delhi

WEB MATERIALS:
 http://www.wikipedia.org

LIST OF DRAWING SHEETS

Sr. No. Title

1 Engineering Curves
2 Loci of Points
3 Projections of Points & Lines
4 Projections of Planes
5 Projections of Solids
6 Section of Solids
7 Development of Lateral Surfaces
8 Orthographic Projections
9 Isometric Projections and Isometric View

Page 5 of 5