Scribd
Upload
2K views1 page

Wood Cutting Machine Checklist: No Items Observation Remarks

This document is a checklist for inspecting a wood cutting machine. It contains sections to check the condition of the cutting machine itself for damage and proper guards/insulation. It also has sections to check the cutting wheel for the appropriate size/RPM and any cracks or damage. Finally it checks the electrical cables and connections for damage, plugs, and proper routing through ELCBS without obstructing walkways. The checklist is to be filled out by a site supervisor or safety manager at the location of the machine.

Uploaded by

Afroz Alam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Wood Cutting Machine Checklist: No Items Observation Remarks

This document is a checklist for inspecting a wood cutting machine. It contains sections to check the condition of the cutting machine itself for damage and proper guards/insulation. It also has sections to check the cutting wheel for the appropriate size/RPM and any cracks or damage. Finally it checks the electrical cables and connections for damage, plugs, and proper routing through ELCBS without obstructing walkways. The checklist is to be filled out by a site supervisor or safety manager at the location of the machine.

Uploaded by

Afroz Alam
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Wood Cutting Machine Checklist

Project Contractor:

Site supervisor: Machine ID

Date: Location

No Items Observation Remarks


A CUTTING MACHINE
1 Any physical damages to the machine?

2 RPM punched/ marked?


3 Guard in place?

4 Double insulated body?


5 Proper size spanner/ key in place?
6 Electrical connection done properly?

7 Is Dead man provided with machine and in working


condition?
8 Handles tightly placed?
B CUTTING WHEEL
1 Appropriate selection of abrasive wheel?

2 Within expiry date?


3 RPM, size and type of the wheel marked?

4 Any cracks/ damps observed in the wheel?


5 Properly stored after use?
Grinding and cutting wheel stored & used
6
accordingly?
C CABLES & CONNECTIONS
1 Cable in proper condition without any damages?
2 Cable with plug tops?

3 Connection used through ELCBS?


Cables routed properly without obstructing the
4
passage ways?

Name of Safety Manager/ Officer Signature

Error! Unknown document property name.

You might also like