Product environmental attributes – THE ECO DECLARATION

The declaration may be published only when all rows and/or fields marked with an * are filled-in (n.a. for not applicable).
Additional information regarding each item may be found under P14.

Brand * Idea Logo

Company name * Lenovo
Contact information * Lenovo Global Environmental Affairs
Alvin L Carter
1009 Think Place
Building 2 / 5F1
Morrisville, North Carolina 27560
[email protected]
Internet site * http://www.lenovo.com/social_responsibility/us/en/environment.html
Additional information The latest version of this document can be found at
http://www.lenovo.com/social_responsibility/us/en/datasheets_notebooks.html

The company declares (based on product specification or test results based obtained from sample testing), that the product
conforms to the statements given in this declaration.
Type of product *
Notebook PC
Commercial name *
Lenovo ideapad 110-14IBR
Model number *
80T6;80UJ
Issue date * 2016-03-10
Intended market * Global Europe Asia, Pacific & Japan Americas Other
Additional information

This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.

Quality Control Requirement met

Item Yes No
QC1 * The company enforces an internal quality control scheme to ensure the correctness of this eco declaration
QC2 * The company is a member of an eco declaration system that enforces regular independent quality control
such as organized by IT-Företagen (see www.itecodeclaration.org).

th
Annex B of ECMA-370 4 edition, June 2009 Page 1 (9)
Model number *
80T6;80UJ
Issue date * 2016-03-10 Logo

Product environmental attributes - Legal requirements Requirement met

Item Yes No n.a.
P1 Hazardous substances and preparations
P1.1* Products do not contain more than; 0.1% lead, 0.01% cadmium, 0.1% mercury, 0.1% hexavalent chromium,
0.1% polybrominated biphenyls (PBB) or 0.1% polybrominated diphenyl ethers (PBDE). (See legal
reference and Note B1)
P1.2* Products do not contain Asbestos (see legal reference).
Comment: Legal reference has no maximum concentration value.
P1.3* Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC),
hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1-
trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum
concentration values.
P1.4* Products do not contain more than; 0.005% polychlorinated biphenyl (PCB), 0.005% polychlorinated
terphenyl (PCT) in preparations (see legal reference).
P1.5* Products do not contain more than 0.1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in the
chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
P1.6* Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS),
Tris-(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (see legal reference).
Comment: Legal reference has no maximum concentration values.
P1.7* Textile and leather parts with direct skin contact do not contain more than 0.003% Azo colorants that split
aromatic amines. (See legal reference and Note B1)
P1.8* Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as
pentachlorophenol and derivatives (see legal reference).
Comment: Legal reference has no maximum concentration values.
P1.9* Parts with direct and prolonged skin contact do not release nickel in concentrations above 0.5
2
microgram/cm /week (see legal reference).
Comment: Max limit in legal reference when tested according to EN1811:1998.
P1.10* REACH Article 33 information about substances in articles is available at (add URL or mail contact):
http://www.lenovo.com/social_responsibility/us/en/materials.html
P2 Batteries
P2.1* If the product contains a battery or an accumulator, it is labeled with the disposal symbol and if it contains
more than 0.0005% of mercury (for button cells only) by weight, or more than 0.004% of lead, it shall be
marked with the chemical symbol for the metal concerned, Hg or Pb. Information on proper disposal is
provided in user manual. (See legal reference)
P2.2* Button cells used in the product do not contain more than 2% by weight of mercury. Other batteries or
accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. (See legal reference)
P2.3* Batteries and accumulators are easily removable by either users or service providers (as dependent on the
design of the product). Exception: Batteries that are permanently installed for safety, performance, medical
or data integrity reasons do not have to be “easily removable”. (See legal reference)
P3 Safety, EMC connection to the telephone network and labeling
P3.1* The product complies with legally required safety standards as specified (see legal reference).
P3.2* The product complies with legally required standards for electromagnetic compatibility (see legal reference).
P3.3* If product is intended for connection to a public telecom network or contains a radio transmitter, it complies
with legally required standards for radio and telecommunication devices (see legal reference).
P3.4* The product is labeled to show conformance with applicable legal requirements (see legal reference).
P4 Consumable materials
P4.1* If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium max 0.01% (see
legal reference and Note B1).
P4.2* If ink/toner is used in the product, it does not contain cadmium max 0.1% by weight (see legal reference).
P4.3* If the ink/toner formulation/preparation is classified as hazardous according to applicable regulations, the
product/packaging is adequately labeled and a Safety Data Sheet (SDS) in accordance with these
requirements is available (see legal reference).
P5 Product packaging
P5.1* Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and
hexavalent chromium by weight of these together.
P5.2* Plastic packaging material is marked according to ISO 11469 referring ISO 1043 (see legal reference).
P5.3* The product packaging material is free from ozone depleting substances as specified in the Montreal
Protocol (see legal reference).
Comment: Legal reference has no maximum concentration values.

Note B1: Restriction applies to the homogeneous material, unless other specified and expressed in weight %.

th
Annex B of ECMA-370 4 edition, June 2009 Page 2 (9)
Model number *
80T6;80UJ
Issue date * 2016-03-10 Logo

Product environmental attributes - Market requirements - Environmental conscious design Requirement met
Item *=mandatory to fill in. Additional information regarding each item may be found under P14. Yes No n.a.
P6 Treatment information
P6.1* Information for recyclers/treatment facilities is available (see legal reference).
P7 Design
Disassembly, recycling
P7.1* Parts that have to be treated separately are easily separable
P7.2* Plastic materials in covers/housing have no surface coating.
P7.3* Plastic parts >100g consist of one material or of easily separable materials.
P7.4* Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043.
P7.5 Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6* Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
Product lifetime
P7.7* Upgrading can be done e.g. with processor, memory, cards or drives
P7.8* Upgrading can be done using commonly available tools
P7.9. Spare parts are available after end of production for: 5 years
P7.10 Service is available after end of production for: 5 years
Material and substance requirements
P7.11* Product cover/housing material type:
Material type: PC+ABS-FR(40) Material type: Material type:
P7.12 Electrical cable insulation materials of power cables are PVC free.
P7.13 Electrical cable insulation materials of signal cables are PVC free
P7.14 All cover/housing plastic parts >25g are free from chlorine and bromine.
P7.15 All printed circuit boards (without components) >25g are halogen free. as defined in IEC61249-2-21. (See
Note B2)
P7.16 Flame retarded plastic parts >25g in covers / housings are marked according ISO 1043-4:
Marking: FR(40)
P7.17 Alt. 1
Chemical specifications of flame retardants in printed circuit boards >25g (without components):
TBBPA (additive) , TBBPA (reactive) , Other; chemical name: , CAS #:

Alt. 2
Chemical specifications of flame retardants in printed circuit boards (without components) >25g according
ISO 1043-4: Brominated Epoxy Resin See P14
P7.18 Alt. 1
Flame retarded plastic parts >25g contain the following flame retardant substances/preparations in
concentrations above 0.1%:
Comment: No legal limits exist, this is a market requirement.
1. Chemical name: , CAS #:
2. Chemical name: , CAS #:
3. Chemical name: , CAS #:
Alt. 2
Chemical specifications of flame retardants in plastic parts >25g according ISO 1043-4:
FR(40)
P7.19 Plastic parts >25g are free from flame retardant substances/ preparations above 0.1% classified as R45,
R40, R46, R48, R50, R51, R53, R60, R61 and any combination of these (See Note B3)
P7.20 Of total plastic parts’ weight >25g, recycled material content is 6.2%.
P7.21 Of total plastic parts’ weight >25g, biobased material content is 0%.
P7.22 Light sources are free from mercury
If mercury is used specify: Number of lamps: and max. mercury content per lamp: mg
P8 Batteries
P8.1* Battery chemical composition: Lithium Ion/Lithium Manganese Dioxide
P8.2 Batteries meet the requirements of the following voluntary program/s: US RBRC

Note B2: IEC61249-2--21 has maximum limits for chlorine and bromine but does not address fluorine, iodine and astatine
which are included in the group of halogens.
Note B3: 'Starting from January 2009, Risk phrases can be replaced by Hazard phrases according to the Globally
Harmonized System (GHS), mandatory by December 2010.

th
Annex B of ECMA-370 4 edition, June 2009 Page 3 (9)
 Model number *
80T6;80UJ
Issue date * 2016-03-10 Logo

Product environmental attributes - Market requirements (continued) Requirement met

Item Yes No n.a.
P9 Energy consumption
9.1 For the product the following power levels or energy consumptions are reported: See P14
Energy mode * Power level at Power level at Power level at Reference / Standard for energy modes and test
100 V AC 115 V AC 230 V AC method *
Peak (On-max) 45 W 45 W 45 W Full load

Category I1
Short Idle State - WOL Enabled 7.36 W 7.30 W 7.48 W Use for ENERGY STAR V6 registration (Pidle)
Long Idle State - WOL Enabled 6.04 W 6.01 W 6.15 W Use for ENERGY STAR V6 registration (Pidle)
Sleep (S3) - WOL Enabled 0.41 W 0.41 W 0.43 W Use for ENERGY STAR V6 registration(Psleep)
Sleep (S3) - WOL Disabled 0.41 W 0.41 W 0.43 W Reference
Off (S5) - WOL Enabled 0.17 W 0.16 W 0.19 W Use for ENERGY STAR V6 registration(Poff)
Off (S5) - WOL Disabled 0.17 W 0.16 W 0.19 W Use for EuP

Category D 1/2
Short Idle State - WOL Enabled W W W Use for ENERGY STAR V6 registration (Pidle)
Long Idle State - WOL Enabled W W W Use for ENERGY STAR V6 registration (Pidle)
Sleep (S3) - WOL Enabled W W W Use for ENERGY STAR V6 registration (Psleep)
Sleep (S3) - WOL Disabled W W W Reference
Off (S5) - WOL Enabled W W W Use for ENERGY STAR V6 registration(Poff)
Off (S5) - WOL Disabled W W W Use for EuP
EPS No-load 0.076 W 0.078 W 0.079 W
(External power supply / charger
plugged in the wall outlet but
disconnected from the product.)

PTEC * W W W
Typical Energy Consumption

TEC * kWh/week
Typical Energy Consumption kWh/week kWh/week

ETEC * 26.26 kWh/year 26.06 26.78 ETEC = (8760/1000) x (Poff x 0.25 + Psleep x 0.35
Annual Energy Consumption kWh/year kWh/year + Pshort idle x 0.3+ Plong idle x 0.1)

Poff: Off Mode(S5) - WOL Enabled; Psleep: Sleep Mode(S3) - WOL Enabled; Pidle: Idle State - WOL Enabled
Display resolution* : 1920*1080 Megapixels
Print Speed * : Images per minute
Default time to enter energy save mode: 25 minutes
P9.2* Information about the energy save function is provided with the product.
P9.3* The product meets the energy requirements of the following voluntary program/s:
ENERGY STARÒ version: Version 6.1 Tier: Product category: A
Others specify:
P10 Emissions
Noise emission – Declared according to ISO 9296
P10.1 Mode Mode description Declared Declared A-weighted
A-weighted sound pressure level L pAm (dB)
sound power
level LWAd (B) Operator position Bystander positions
Desktop
(only if product is not
or Desk side
operator attended)
Idle * HDD:Idle * 2.7 18.5
Operation * HDD: Operating * 2.7 18.8
Other mode
Measured according to: ISO7779 ECMA-74
Other (only if not covered by ECMA-74 with LpAm measurement distance m)
P10.2 The product meets the acoustic noise requirements of the following voluntary program/s:

th
Annex B of ECMA-370 4 edition, June 2009 Page 4 (9)
 Model number *
80T6;80UJ
Issue date * 2016-03-10 Logo

Product environmental attributes - Market requirements (continued) Requirement met

Item Yes No n.a.
P9 Energy consumption
9.1 For the product the following power levels or energy consumptions are reported: See P14
Energy mode * Power level at Power level at Power level at Reference / Standard for energy modes and test
100 V AC 115 V AC 230 V AC method *
Peak (On-max) 45 W 45 W 45 W Full load

Category I2
Short Idle State - WOL Enabled 7.51 W 7.55 W 7.79 W Use for ENERGY STAR V6 registration (Pidle)
Long Idle State - WOL Enabled 6.03 W 6.04 W 6.20 W Use for ENERGY STAR V6 registration (Pidle)
Sleep (S3) - WOL Enabled 0.38 W 0.39 W 0.43 W Use for ENERGY STAR V6 registration(Psleep)
Sleep (S3) - WOL Disabled 0.38 W 0.39 W 0.43 W Reference
Off (S5) - WOL Enabled 0.16 W 0.17 W 0.20 W Use for ENERGY STAR V6 registration(Poff)
Off (S5) - WOL Disabled 0.16 W 0.17 W 0.20 W Use for EuP

Category D 1/2
Short Idle State - WOL Enabled W W W Use for ENERGY STAR V6 registration (Pidle)
Long Idle State - WOL Enabled W W W Use for ENERGY STAR V6 registration (Pidle)
Sleep (S3) - WOL Enabled W W W Use for ENERGY STAR V6 registration (Psleep)
Sleep (S3) - WOL Disabled W W W Reference
Off (S5) - WOL Enabled W W W Use for ENERGY STAR V6 registration(Poff)
Off (S5) - WOL Disabled W W W Use for EuP
EPS No-load 0.076 W 0.078 W 0.079 W
(External power supply / charger
plugged in the wall outlet but
disconnected from the product.)

PTEC * W W W
Typical Energy Consumption

TEC * kWh/week
Typical Energy Consumption kWh/week kWh/week

ETEC * 26.53 kWh/year 26.70 27.66 ETEC = (8760/1000) x (Poff x 0.25 + Psleep x 0.35
Annual Energy Consumption kWh/year kWh/year + Pshort idle x 0.3+ Plong idle x 0.1)

Poff: Off Mode(S5) - WOL Enabled; Psleep: Sleep Mode(S3) - WOL Enabled; Pidle: Idle State - WOL Enabled
Display resolution* : 1920*1080 Megapixels
Print Speed * : Images per minute
Default time to enter energy save mode: 25 minutes
P9.2* Information about the energy save function is provided with the product.
P9.3* The product meets the energy requirements of the following voluntary program/s:
ENERGY STARÒ version: Version 6.1 Tier: Product category: A
Others specify:
P10 Emissions
Noise emission – Declared according to ISO 9296
P10.1 Mode Mode description Declared Declared A-weighted
A-weighted sound pressure level L pAm (dB)
sound power
level LWAd (B) Operator position Bystander positions
Desktop
(only if product is not
or Desk side
operator attended)
Idle * HDD:Idle * 2.7 18.5
Operation * HDD: Operating * 2.7 18.8
Other mode
Measured according to: ISO7779 ECMA-74
Other (only if not covered by ECMA-74 with LpAm measurement distance m)
P10.2 The product meets the acoustic noise requirements of the following voluntary program/s:

th
Annex B of ECMA-370 4 edition, June 2009 Page 5 (9)
Model number *
80T6;80UJ
Issue date * 2016-03-10 Logo

Product environmental attributes - Market requirements (continued) Requirement met

Item Yes No n.a.
Chemical emissions from printing products
P10.3* Test performed according to ECMA-328 (ISO/IEC 28360) standard , other specify:
P10.4 Typical emission rate (print phase) is (mg/h):
Dust Ozone Styrene Benzene TVOC
P10.5 Chemical emission requirements of the following voluntary program/s are met for :
Dust Ozone Styrene Benzene TVOC
Electromagnetic emissions
P10.6 Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary
program/s: MPR-II
P11 Consumable materials for printing products
P11.1* A Safety Data Sheet (SDS) is available for the ink/toner preparation, even if not legally required (see P4.3).
P11.2* Paper containing post-consumer recycled fibers can be used, provided that it meets the requirements of
EN12281.
P11.3* 2-sided (duplex) printing/copying is an integrated product function.
P12 Ergonomics for computing products
P12.1* The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
P12.2* The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
P13 Packaging and documentation
P13.1* Product packaging material type(s): Corrugated Carton weight (kg): 0.295
Product packaging material type(s): Polyethylene Cushions weight (kg): 0.0485
Product packaging material type(s): Others weight (kg): 0.123
P13.2* Product plastic packaging is free from PVC.
P13.3* Specify media for user and product documentation (tick box):
Electronic , Paper , Other
P13.4* For paper user and product documentation, please specify contained percentage of post-consumer recycled
fiber: 0%
P14 Additional information (See Note B4)
NOTE: Supplier makes no representations, guarantees, assurances or warranties whether express or implied, regarding the
information contained in this document. All information provided by supplier in this document is provided based on supplier’s
knowledge available at the time of completion, and supplier shall have no obligation to update such information. The information
provided here is approximate and provided for informational purposes only. See a Lenovo Account Representative for more
information.
P9 See Energy Star Qualified Notebooks & Tablet Computers for the latest information:
http://www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=CO

Note B4: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and
hitting the <Enter> key.

th
Annex B of ECMA-370 4 edition, June 2009 Page 6 (9)
Legal references Europe Annex B
Reference Declaration item
2002/95/EC (ROHS Directive) P1.1, P4.1
REACH, Annex XVII P1.6, P1.8, P4.2
REACH, Annex XVII P1.4
REACH, Annex XVII P1.2
REACH, Annex XVII P1.7
REACH, Annex XVII P1.9
Regulation (EC) No. 2037/2000, 2038/2000, 2039/2000 P1.3
Norwegian regulation relating to restrictions on the use P1.5
of certain dangerous chemicals 20.12.2002
2006/66/EC (Battery and accumulators Directive) P2.1, P2.2, P2,3, P3.4, P8.1
2006/95/EC (Low Voltage Directive) P3.1, 3.4
2004/108/EEC (New EMC Directive) P3.2, 3.4
1999/5/EC (R&TTE Directive) P3.3, 3.4
“REACH" Regulation (1907/2006), annex VII P1.10
(EC) No.1272/2008 regulation on classification, labeling P4.3
and packaging (CLP)
REACH article 31, annex II P4.3
2004/12/EC (Directive on packaging and packaging P5.1
waste)
(97/129/EC) (Commission Decision on Identification P5.2
System for Packaging Materials
2037/2000/EC Regulation on Substances that Deplete P5.3
the Ozone Layer
2002/96/EC (WEEE directive) P3.4, P6.1
(EC) No.1272/2008 regulation on classification, labeling P7.19
and packaging (CLP)

th
Annex B of ECMA-370 4 edition, June 2009 Page 7 (9)
 Lenovo ErP Lot3 Information Sheet
- PC / Notebook -
As required by COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive
2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for
computers and computer servers (ErP Lot3).

Products scope of this sheet:

Desktop computer, integrated desktop computer, and notebook computer

This document is only valid in connection with the IT Eco Declaration of the specific Product.

Commercial name Lenovo ideapad 110-14IBR Logo

Model Number 80T6;80UJ

Issue Date 2016-03-10

Additional information

P7.1.1 Product environmental attributes

(d) year of manufacture:

2014
(e) E TEC value (kWh) per ErP Lot 3 Category and capability adjustments applied when all discrete
graphics cards (dGfx) are disabled and if the system is tested with switchable graphics mode with
UMA driving the display:

Category (according to ErP Lot 3): A Etec: 17.70

(f) E TEC value (kWh) per ErP Lot 3 Category and capability adjustments applied when all discrete
graphics cards (dGfx) are enabled:

Category (according to ErP Lot 3): NA Etec:

(g) idle state power demand (Watts);

6.21

(h) sleep mode power demand (Watts);

0.38

(i) sleep mode with WOL enabled power demand (Watts) (where enabled);
0.38

(j) off mode power demand (Watts);

0.20

(k) off mode with WOL enabled power demand (Watts) (where enabled);
0.20

(l) internal power supply efficiency at 10 %, 20 %, 50 % and 100 % of rated output power (if applicable):
10% 20% 50% 100% Average

(m) external power supply efficiency (if applicable):

Average 45W:88.40%;88.64%;88.53%;

*internal note: show values for all available external power supplies
(o) the minimum number of loading cycles that the batteries can withstand (applies only to notebook computers):
300 cycles

(p-1) the measurement methodology used to determine information mentioned in points (l) – internal PSU
efficiency:
NA

(p-2) the measurement methodology used to determine information mentioned in points (m) – external PSU
efficiency:
Energy-star requirement

(p-3) the measurement methodology used to determine information mentioned in points (o) – loadingcycles
batteries:
IEC 61960 measurement methodology

th
Annex B of ECMA-370 4 edition, June 2009 Page 8 (9)
(p-4) the measurement methodology used to determine information mentioned in maximum, idle, sleep, off mode
power as defined in Point P9.1 in the Product IT Eco Declaration:

IEC 62623 / IEC EN50564:2011 measurement methodology

(q) sequence of steps for achieving a stable condition with respect to power demand::

EC 62623 / IEC EN50564:2011 measurement methodology

(r) description of how sleep and/or off mode was selected or programmed:

Based on user manual

(s) sequence of events required to reach the mode where the equipment automatically changes to sleep and/or
off mode:

Based on user manual

(t) the duration of idle state condition before the computer automatically reaches sleep mode, or another
25
condition which does not exceed the applicable power demand requirements for sleep mode (in minutes):
(u) the length of time after a period of user inactivity in which the computer automatically reaches a power mode
NA
that has a lower power demand requirement than sleep mode (in minutes):
(v) the length of time before the display sleep mode is set to activate after user inactivity (in minutes): 10
(w) information on the energy-saving potential of power management functionality:

Based on user manual

(x) user information on how to enable the power management functionality:

Based on user manual

(z) test parameters for measurements: — test voltage in V and frequency in Hz, — total harmonic distortion of the
electricity supply system, — information and documentation on the instrumentation, set-up and circuits used
for electrical testing:

230V/50Hz, Total Harmonic Distortion <2 %

Addition Notebook Battery Information:

Yes No n/a This notebook computer is operated by battery/ies that cannot be accessed and
replaced by a non-professional user.
(Battery not user (Battery user
replaceable) replaceable) The battery[ies] in this product cannot be easily replaced by
users themselves

Additional information

th
Annex B of ECMA-370 4 edition, June 2009 Page 9 (9)