D-Vo

MARELLI MOTORI DIGITAL AVR

The new Digital Voltage Regulator D-Vo is an electronic

microprocessor-based device which manages the
operating electrical parameters of synchronous
generators. The power supply to the exciter is through a
PWM power stage.
The D-Vo AVR can be interfaced and programmed using the
standard Modbus communication protocol and a proprietary
PC application supplied by Marelli Motori.
The new D-Vo regulator is a standard feature of all
generators ≥800 frame size and all HV (std) generators,
it is also compatible with any Marelli Motori generator.

FUNCTIONS AND KEY FEATURES INPUTS

 4 Operating modes:  1-ph or 3-ph generator voltage sensing
 Automatic Voltage Regulation (AVR mode)  1-ph or 3-ph generator current sensing
 Power Factor Regulation (PF mode)
 1-ph grid voltage sensing
 Reactive Power Regulation (VAR mode)
 Field Current Regulation (FCR mode)  3 auxiliary analogue inputs for remote setpoint control
 Input for external potentiometer
 Stability parameters individually configurable (P.I.D.)
 9 digital contacts (8 programmable)
or pre-defined standard parameterization

 Soft start with adjustable ramp, in AVR mode

 Parallel function with similar generators operated with OUTPUTS

Reactive Droop Compensation
 PWM output max. 10A continuous, 20A forcing for 10s
 Generator protections:  3 configurable output relays for alarm and FRT
 Field over-voltage
 Field over-current
 Generator over-voltage
 Generator under-voltage FRT
 Generator over-current
 Loss of sensing The D-Vo is equipped with a Fault Ride Through (FRT)
 Diode monitoring function that allows to detect the Low Voltage Ride Through
(LVRT) or the High Voltage Ride Through (HVRT) and
 Excitation limiters (over- and under-excitation)
provides a dynamic support of reactive current
 Watchdog during the event.
FRT Management options available:
 Under-frequency limiter  Standard
 AVR mode
 FRT detection and management

 Certifications:
 CE
 UL
 Grid code: compliant with VDE-AR-N-4110

COMBROAVR002_= 02/2019
PRODUCT SPECIFICATION

POWER SUPPLY GENERATOR CURRENT SENSING

TECHNOLOGY Digital INPUTS 3 (6 terminals) for U-V-W phase sensing
Single phase
CONNECTION TYPE CURRENT RANGE
1Aac (50/60Hz)
Three phase OF EACH INPUT
Shunt
Auxiliary winding
POWER SOURCE PMG
REGULATION ACCURACY
Separate AC source
AVR MODE ±0.25% of rated voltage
Separate DC source
FCR MODE ±2% of rated exciter current
AC: up to 250Vac (50Hz to 400Hz)
±0.005PF
VOLTAGE RANGE DC: up to 300Vdc PF MODE
(with PF between 0.9 lagging and 0.9 leading)
Voltage build-up: 5Vac VAR MODE ±2% of rated power
VOLTAGE MATCHING ±2% of rated voltage
CONTROL SUPPLY
Single phase
CONNECTION TYPE
Three phase
ENVIRONMENTAL CONDITIONS
Shunt
OPERATING TEMPERATURE -30°C to +70°C
Auxiliary winding
STORAGE TEMPERATURE -40°C to +80°C
POWER SOURCE PMG
HUMIDITY <90%
Separate AC source
DIMENSIONS 335 x 190 x 60 (mm)
Separate DC source
AC: 24Vac to 250Vac (50Hz to 400Hz)
VOLTAGE RANGE
DC: 24Vdc to 300Vdc
EMC
IMMUNITY IEC 61000-6-2
GENERATOR VOLTAGE SENSING
EMISSIONS IEC 61000-6-4
Single phase
CONNECTION TYPE Burst: IEC 61000-4-4
Three phase
Surge: IEC 61000-4-4
VOLTAGE RANGE AC: 100Vac to 480Vac ±15%, at 50/60Hz
ESD: IEC 61000-4-2
Conducted immunities LF: IEC 60945
GRID VOLTAGE SENSING TESTED ACCORDING TO Conducted immunities HF: IEC 61000-4-6
THE FOLLOWING
CONNECTION TYPE Single phase STANDARDS Radiated immunities HF: IEC 61000-4-3
VOLTAGE RANGE AC: 100Vac to 480Vac ±15%, at 50/60Hz Radiated emissions: CISPR 16, CISPR 11
Single-phase Conducted emissions: CISPR 16, CISPR 11
VOLTAGE SENSING
220Vac to 480Vac at 50Hz/60Hz Power interruptions: IEC 61000-4-11
OF THE GRID
Frequency operating range 10Hz to 80Hz Voltage variation: IEC 61000-4-11

USER INTERFACE CONTACTS

 1 USB port for connection to PC with Marelli Motori Marelli Motori S.p.A. Marelli Motori Asia Sdn Bhd
proprietary software or custom software Via Sabbionara 1 Lot 1-8, Persiaran Jubli Perak,
36071 Arzignano (VI) - Italy Seksyen 22, 40300 Shah Alam,
 1 Ethernet port for connection to PC with Marelli Motori (T) +39 0444 479 711 Selangor D.E. - Malaysia
proprietary software or custom software (F) +39 0444 479 888 (T) +60 355 171 999
[email protected] (F) +60 355 171 883
 Communication protocol: Modbus RTU (USB), Modbus
[email protected]
TCP/IP (Ethernet)

marellimotori.com