Scribd Logo
Upload

Welcome to Scribd!

  • 44 views

    Manual

    Uploaded by

    cun
    This document introduces a service manual for maintaining and repairing a machine. It explains that the manual is intended for experienced technicians and provides technical information and procedures. It notes additional references that may be useful and describes the composition of the manual, including different sections and page numbering conventions. It also defines safety symbols and units that are used in the manual.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Manual

    Uploaded by

    cun
    44 views2 pages
    This document introduces a service manual for maintaining and repairing a machine. It explains that the manual is intended for experienced technicians and provides technical information and procedures. It notes additional references that may be useful and describes the composition of the manual, including different sections and page numbering conventions. It also defines safety symbols and units that are used in the manual.

    Original Description:

    Manual

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document introduces a service manual for maintaining and repairing a machine. It explains that the manual is intended for experienced technicians and provides technical information and procedures. It notes additional references that may be useful and describes the composition of the manual, including different sections and page numbering conventions. It also defines safety symbols and units that are used in the manual.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    44 views2 pages

    Manual

    Uploaded by

    cun
    This document introduces a service manual for maintaining and repairing a machine. It explains that the manual is intended for experienced technicians and provides technical information and procedures. It notes additional references that may be useful and describes the composition of the manual, including different sections and page numbering conventions. It also defines safety symbols and units that are used in the manual.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    INTRODUCTION

    TO THE READER

    • This manual is written for an experienced technician • If you have any questions or comments, at if you
    to provide technical information needed to maintain found any errors regarding the contents of this
    and repair this machine. manual, please contact using “Service Manual
    Revision Request Form at the end of this man-
    • Be sure to thoroughly read this manual for correct ual.
    product information and service procedures. (Note: Do not tear off the form. Copy it for us-
    age.):
    Publications Marketing & Product Support
    Hitachi Construction Machinery Co. Ltd.
    TEL: 81-298-32-7173
    FAX: 81-298-31-1162

    ADDITIONAL REFERENCES

    • Please refer to the materials listed below in addition • Operation Manual of the Engine
    to this manual. • Parts Catalog of the Engine
    • Hitachi Training Material
    • The Operator’s Manual
    • The Parts Catalog

    MANUAL COMPOSITION

    • This manual consists of three portions: the Techni- • Information included in the Technical Manual
    cal Manual (Operational Principle), the Technical (Troubleshooting):
    Manual (Troubleshooting) and the Workshop Man- technical information needed for operational per-
    ual. formance tests, and troubleshooting procedures.

    • Information included in the Technical Manual • Information included in the Workshop Manual:
    (Operational Principle): technical information needed for maintenance
    technical information needed for redeliver and and repair of the machine, tools and devices
    delivery, operation and activation of all devices needed for maintenance and repair, maintenance
    and systems. standards, and removal/installation and assem-
    ble/disassemble procedures.

    PAGE NUMBER

    • Each page has a number, located on the center


    lower part of the page, and each number contains
    the following information:

    Example : T 1-3-5

    Consecutive Page Number for Each Group


    Group Number
    Section Number
    T: Technical Manual W: Workshop Manual

    IN-01
    INTRODUCTION
    SAFETY ALERT SYMBOL AND HEADLINE
    NOTATIONS

    In this manual, the following safety alert symbol and • CAUTION:


    signal words are used to alert the reader to the Indicated potentially hazardous situation which
    potential for personal injury of machine damage. could, if not avoided, result in personal injury or
    death.
    This is the safety alert symbol. When you see this
    symbol, be alert to the potential for personal injury. • IMPORTANT:
    Never fail to follow the safety instructions prescribed Indicates a situation which, if not conformed to the
    along with the safety alert symbol. instructions, could result in damage to the machine.
    The safety alert symbol is also used to draw attention
    to component/part weights.
    To avoid injury and damage, be sure to use appropri- • NOTE:
    ate lifting techniques and equipment when lifting heavy Indicates supplementary technical information or
    parts. know-how.

    UNITS USED
    2
    • SI Units (International System of Units) are used in Example : 24.5 MPa (250 kgf/cm , 3560 psi)
    this manual.
    MKS system units and English units are also A table for conversion from SI units to other system
    indicated in parenthheses just behind SI units. units is shown below for reference purposees.

    To Convert To Convert
    Quantity Into Multiply By Quantity Into Multiply By
    From From
    2
    Length mm in 0.03937 Pressure MPa kgf/cm 10.197
    mm ft 0.003281 MPa psi 145.0
    L US gal 0.2642 Power kW PS 1.360
    Volume L US qt 1.057 kW HP 1.341
    3 3
    m yd 1.308 Temperature °C °F °C×1.8+32
    Weight kg lb 2.205 Velocity km/h mph 0.6214
    -1
    Force N kgf 0.10197 min rpm 1.0
    N lbf 0.2248 Flow rate L/min US gpm 0.2642
    Torque N⋅m kgf⋅m 1.0197 mL/rev cc/rev 1.0
    N⋅m lbf⋅ft 0.7375

    IN-02

    You might also like