Recommended Practices for

Safety and Health Programs

Crosswalk to Existing OSHA
Standards

T his crosswalk serves two purposes. First, OSHA standards that

apply to your workplace may contain requirements that are similar
to the action items described in the Recommended Practices for
General Industry Standards
• Process Safety Management of Highly Hazardous Chemicals:
1910.119
Safety and Health Programs (requirements that overlap with the core
elements of Management Leadership, Worker Participation, Hazard • Hazardous Waste Operations and Emergency Response:
1910.120
Identification and Assessment, Education and Training, etc.). As a
result, if you are complying with existing standards you are probably • Respiratory Protection: 1910.134
already doing some of the things you would need to do to implement • Confined Space: 1910.146
a safety and health program. Second, establishing a safety and health • Lockout/Tagout: 1910.147
program as described in these recommended practices will help • Welding, Cutting and Brazing: 1910.251 – 255 (Subpart Q)
you more effectively comply with those safety and health standards • Bloodborne Pathogens: 1910.1030
that apply to you. This will occur as you implement, as part of your
• Hazard Communication: 1910.1200
program, effective procedures for identifying and mitigating hazards,
involving workers in finding solutions, and conducting reviews to Construction Standards
ensure controls are working and safety and health is improving.
• General Provisions: 1926.20 – 34 (Subpart C)
(It is important to note, however, that complying with existing • Hazard Communication: 1926.59
standards is not evidence that an effective Safety and Health Program
• Lead in Construction: 1926.62
is in place. While regulatory compliance is important, the program
described in the recommended practices goes beyond compliance • Process Safety Management: 1926.64
to become the overarching framework for identifying and controlling • Hazardous Waste Operations and Emergency Response:
hazards, ensuring participation and communication, and achieving 1926.65
both safety and health and other organizational goals.) • Respiratory Protection: 1926.104
This crosswalk identifies overlapping requirements in existing • Welding and Cutting: 1926.350 – 354 (Subpart J)
standards that you can build on as you begin implementing these • Fall Protection: 1926.501 – 503 (Subpart M)
recommended practices. Standards that are “programmatic” in • Asbestos: 1926.1101
nature contain considerable overlap. For example, the Construction • Confined Spaces: 1926 Subpart Aa
General Provisions standard (1926.20) requires employers to
maintain “accident prevention programs” that include “frequent The tables that follow – one for General Industry and one for
and regular inspections of the job sites, materials, and equipment” Construction – identify specific paragraphs of some of the most
by “competent persons.” The related training provisions (1926.21) widely applicable existing standards and regulations that may be
require employers to instruct employees in the “recognition and relevant when implementing each core element of the Recommended
avoidance of unsafe conditions” and in the “regulations applicable to Practices for Safety and Health Programs. Referring to these
his work environment” to “control or eliminate any hazards or other paragraphs and identifying the steps you have already taken to
exposure to illness or injury.” These align closely with action items comply with them will help you determine what additional steps you
identified under the hazard identification and education and training need to take to fully implement each core element.
core elements in the recommended practices. Note: State Plans have and enforce their own occupational safety
If you are covered by such standards you may find implementing and health standards that are required to be at least as effective as
a safety and health program easier and more intuitive. While not a OSHA’s. More information about State Plans is available at: http://
comprehensive list, examples of such standards may include: www.osha.gov/dcsp/osp/index.html

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table A. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in General Industry Workplaces*

Relationship to Recommended Practices Core Elements

Hazard Identification and Hazard Prevention and Program Evaluation and
Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Injuries and Illnesses 1904.32(b)(3) 1904.35
1904
Recording and reporting of
occupational injuries and
illness.
Ladders 1910.25(d)(1)x) 1910.25
910.25 – 27 1910.26(c)(2) (vi) 1910.26(c)&(d)
Inspection and safe use 1910.27(f) 1910.27(f)
requirements for portable
wooden ladders, portable
metal ladders, and fixed
ladders.
Process Safety 1910.119(l)(2) (v) 1910.119(c), (e)(4), (m)(3) 1910.119(d), (e), (i), (j)(4), (j) 1910.119(e) (3) (iii), (e)(5), (f), 1910.119(g), (h)(3)(i), (i)(2)(iv), 1910.119(e) (6), (f)(3), (m) 1910.119(h), (l)(3), (m)(3),
Management (6)(ii), (l), (m), (n) (j)(5), (k), (m)(5) (j)(3), (5), (o)
1910.119
To prevent or minimize
the consequences of a
catastrophic chemical
release. Applies to chemicals
above specified threshold
quantities, and extremely
flammable gases or liquids
not used for fuel.

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table A. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in General Industry Workplaces*

Relationship to Recommended Practices Core Elements

Hazard Identification and Hazard Prevention and Program Evaluation and
Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Chemical Emergencies 1910.38(b) 1910.38(e)
Emergency Action Plans
1910.38
Applies to emergency
evacuation. 1910.120(q)(1)&(2) 1910.120(q)(3) 1910.120(q)(4) – (8) 1910.120(q)(2)(x) 1910.120(q)(3), (5)

HAZWOPER Emergency
Response
1910.120(q)
Applies when employees
will be directed to respond
to uncontrolled chemical
releases.
Personal Protective 1910.132(d) 1910.133 1910.132(f)
Equipment (PPE) 1910.137(c)(2) (ii), & (xii) 1910.134
Subpart I (1910.132 – 138) 1910.138(b) 1910.135
To ensure PPE (gloves, 1910.136
footwear, hardhats, etc.) 1910.137(c)
is properly selected and 1910.138
used. (See separate table
entry below for Respiratory
Protection).
Respiratory Protection 1910.134(d) 1910.134(a), (c), (e) – (j) 1910.134(k) 1910.134(l)
1910.134
To ensure protection from
inhalation hazards and safe
use of respirators.

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table A. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in General Industry Workplaces*

Relationship to Recommended Practices Core Elements

Hazard Identification and Hazard Prevention and Program Evaluation and
Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Confined Space Entry 1910.146(d)(8) & (e) 1910.146(l) 1910.146(c)(1), (c)(2), (c)(4), 1910.146(c)(3), (c)(4) 1910.146(g), (h)(1), (i)(1)&(2), 1910.146(d)(13)&(14) 1910.146(c) (8)&(9)
1910.146 (c)(6), (d)(2), (d)(5) (k)(2)
To protect employees
entering spaces that
may contain a hazardous
atmosphere or other serious
hazard.
Lockout/Tagout 1910.147(c)(4) (ii))(C), (f)(3) 1910.147(c) (6)(i), (c)(8)&(9) 1910.147(c)(4) (ii)(D), (c)(6), 1910.147(c)(4), (d), (e)&(f) 1910.147(c)(1), (7) 1910.147(c) (6)(i) 1910.147(f)(2)
1910.147 (ii)(A)
To prevent accidental startup
or release of stored energy
during machine or equipment
servicing.
Powered Industrial Trucks 1910.178(q)(7) 1910.178(e) – (k), (m) - (q) 1910.178(l)
1910.178
Applies design, maintenance,
and use of forklifts and
similar vehicles.
Welding/Hot Work 1910.252(a)(2) (iv), (vi) 1910.252(a)(2) (iv); 1910.252 1910.252(a)(2) (iii)(B) & (xiii) 1910.252(a) (2)(xiii)(D)
Subpart Q (1910.251 – 255) (A)&(xiv), (x)(iii)(B) 1910.253(e)(6) (iv) 1910.253 (C), & (c)(1) (iv);
To prevent fires or injury due 1910.255(e) 1910.254 1910.253(a)(4); 1910.254(a)
to use of welding or torch 1910.255 (3); 1910.255(a)(3)
cutting equipment.
Electrical 1910.333(a)(1), (b)(2), (c)(2) 1910.332(b)(2)
1910.331 – 335 1910.334 1910.332(b)(3)
Requirements for working on 1910.335
de-energized or energized
electrical equipment,
including training for exposed
and qualified persons.

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table A. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in General Industry Workplaces*

Relationship to Recommended Practices Core Elements

Hazard Identification and Hazard Prevention and Program Evaluation and
Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Asbestos 1910.1001(j) (2), (j)(8) 1910.1001(k)(7) 1910.1001(j) 1926.1101 (d)
1910.1001 and 1926.1101 1926.1101(k)(9)(vi) 1926.1101(k)(2)(ii), (k)(9)
Requirements applicable to
maintenance of buildings
constructed before 1980 that
may contain asbestos.
Bloodborne Pathogens 1910.1030 (c)(1)(v) 1910.1030(c)(2) & (d)(2)(xiv) 1910.1030(c), (d) 1910.1030(g)(2) 1910.1030 (c)(1)(iv)
1910.1030 (B)
Safe practices for workplaces
with reasonably anticipated
contact with blood.
Chemical Hazard 1910.1200(e) (1) & (h)(3)(ii) 1910.1200(h) (3)(iii) 1910.1200(h) 1910.1200 (e)(2)
Communication
1910.1200
Requires sharing chemical
hazard information.
*This table includes commonly applicable OSHA standards that contain elements that relate to program management (e.g., ladders). It also includes less commonly applicable standards that follow a more robust program management model (e.g., process
safety management).

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table B. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in Construction Workplaces*

Relationship to Recommended Practices Core Elements

Hazard Identification and Hazard Prevention and Program Evaluation and
Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Injuries and Illness 1904.32(b)(3) 1904.35
1904
Applies to recording and
reporting of occupational
injuries and illness
General Provisions 1926.20(b)(2) 1926.20 1926.20(b)(4), (f)(2)
Subpart C 1926.25 1926.21(b)
Describes general obligations 1926.26 1926.35(e)
of employers to identify 1926.28
hazards, and ensure safe 1926.34
working conditions and 1926.35
training.
Health and Environmental
Controls Subpart D
This subpart addresses
control of health hazards
such as noise and lead. This
section contains a number
of regulations requiring a
comprehensive program.
Many of these are highlighted
below.
1926.50(c)
Medical Services and First
Aid
1926.50
Applies at sites more than
3-4 minutes from emergency
care. Where this standard
applies, the Blood-borne
Pathogens rule also applies
(see 1910.1030 in General
Industry Table).

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table B. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in Construction Workplaces*

Relationship to Recommended Practices Core Elements

Hazard Identification and Hazard Prevention and Program Evaluation and

Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Chemical Hazard 1910.1200(e) (1) & (h)(3)(ii) 1910.1200(h) (3) (iii) 1910.1200(h) 1910.1200 (e)(2)
Communication
1926.59 and 1910.1200
Requires sharing chemical
hazard information.
Lead 1926.62(o) 1926.62(d), (e)(2)(iii), (m) 1926.62(e), (f), (g), (h), (i), 1926.62(l) 1926.62(e)(2) (v),(3) 1926.62(e)(2) (ii)(H)
1926.62
Applies to construction
activities where workers may
be exposed to lead.

Process Safety 1926.64(c) 1926.64(d), (e), (i), (l), (n), (o) 1926.64(e), (f), (j), (k), (m)(5) 1926.64(g) 1926.64(l) 1926.64(h)
Management
1926.64
To prevent or minimize
the consequences of a
catastrophic chemical
release. Applies to chemicals
above specified threshold
quantities, and extremely
flammable gases or liquids
not used for fuel.

Hazardous Waste
Operations and Emergency 1926.65(b)(1) (ii), (b)(2)(ii) 1926.65(c), (l), (m) 1926.65(d), (g), (j), (k), (m), 1926.65(e) 1926.65(o) 1926.65(i)
Response (n)
1926.65
Applies to clean-up
operations at hazardous
waste sites.

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table B. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in Construction Workplaces*
Relationship to Recommended Practices Core Elements
Hazard Identification and Hazard Prevention and Program Evaluation and
Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Personal Protective and 1926.97(c)(2) 1926.95
Lifesaving Equipment 1926.106(b) 1926.97(c)
Subpart E 1926.102
To ensure PPE (footwear, 1926.104
lifelines, hardhats, etc.) is 1926.106
properly selected and used.
Respiratory Protection 1910.134(d) 1910.134(a), (c), (e) – (j) 1910.134(k) 1910.134(l)
1926.104 and 1910.134
To ensure protection from
inhalation hazards and safe
use of respirators.
Welding and Cutting 1926.350(f)(3), (g)(2) 1926.350(d) 1926.350(d)
Subpart J 1926.352(e), (i) 1926.351(d) 1926.351(d)
To prevent fires or injury due 1926.354(a) 1926.352(e)
to use of welding or torch
cutting equipment.
Electrical Subpart K 1926.403(b), (g), (h), (j)(2)(ii) 1926.402 - 408 1926.404(b)(1) (iii)(B)
Addresses electrical 1926.404(a)(1), (b)(1), (d)(2)(ii)
safety requirements for 1926.405(b)(3)
safeguarding employees.
Highlights relating to 1926.416(a)(3)
installation requirements, and 1926.417 1926.416 1926.417
safe work practices are noted 1926.417
here.
Scaffolds Subpart L 1926.451(d)(3) (i), (d)(10), (d) 1926.451 1926.451(a)(6), (f)(7)
This subpart specifies safety (12)(iv), (f)(3) 1926.452 1926.454
requirements for scaffolds 1926.452(t)(2) 1926.453
and aerial lifts, and training, 1926.453(b)(2) (i)& (xii)
with highlights presented
here.

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)

 Table B. Relationship of Recommended Practices to Selected Existing OSHA Standards Applicable in Construction Workplaces*

Relationship to Recommended Practices Core Elements

Hazard Identification and Hazard Prevention and Program Evaluation and
Standard and Overview Management Leadership Worker Participation Education and Training Multiemployer Worksites
Assessment Control Improvement
Fall Protection Subpart M 1926.501(a)(2) 1926.501 1926.503 1926.502(k)(10)
Employers have a duty to 1926.502(b) (15), (c)(4)&(5), 1926.502
provide fall protection such as (d)(19)&((21), (e)(9), (k)(10)
guard rails, covers, or lifelines
for employees working
six or more feet above an
unprotected side or edge.
Stairways and Ladders 1926.1053(b) (15) 1926.1051 1926.1060
Subpart X 1926.1053(b)
Inspection and safety use
requirements for portable and
fixed ladders.
Toxic and Hazardous 1926.1101(o) 1926.1101(f)(6) 1926.1101(f), (k)(6) – (8), 1926.1101(e), (g), (h), (i), (j), (l) 1926.1101(g)(5)(v), (k)(9), (o) 1926.1101(d), (k)(2) – (4)
Substances Subpart Z (4)
To protect employees from
health hazards.

Asbestos
1926.1101
Applies to construction
activities where workers may
be exposed to asbestos.
Confined Spaces 1926.1204(h) 1926.1204(h) 1926.1203(a), (b) 1926.1203 1926.1204(h) 1926.1204 (m), (n) 1926.1203(h)
Subpart AA 1926.1205 1926.1212 1926.1204(b), (e) 1926.1204(a), (c), (d), 1926.1207 1926.1205(f) 1926.1204(k)
To protect employees 1926.1206(g) 1926.1206 1926.1205 1926.1208(a)
entering spaces that 1926.1206
may contain a hazardous
atmosphere or other serious
hazard.

*This table includes highlights of selected commonly applicable OSHA standards that contain elements that relate to program management (e.g., ladders). This also includes less commonly applicable standards that serve as an example of robust program
management (e.g., process safety management).

U.S. Department of Labor n www.osha.gov n (800) 321-OSHA (6742)