Scribd Logo
Upload

Welcome to Scribd!

  • 64 views

    db 25 mm A 490.8739 I 19174.76 E 200000 q 150 1471.5 N/m² sx 1000 mm sy 600 mm P 882.9 N x 300 mm h 2000 mm δmax 0.129501 mm < 4mm (OK) mm² mm⁴ N/mm² kg/m² sy P

    Uploaded by

    solidramen
    The document describes performing checks on the design of a bar chair and a samurai panel beam. For the bar chair, the maximum deflection is calculated to be 0.129501 mm which is less than the allowable limit of 4mm. For the samurai panel beam, calculations are shown to check the required reinforcement area and moment capacity against the factored loads on the beam. The beam is found to meet the reinforcement requirements.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    db 25 mm A 490.8739 I 19174.76 E 200000 q 150 1471.5 N/m² sx 1000 mm sy 600 mm P 882.9 N x 300 mm h 2000 mm δmax 0.129501 mm < 4mm (OK) mm² mm⁴ N/mm² kg/m² sy P

    Uploaded by

    solidramen
    64 views3 pages
    The document describes performing checks on the design of a bar chair and a samurai panel beam. For the bar chair, the maximum deflection is calculated to be 0.129501 mm which is less than the allowable limit of 4mm. For the samurai panel beam, calculations are shown to check the required reinforcement area and moment capacity against the factored loads on the beam. The beam is found to meet the reinforcement requirements.

    Original Description:

    Bar Chair calculation

    Original Title

    Bar Chair

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes performing checks on the design of a bar chair and a samurai panel beam. For the bar chair, the maximum deflection is calculated to be 0.129501 mm which is less than the allowable limit of 4mm. For the samurai panel beam, calculations are shown to check the required reinforcement area and moment capacity against the factored loads on the beam. The beam is found to meet the reinforcement requirements.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    64 views3 pages

    db 25 mm A 490.8739 I 19174.76 E 200000 q 150 1471.5 N/m² sx 1000 mm sy 600 mm P 882.9 N x 300 mm h 2000 mm δmax 0.129501 mm < 4mm (OK) mm² mm⁴ N/mm² kg/m² sy P

    Uploaded by

    solidramen
    The document describes performing checks on the design of a bar chair and a samurai panel beam. For the bar chair, the maximum deflection is calculated to be 0.129501 mm which is less than the allowable limit of 4mm. For the samurai panel beam, calculations are shown to check the required reinforcement area and moment capacity against the factored loads on the beam. The beam is found to meet the reinforcement requirements.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 3

    Bar chair deflection check

    db 25 mm
    A 490.8739 mm² P
    I 19174.76 mm⁴
    E 200000 N/mm²
    q 150 kg/m²
    1471.5 N/m² h
    sx 1000 mm sy
    sy 600 mm
    P 882.9 N
    x 300 mm
    h 2000 mm sx
    x
    δmax 0.129501 mm
    < 4mm [OK] Plan Detail
    Samurai Panel beam design check
    Beam
    w 250 mm
    h 400 mm
    l 2250 mm
    Rebar
    Top 2 16 mm
    Bottom 2 16 mm 402.1239 mm²
    Stirrup 250 10 mm

    Load Data
    Scaffolding
    Main frame 2 11.50 23.00 kg
    Cross brace 2 2.50 5.00 kg
    Jack base 4 4.00 16.00 kg
    Catwalk 2 14.00 28.00 kg
    Railling (d60, t 8.8 5.54 48.73 kg
    Workers 4 150.00 600.00 kg
    Pl 180.18 kg
    Panel
    Unit weight 58.00 kg/m²
    w 2250.00 mm
    h 3950.00 mm
    ql 229.10 kg/m
    Beam
    l 1900 mm
    Pd 228.00 kg

    Structure model
    Pl1 Pd Pl2

    ql

    725
    425 1400 425
    2250

    Calculation
    Mu 642.08 kgm
    6298805 Nmm
    h 400 mm 400
    s 55 mm
    d h - s - 1/2.db d
    d
    337.00 mm 250

    fc' 35 MPa
    fy 390 MPa

    β1 0,85 - 0,005 (fc' - 28)


    0.815
    Rn Mu / φbd2
    0.069
    ρb "0,85 . β1 . fc′" /"fy" "600" /"600+fy"

    0.03768
    ρmax 0,75 . ρb
    0.02826
    ρmin 1,4/fy
    0.00359
    ("0,85 . f" "c" ^"′" )/"fy" ("1 −" √(1−"2Rn" /"0,85 . fc′" ))
    ρ

    0.00018 < ρmax & ρmin → use ρmin

    Asr ρ . b .d
    302.4359 mm2

    Check Asr < As OK

    You might also like