Scribd
Upload
406 views1 page

XC4418 dataSheetMain PDF

This document provides information about an 8 channel relay board module. It can switch up to 8 external devices with each channel able to switch 10 amps. The module is powered by 12VDC and uses 5VDC logic levels to control the relays. It measures 135mm x 50mm x 19mm and includes jumper leads. Optional accessories include a 12V power supply.

Uploaded by

ikiakun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
406 views1 page

XC4418 dataSheetMain PDF

This document provides information about an 8 channel relay board module. It can switch up to 8 external devices with each channel able to switch 10 amps. The module is powered by 12VDC and uses 5VDC logic levels to control the relays. It measures 135mm x 50mm x 19mm and includes jumper leads. Optional accessories include a 12V power supply.

Uploaded by

ikiakun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

XC-4418

8 Channel Relay
Board
Type: Module

Application: Add On Module


Switch up to 8 external
devices.

Dimensions: 135(L) x 50(W) x 19(H)mm

8 Channel Relay Board Overview:

These handy relay modules provide the easiest way to


Specifications use your Duinotech to switch real world devices. Available
8 Channel Relay Board in one, four and eight channel versions, these modules
Relay Type SPDT can switch up to 10A per channel. Includes back-EMF
Current Rating 10A @ 240VAC, 10A @ 30VDC protection and LEDs so you can easily see the state of
Operating Voltage 12VDC the outputs. The four and eight channel versions even
Logic Voltage 5VDC Logic have optical isolation to protect your Duinotech. The one
Dimensions 135(L) x 50(W) x 19(H) channel and four channel version operate directly from 5V.
Additional Features Optical isolation

Pinout
Module Duinotech Function What is included: 1 x 8 Channel Relay Board
VCC MC 12v Supply
GND GND Ground connection
Essential Jumper Leads (WC6028)
In 1 D2 Relay 1 Control
Accessories:
In 2 D3 Relay 2 Control
In 3 D4 Relay 3 Control
Optional 12V Plug Pack (MP3486)
In 4 D5 Relay 4 Control Accessories:
In 5 D6 Relay 5 Control
In 6 D7 Relay 6 Control
In 7 D8 Relay 7 Control
In 8 D9 Relay 8 Control Did you know:
If you are supplying 12v to your Duinotech
Please note that VCC must be connected to a 12v power supply to board via the DC jack you can feed 12v to the
operate relay board via the VIN pin on the Duinotech
8 Channel Relay Board Sample Projects: board

Distributed by:
TechBrands by Electus Distribution Pty. Ltd.
Ph: 1300 738 555
www.techbrands.com
Made in China

You might also like