BEIJING EPSOLAR TECHNOLOGY CO., LTD. Website：www.epsolarpv.

com Tel：010-82894112 / 82894962 Fax：010-82894882

High Efficiency LED Driver

DCCP Series

Thank you very much for purchasing this DCCP product! Please read
this manual carefully and thoroughly before using the product.

Features
●Wide input voltage range: DC 8V ~ 32V, compatible with 12V/24V
full voltage range
●High-precision constant current control ,control precision less than
±2％
●Advanced high frequency pre-switching off current control for
realization of high conversion efficiency, reliability and stability Diagram 1
●Efficiency is not less than 93% in 12V system, and not less than 95%
in 24V system. The peak efficiency is as high as 96%.
●High-power density design, small volume and easy installation
●Power driven-filter using long-life metalized thin-film capacitor to
assure life span of LED driver
●Output current can be adjusted accordingly within ranges of rated
power and current
●High stability liner PWM duty cycle dimmer control
Solar Charge Controller
●Extensive electronic protection: input polarity reverse protection,
output short circuit protection and output open circuit protection + -
OUT
●Industrial grade working temperature : - 40℃ ~ + 65 ℃ LOAD
PWM
+ - -
LED source
●PCB resin treatment for high moisture proof and antifogging + - LDC-01
Input
+
●Natural cooling IN
●Optional LED driver controller LDC-01 which can realize max. 4
-timer working. For each timer, 0~9 working hours and 0~100%
Diagram 2
output power is adjustable. The output power can also be adjusted
automatically with changes of battery voltage and temperature (Please Power adjustment
refer to LDC-01 user’s manual) When adjust the output current via potentiometer, the output power
will vary accordingly. Please use a small ‘-’ screwdriver to rotate the
Wiring knob ‘Current adjustment’ as below pictures. Users can adjust the
Typical application wiring diagram shows as below: If no dimmer output power as per actual demands. Please monitor the current with
function need, please refer to Diagram1. If dimmer function needed, high-precision instruments to guarantee the reliability of power
please refer to Diagram 2. Pay more attention to ‘+’ and ‘-’. adjustment.
Clockwise for reducing power: Anticlockwise for increasing power:

Notes: For
testing purpose,
user can adjust the input voltage by power supply instead of battery.
However, please confirm that both input voltage and input current
cannot exceed the specified values (refer to Parameters), otherwise
LED driver may be damaged. For example, when adjust DCCP6060
from 24V,60W to 12V,30W,please adjust the output power to 30W first.
Solar Charge Controller
Then adjust the input voltage to 12V.Because when battery changes,
+ - the current will vary inversely so as to keep the constant output power.
Notes: The default setting for the driver shows as below:
LOAD
-LED source DCCP40： 12V,20W; DCCP60： 12,30W; DCCP100： 12,50W.
Input
+ Parameters
1/4 2/4
 BEIJING EPSOLAR TECHNOLOGY CO., LTD. Website：www.epsolarpv.com Tel：010-82894112 / 82894962 Fax：010-82894882

DCCP Series
Nominal voltage 12V/24VDC compatible
Input voltage range 8 ~ 32VDC
Output current precision ﹤2%
Typical efficiency 12V input：93%；24V input：95%
PWM dimmer control PWM：0% ~ 100%；
Output Power：0W ~ Nominal
DCCP40XX
Type DCCP4040 DCCP4060
Max. output power 12V：20W 24V：40W
Max. input current 2A
Output voltage range： Max. input ~ 40V Max. input ~ 60V
Decided by LED

Output current range 0.3 ~ 2A (Limited by Max. input power)

2/4 2/4
 BEIJING EPSOLAR TECHNOLOGY CO., LTD. Website：www.epsolarpv.com Tel：010-82894112 / 82894962 Fax：010-82894882
DCCP60XX
Type DCCP6040 DCCP6060

Max. output power 12V：30W 24V：60W

Max. input current 3A
Output voltage range： Max. input ~ 40V Max. input ~ 60V
Decided by LED

Output current range 0.3 ~ 3A (Limited by Max. input power)

DCCP100XX
Type DCCP10040 DCCP10060

Max. output power 12V：50W 24V：100W

Max. input current 5A

Output voltage range： Max. input ~ 40V Max. input ~ 60V
Decided by LED

Output current range 0.3 ~ 5A (Limited by Max. input power)

Others
Type DCCP40 DCCP60 DCCP100 DCCP100XX：
Ambient Temp. -40℃ ~ +65℃
Storage Temp. -40℃ ~ +85℃
Humidity 0 ~ 95% N.C.
Enclosure IP30
Altitude ≤5000m
Overall (mm) 101 x 66 x 27 108 x 69 x 27 116x74.5x32.5
Mounting (mm) 93 (vertical) 100 (vertical) 105.8(vertical)
Mounting hole Φ5（R2.46）
Terminal 2.5mm2
Net Weight 80g 95g 162g

Dimensions
DCCP40XX：

Warranty
This series product is warranted to be free from defects for a period of
TWO (2) years from the date of shipment to the original end user. We
will, at its option, repair or replace any such defective products.

•This warranty does not apply under the following conditions:

1. Damage by accident, negligence, abuse or improper use.
2. Input voltage or current exceeding the ratings of product.
3. Unauthorized product modification or attempted repair.
4. Damaged occurring during shipment.
5. Damage results from acts of nature such as lightning, weather
extremes.
6. Irreclaimable mechanical damage.
Final interpretation right of the manual belongs to EPSOLAR. Version Number：V1.1
Any changes without prior notice!
DCCP60XX：

3/4 4/4