O n line U P S

Winner Pro+
• True double-conversion
• Microprocessor control optimizes reliability

U P S
• Input power factor correction
• Output power factor 0.9
• Wide input voltage
• Converter mode available
• ECO mode for energy saving only available for 1-3K models
• Adjustable battery numbers only available for 6K/10K models

O N L I N E
• Generator compatible
• Adjustable charging current via LCD or software (1A ~ 6A) only
available for 6K/10K models
• Emergency power off (EPO) function is only available for
6K/10K models
Winner Pro+ 6K / Winner Pro+ 6KL /
Winner Pro+ 10K
+
Winner Pro+ 10KL Winner Pro 3K Winner Pro+ 2K Winner Pro+ 1K • Comprehensive display allows easy monitoring and access of UPS status

Winner Pro+ Online UPS Selection Guide

MODEL Winner Pro+ 1K Winner Pro+ 2K Winner Pro+ 3K Winner Pro+ 6K (L) Winner Pro+ 10K (L)
PHASE Single phase with ground
CAPACITY 1000 VA / 900 W 2000 VA / 1800 W 3000 VA / 2700 W 6000 VA / 5400 W 10000 VA / 9000 W
INPUT
Nominal Voltage 100/110/115/120/127VAC or 200/208/220/230/240VAC 208/220/230/240VAC
60-150 VAC or 120-300 VAC at 50% load 110-300 VAC (Based on load at 50%)
Input Voltage Range
90-140 VAC or 180-280 VAC at 100% load 176-300 VAC (Based on load at 100%)
Frequency Range 40 Hz ~ 70 Hz 46~54 Hz or 56~64 Hz
Power Factor ≧0.99 @ Nominall Voltage (100% load)
OUTPUT
Output Voltage 100/110/115/120/127VAC or 200/208/220/230/240VAC 208/220/230/240VAC
Voltage Regulation ±1%
Frequency Range (Synchronized Range) 47~ 53 Hz or 57 ~ 63 Hz 46~54 Hz or 56~64 Hz
Frequency Range (Batt. Mode) 50 Hz or 60Hz ± 0.5% 50 Hz or 60Hz ± 0.1 Hz
Current Crest Ratio 3:1
≦ 3 % THD (Linear Load) ≦ 3 % THD (Linear Load)
Harmonic Distortion
≦ 6 % THD (Non-linear Load) ≦ 5 % THD (Non-linear Load)
Transfer AC Mode to Battery Mode Zero
Time Inverter to Bypass 4 ms (Typical) Zero
Waveform (Batt. Mode) Pure Sinewave
EFFICIENCY
AC Mode 88% 89% 90% 92% 93%
Battery Mode 83% 85% 88% 90% 91%
BATTERY
Battery Type 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah 12 V / 9 Ah
Numbers 2 4 6 16 20 16 20
Standard
Typical Recharge Time 4 hours recover to 90% capacity 9 hours recover to 90% capacity
Model
Charging Current (max.) 1.0 A 1A/2A (Adjustable)
Charging Voltage 27.4VDC ± 1% 54.7 VDC ±1% 82.1 VDC ±1% 218.4VDC ±1% 273VDC ±1% 218.4VDC ±1% 273VDC ±1%
Battery Type Depending on the capacity of external batteries
Long-run Numbers 16 ~ 20 (Adjustable)
N/A
Model Charging Current (max.) 1A/2A/4A/6A (Adjustable, 6A is only available for 16pcs batteries)
Battery Type 273 VDC ±1% (Based on 20pcs batteries)
INDICATORS
LCD Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators
ALARM
Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continously sounding
PHYSICAL
369 x 190 x
Standard Dimension, D x W x H(mm) 282 x 145 x 220 397 x 145 x 220 421 x 190 x 318
688
442 x 190 x 688
Model
Net Weight (kgs) 9.8 17 27.6 61 74 66 76
Long-run Dimension, D x W x H(mm) 369 x 190 x 318 442 x 190 x 318
N/A
Model Net Weight (kgs) 12 16
ENVIRONMENT
Humidity 20-90 % RH @ 0- 40°C (Non-condensing) 0-95% RH @ 0-40°C (non-condensing)
Noise Level Less than 50dB @ 1 Meter Less than 55dB @ 1 Meter Less than 58dB @ 1 Meter
MANAGEMENT
Smart RS-232 / USB Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux and MAC
Optional SNMP Power management from SNMP manager and web browser
*1-3KVA: Derate to 80% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 100/200/208VAC
6-10KVA: Derate to 60% of capacity in Frequency converter mode and to 90% when the output voltage is adjusted to 208VAC
Product specifications are subject to change without further notice

Advancing Power 16
 O n lin e U P S

Winner Pro+ Rack Tower/Rackmount

• True double-conversion
• Microprocessor control optimizes reliability
• Input power factor correction
U P S

• Output power factor 0.9

• Wide input voltage range
• Converter mode available
Winner Pro+ 1KRT/2KRT/3KRT • ECO mode for energy saving only available for 1-3K models
• Adjustable battery numbers only available for 6K/10K models
• Generator compatible
O N L I N E

• Adjustable charging current via LCD or software (1A~6A) only available for
6K/10K models
• Emergency power off function (EPO) only available for 6K/10K models
Winner Pro+ 6KR (L) • Comprehensive display allows easy monitoring and access of UPS status
Winner Pro+ 10KR (L)

Winner Pro+ Rack Tower/Rackmount Online UPS Selection Guide

MODEL Winner Pro+ 1KRT Winner Pro+ 2KRT Winner Pro+ 3KRT Winner Pro+ 6KR (L) Winner Pro+ 10KR (L)
PHASE Single phase with ground
CAPACITY 1000 VA / 900 W 2000 VA / 1800 W 3000 VA / 2700 W 6000 VA / 5400 W 10000 VA / 9000 W
INPUT
Nominal Voltage 100/110/115/120/127VAC or 200/208/220/230/240VAC 208/220/230/240VAC
60-145 VAC or 120-300 VAC at 50% load 110-300 VAC ± 3% at 50% Load
Input Voltage Range
90-145 VAC or 180-300 VAC at 100% load 176-300 VAC ± 3% at 100% Load
Frequency Range 40Hz ~ 70 Hz 46Hz ~ 54 Hz or 56Hz ~ 64 Hz
Power Factor ≧ 0.99 @ Nominal Voltage (100% load)
OUTPUT
Output Voltage 100/110/115/120/127VAC or 200/208/220/230/240VAC 208/220/230/240VAC
Voltage Regulation ± 1% ± 1%
Frequency Range (Synchronized Range) 47~ 53 Hz or 57 ~ 63 Hz 46Hz ~ 54 Hz or 56Hz ~ 64 Hz
Frequency Range (Batt. Mode) 50 Hz ± 0.25 Hz or 60Hz ± 0.3 Hz 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio 3:1
≦3 % THD (Linear Load), ≦3 % THD (Linear Load),
Harmonic Distortion
≦6 % THD (Non-linear Load) ≦5 % THD (Non-linear Load)
Transfer AC Mode to Battery Mode Zero 0ms
Time Inverter to Bypass 4 ms (Typical) 0ms
Waveform (Batt. Mode) Pure Sinewave
EFFICIENCY
AC Mode 88% 89% 90% 92% 93%
Battery Mode 83% 87% 88% 90% 91%
BATTERY
Battery Type 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH 12 V / 9 AH
Numbers 2 4 6 16 pcs 20 pcs 16 pcs 20 pcs
Standard Typical Recharge Time 4 hours recover to 90% capacity 9 hours recover to 90% capacity
Model Charging Current 1.0 A 1A/2A (Adjustable)
218.4VDC 273 VDC 218.4VDC 273 VDC
Charging Voltage 27.4VDC ± 1% 54.7 VDC ±1% 82.1 VDC ±1%
± 1% ± 1% ± 1% ± 1%
Battery Type Depending on applications
Numbers 16 - 20 pcs (Adjustable)
Long-run 1A/2A/4A/6A (Adjustable,
Charging Current (max.) N/A
Model 6A is only available for 16pcs batteries)
Charging Voltage 218.4 VDC ± 1% (Based on 16pcs batteries)

INDICATORS
LCD Panel UPS status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions
ALARM
Battery Mode Sounding every 4 seconds
Low Battery Sounding every second
Overload Sounding twice every second
Fault Continuously sounding
PHYSICAL
UPS Unit: UPS Unit: UPS Unit:
500x438x88 [2U] 500x438x88 [2U] 580x438x133[3U]
Dimension, D x W x H(mm) 310 x 438 x 88 [2U] 410 x 438 x 88 [2U] 630 x 438 x 88 [2U] Battery Pack: Battery Pack: Battery Pack:
Standard 668x438x88 [2U] 580x438x133 [3U] 580x438x133 [3U]
Model
UPS Unit: 15 UPS Unit: 15 UPS Unit: 18 UPS Unit: 18
Net Weight (kgs) 12 19 29.3 Battery Pack: Battery Pack: Battery Pack: Battery Pack:
48 61 51 61
Long-run Dimension,D x W x H(mm) 500 x 438 x 88 [2U] 580 x 438 x 133[3U]
N/A
Model Net Weight (kgs) 15 18
ENVIRONMENT
Humidity 20-90 % RH @ 0- 40°C (non-condensing) 0-95 % RH @ 0- 40°C (non-condensing)
Noise Level Less than 50dB @ 1 Meter Less than 55dB @ 1 Meter Less than 58dB @ 1 Meter
MANAGEMENT
Smart RS-232 / USB Supports Windows® 2000/2003/XP/Vista/2008, Windows® 7/8, Linux and MAC
Optional SNMP Power management from SNMP manager and web browser
*Derate to 80% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 100/200/208VAC
Product specifications are subject to change without further notice

17 www.voltronicpower.com